How to install ASM on 11gR2 on Windows?

hi *
can you suggest me how to install ASM instance with 11g R2 software ?
I don't need grid software as a whole.
My goal is to set standalone DB based on ASM storage.
In database server software (DBCA) I cannot choose "create ASM instance" . It's not there.
So I suppose I need to install some of grid software. But which part of it is sufficient that allows to configure ASM afterwards??
there are options:
- Installing and Configuring the Grid Infrastructure for a Standalone Server
- Installing and Configuring the Grid Infrastructure for a Cluster
- Upgrade Grid Infrastructure
- Install Grid Infrastructure Only

g777 wrote:
hi *
can you suggest me how to install ASM instance with 11g R2 software ?
I don't need grid software as a whole.
My goal is to set standalone DB based on ASM storage.
In database server software (DBCA) I cannot choose "create ASM instance" . It's not there.
So I suppose I need to install some of grid software. But which part of it is sufficient that allows to configure ASM afterwards??
there are options:
- Installing and Configuring the Grid Infrastructure for a Standalone Server
- Installing and Configuring the Grid Infrastructure for a Cluster
- Upgrade Grid Infrastructure
- Install Grid Infrastructure OnlyFrom 11.2 onwards, ASM installation needs as a mandatory thing Grid Infrastructure. So if you want ASM,there can't be any thing else which you cna do except installing the Grid Infrastructure. The ASM maintenance has been removed from DBCA and is given now inthe ASMCA(ASM Configuration Assistant) which can only be run from Gird Infra home. So in short, the answer for your question is that you must install Grid Infrastructure if you want ASM , be it Windows or whatever o/s.
HTH
Aman....

Similar Messages

  • How to install a fresh copy of windows xp with sp2 on a msi k8t neo

    My specifications:
    CPU: AMD ATHLON 64 - 3000MHZ
    MOTHERBOARD: MSI K8T NEO
    RAM: CRUCIAL MICRON 1024MB DDR
    HDD: WD 120GB ( C: 60GB, D: 60GB )
    HDD: SEAGATE 4GB ( E: 4GB )
    DVD: NEC 3520
    CD: SONY
    The system is on drive C:
    primary master HDD 4GB ( on drive E: )
    primary slave NONE
    secondary master CDR DVD-RW
    secondary slave CDR SONY
    and last HDD 120GB on primary raid ( on drive C: and D: )
    NONE on secondary
    I have 2 floppy disks: on the first one it says G72-PRSA060, Promise 376/378 Driver, Disk 1 of 1
    on the second one it says G72-VASA040, VIA SATA RAID Driver, For VT6420/VT8237, Disk 1 of 1
    Can please someone tell me how to install a fresh copy of windows xp on my computer from scratch? All I know that I have to press F6 at some time and insert one of the disks but I don't know which one. And I don't know when to insert a second disk.
    Thanks for helping me

    Yeah.  I remember when I had that board.  I found the best SATA ports were the Promise ones, but...
    What do you think, Tiresmoke?  You had the same board too if I'm not mistaken.

  • How to install adobe flash player in windows 8?

    how to install adobe flash player in windows 8?

    Windows 8 includes Flash Player for IE. You can update it through WIndows update. If you're unsuccessful, download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)

  • How to install adobe pagemaker 7 in windows 7

    how to install adobe pagemaker 7 in windows 7

    Pagemaker 7 has compatibility issues with Windows 7. You can try, but I expect the installer will not work properly.
    Either move on to InDesign or keep PM7 on your WinXP setup.
    You can also try run the application in Xp compatible mode.

  • How to install hp deskjet 3900 in windows 8

    Please let me know how to install hp deskjet 3900 in windows 8

    Hi, take a look at this HP link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How to install internet explorer 8 in windows 8 pc.

    how to install internet explorer 8 in windows 8 pc.

    Hi,
    Internet Explorer 8 is not compatible to install in Windows 8/8.1 PC.
    As Rob suggested, we could use Internet Explorer 10 (In Windows 8) or Internet Explorer 11 (In Windows 8.1) developer tools to emulate IE8,
    Using the F12 developer tools; Or build a Virtual Machine.
    Besides, here is the download page:
    Internet Explorer 8
    http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx
    Best regards
    Michael Shao
    TechNet Community Support

  • How to install ios back i have windows 7?

    how to install ios back i have windows 7

    I don't understand your question.  You mention iOS (iPhone, iPod Touch, and iPad OS) but you say you have Windows 7, and not which of the devices you want to upgrade to iOS 7.  Your question about installing iOS 7 is probably best asked on one fo the forums for your iOS device, like the iPhone, iPad or iPod Touch forums.

  • How can install adobe flash player for windows 8 pro internet explorer

    how can install adobe flash player for windows 8 pro internet explorer
    how can instal flash player for internet explorer metro ui 
    where can i watched video tutorial for this or help me please

    I can't tell from the screenshot, but it's possible you are running in the Metro version.  Could you try this page using Internet Explorer in desktop mode to see if that helps?
    right click in the browser and click the tools button
    In the menu that appears, select "view on the desktop"
    Once IE launches in the window, do you see your Flash content?

  • How to instal developer forms6.0 on windows 98

    sir,
    may i know how to instal forms 6.0 on windows 98 with full information.

    Keith you maybe facing an issue with trying to install Photoshop CS2 on Windows 7 in general.  If you have both serial numbers registered, and one of them is a full version, then you can request that your software be unlocked to allow for installation.  Our support team will better be able to determine your eligibility for this.  You can contact them via chat at http://adobe.ly/yxj0t6.

  • How to install AdobeAIRSDK 2.7 on windows 7(help)

    How to install AdobeAIRSDK 2.7 on windows 7 on flash cs5 ver11

    Thanks.
    2011/9/21, chris.campbell <[email protected]>:
    chris.campbell http://forums.adobe.com/people/chris.campbell created the
    discussion
    "Re: How to install Air 2.7 on mac ?"
    To view the discussion, visit:
    http://forums.adobe.com/message/3927906#3927906

  • How to install Cisco Device Manger on Window 7

    Hello
    Is Cisco device manager supported on windows 7 ?
    If yes how to install Cisco Device Manger on Window 7?
    Please advise
    Thanks
    Chetan R

    You can install the latest DCNM 5.x  for support, please see here:
    http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp179665
    Support for Windows 7 and Windows 2008
    In Cisco DCNM Release 5.1(3u), the Cisco DCNM server supports Windows 2008 and the Cisco DCNM client support Windows 7.
    You can download the DCNM from the Software Download. Device Manager is bundled in DCNM.
    For DCNM-SAN installation please see here:
    http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/installation/guide/inst_troubleshoot.html
    I hope this helps.
    Carlos

  • Kindly provide me how to install odi in my pc windows 7 64bit

    Hi all,
    Plz kindly provide me how to install odi in my lap windows 7 64bit and do we have option to install odi in windows7?
    In windows 7 i already installed oracle 10g database and downloading ODI 11.1.1.5.0 version from oracle site.
    Its a urgent process to me and thanks in advance and guide me .

    Hi,
    for Windows x64 be aware of these pitfalls:
    - you need the "generic" Java version of ODI, not the Windows one (which target x86)
    - you need a 64 bit Java Virtual Machine to run the setup
    - you need a 32 bit Java Virtual Machine to run the application (ODI Studio) after installation complete
    I used JRockit (Java Virtual Machine), and with default settings the JRockit installer overwrite previous installations, even for different processor architecture (ie 32 bit installation overwrite 64 bit).
    So to me the following worked:
    - Install JRockit 64 bit
    - Run ODI installation
    - Install JRockit 32 bit
    - Run ODI Studio.
    Hope it helps,
    Corrado

  • How to install hp laserjet 1020 on windows xp

    sir, i want to install hp laserjet printer on windows xp. it is displaying an error message "inappropriate invocation.unable to start application".
    plz tell me what to do and how...

    Hello priyasim,
    Welcome to the HP Forums! I understand you are receiving a message "Inappropriate invocation, unable to start application". I will try my best to help you resolve this issue.
    I would recommend following this Microsoft document on You Are Unable to Start a Program with an .exe File Extension. If you are still unable to install the Laserjet 1020, then you would have to perform a clean install of Windows.
    Please post your results, as I will be looking forward to hearing from you.
    I worked on behalf of HP.

  • How to install oracle10g grid control on windows

    i want,
    how to install oracle10g R3 grid control on windows
    in my server ,i have 4 database ..oracle10g R2 ..is running...

    http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

  • How to install SharePoint server 2013 in windows server 2012 R2

    Hi,
    I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
    Can you guide me on how to install it?,
    or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
    thanks in advance.

    Hi,
    Now I could install SP 2013 following this article
    http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
    I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
    Thanks everyone.

Maybe you are looking for

  • Cannot send mail from .mac account in Entourage

    I am a new mac user so my troubleshooting skills are very weak. Until about one week ago, i was able to send mail from both my hotmail account and my .mac account. Now, i get this error (just on my .mac account): An operation on the server timed out.

  • HP LTO-3 support in Solaris 10

    What is the bare *minimum* Solaris 10 core release and/or patch revision required in order to support HP LTO-3 drives natively (no st.conf modifications)? I was unable to find this info anywhere in a search of SunSolve & the Sun site. However, there'

  • Flash player crashes in IE7 Beta 3

    I have a couple of computers with XP Pro (all fully patched) with Beta 3 of IE7. The Flash Player ocx is crashing frequently but most often when looking at Flex 2 sites. All seems pretty fine in Firefox but that is not the answer as I am looking at d

  • Duplicate a text field in LC & get the Text automaticaly in the 2nd

    Hi I want to duplicate a text field the problem is that i want something more when i write in the first "Text Field" i would like that the same Text appears automaticaly in the second "Text field"  We can do it in Acrobat Pro but i don't know in LC T

  • Web Logic Server Crash

    Hi,           We have large enterprise application running on WebLogic Server           6.1sp1 with JSPs, EJBs and MQ Series Queues. After server started, it is           crashing with an Exception when it tries to compile JSP page while it is