How to install CCMS agent in MSCS cluster system?

Hi,
We just migrated our WAS 7.0 system from a single to a MSCS cluster system and we need re-install CCMS agent on it. New cluster system have two nodes. Each node we have local SAP instances. We have central instance for message server running on a shared drive, which can failover to one of the nodes. My question is when I install CCMS agent, where I should I install it? Each node of the cluster on local drive or only shared drive or I have to install on three places?
Thanks you.
Yujun Ran

Hallo.
Did you solve your issue?
I followed Oss note 536954, but I am not sure that it is for new cluster system.
Furthermore, the CCMS agent that you installed, point to a CEN system (as Solution manager for example) and as second system to the central instance ?
Thanks.
Mario

Similar Messages

How to install CCMS Agent for AS400 ?

Hi All,
Please advise any document how to install CCM4X and CCMSPING in the AS400 server (ECC6). Because i cannot find the CCMSAGENT file in the service market places.
is CCMS Agent supported for AS400 ECC satellite systems ? my solution manager installed in windows server.
thank you and Best Regards
Fernand

Read SAP Note 522878 - iSeries: Availability of CCMS Agents
Regards
Juan

How to Install CCMS AGENT in SOLMAN4X

HI,
I want to know what is the location of service market place where i can download my own certificate for my browser because everytime I access service market place i have to enter my user n pass manually.
I will post points for sure!
Thanks,

Afi
try
service.sap.com/sso-smp
Thanks
Prince Jose

How to install SMD Agent on a MSCS?

Hello helpers,
we have installed a PI 7.1 (double stack) on a MSCS environment. The next step is to connect the PI 7.1 SAP system to our SolMan and to install the diagnostics agent. Unfortunately I wasn't able to find any documentation explaining an installation of the SMD Agent in a MSCS environment.
Does anybody know what has to be done? Do I have to install 3 agents, one on every MSCS node and one in the SCS/ASCS cluster resource group, or is only one agent needed in the SCS/ASCS cluster resource group?
Looking forward for any answers,
Sascha Piotrowsky

Hi Sascha,
To distribute a solution to the diagnostics the install path must be verified in TC SMDIAG_WIZARD. To verify the install paths an installed SMD-AGENT is neccessary.
Yes
Another point is that we like to monitor the J2EE Servers and Dispatchers from the 2 instances on "nodeA" and "nodeB". So in my opinion at least 2 SMD-Agent should be installed, one on every node. Do you agree?
No, you need one SMD Agent, this agent can then monitor multiple instances on one virtual host. The connection is only between virtual host and agent, not between instance and agent.
But what shall I do with the ASCS00/SCS01 instance. Does an SMD-Agent installation bring any effort on "clusterSID" or is it a must?
It's not a must, only relevant if you want to receive host metrics from this host. As this is only virtual, I would not install one here.
Best regards
Michael

How to install & confgiure Oracle9i on Veritas Cluster Server

Hi,
I want to know how to install oracle9i on Veritas Cluster Server having OS as Solaris 9. Also How to configure oracle in VCS so that it can be failover.
I really appreciate the replies.
Thanks,
Shrikant

I want to install following component
Oracle 9i form server & report server
Oracle HTTP Server in SSL mode
Oracle As Web Cache
Regards
Arvind

How to install diagnostic agent for nw 7.0sp17, with solman ehp1- sp25

Hi Gurus,
we are using NW 7.0 Enterprise portal at SP17, want to configure E2E. So installed solution manager 7.0 EHP1 SPS 25.
Ran the Guided procedure solman_setup successfully. with intitial config, basic config and pending at managed system config.
Here my question is:
do i need to install smd agent on solman? or solman itself comes with agent. i cannot see any agent in mmc on solution manager.
What is SOLMANDIAG and SOLMAN AGENT, SMD Agent and Host agent.
The guide (https://websmp207.sap-ag.de/~sapidb/011000358700000952852009E) says before install SMD agent, install host agent, diagnostics agents are available 7.11 on wards, while installing smd agent sapinst asking SAP Unicode Kernel 711 , but currently my NW Portal system is using kernel 7.0..
Any guide, how to proceed for E2E on nw7.0 SP17 with solman ehp1 sp25( highest availale spack)
Thanks in advance.
Regards
Balaji

Hi Balaji,
As per the SMD agent 7.11 installation guide (https://service.sap.com/~sapidb/011000358700000952852009E) , Page 6 and 8, you would need to download the standard NW 7.11 DVDSs( usually kernel and Installation master) and SMD agent installation packages from the SMP. Location is mentioned in the guide as well.
For your query that Portal is based in i386, these are two different things. The SMD Agent will be installed with its own kernel and also 7.11 kernel is not support edon 32bit. However the SMD agent will use its own 7.11 64bit kernel and Portal will use its i386 kernel. Hopefully your hardware is able to support both. I recommend to proceed with x86_64 7.11 kernel for your SMD installation. Incase the hardwar does not support this, go for alower release of SMD Agent wherein the kernel supports 32 bit hardware.
Best Regards,
Srikishan

How to install Cisco Agent Desktop 7.6(1) on Win7 X64?

I am trying to install Cisco Agent Desktop 7.6(1) on my Windows 7 64-bit laptop. This
error keeps poping up:
http://i.imgur.com/xtBFm.png
This directory in the error message does not exist on my computer. Other x86.Microsoft.VC80.CRT... folders exist, but they have different names than the one in the error message window.
What can I do to install CAD ?

I ran into a different problem back when WIN7 was released, the error was along the line CAD detected unsporting OS. No matter how I finagled the OS nothing would work. I did read a little blurb to modify the MSI install file and it works quite well. I have since installed my modded MSI Agent Desktop and Supervisor Desktop on WIN7 64bit also no problem at all. Locate yourself a copy of SuperOrca and open Agent Destop.msi and scroll down to LaunchCondition Delete the top two lines
Condition and Description
#1 (CADOR) OR ((VersionNT=500 AND MsiNTProductType=1) OR (VersionNT=501) OR (VersionNT=600) OR (VersionNT=500 AND MsiNTProductType>=2 AND NOT SERVER_INSTALLED) OR (VersionNT=502 AND NOT SERVER_INSTALLED))
#2 (CADOR) OR (NOT (SERVER_INSTALLED OR SUPERVISOR_INSTALLED))
Save the Agent Desktop.msi to something like Agent Desktop WIN7.msi save it someplace handy and run it.
You may find you need to run as admin IF your using WIN7 PRO/HOME etc etc Ultimate shouldn’t give you these probs if the application installs yet wont launch go to control panel look into running compatibility etc etc
If you have odd securities errors while running the program Blame the OS go to the Cisco install folder and give the domain user full control security ect on THEIR folder, this will clear up any client side issues.
Most who run into this problem delete the two lines indicated above then smooth sailing.

How to install intelligent agent

Can someone please tell me how to install the intelligent agent on the NT server 4.0 platform? I can't install the intelligent agent extension pack due to my intelligent agent hasn't been installed yet.
Please help!
null

Explain what kind of installation you did. Accoding to what I know in 10g there is not an intelligent agent service to administer it explicitly.
Joel Pérez

How to install puppet agent on solaris 10 sparc

I would like to know how to install and configure puppet on solaris 10 sprc

Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS. That permits you to make very specific settings and not just generic global settings that could conflict with other software.
Can you tell us what research you have done on the topic?
For example, have you glanced through a Google search on "solaris web proxy" ?
If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space. What application software will you be using?

Installing CCMS agent fails: calling SALS_MS_GET_LOCAL_MS_INFO via RFC

Hi All,
I'm trying to connect our SolMan development to the CEN. However when registering ccmsr within J2ee admin it gives the following errors.
Does anybody have an idea?
Output for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-v,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01)
CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
compiled at Oct 28 2006         systemid 324 (IBM RS/6000 with AIX)
relno 7000
patch text patch collection 2006/4, OSS note 914721
patchno 83         intno 20050900
running on ijmdsm01 AIX 3 5 00C97C6E4C00
Logfile for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-R,-f,/tmp/csm53771.conf,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01)      [Thr 01]   Mon Mar 26 13:29:05 2007
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/DSM_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/DSM_00/sapccmsr/csmconf
INFO: Central Monitoring System is . (found in config file)
INFO: additional Central Monitoring System is . (found in config file)
INFO: found ini file /usr/sap/ccms/DSM_00/sapccmsr/sapccmsr.ini.
INFO: Checking Distributed Statistical Records Library dsrlib.o
INFO: checking version an Unicodeness of dsrlib.o
INFO: DSR: Dynamic Library dsrlib.o (version 22) successfully loaded.
INFO: DSR: Dynamic Library dsrlib successfully loaded.
INFO: DSR: Path /usr/sap/ccms/DSM_00/dsr for Distributed Statistical Records.
INFO:         CCMS version 20040229, 64 bit, multithreaded, Non-Unicode         compiled at Oct 28 2006         systemid 324 (IBM RS/6000 with AIX)         relno 7000         patch text patch collection 2006/4, OSS note 914721         patchno 83         intno 20050900         running on ijmdsm01 AIX 3 5 00C97C6E4C00         pid 479452         profile /usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01
INFO: Attached to Shared Memory Key 73 (size 40000000), no pool used
INFO: Connected to Monitoring Segment           segment status WARM_UP           segment started at Thu Mar 22 08:58:40 2007           segment version 20040229
INFO: DSM:000:999999 connected to DSM, host ijmdsm01, System Nr. 00, traceflag
INFO: DSM release is 700 , (kernel release 700 )
ERROR: DSM:000:CSMREG calling SALS_MS_GET_LOCAL_MS_INFO via RFC failed, can not get version of DSM. RfcRc = 2, C_CALL_FAILED</b>
INFO: SLM:000:999999 connected to SLM, host rthuas50, System Nr. 10, traceflag
INFO: SLM release is 700 , (kernel release 700 )
INFO: SLM:000:CSMREG connected to SLM, host rthuas50, System Nr. 10, traceflag   INFO: SLM release is 700 , (kernel release 700 ), CCMS version 20040229      INFO: RFC logon info for SLM:000:CSMREG can be updated at any time with -R option:        sapccmsr -R           INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/DSM_00/sapccmsr
ERROR: Registration failed: Can't get version of DSM. RfcRc = 2, C_CALL_FAILED RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO message: status: EXCEPTION C_CALL_FAILED RAISED intstat:      Mon Mar 26 13:29:10 2007   INFO: dsr: dsrlib unloaded.
...closing this logfile...
Registration of CCMS Customizing Destination
Error during registration of CCMS Customizing destination
Source system cannot be set to Unicode

Hi,
Check these notes.
641339 - RZ20: CCMS monitoring context loses client assignment
558608 - Correction: Starting/stopping LDAP Connector via CCMS
827843 - Access Alert Analysis Methods that are Defined Locally
Feel free to revert back.
--Ragu

System refresh from non-cluster to a MSCS cluster system

I have a system (call GTA) running NW 7.0 SR2 with both ABAP and Java instance. It runs on WIndows 2003 64-bit and SQL Server 2005. Now we want to migrate to a new set of hardware with Microsoft cluster (MSCS). I have installed this new system (Call GTB), MSCS clustered with both ABAP and Java instance and running no problem.
Now I am at the last point of the migration -- which I need refresh database GTB from GTA to capture live data. In WAS 6.40 ABAP, I just need perform a database backup/restore and execute SAPINST tool and everything works. Now based on SAP's "System Copy Guide", I need run export on source system and then run import on target system. In source system, it seems straight to export since it's central system (ABAP+ Java). However, when I get to target system, and when I choose cluster, it listed all items I have to choose (ABAP, SCS, 1st node, 2nd node, DB, enqueue, etc). They are exactly the same as a new installation. My questions are:
1. Do I have to go through all these steps for just refresh a database? If I go through these installation, am I overwrite something in my GTQ from GTA unnecessnaryly?
2. Can I just perform a database backup/restore? But what kind steps I need do to make cluster work after database refresh since original databse (GTA) is not a cluster system?
I appreciate you can provide some advise and share some experiences.
Thanks,
Yujun Ran

Hi
I have used the FROMUSER and TOUSER option of the IMPORT cmd to perform a system copy like you have described.
Steps:
1) Export BW4 (EXPORT USER=SAPBW4 ... )
2) In MCOD database, delete/drop all objects belonging to SAPBW1. From memory, I think I found it easier to DROP USER SAPBW1 CASCADE and the recreate the SAPBW1 user.
3) Import BW4 export (IMPORT FROMUSER=SAPBW4 TOUSER=SAPBW1 ..)
I don't use MCOD anymore because it is such a pain to refresh the systems.
Regards
Doug

SMD database monitoring for Java MSCS cluster system

Dear All,
We have install SAP netweaver 7.0 EHP1 java stack on oracle 10.2.0.5 with windows 2008 R2 MSCS cluster enviornmant.
now we are configuring SMD
From SMD, while configuring Managed system(JAVA ONLY system)--> database monitoring I am getting following error
DB connection Id :%_SID_virtualhost_SAPSR3DB
Connectivity test :
Database history :This connection could not be tested, thus the DB performance warehouse was not set up
Extractors activation :This connection could not be tested, thus the DB extractors were not set up
Connectivity test details :
Database connection %_SID_virtualhost_SAPSR3DB : SQL error 12505 ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
Database connection :%_SID_virtualhost_SAPSR3DB could not be established
System Details
Solman - SAP EHP 1 for SAP Solution Manager 7.0
managed system - Netweaver 7.0 ehp1AS JAVA(New Installation)
Connection parameters
Database Name: SID
Database Host :virtual host
TNS Name:SID.WORLD
User Name:SAPSR3DB
Password:xxxxxxxxxxx
Tns ping command is also not working when we give host name as virtual host of JAVA system
but when we change it to phyiscal IP address of the cluster server it is working fine.
Could you please let me know any setting need to be done
Sincerely
Paresh

Hi Paresh,
>> Tns ping command is also not working when we give host name as virtual host of JAVA system
but when we change it to phyiscal IP address of the cluster server it is working fine.
>> SQL error 12505 ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
Virtual hostname must be resolved on both hosts while configuring SMD. Otherwise you'll not able to access Oracle Listener.
Best regards,
Orkun Gedik

How to install forms 6i runtime using windows Systems Management Server?

Hi,
Our clinents are using oracle forms 5 application and we want to upgrade to forms 6i ( client /server ).
How to install oracle forms 6i and reports 6i runtime in multiple client machines
using windows systems management server instead of installing one by one manually.
Regards

Here is a quick summary on why this works...
The Problem:
The issue relies with the method and logic that MDT’s scripts use to query and validate that the proper disks, partitions and storage space reside before starting the installation of Windows.
Essentially what you have configured in the Task Sequence and the UNATTEND.xml is analyzed by the MDT scripts then a validation is completed against the hardware in which you wish to install Windows
on and if there are any errors you will be prompted with MDT Error or Warning dialogs.
The problem is that the MDT scripts use WMI to query the hard disk, partition and free space requirements for Windows, but in the case of using GPT disk, the 2nd partition (MSR) that you have to create
is hidden. The class that WMI uses for its query can’t see the MSR partition so instead of 3 partitions, it returns 2 in the query results; hence why DISK 0 PARTITION 3 doesn’t work as mentioned earlier when configured in the MDT Task Sequence.
Although the above still confuses me as to why it works with DISK 0 PARTITION 2 since the WMI query results return PARTITION IDs 0 and 1 when it should return 1 and 2…
The Windows Pre-Installation Environment however does see all 3 partitions correctly and we tried configuring in our Task Sequence to install Windows to DISK 0 and PARTITION 2 and in the UNATTEND.xml
file to install Windows to DISK 0 and PARTITION 3 but due to timing issues of the way Windows installs with MDT, did this not work for us.

Any body has an idea how to install xmgrace plotting software in macpro system

please help me regarding the installation of xmgrace plotting software in macbook pro

Google, "xmgrace mac" and see all the links to what you want and more. I found this one:
https://www.wiki.ed.ac.uk/display/ComputerSimulations/How+to+install+xmgrace

How to install two oracle database on one system

i want to install two oracle databases on single system how it is possible
how i can manager oracle home and is this possible to install two different version of oracle in single home or single system forexample oracle 9 and oracle 8 .
A.R

Hi,
yes, u can have more databases on a single machine and they can be of different versions.
You have to use and initialize the correct ORACLE_HOME to create the DB of the version U use.
For ex, u have 2 homes:
C:\Oracle\Ora817 8i home and C:\Oracle\ora920 9i home
Normally, using OFA, imagine that You want create 2 db, TEST_8I for 8i home and TEST_9I for the 9i home, You shold have:
C:\Oracle\Admin\TEST_8I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_8I for 8i DB adn C:\Oracle\Admin\TEST_9I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_9I for the 9i version.
It is important, when You create the DB, that u use the executables of C:\Oracle\Ora817\bin to create 8i db and C:\Oracle\Ora920\bin for the 9i one.
Then U can use the 9i listener to manage both instances
Hope this helps
Max

How to install CCMS agent in MSCS cluster system?

Similar Messages

Maybe you are looking for