How to install Bluetooth Stack for L850-1EZ?

Hi,
I have Satellite L850 - 1EZ with short model number: PSKDNE and I can't install the driver for bluetooth device. I downloaded it from the site, but in the process on installation it says "Please plug in the Bluetooth device and click OK button".
My bluetooth device was working properly before I sent my notebook to technical service because of motherboard failure which ended up replacement of the motherboard. And before that -unfortunately- someone tried to reinstall the operating system and all the drivers were gone.
After I recieved my notebook from the technical service all my drivers were back except Bluetooth driver. Now I'm trying to install it but keep getting error messages. My operating system was originally Windows 8 - 64bit . Now it is updated to Windows 8.1 .
Can anyone help with this issue ?
Thanks in advance.
Have a nice day.
Best regards

> {quote:title=Tonny wrote:}{quote}
> After Win 8.1 system upgrade, you will need to upgrade the Toshiba drivers too.
> As Im not mistaken, the Satellite L850-1EZ supports the Atheros WLan / BT combo module.
>
> To get the Bluetooth working, you need to install the Toshiba System Driver for Win 8.1 and additionally the Atheros BT filter driver package must be installed.
>
> Firstly install the Toshiba System Driver tool which is available on the Toshiba EU driver page.
> http://support1.toshiba-tro.de/tedd-files2/0/tsd-20131016171635.zip
>
> Then follow with the Atheros BT filter driver package installation.
> Its the same package for Win 8 and Win 8.1
> http://support1.toshiba-tro.de/tedd-files2/0/bfdp-20121128162925.zip
Thank you very much for the reply.
No error messages during the installation process but nothing happened after the installation. Still no sign of Bluetooth on the right down corner.

Similar Messages

HDP Agent Device emulator and Bluetooth Stack for Win

Hi All,
We have successfully installed the Bluetooth Stack for Windows (Toshiba v7.10.01)
We would like to know the initial steps on how to test samples given in the Toshiba SDK with the HDP Agent Device emulator?

We are using the HdpAgent tool provided by Toshiba to simulate the HDP.
Successfully installed latest Bluetooth Stack for Windows by Toshiba Version v7.10.01
After this we followed below steps to run the HDP Agent Device emulator test application
1. Set the [Data Type] as Scale
2. Clicked the [Power]-[ON] button
3. Set the [Connect Target] to the BD Address of the connection target.
4. Set the MDL Configuration in [Connect]
Tried both options - Reliable and Streaming
5. Clicked on the[Connect]-[Auto Connect/IEEE] button to start
connection with target device.
After executing step 5, we are getting below error
Start Auto Connect
!!! ERROR Get HDP PSM()
Please help us to proceed further to emulate the HDP device.
Message was edited by: rajusb

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Portege M200: How to rectify Bluetooth Stack upgrade failure

I was upgrading the Bluetooth stack of my portege M200 with the drivers posted on Toshiba's website. during the end my laptop hung up. Had no option but to resatart the same.
Eversince all bluetooth functionality is showing errors, whenever I am trying to reinstall or unisntall the incomplete installation, I get a message that 'look for Bluetooth Stack for Windows from Toshiba.msi' as there is no installtion record of the same.
Now-neither can I uninstall the half installation of the upgrade niether can I re-install the upgrade.
I am in a fix and need help???.
Is there a way to rectify this problem

Still dosent help, when I tried installing the old driver, I guess it looked at the current installation of the new driver and it needed to uninstall that first. I still got the same message 'The feature that you are trying to use is available on another network' and is looking for the file at the following address 'U:\nbtools\__XPT_Tools-CDs\PMR400288EU0 EN FR GR IT Firebolt10 SPM20 XPT CD1\Bluetooth Stack\UK\'.
I am sure that there must be a method to nullify this installation from the registry and install and over-write the new installation completely.
I have never worked on the registry before. I try to recover the system
Thanks for helping
Bye

How to install java stack ,only abap ,basis patch level 9 installed

how to install java stack ,already installed abap ,basis patch level 9,please any one guide me and please give me installation steps for java stack.

Hi,
From sapinst, install Java Add-on.
check installation guide.
Thanks
Sunny

Satellite L655-145 cannot install bluetooth stack

Cannot install bluetooth stack. Setup programm just freeze. All other drivers installed successfuly. Device manager show only Bluetooth ACPI device. This problem appeared after updating BIOS from original version 1.80 to older (1.80->1.90->2.10->2.20). Downgrade to 1.80 take no effect.
PS. Sorry for my bad english.

Hi
As far as I know the notebook is equipped with an WIFI and Bluetooth combo card!
This means that Wlan and BT functionality is controlled by one card.
If you downgraded the BIOS (dont know why) please set this to default firstly.
Save the changes and reboot the notebook.
Then download the BT stack from Toshiba BT portal.
Enable the BT (FN+F8) and then start the BT stack installation once again.

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

How can install java sdk for mac os x 10.6.8

How can install java sdk for mac os x 10.6.8?

Deanwdd wrote:
I mean to update Quicktime for Mac Os X 10.6.8...
If you're running 10.6.8, Apple menu > Software Update. What version of QT do you have?

Hi , how to install " xi content for mdm " in XI

hi
how to install " xi content for mdm " in XI .
does any body know the procedure
cheers
akhil

Hi Akhil,
TPZ files you talking about are related to SAP Systems-MDM integration, i think. They need to deploy on integration engine of XI and require special permissions. Basis Admin of XI server can help you in this regard.
Most of them contains IR(Design Part) objects and after deploying thenm you need to do configuration part.
Ask your Basis Admin of XI to deploy them on XI server.
BR,
Alok

How to install the B1iP for 2007.

Hi, all
Does anyone know how to install the B1iP for 2007.
I tried but this message was occured.
"new:
127.0.0.1"\SBO_SHR\B1is\apps\PaymentEngine Neither share folder "B1_SHR" nor "SBO_SHR" exist!"
Acctualy there is no such folder.
Should I create the folder by myself?

Hello Erika and Moutain,
Please kindly make sure B1iP is installed in the B1 Server machine. If it is B1 Server, suppose there should be a shared forlder created: B1_SHR or SBO_SHR after B1 Server Installation. B1_SHR or SBO_SHR folder is used to store the client instllation, online help files and working folder for the PaymentEngine in B1 2007 A PL. The error message occurrs during the PaymentEngine B1iApplication instllation. But since B1 2007 A PL 38(including PL38), this error message should be not there anymore. So if you are working with the version earlier than 2007 A PL38, please upgrade the latest version PL39. By the way, of course you can create the shared folder (B1_SHR) and share it by mannual, but it should be created by B1 Server installation. Thanks.
Kind Regards
-Yatsea

How to install flash player for the gaming app "raptr"?

how to install flash player for the gaming app "raptr"?

Hi,
If you wants to install flash for any browser just visit http://get.adobe.com/flashplayer/ from that browser and click on "Install Now" button to install flash player for that browser.
But since i have found that raptr is a standalone game so raptr support team would be the right contact who can guide you well that which Flash player plugin they are using in their game. And this is what i have found on there support page Raptr wants me to download "Flash for Other Browsers". Where do I get that? : Raptr Support
You can follow the steps on that link, I hope it will solve your problem.
-Varun

How to install only OATS for Functional Testing ?

How to install only OATS for Functional Testing for Oracle EBS?
I tried micro installation, but installation tried to install whole test manager/oracle xe db/Weblogic etc..
I want to evaluate how it works, can we leverage for Functional/regression tesitng...
Please advise...
Thanks
Edited by: 956069 on Aug 30, 2012 6:19 AM

Hello
You should be able to install OpenScript only using the micro install distribution. You can just skip the steps concerning XE & WLS installation/connection.
JB

How to install plugin globaly (for all users) in Firefox13?

How to install plugin globaly (for all users) in Firefox13?

See also:
*https://developer.mozilla.org/en/Gecko_Plugin_API_Reference/Plug-in_Development_Overview#Installing_Plug-ins

HT1338 HOW TO INSTALL THE LION FOR THE FIRST TIME'

how to install x lion for the first time

Call Apple and order a download code. You need OS X 10.6 and the Mac App Store to use the code. Lion will be $20.

How to install Best Practise for HCM

Hi all:
Could you please tell me how to install best practise for HCM , as there is no autoran file.
Thank you very much!!!
Best regards
Frank

Hi,
Did you chk this link;
http://help.sap.com/content/bestpractices/overview/index.htm
http://help.sap.com/bp_hcmv1600/HCM_US/HTML/index.htm
Regards
CSM Reddy

How to install Bluetooth Stack for L850-1EZ?

Similar Messages

Maybe you are looking for