How to install bar code printer.

Dear All,
A issue in my company that i have to install BAR code printer.But i dont have any idea how to install BAR code in sap..AS i m the BASIS guy this is the first time i m facing this issue...plz tell me how to resolve this...
Regard's

Hi,
yes, same way as you doing for other printer in SPAD
just select your device from device type in Device attribute
then select your appropriate host spool access method and host printer.
SE73 is use for font maintenance which are use in SAP script .
also check following forum to define printer
SAP prints from Suse Linux OS
regards,
kaushal
Edited by: Kaushal Malavia on Jun 20, 2008 6:24 PM

Similar Messages

How to create Bar code

Hi,
How to create Bar code?
Explain the steps.

Hi,
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
<b>To Create a Bar code Prefix</b>
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Regards,
Padmam.

BAR Code Print Using Font Free 3 of 9 Extendted

HI,
We have installed BAR Code Font TTF file for Code 3 0f 9 Extended using se73 in SAP as well same in windows.
Scaneer show 100% confidance (recognize well) while printing the text from MS Word( Testing Purpose). but while Printing from SAP Sscript scanner dont recognize the print bar code( We have installed the same font by SE73) in SAP.
Could any one help us what may be issue while printing from SAP SCript , SAP is not printing the actual BAR Code same as MS Word.
Rgds
Bansal

Hi,
Each Code 39 printer can also print 'Extended Code 39' barcodes. It is only the Bar Code scanner that must be switched to 'Extended Code39'.
In a Code 39 Barcode you can use the characters 0-9, A-Z and the characters -. $/+%
For an Extended Code 39 barcode a combinition of these characters get a special meaning. See the link below:
http://www.barcodeman.com/info/c39_ext.php
Regards,
Aidan

How to display BAR-CODE through ABAP report

Hi,
Could you please help me, how to display BAR-CODE through the ABAP report.
I am writing below code, but BAR-CODE is not displaying on report.
           PRINT-CONTROL FUNCTION 'SBP01'.
            WRITE: 20 BAR_CODE1 NO-GAP.
           PRINT-CONTROL FUNCTION 'SBS01'.
Regards,
SSRAJU.

Hi RAJU,
you can see this forum link and its sub-links, here it is clear about it.
Re: Barcode printing on report
Thanks & Regards,
Dileep .C

3D Bar code printing

Hi,
I was asked to print sample documents using 3D Bar code. Does anyone have any idea on this? Any hints would be really helpful.
Thank you,
Chandra

Hi
Do u want it in scripts or smartforms???
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
Only Se71 is used to create a barcode
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
Check this link
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
http://www.erpgenie.com/products/synappcode.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
New barcode printing for smartforms
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
http://www.zebra.com/cpgn/pdfs/SAP_universal.pdf
Reward all helpfull answers
Regards
Pavan

Bar code printing in WM

Hi,
Can any body know me how does bar code printing happens in WM ?
Please let me know how we aligns for e.g. SU number with bar code.Is it something ABAP person has to do while creating smart forms?
Let me know the whole set up.
Thanks
Prashant

Hi ,
You have to get your Technical COnsultant Assistance for Bar Code Print Configuration
[Printing Bar Codes |http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm]
[Bar Code Printing in SAP |http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm]

Bar-code printing in smartforms

Hi All,
how to done or step by step procedure of bar-code printing in smartforms.....guide me please.
Thanks,
Regards,
Vishal Bhagwat.

Have a look at below PDFs. It will give all the details abt scripts.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRRDI/BCSRVSCRRDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCREDIT/BCSRVSCREDIT.pdf
Also have a look at below links:
http://help.sap.com/saphelp_crm40/helpdata/en/16/c832857cc111d686e0000086568e5f/content.htm
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf.
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm

Bar Code Printing

Hi,
I want to write a bar code printing program, Can anyone guide me and give me a sample program and how it works documentation.
Regards
Jiku

Hi,
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
You create a bar code or change a bar code in the font maintenance transaction (transaction SE73). To do this, proceed as follows:
¡        Start transaction SE73, and choose System Bar Codes ® Change.
¡        If you create a bar code, the system asks whether you want to use the new bar code technology or traditional system bar codes. Choose New.
You can enter a name and a description for the bar code. Note that the name must begin with a Z to avoid conflict between your bar codes and the standard bar codes.
¡        You are asked which bar code symbology and which bar code alignment is to be used, both when creating and when changing bar codes. For information about what you should specify for the requested parameters, see the SAP Note 645158 in the SAP Service Marketplace. This SAP Note is always kept up-to-date.
       2.      If you have created a new bar code, you must now add this to a Smart Style as a character format.
3.      You can now select text in Smart Forms and choose the corresponding style with the bar code as the character format for this text.
Hope it helps.
Regards,
Sonika

How to implement bar code font in BIpublisher?

I have pasted bar code font file in c:\WINDOWS\font(true type) location,
then i pasted bar code font file in many folders viz.C:\Program Files\Java\jre6\lib\fonts and also in
C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts ....
i have made changes in XDOEXAMPLE.CFG to rename it to XDO.CFG after changing fontfamily and
truetype path as
<font family="IDAutomationHC39M" style="normal" weight="normal">
<truetype path="C:\jre6\lib\fonts\IDAutomationHC39M_Free.ttf" />
</font>
i have also installed bar code font which i can get in MICROSOFTword but when i preview the template then i get a javaioexception error saying it cannot find the path
plz help me asap

use xmlpublisher if your oracle version is supprting. Download the font from IDautomatiion,
else you can also directly incorporate in your report. Here are the steps:
1. Download and install the font on the machine that Reports Builder and Server will be running.
- Windows is a simple matter of copying the IDAutomationC128M.ttf to the C:\WINNT\fonts directory.
- Unix is very complex. Use the following note to assist in installing the font:
a. Set the DISPLAY environment variable to the expected final IP Address that
the Reports Server will be using. Every time the DISPLAY is set to a different
IP Address, the available fonts will be different.
b. To capture the results of the commands, use the "script" utility.
In any directory that you have write permissions, do the following:
#script fonts.trc
#echo $DISPLAY
#xset -q
#xlsfonts -u|grep iso8859-1
#exit
c. You also need access to the uifont.ali found in:
Developer 6i: $ORACLE_HOME/guicommon6/tk60/admin
Developer 9i: $ORACLE_HOME/guicommon9/tk90/admin
2. Create the report and reference the new barcode font.
3. Verify that the output displays the barcode.
4. Attached the IDAUTOMATION.pll that is downloadable with this note.
5. Edit the Property Inspector for the field.
6. Create a format trigger the encodes the value:
Example:
function F_barcode1FormatTrigger return boolean is
begin
srw.set_field_char(0,idautomation.code128b(:barcode1));
return (TRUE);
end;
7. Compile and close the trigger.
8. Now the barcode is encoded with start and end codes.

Can anyone tell me how to install a network printer driver without having the network printer online?

Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
the driver? This is the point of my question!
I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

How to install a network print on solaris 10

How to install a network print on solaris 10?
Thank You!

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How to find bar codes and mails to send clients in smartforms

HI friends,
How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
Thanks in Advance.
Saradhi.

Hi!
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Regards
Tamá

How to use Bar code field in Item master

Hi Experts
I want to know that How to integrate Bar code scanner data with SBO. Bar code contain many information like price, serial no., description etc . For example I want that when I read a barcode by barcode scanner it automatically update itemcode, description , price and serial no.
Thanks
regards
Gorge

Hello Gorge,
A barcode would ideally contain only an identification code and not other information. All such information like price, etc. should be fetched from a database, after reading the barcode, and identifying the item.
You can simply enter the barcode in the Item Master Data and than use the barcode field to identify the item in sales / purchase documents instead of itemcode or itemname.
Rahul

Bar Code Printing. Is PDF417 supported by SQR

Hi, Can anyone please clarify if SQR v6.1 will support 2D Bar code printing like PDF417 format.Thanks in advanceFarouq

Hi, Can anyone please clarify if SQR v6.1 will support 2D Bar code printing like PDF417 format.Thanks in advanceFarouq

Bar code printing in B1

I am new setting up bar code printing in B1.
We need to print stikers for product, kit and customer order ship identification.
Need instructions to follow.
Thanks.

Please check this thread:
Bar Code
Thanks,
Gordon

How to install bar code printer.

Similar Messages

Maybe you are looking for