How to install CAL 2008 SQL Server

how to install CAL 2008 SQL Server

Hello,
SQL Server does not keep track of licenses. You cannot register/install licenses on a SQL Server instance. SQL Server uses
an honor system, that means keep licensing papers of a safe place if somebody requires them later.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

How to install sp2 for sql server 2012 , where sql server 2012 instnce is installed in cluster mode

Hi Everyone,
I want to install sp2 for sql server 2012, My sql server 2012 instance is installed in cluster mode.
Please suggest the best practice to install sp2 , what are prerequisite and recommendation.
Please share installation guide for sp2 in cluster instance, if any one have.
Thanks All
Aditya

Did you searched a bit before posting question.
Please read
https://support.microsoft.com/kb/958734?wa=wsignin1.0
http://blogs.msdn.com/b/john_daskalakis/archive/2014/09/05/how-to-install-a-service-pack-at-a-sql-server-2012-failover-instance-best-practices.aspx
http://blogs.msdn.com/b/jason_howell/archive/2012/08/28/how-to-patch-sql-server-2012-setup-with-an-updated-setup-package-using-updatesource-to-get-a-smart-setup.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How to install BIDS for SQL Server 2008 R2 and Visual Studio 2008(SSRS,SSIS)

Hi,
I want to install SQL Server 2008 R2 and Visual Studio to use SSRS tool, where to download these application. And my System Configuration is Window 8.1,64 Bit.
Please share step by step information to download and installation. Kindly Reply soon.
Thank you
Pravesh Kumar

Hi Pravesh Kumar,
As Visakh16 suggestted that you can download sql 2008 r2 standard and developer editon.
If you have a subscription associated with your Microsoft account, you can download sql 2008 r2 standard and developer editon from below link, but these two editions are not for free:
https://msdn.microsoft.com/subscriptions/securedownloads/
Microsoft also provide the evaluation edition for free use of 180 days. This software is for evaluation and testing purposes. The evaluation is available in ISO format. Web, Standard, Enterprise and Datacenter editions are available via the same download:
http://www.microsoft.com/en-us/download/details.aspx?id=11093
More details information about the feature supported by different editions in the article below:
Features Supported by the Editions of SQL Server 2008 R2
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to install and use sql server express 2014 with tools

I am a student and have an assignment that requires I use either mysql or sql server, so I chose to download and install sql server express 2014 with tools, but after installation was complete all I can see is sql server 2014 import and export data (64-bit)
and I have no clue what to do wiith it...I had used sql server 2008 a couple of years ago and it was easy, but this is very complicated, I have been trying to get this done for 2 days now, so someone please help me and tell me what I am doing wrong.

Hi,
It seems you did not installed complete software. Make sure you have downloaded below from
SQL Server Express Download link
Express with Advanced Services (SQLEXPRADV) when you click on Get started button on page displayed by clicking on above link. This download includes Sql Server Management Studio as well.
Before moving I would Like you to first read
Hardware and Software requirements
Please refer
how to install SQL server 2014 express
Above Link is for Enterprise edition but you can use it for express as well. When you reach page feature selection please select all features to install.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to install SSIS on SQL Server Developer

I have SQL Server Developer. I know I can add in SSIS. Can you tell me the steps to install SSIS on my machine?
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hi ryguy72,
Based on my research, in the version of SQL Server 2014, SSDT BI is no longer included in setup. If we require Integration Services design-time features, we must also install SQL Server Data Tools (SSDT). Installs Microsoft SQL Server Data Tools Business
Intelligence project templates for Analysis Services, Integration Services, and Reporting Services that support Visual Studio 2012.
Please download and install Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2012 from there:
http://www.microsoft.com/en-in/download/details.aspx?id=36843
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How does one install a express sql server to run with Visual Web Developer 2008?

I successfully installed .NET framework v 3.5 and VWD 2008 on a new Vista laptop. When I want to add a Sql Server database to a website, errors tell me to install SS 2005 Express. MSDN SS 2005 Express download tells me I MUST first install .NET framework v 2.0 before SS 2005. When I try to install framework v 2.0, I'm sent to v. 3.5 and no way to download SS 2005.
How does one install a express sql server to run with Visual Web Developer 2008?

Momark,
Do you still need help with this?
Thank you!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How to configure USER CAL on SQL server 2008

how to configure or Add User CAL on SQL server 2008?
pls let me know the process

Hello,
There is no CAL management in SQL Server, you have the licenses only "on paper".
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to secure connection in sql server 2008? my main problem is which certificate should i add in mmc

i'm recently working on hardening of sql server 2008. now i face with a problem. my problem is how to secure connection in sql server 2008? my main problem is which certificate should i add in mmc? what are these certificates about?and guide
me in choosing the appropriate certificate.
and how should i know that the connection in sql server is secured?
plz guide me from the beginning cause i'm rookie in this subject.
thanks in advance.

Hi sqlfan,
Question 1: my problem is how to secure connection in sql server 2008?
Microsoft SQL Server can use Secure Sockets Layer (SSL) to encrypt data that is transmitted across a network between an instance of SQL Server and a client application. For more information about Encrypting Connections to SQL Server, please refer to the following
article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
Question 2: my main problem is which certificate should i add in mmc? what are these certificates about?and guide me in choosing the appropriate certificate.
To install a certificate in the Windows certificate store of the server computer, you will need to purchase/provision a certificate from a certificate authority first. So please go to a certificate authority to choose the appropriate certificate.
For SQL Server to load a SSL certificate, the certificate must meet the following conditions:
The certificate must be in either the local computer certificate store or the current user certificate store.
The current system time must be after the Valid from property of the certificate and before the Valid to property of the certificate.
The certificate must be meant for server authentication. This requires the Enhanced Key Usage property of the certificate to specify Server Authentication (1.3.6.1.5.5.7.3.1).
The certificate must be created by using the KeySpec option of AT_KEYEXCHANGE. Usually, the certificate's key usage property (KEY_USAGE) will also include key encipherment (CERT_KEY_ENCIPHERMENT_KEY_USAGE).
The Subject property of the certificate must indicate that the common name (CN) is the same as the host name or fully qualified domain name (FQDN) of the server computer. If SQL Server is running on a failover cluster, the common name must match the host
name or FQDN of the virtual server and the certificates must be provisioned on all nodes in the failover cluster.
Question 3: how should i know that the connection in sql server is secured?
If the certificate is configured to be used, and the value of the ForceEncryption option is set to Yes, all data transmitted across a network between SQL Server and the client application will be encrypted using the certificate. For more detail about this,
please refer to Configuring SSL for SQL Server in the following article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
If you have any question, please feel free to let me know.
Regards,
Donghui Li

How to repair database using SQL server 2008 and C#

How to repair database in SQL server 2008 using C#
Musakkhir Sayyed.

Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your
question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

MOF syntax error occurred while installing 2008 SQL server Express on Vista Ultimate

I have tried cleaning, then installing 2008 SQL server Express on Vista Ultimate 3 times and spent hours on this. I have installed regular SQL server on 2003 server with no issues many times, but I have huge issues with 2008 SQL server Express. I keep getting the proceeding errors.
Any ideas?
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\SystemConfigurationCheck_Report.htm

Similar error (not SQL Express but Enterprise) on my network reveals the following issue (still prevalent after removing and re-adding the machine to the network):
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/machinename.domainname.local. The target name used was cifs/MACHINENAME. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.LOCAL), and the client realm. Please contact your system administrator.
ALSO: The session setup from the computer MACHINENAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MACHINENAME$. The following error occurred: Access is denied.
This default instance (Ent SQL 2008 on Ent Server 64 bit 2003 R2 SP2) failed with the MOF error using a service account to install SQL 2008. Repair does not work.   "The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature."
I expected to have more luck with the information here: http://mark.michaelis.net/Blog/CategoryView.aspx?category=.Net but wound up with result seen in my next post.
Of note, tried the removal of leftover registry entries after a failed install as in link above, also removed sql folders prior to re-install. Error is the same and rather than list entire log here, there is a portion available below but as is evident, there is a permission error in the registry which verifies what mark michaelis has pointed out:
"Sco: Compile operation for mof file \etcls.mof.transformed failed. Exit code 3" "Configuration action failed for feature SQL_Engine_Core_Inst during timing ConfigNonRC and scenario ConfigNonRC." "A MOF syntax error occurred." "Configuration action failed for feature SQL_Engine_Core_Inst during timing ConfigNonRC and scenario ConfigNonRC." Here is more: at Microsoft.SqlServer.Configuration.Sco.WmiProvider.InstallMof() 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.EtwSetup.Install(String strInstanceName, Guid guidInstance, String strPath) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.SetupETW(EffectiveProperties properties) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install_ConfigNonRC_Prepare(EffectiveProperties properties) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcb) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SqlFeatureConfigBase.Execute(ConfigActionScenario scenario, ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbCurrent) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream) 2009-03-31 10:51:19 Slp: Exception: Microsoft.SqlServer.Configuration.Sco.ScoException. 2009-03-31 10:51:19 Slp: Source: Microsoft.SqlServer.Configuration.Sco. 2009-03-31 10:51:19 Slp: Message: A MOF syntax error occurred.. 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key
(And so on - cannot read or write the registry key)...

How do i connect to sql server 2012 from cmd .

Hi ,
I Installed sql server 2008 R2 and 2012 Express and sql server2014 . I can conect to sql server 2008 R2 using
SQLCMD -L command .
How do i connect to sql server 2012 express edition from cmd .
Any Hep appreciated
Thanks in advance,
Shravan

I HAVE ANOTHER INSTANCE NAMED TEST WHEN I USE THE COMMAND IT GIVES ME THIS ERROR
HOW TO RECTIFY
C:\Users\HP>SQLCMD -S HP-HP/TEST
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Named Pipes Provider: C
ould not open a connection to SQL Server [67]. .
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or in
stance-specific error has occurred while establishing a connection to SQL Server
. Server is not found or not accessible. Check if instance name is correct and i
f SQL Server is configured to allow remote connections. For more information see
SQL Server Books Online..
PLZ HELP

How to select data from Sql server 2005 database tableinto oracle database table

Hi,
I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
Thanks a lot in advance.
rk
OS: Windows 7 professional

Hi,
you can use export/import wizard and specify sql server as a source and oracle as destination.
I hope this is helpful.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

How to install drivers in xi server.

hi,
how to install drivers in xi server while using different jdbc adapters.
i mean to connect with jdbc adapters we need to install drivers in xi server.
how to do that .
if u reply with steps then its good for me.
thanks in advance.
jpk

Hi jpk
If you want use jdbc adapter .. you need to deploy the jdbc drivers first..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bf4b1055-0d01-0010-32a3-b3848d77a6b9
please click this link.. and you will get one pdf file..
if your r using MS sql 2000.. for example you ned to downlaod the msutil.jar.etc..tow more jjar file are there..down laod this and follow the pdf file.. how to deploy. teps..
Don't forget to give points...
Kumar

How to register VSPackage into SQL Server Management Studio?

Hi All,
I am a newer to VSPackage, I want to create a VSPackage for SQL Server Management Studio(SSMS), now I can create a VSPackage project and debug it in Visual Studio but don't know how to debug it in SQL Server Management Studio and how to deploy VSPackage to
SSMS by MSI? Thanks

By the way I find a extension.vsixmanifest file and some .pkgdef files under
C:\Program Files\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Extensions\ folder, and they are very similar with VSPackage files. Do know this is useful or not.
Hi Vic Zhang,
After some research, There are some notes. SQL Server Management Studio is built upon the Visual Studio Isolated Shell, which inherently supports extensibility (add-ins/plug-ins). It is possible to tap into the Visual Studio extensibility services to surface
custom capabilities within SQL Server Management Studio; however, we do not discourage this, keep in mind that such extensibility is not supported, so there may be issues with backward/forward compatibility. Microsoft does not publish documentation for extending
SQL Server Management Studio.
If you want to debug VSPackeage about SSMS, I recommend you debug in Visual Studio and not in SSMS, open the project and attach to the process of SSMS.exe, then debug it.
About the issue of finding the “RootKey”, a .pkgdef file is way to encapsulate application configuration information in an easily editable, distributable, and deployable form. And it registers the Extension Manager (which is written as a VS Package). If
you install SQL Server 2012, the .pkgdef of SSMS is located in the following path, you can check the “RootKey” in this .pkgdef file.
C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio
There is detail about a PkgDef, you can review the following article.
http://blogs.msdn.com/b/visualstudio/archive/2009/12/18/what-s-a-pkgdef-and-why.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How to install CAL 2008 SQL Server

Similar Messages

Maybe you are looking for