How to install Canon LIDE60 scanner plugin & scan direct in PhotoShop CS4?
I just installed CS4 PhotoShop on my MBPro and can't remember how to install Canon driver for my Canon LIDE60 scanner so that I can scan directly from the PhotoSHop IMPORT menu? Can anyone please help? Thanks
I found out that I had installed the Canon drivers OK, I just had to download the Adobe Photoshop CS4 Optional plug-ins and ReadMe http://www.adobe.com/support/downloads/detail.jsp?ftpID=4047 and after a restart it all works fine in CS4, OS X 10.5.6
Similar Messages
-
How to install Canon XF Utilities Disc Ver.3.1
How to install Canon XF Utilities Disc Ver.3.1 on my OS X 10.9.2. Camcorder XF300 editing in Final Cut Pro 10.1.1?
thanks for the reply. I followed ur steps to check the printer queue. I could only copy the URI link (which is:
usb://Canon/LBP3100/LBP3108/LBP3150?serial=0000A29AIAWT), however, i couldn't paste to the same place (if im not getting wrong?).
Please see the screenshot as below. Is everything correct there? I still couldn't print anything. -
How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?
I've tried updating with the USB cord, updating wirelessly, downloading the drivers manually, installing them manually and every concieveable combination of the above. This is getting extremely frustrating and i'm ready to toss this macbook into a wall.
TLDR;
This is my first experience with a macbook and so far i'm finding the whole experience extremely difficult and disapointing. I felt that because of the hype, that macs were top of the line but i'm seriously considering ditching the mac and heading back to pc if this issue can't be resolved. -
How to install Flashplayer 16 ActiveX-Plugin on Windows Server 2008R2 Terminalserver via SCCM
Hi there,
How to install the Plugin on Terminal Servers in generell. I tried it with the msi, which doesn't work for All Use.
System:
Windows Server 2008 R2 with Internet Explorer 11 - Terminal Services enabled.
Is there any advise, how to do it on Terminal Servers for All Users?
Thanks in advance
Regards OliverHi there,
How to install the Plugin on Terminal Servers in generell. I tried it with the msi, which doesn't work for All Use.
System:
Windows Server 2008 R2 with Internet Explorer 11 - Terminal Services enabled.
Is there any advise, how to do it on Terminal Servers for All Users?
Thanks in advance
Regards Oliver -
How to install a third part plugin?
Hi, I am trying to install a third part plugin (fileopen) but it is not possible because I am in certified mode on: how can I turn it off?
Hi disable certified mode,
Please contact the manufacturer of that particular plug-in for detailed instructions on how to install it.
Best,
Sara -
How to install Adobe Flash Player plugin for 64bit Arch
I was trying to install the new 64-bit flash plugin for my newly install 64-bit Arch.
I want to install the 64-bit plugin, and also found this Wiki page https://wiki.archlinux.org/index.php/Br … ins#64-bit
I'm not used to AUR, and have no idea how to use it for now. I just want to get the 64-bit version plugin working asap without any complaexity.
So is there any fast way to get it to work? (i'm open to adding a repository to my /etc/pacman.conf)
Something like
pacman -S flashplugin-prerelease
would be good enough for me for now.
So, how do I get it work quickly? (I'm also open to suggestions like extracting the libflashplayer.so library from http://download.macromedia.com/pub/labs … 710.tar.gz to some system directory.)Hi,
I think I understand your concern at most. I also had the same problem. What you can (should !!!) do is:
1. Download this "Square" Preview Release from http://download.macromedia.com/pub/labs … 710.tar.gz
2. Unpack it
3. Execute the command "mkdir ~/.mozilla/plugins/"
4. Copy the unpacked libflashplayer.so into the above folder you created by doing "mv libflashplayer.so ~/.mozilla/plugins/"
5. Restart your firefox
6. Optional (check whether it is installed by typing about:plugins in your browser URL field.) you should be able to see this under shockwave flash.
I have seen many people saying that this version does not work very well. For me it is working flawlessly and effortlessly. Once they publish the official version, I will switch to the newest. Otherwise, I really do not have any problem with it. Good for you! :-) -
How can I scan directly into Ps CS4 on a Mac when Rosetta wont work?
I'm using a Mac Pro Quadcore with Snow Leopard version 10.6.8 and want to scan photos straight into Ps CS4 version 11.0.2 using a Canon Canoscan LIDE 100.
BUT when I go to Import there is no TWAIN option, there is only: Variable Data Sets (grayed out), Video Frames to Layers, Anti-Alised PICT, PICT Resources and Notes (grayed out).
I right click on Adobe Photoshop CS4 inside the Ps CS4 folder to bring up "Get Info" and click the check box that states "Open using Rosetta" BUT when I click open the Ps icon to open it Ps crashes straight away. I click "Reopen" and it crashes straight away. Un tick the Rosetta check box and Ps opens fine.
I assumed this was Apples problem because Rosettas is their program but after walking it through the Apple care operator and following his instructions to download a PowerPC version of VLC (which started up fine without doing a thing)to see if Rosetta was automatically installed, it worked fine, I was told that it's an Adobe problem. Urrrggghhh
Then I downloaded the TWAIN plugin and dropped it into the import-export folder and NOTHING!
The scanner works with Snow Leopards native Image Capture so it's not the scanner. Except that the scanner buttons dont seem to work when they used to on a MacBook. But here on the Mac Pro I cant find anything within the Ps menus that resembles "permission" to scan.
I need to do a lot of photo correction/remove blurred/restoration and read that it's better to scan the old photos straight into Ps to ensure no quality is lost during the scan. Regardless if this 100% true I still should be able to scan straight into Ps. I mean the CS4 package + Mac cost enough.
What is it that I'm doing wrong or missing here? Any help would be sooo appreciated!Hi Mate - I'm using CS4 Extended Ps v11.0.2, according to the Adobe site photoshop instals a 32 bit version only. How can I find out exactly by checking out preferences etc? I'll have to go hunt out the box.
Thanks for the reply. -
Scanning directly into Photoshop Elements 8 from Officejet 5740
I just installed an Officejet 5740 All-In-One. I did the standard install and am able to print fine. I would like to be able to scan directly into Adobe Photoshop Elements 8 running on Mac OSX 10.10. When I go to the File>Import menu, the new device doesn't show up. Is there something else that I need to install or configure for this to work?
Hey , Welcome to the HP Support Forums!
I understand that you are experiencing issues when scanning from your HP Officejet 5740 e-All-in-One Printer to Adobe Photoshop Elements 8 on your Mac OS X 10.10 computer. I would like to assist you today with resolving this scanning issue. Now, your product is fully supported when scanning through the HP Scan software and the Mac Scan software on your computer. Therefore, to start troubleshooting I would like you to confirm that the supported software functions with your machine. Can I please have you follow the steps below. To start troubleshooting please click here. Once the support document opens please click the drop down for 'Scanning a Photo or Document'. Next, follow the steps listed to complete the scan under the supported HP Scan or HP Utility Software. If the scanner fails to perform under the HP software then a driver issue may be occuring. Should this be the case please follow the steps below to confirm that the correct HP Officejet driver is being utilised by your printer and not the Apple Airprint driver.
1. Click the Apple menu, and then click System Preferences. 2. Click Print & Scan, and then check if the name of your printer displays in the Printers list. 3. Click the name of your printer, click the minus sign (), and then delete the printer. 4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer, 5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Officejet driver is selected and not the Airprint. 6. Click Add to add the printer to the list. Once the printer has been confirmed as installed with the HP driver, please test scanning through the HP Scan software again. Once you're able to scan successfully through the HP Scan software please test scanning through the Adobe Photoshop software again. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck! -
Plugin Load problem with photoshop CS4
Hi all,
i want to migrate my filter plugin from 32bit to 64bit environment in
adobe photoshop CS4.
Firstly i have tried to build one sample filter plugin(Dissolve). i have
build it sucessfully and placed the plugin inside the Filter subfolder of
plugin folder.
when i run the photoshop CS4(64 bit)the sample plugin is not been showing
in the filter plugin list.
I have looked into the system info regarding the loaded plugins., but i
haven not find the dissolve plugin name over there.
i have not even get any error message regarding the plugin load.
What will be the reason for this, Can anybody help me out in this..
Any type of help is highly appreciated.. If anybody has any confusion in
understanding my problem .. please revert me back..
Regards
HemantCheck your PiPL for something like this:
#if MSWindows
#if defined(_WIN64)
CodeWin64X86 { "U3D_ENTRY" },
#else
CodeWin32X86 { "U3D_ENTRY" },
#endif
#endif -
How to install canon mp 160 scanner on the mac
I recently installed my cannon printer on my mac, but for some reson the scanner functionality is not working, do i need to install a different driver for the scanner, if so where do i get that. I can print docs with it but no luc with the scanning feature.
Appreciate any comments/suggestionsIt appears that ML is not supported, you might try contacting Canon and see if they might have a work around.
From the Canon site.
Drivers & Software
Select an Operating System and OS Version from the drop down menu below then click on a category to view the latest supported files for your product. Click on the file description to navigate to download, then click on "I Agree - Begin Download" to start downloading.
Select Operating System Windows Mac OS Linux Select OS Version Select OS Version Windows Server 2012 (x64) Windows 8 Windows 8 (x64) Windows 7 Windows 7 (x64) Windows Vista Windows Vista (x64) Windows XP Windows XP (x64) Windows Server 2008 Windows Server 2008 (x64) Windows Server 2008 R2 (x64) Windows Server 2003 Windows Server 2003 (x64) Windows Server 2003 R2 Windows Server 2003 R2 (x64) Windows 2000 Windows NT Windows Me Windows 98 Windows 95 Select OS Version OS X v10.8 Mountain Lion OS X v10.7 Lion OS X v10.6 Snow Leopard OS X v10.5 Leopard OS X v10.4 Tiger OS X v10.3 Panther OS X v10.2 Jaguar OS X v10.1 Puma OS X Server OS X OS 9 OS 8 Select OS Version Linux How to find your OS?
Show All
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp160#
Drivers
There are no drivers for the OS Version you selected. -
I have a CanoScan 9000F scanner - I'm trying to scan through Photoshop CS5 Extended but I just can't figure it out...
I downloaded the TWAIN plug-in:
http://kb2.adobe.com/cps/405/kb405072.htmlCanoscan comes with a bunch of software including ScanGear - in manual it says you should use this instead of Twain (don't know why that) or VIA. If you installed everything correctly you should see the it in File->Import->CanoScan 9000F.
On the other hand I have few questions, maybe someone can help:
- how to I scan 48bit images into PSE ?
- is it possiblle to automate dirt / scratch removal for b/w negatives (FARE) ?
- maybe you know of a plug-in that can do it - I have thousands of black and white films to scan, and doing it by hand is not really an option (for colour materials FARE works great)
Other than that i find the scanner quite good, especially the ability to scan more than one frame at a time - I can set it up in a moment (LED light is great, no warm-up time for a scanner finally), and then let it to the work, while i do my work - as scanning - mebye due to the fact that my computer is not the fastest out there) is still slow - 4 slides take > 30 minutes. But the results are very nice - if you want to check the quality, here is the link to my photographs scanned in PSE and Canoscan (origanally at 3200 dpi, resized for the web).
Tomasz Czarnecki :: teleskopy.net -
How to install canon pixma mx515 printer/scanner with linux mint
Can someone help me with the installation for my canon pixma mx515 .
I`am using Linux Mint 17.1
Best regards
JosClick the Plus Sign ( + ) in the Print & Scan in Sys Preference.
-
How to get Canon MF 4412 to scan
Hi I've just purchased a Canon Image class multifunctional printer MF 4412. I have it printing OK but scaning is not working. When USB plugged in it doesn't recognise my Macbook pro. Do I need to install seperate scanner drivers? Or do I need to get scaning software?
Thanks for the helpCanon has the MF ScanGear v1.30 for Mac OS X. With this software installed you can then set the MF Scan button online (showing USB Scanner or something similar) and then use either the MF Toolbox application (included with the driver) to scan or use Preview to scan your document.
-
How to install Canon MG3170 printer to Macbook Air (mid 2012), both USB & wifi
I have been trying to install the Canon MG3170 to my Macbook Air (mid 2012 version) using OS X Version 10.8.4. I followed the paper manual that came with the box & used the CD provided. In the midst of the installation, "AN ERROR OCCURRED WHILE TRYING TO ADD THE SELECTED PRINTER: UNABLE TO FIND THE APPROPRIATE SOFTWARE ON YOUR SYSTEM AFTER RUNNING SOFTWARE UPDATE."
Problems:
1) Cannot connect on Network because there is no WPS button on my Airport Extreme and Airport Express.
2) Cannot print, both via USB or wifi network.
When I bought the printer, I specifically selected this because it has Airprint and wireless printing and was one of the few printers in the Apple Online store. However, I have been having a lot of issues getting the printer installed to be used on my Macbook Air.
Please help!!Thank you John Galt!
After running SOFTWARE UPDATE, I restarted the Macbook. (DO NOT CONNECT THE PRINTER TO THE MACBOOK YET!)
Then I connected the Canon Printer MG3170 to my MacBook Air via the USB cable.
Next, I switched on the printer.
I am able to print and scan (via USB cable) from;
SYSTEM PREFERENCES - PRINT & SCAN - select CANON MG3100 series.
To install applications for printing & scanning, go to http://support-asia.canon-asia.com/contents/ASIA/EN/8201148300.html
However, this solved part of the question above, i.e., printing via USB cable (which is not the whole purpose of using the Airprint Printer) but at least it is a start.
*NOTE: UNINSTALL any prior Canon softwares and drivers specifically installed for this printer first before attempting the steps above as it may interfere with the installation process. -
Pl explain in detail how to install canon lbp2900b in my mac along with links and patchers
i am new to mac so please help me out with detail description reg canon lbp2900b printer
Search using
"canon lbp 2900 install mac" and see http://www.usa.canon.com/cusa/support/consumer
Maybe you are looking for
-
User Exit/ BADI for ME01- Sourcelist creation
Hiii We need a place exit/ BADi to do vendor validation before saving soource list in transaction ME01. Please provide suitable exit / badi for above requirement. Thanks ...in advance.!! Regards, Nilesh
-
Exception in XML Parser (format problem?)
Hi Experts, I am working on IDOC -> AS2 Configuration and the AS2 Configuration has the below structure <RecordSet> <Row1> <row1 - field1> <row1 - field2> <row1 - field3> </Row1>
-
5530: Trouble with connecting to laptop via blueto...
I have Nokia 5530 and laptop Toshiba A300. I can pair laptop with Nokia E50 and 3230 and Sony Ericsson. There is Vista installed on Toshiba though it doesn`t want to pair with Nokia 5530. Nokia 5530 can pair with PC with Windows XP installed and o
-
I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken. Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I descri
-
Hi, I had Lightroom 3.2 set up on my laptop (XP SP2). I went of on holiday and used it to set up a new catalougue for the photos I was taking while on holiday. That worked fine until Wednesday when something happened and Lightroom kept locking up on