How to Install Avermedia H339 Hybrid Digital/Analogue TV Card

Hi everyone
I want to know How to Install Avermedia H339 Hybrid Digital/Analogue TV Card driver on Arch.
this card is included in some XPS L502x Models.
Thanks

That appears to be a PCIe card.  It is also EOL (End of life)    The other models are all USB.
Can you verify that it shows up in lspci -nn and and you provide the VID:PID  (The two four digit hexadecimal numbers in brackets separated by a colon)
I ask, because I don't see direct support in the kernel for that manufacturer, but they may be using a generic chip set.
Also, in the AUR, we have
ewaller@turing ~/devel/build/linux-3.18.1 1023 %packer -Ss avermedia
aur/a800-fw 1.0-1 (4)
Firmware for AVerMedia AverTV DVB-T USB 2.0 (A800)
aur/a850-fw 1.0-2 (3)
Firmware for AVerMedia AverTV Volar Black HD DVB-T USB 2.0 (A850)
aur/dvb-usb-af9035-git 20121217-3 (2)
An open-source driver for DVB-T cards based on AF9035 chipset, like AverMedia A867/A865
aur/avermedia_a867 1.0.28-7 (1)
Avermedia A867 DVB-T USB (also known as Sky Digital Key in Italy) Kernel Module
ewaller@turing ~/devel/build/linux-3.18.1 1024 %
You might try one of those.  YMMV.

Similar Messages

  • How to install a self-signed Digital certificate in messenger express

    I have Java Enterprise System 2003 and I can not buy a commercial certificate so I generated a certificate with keygentool from java but I don't know how to install this certificate in the messenger express http server. Could you tell me what config file do I have to change and where to put the certificate?
    I can't find documentation about this.

    http://docs.sun.com/source/817-6266/security.html#wp13035

  • How to install a self signed digital certificate onto ipad?

    i want to convert my home wifi from wpa2 personal mode to wpa2 enterprise. i have a 1st gen ipad mini with ios8.1.2.

    http://docs.sun.com/source/817-6266/security.html#wp13035

  • How to Install the CAP file on the Java Card

    Hi guys. I've already written and tested a java card applet. Now i want to put the CAP file on the card. Could anyone please tell me the procedures or direct me to where i can find the procedures on how to do this?
    Thanks

    I suggest you search this forum. That question has been answered a lot.
    1) If you are using a pure Java Card use scriptgen tool and send those commands to the card.
    2) If you are using a Java Card with Global Platform
    A) Follow the Global Platform specs and authenticate to the card with developer keyset(0x40,0x41,0x42,0x43...0x4f)
    b) Get a kit
    Since you are a beginner, I recommend you get the a kit like JCOP or one from card vendors like G&D, Gemplus, etc.

  • How to install the iPhone 5 without a SIM card?

    Wie kann man das iPhone 5 ohne SIM Karte aktivieren?

    No. You cannot activate the phone without a SIM.

  • How to install adobe digital editions on android device (zt pad)

    how to install adobe digital editions on android device (zt pad)

    I don't think ADE will itself run on Android.
    You need to install an app such as Bluefire (free) which supports DRM epub books.
    Make sure you authorise it with the same AdobeID you use on the PC or to buy books.
    You can get books on the PC with ADE, download them, 'sideload' the .epub files to the tablet using a file manager such as Windows Explorer, and read them on Bluefire.
    For library books, the Overdrive app (free) should allow you to borrow, doanload and read books with no need for a PC or ADE.

  • I have bought a digital book and I dont know how to install it in my ebook; need MDR how?

    I have bought a digital book and I dont know how to install it in my ebook; need MDR? how can I get it?

    There are, unfortunately, many different kinds of digital book. Some of them need special software. Some of them only work with particular kinds of computer or tablet. You need to follow very carefully the instructions on the site that sells it.
    Warning: avoid ebooks with type EXE.
    Avoid software to read ebooks that you would not trust very strongly.

  • How to use Avermedia TV Tuner Card

    How to get Avermedia card to work on HP desktop and be able to use only one remote for sound and channel changing.
    Adventures with a new HP "All In One" 23Z Pavilion computer
    OLD PC - Some history first. We had an older (2008) hp all in one desk top with a touch screen. It had Windows Vista and it was getting harder to keep updated. This computer came with a built in TV card, IR receiver, and IR blaster output port and accompanying cable. We have Comcast service and have the upgraded digital set top box. We used Windows Media Center(WMC) to watch TV on the computer. We configured WMC so it would understand the Comcast remote's commands and transmit them over the IR blaster to the Comcast box. We taped the outboard end of the IR blaster cable to the front of the Comcast box, directly in front of the IR receiver eye. We were able to use the remote provided by HP to change channels and adjust volume, and mute. (All the commands we needed to watch TV). WMC had some basic record and play facilities that we seldom used.
    NEW PC - We decided to upgrade to a new computer and got the latest HP pavilion all in one desktop. It originally came with windows 8.1 which we later upgraded to 8.1 pro. HP support told us that we needed 8.1 pro to get WMC. More on WMC later. We got an Avermedia card with the new all in one desktop computer. It worked fine with the Avermedia software. Although, we had to use 2 remotes, one for the Comcast box to change channels and one for the HP computer to change volume and mute. We got the Avermedia TV player version 1.8.1 with the Avermedia H8370 USB Hybrid ATSC/QAM card. The Avermedia TV player was easy to configure.
    We got WMC for windows 8.1 pro and hoped we could configure it like our old computer to work with one remote. When we tried to configure WMC, it stopped and would go no further without an IR receiver. Since the new computer came with a remote, we thought it had an IR receiver built in, and so did HP. Come to fine out, the remote works in conjunction with the keyboard and mouse, wirelessly. It doesn't work when the wireless receiver is unplugged from the USB port. There is no on board IR receiver in the new computer. We were looking on line and found a USB connecting IR receiver that has an HP brand name on it and comes with a remote and IR blaster that should allow it to transmit the IR signal to the Comcast box. (like our old setup) We ordered it and installed it. It did not require drivers to be installed with it. We went back to configuring WMC and got past the "no IR receiver message" and after several tries at configuring the Comcast remote(eventually with some success), finally got a "display driver error, the video playback device does not support playback of protected content.", and we could go no further. Comcast broadcast signals are encrypted, but not protected. Also, the Comcast box is hooked to the Avermedia stick by a coax cable that broadcasts on channel 3. I would expect this kind of error if we fed the Comcast cable directly into the Avermedia card. Anyway, while playing with WMC to get the right remote signals and configurations, I noticed that the Comcast remote would now adjust the volume on the HP computer. It's working through the new IR receiver. We abandoned WMC and all its issues and are now using the Avermedia software with one (Comcast) remote. We did get an IR extender cable from Comcast that allows remote transmission of the IR signal to the Comcast box. We then were able to mount the Comcast box behind the computer monitor and just stick the IR extender receiving end on top of the computer monitor. All I can figure is that the signals for volume up and down and mute must be common to the Comcast remote and the HP computer. We did not attempt to reconfigure the Comcast remote with any "TV" codes, we are just using the default settings on the Comcast remote.
    All the Comcast functions work normally since we are using the Comcast remote, the only commands we really needed were to control volume and mute on the computer, and this now works. The Avermedia software has some basic recording functions and we now have all the facilities we used to have.
    All we really needed to buy was the IR receiver to make this work. We didn't need the HP remote (we now have 2) and the IR blaster cable that came as a package. The IR receiver was listed as a NEW HP USB MCE IR receiver/Remote Controller/IR emitter Win 7 Vista. We got it from ECHOMAN out of Las Vegas. We found it through Amazon for about $19.00. HP can't find this as a product from their company so don't try. There may be other solutions out there but this worked for us.
    The new HP "All IN One" is not really "All In One". It came with 4 2.0 USB ports and 2 3.0 USB ports. I've had to use 2 of the USB ports to get the TV working and 1 to get the wireless keyboard/ mouse working. The old computer had on-board IR receiver, TV card, and wireless keyboard/mouse receiver and IR blaster port/cable.
    We were very disappointed by both HP sales and service in support of this product. Sales didn't know what they were selling and promised everything and there was virtually no support from the hardware/software support team. We finally did get some support from HP but it was in the form of "Case Manager" when we finally threatened to return the product. HP did give us some help by offering an extended warranty at no cost for all our trouble. We contacted Avermedia for help and they would only refer us back to HP because they were second party retailers. Avermedia did give some support but only after repeated e-mails. All this knowledge was gained through the school of hard knocks and really looks simple when you look back on it.  So we hope this will help someone who finds themselves in our position.
    This question was solved.
    View Solution.

    This problem has been solved.  We sent the Hp computer back and bought a DELL that has an HD port that connects directly to our comcast set top box and we push a button and it goes to HD TV mode and push it again and it goes back to pc mode

  • How to install Windows 8.1 Pro on Macbook Pro

    Hello everyone,
         I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
    After finishing the downloading process, I received this file which is about 4GB large.
    When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
    At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

    You need a 'Full' Installer.
    From Boot Camp 5.1: Frequently asked questions - Apple Support
    Which versions of Windows work with Boot Camp 5.1?
    Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
    Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
    It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

  • How to install this update and solve USB and touchpad issues?

    I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
    Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
    The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
    The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
    This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
    Driver revision history:
    Twinhan VP704A Driver Release note
    Note:
    1.In case the system crashes while running with VP704A, Please install ULI
    USB 2.0 host driver in \ULiUSB20Driver
    2. For XP/SP1, please update with the patch in
    <http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
    3.In XP/SP1, updating driver will crash the system, while new install is ok.
    The trick to update driver in XP/SP1 is shown in the following steps,
    a. Uninstall the driver
    b. Unplug and plug the USB device
    c. Install the driver
    4. To support remote controller, please launch Agent.exe in \Agent.
    Further details can be found in \Agent\Readme.txt
    Known issues:
    1. Multi-instance is not supported
    2. Remote wakeup is not supported
    3. High CPU usage in Analog audio/video capture
    4. Bad VBI Signal using YUY2 color format
    5. AV out of sync if audio captured from wrong filter.
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    6. Noise with analog-TV and FM Radio
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    Driver revision history:
    2005/10/24, Version: 1.0.2.8
    Bugs fixed and new features:
    1.Crossbar not properly set.
    2005/10/21, Version: 1.0.2.7
    Bugs fixed and new features:
    1.Firmware version read from FLASH OK!
    2005/10/14, Version: 1.0.2.6
    Bugs fixed and new features:
    1.Mutil-Access driver blank part below part screen when VBI!
    2.Mutil-Access driver HCT driver verify crash fix!
    2005/10/07, Version: 1.0.2.5
    Bugs fixed and new features:
    1.Tuner Power off when S-Video,Composite.
    2005/09/30, Version: 1.0.2.4
    Bugs fixed and new features:
    1.Agent.exe updated for repeat bug!
    2.TI5150 Register for Video Format fix!
    2005/09/29, Version: 1.0.2.3
    Bugs fixed and new features:
    1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
    Note: "USB Audio device" filter provided by system does not support mutil-Access.
    2.Reset TI5150 when a new frequency is set
    2005/09/27, Version: 1.0.2.2
    Bugs fixed and new features:
    1.Fix I2C unstable access on some devices.
    2005/09/23, Version: 1.0.2.1
    Bugs fixed and new features:
    1.Analog TV becomes darker sometimes.
    2005/09/15, Version: 1.0.2.0
    Bugs fixed and new features:
    1.Fix INF for Windows 2000 installation.
    2.FM radio scan policy changed!
    2005/09/13, Version: 1.0.1.9
    Bugs fixed and new features:
    1.USB serial number string not visible with USBView, firmware update required.
    2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
    2005/09/13, Version: 1.0.1.8
    Bugs fixed and new features:
    1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
    2005/09/12, Version: 1.0.1.7
    Bugs fixed and new features:
    1.Improve channel lock status check performance
    2.Pinnacle INF Fix.
    2005/09/09, Version: 1.0.1.6
    Bugs fixed and new features:
    1.Add some audio initialization function.
    2005/08/31, Version: 1.0.1.5
    Bugs fixed and new features:
    1.NTSC & PAL mode resolution separation.
    2005/08/30, Version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2.Frame Drop.
    3.Pinnacle inf file HCT chkinf fail.
    2005/08/22, Version: 1.0.1.3
    Bugs fixed and new features:
    1.Add Remote controller interface in digital source filter.
    2.A new Remote controller test tool with source code in \Test_RC.
    2005/08/16, Version: 1.0.1.2
    Bugs fixed and new features:
    1.Reorg Pinnacel & Twinhan's driver & folder.
    2.VP704A_BDA_Test tool, add system code test.
    3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
    4.Firmware update
    2005/08/15, Version: 1.0.1.1
    Bugs fixed and new features:
    1.Serial number function is lost while adjusting TV audio volume
    2.RC6A CIR support
    (This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
    The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
    EEPROM should be flashed with \Firmware\M9207.bin )
    3.Serieal number, MAC address and OEM device name supported.
    Please refer to further details in \Firmware\readme.txt.
    4.Ioclt sample source code included.
    2005/08/08, Version: 1.0.0.10
    Bugs fixed and new features:
    1.Analog TV audio volume increase.
    2005/08/04, Version: 1.0.0.9
    Bugs fixed and new features:
    1.Analog TV Video mode set failure.
    2005/08/03, Version: 1.0.0.8
    Bugs fixed and new features:
    1.Off-centerf requency scan +/- 125Khz
    2.Fix duplicated program scanned in MCE.
    2005/08/02, Version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
    2005/07/28, Version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
    2.Improve I2C communication stability.
    3.Unify Signal strength & quality indication as THBda ioctl interface.
    4.Capture filter Lock status check.
    2005/07/28, Version: 1.0.0.5
    Bugs fixed and new features:
    1. The same signal strength & quality indications as VP7046.
    2. Debug build driver
    2005/07/21, Version: 1.0.0.4
    Bugs fixed and new features:
    1.Update INF.
    2005/07/20, Version: 1.0.0.3
    Bugs fixed and new features:
    1.Improve performance in PCM4
    2.Switching from Analog TV Mode to FM Mode failure
    2005/07/04, Version: 1.0.0.2
    Bugs fixed and new features:
    1.Production Tool FM test OK!
    And here is the readme from the other file within the update ?
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
    INTRODUCTION
    This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
    and Windows XP.
    CONTENTS OF THIS DOCUMENT
    1. Installation Instructions
    2. Uninstallation Instructions
    1. Installation Instructions
    (Windows 98 SE & Windows ME)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system,then restart your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows 2000)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows XP)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - Click "NEXT"
    - This program will install and load the driver and you don't have to reboot the
    computer.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller", continue to install.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    Notice:
    If you can't setup driver successfully. Please reboot your system and then follow
    above steps to install driver again.
    2. Uninstallation Instructions
    1. Open "Control Panel" folder.
    2. Invoke "Add\Remove Programs" icon.
    3. Choose "ULi USB2.0 Driver" item.
    4. Click on "Add/Remove" button to remove drivers.
    Change List:
    1.74
    1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
    2.support all USB2.0 Host Controller.
    1.73
    1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
    2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
    3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
    4.fix issue that wirless lan will disconect when plug-in usb device.
    1.72
    1.Fix issue that system will crash when USB HD copy large file.
    1.71
    1.improve Power management function in Win98/ME.
    1.70
    1.Improve the function of devcie detection.
    1.62
    1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
    1.61
    1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
    1.60
    1.To support power management functions when a HUB with USB device plug into
    a root HUB.
    1.57
    1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
    2.Fix issue that audio can't display smooth when USB device attach to system.
    3.Fix system can't detect USB dvice when USB device attach to system in
    suspend mode.
    4.Fix issue that when USB root HUB have full loading, USB HD sometimes
    transaction fail.
    1.56
    1. Fix issue that DVD decoder device can't display properly.
    1.55
    1. Fix OTI USB 2.0 hand drive can't be detect issue.
    2. Fix USB mouse can't use after resume from suspend.
    1.54
    1.Improve driver security.
    1.53
    1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
    2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
    1.52
    1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
    automatically fix file system errors
    2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
    v.1.51
    1. Improve USB 2.0 cardreader compatibility.
    2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
    v1.50
    1. Improve bulk transfer
    v1.48
    1. Fix USB 2.0 LAN driver installation hanging up
    2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
    3. Fix some laptops Win98SE booting hanging up
    v1.47
    1. Improve bulk transfer performance.
    2. Fix USB 2.0 bulk webcam preview failure.
    v1.46
    1. Support USB 2.0 and 1.1 Isochronous devices
    2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
    3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
    4. Improve device detection capability in Win9X/ME
    v1.45
    1. Fix system hanging up when resuming from ACPI sleep mode.
    2. Fix mouse sometimes doesn't disappear when it's unplugged.
    3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
    v1.44
    1. Support composite device
    2. Improve device detection
    v1.43
    1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
    2. Fix high-speed device detected as full-speed device
    3. Fix some USB mouses detection failure problem
    4. Fix some USB 2.0 hubs detection failure problem
    5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
    v1.42
    1. Fix PC Card ejection hanging up in Win98/ME
    2. Fix suspend/resume hanging up in Win98
    3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
    4. Fix some PC Card USB 1.1 device detection failure
    v1.41
    1. Add new feature that system can install driver before device is plugged.
    2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
    v1.40
    1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
    2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
    v1.32
    1. Fix issue that driver can't detect Microsoft driver in Windows XP
    if OS path is not c:\windows.
    2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
    v1.31
    1. Fix issue that driver can't install on Windows 2000.
    v1.30
    1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
    2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
    3. Fix issue that sometimes when you click "Scan for hardware changes".
    to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
    file can't be found.
    4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
    verison of ULi EHCI controller devices are plugged and unplugged.
    5. Support installing driver for more than one ULi EHCI controller devices existing on
    system at the same time.
    6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
    v1.20
    1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
    ULi Coporation. (ULi) web sites:
    http://www.uli.com.tw/ (Taiwan)
    CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
    i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

    It says above 2 relevant and 1 correct answere available .............
    I'm new here so could anyone direct me to these answeres?

  • How to Install Windows 7 Without the Disc

    1a)  Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
    "Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
    1b)  Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
    1c)  Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
    1d)  Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
    2)  Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
    Good luck.
    Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
    Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg  from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
    Direct link to Windows 7 USB/DVD Download tool.
    <Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
    EDITED by Frank on 8/28/2013
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

    ervis,
    Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
    The information in the document referred you to applies to several different "types" of installations;
    Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
    If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
    The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
    with the key erased or Xed out.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to install windows 7 on macbook properly?

    Hello there;
    I've macbook 2007. I bought it used and it had windows 7 installed on it.
    something went wrong with the W7 and had to reinstall a fresh one one.
    I booted from W7 DVD and reinstalled the windows, everything is ok. network - wireless - graphic but only one thing went wrong.
    there was no sound, and there's a red led in audio jack. I googled for 6 hours trying to figure it out. and I've tried litteraly EVERYTHING people said about it.
    but that Led didn't turn off, and yet the sound didn't work.
    and then I heard something about BootCamp that helps with messed up drivers and I downloaded it but it didn't work on windows, it says it must be installed on MAC but I don't have MAC now.
    1- Is there a way to fix that sound issue without reinstalling windows? :-s I've really tried almost everything
    2- if no, How can I install mac, which version should I install? where to get it? how long will it take? then how to install W7 again from it?
    thanks in advance
    hope anyone can help with this.
    Bye

    That is odd if the codec's didn't work, but if there's a red light in the audio jack then it's most likely the sensor is fudged. Check this post from macrumors: I found a fix for the red light problem. I'm not sure if I like it, but it works. After reading forum thread after forum thread of users that had this problem, I found a dude who fixed his jack with a rubber ended bobby pin. It seems a sensor gets bent (?) and the system thinks your digital external line is still plugged in. I took the butt end of a matchstick and tickled inside the jack. My red light went out. My internal speakers work again.
    http://forums.macrumors.com/archive/index.php/t-237405.html
    Searching online seems to all point to a sensor most likely being the issue for the audio if there's a redlight showing. Your drivers could actually be fine, but won't matter if that sensor is damaged/loose. Are you getting sound from normal uses (youtube etc)?
    Pry won't matter but did you try in a VM as well? I have Win7 on VirtualBox (free).

  • How to install new fonts using code in java?

    Hi,
    How to install font in a system using java, provided i know the font file's address. Is there any specific class/method available for this purpose? Copying the file to windows/font directory will work for windows, but I think it wont be generic to all operating system. So is there anyway to install a font using code?
    I also want to know how to make the font available only until my application window is open, It must be available to all other external applications like photoshop, word etc., When I close my window it must un-install automatically or be made not available to other applications. Any suggestions? Please do help! Thanks in advance...

    I have already tried the above, But the font created using input stream is available only to my application* and is not viewable in photoshop.*. I realize this. Like I said, I know of no method that will register/deregister the font with the system. You'll have to create your own method that takes the operating system into account.
    String os = System.getPropery("os.name");
    if(os.equals("Windows Vista")) {
    }else if(os.equals("Windows XP")) {
    }else if(os.equals("Windows NT")) {
    }else if(os.equals("Solaris")) {
    AIX
    Digital Unix
    FreeBSD
    HP UX
    Irix
    Linux
    Mac OS
    Mac OS X
    MPE/iX
    Netware 4.11
    OS/2
    Solaris
    Windows 2000
    Windows 95
    Windows 98
    Windows NT
    Windows Vista
    Windows XPYou'll need the standard font directory for each system. I think all the window ones are C:\Windows\Font\ . Each OS probably has its own little quark (like having several font directories or throwing different security exceptions). Undoubtly it's going to require some research and a bit of trial and error. You can probably work some magic with Runtime.exec(...) as well.
    The alternative would be to google for some libraries that offer similar functionality, or promt the user for the system's font directory and save the location of the directory in a file somewhere for future use (so the user dosen't have to specify the font directory everytime he/she starts up the application).

  • How can i print from adobe digital editions?

    How can i print from adobe digital editions?

    Please see FAQ: Printing a PDF file in Windows 8.
    If you are running Windows 8 on a laptop with an Intel-based processor, you can install Adobe Reader XI (desktop app with classic UI) alternatively.
    Go to your Windows 8 desktop.
    Go to http://get.adobe.com/reader/ in your browser.
    Download and install Adobe Reader XI.
    Launch Adobe Reader XI and open a PDF file.
    Select File > Print from the menu.

  • How to install Beauty Box plug-in on Premiere Pro CC ?

    I have dowmloaded the beauty box.exe effect but I don't know how to install it in premiere pro CC, so it would show up in my effects panel. Can anyone help me. Thank you. I'm on Pc and new on the CC.

    Hi aq,
    Install Plugins on Windows :: Support :: Digital Anarchy
    make sure to point the installation to the premiere plugins folder, if not already specified by the installer.

Maybe you are looking for