How to install certs for web access
Hi all: While I have done this several times using ConsoleOne in previous versions of GW, I cannot seem to find a good write-up on installing certificates for Web Access in GW 2014. I came across this TID (https://www.novell.com/support/kb/doc.php?id=7010584) but I am not sure this applies to Web Access. Can anyone point me to a How-To or TID which describes installing certs specifically for Web Access (2014)? We are running GW 2014.0.1 on an OES11 SP2 server.
Thanks, Chris.
Hi Chris,
The TID you referenced in your first post also applies to WebAccess.
When running GroupWise/WebAccess on OES/SLES/Linux, it's not really about doing something for GroupWise WebAccess, but about doing something for Apache. So you can approach this as a generic Apache thing.
Originally Posted by cmosentine
PS: Our certs are from GoDaddy. We have two files, ourdomain.crt and sf_bundle.crt. If I follow the TID I referenced, I am not sure where these should be placed in the configuration file.
If you have those files you can add them to the apache2 configuration as the TID mentions.
You are missing one file in your listing.... the key file. Without the key file, it won't work.
If you have those three files on the webaccess server, simply add lines to the vhost file;
SSLCertificateFile </path/to/ourdomain.crt)>
SSLCertificateKeyFile </path/to/ourdomain.key)>
SSLCertificateChainFile <path/to/sf_bundle.crt>
Then reload Apache.
Also make sure root is the only user that can read those files (mainly important to shield the key file used).
If there are no errors upon reloading Apache, the new certificates should then be in use.
In general, this blog post might give some more insight on the openssl process :https://www.digitalocean.com/communi...-keys-and-csrs
There are many others that might explain it better.
Cheers,
Willem
Similar Messages
-
How to install Workshop for WebLogic and WebLogic Portal?
Hi All,
I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
we need to install the Workshop for WebLogic and WebLogic Portal.
Please suggest me where should i get the required environments/IDE?
Thanks,
Harish.Hi Harish
1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
http://www.oracle.com/technology/software/products/wlp/index.html
2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
Here are the links for quick start guide for portal development. Please do refer them.
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
HTH
Ravi Jegga -
How to install extension for all users?
How to install extensions for all users? I'am using Windows
Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
administrator" doens't work.Xych wrote:
> How to install extensions for all users? I'am using
Windows Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
administrator" doens't work.
You may have to log in as the Administrator user rather than
"run as adminstrator".
Beyond that, are there really enough users on a system that
they can't install the extension(s) they need themselves?
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
How to set sourceURL for MS Access database in other computer?
How to set sourceURL for MS Access database in other computer?
getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess");
How do you determine the port for the MS Access?
Thank you very much.How to set sourceURL for MS Access database in other computer?You don't.
How do you determine the port for the MS Access?You don't.
Databases like Oracle and MS SQL Server have 'server' software which runs on a server computer. Requests talk to that server software. MS Access does not have a server, so there is nothing to talk to.
You either must use a DSN or create you own server. For the DSN each client must have a mapped driver to the computer with the database. For your own server search the Sun site for JDBC drivers or use RmiJdbc (http://www.objectweb.org/) -
How to activate trace for web services
Hi Experts,
How to activate trace for web services in SOAMANAGER.
We are not able to view the Payload trace of the error logs.
Can anyone please let me know how to go about this???
Regards,
AshwiniHi Ashwini,
The thread below might be useful to you:
[SOAMANAGER - Get the XML generated;
Regards, Trevor -
How to install WebGUI for SAP 4.7 EE
Hi
How to install WebGui for SAP 4.7 E.E.
Regards
SriniFor this you need install ITS -->
http://help.sap.com/saphelp_47x200/helpdata/en/34/b20d38df9e9010e10000009b38f8cf/frameset.htm
and read all topiks like
SAP GUI for HTML Requirements
Starting the SAP GUI for HTML
Internet Transaction Server
Regards. -
Hi
How to install GRID for EBS applications.Any Docs please let me know
"E-Business management pack for GRID for monitoring EBS applications"Please refer to:
Note: 394448.1 - Getting Started with the Application Management Pack for Oracle E-Business Suite (Releases 2.0 and 2.0.1)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394448.1
Note: 568069.1 - How to Verify Grid Control Version And Application Management Pack Version Integrated With Oracle Applications EBS?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=568069.1 -
How to install drivers for ati radeon 3200?and how to config xorg.co ?
how to install drivers for ati radeon 3200?and how to config xorg.conf?
mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier -
How to install safari for mac .... after deleting it
how to install safari for mac .... after deleting it
so i had a mallwere saying call the x number so that we can fix ur safari and i didnt call them because its not a USA number . so i had to delete the safari from my mac ... now i want to install it again ... and am not able to do that can someone help me out with that ? thanks...
KaramYou will have to reinstall OS X. In the future ignore such things. Don't click on any links or dial any phone numbers. They are all phishing scams.
Deleting Safari was not a solution.
Remove Browser Pop-up Problems
AdwareMedic
Adblock Plus 1.8.9
remove adware that displays pop-up ads and graphics on your Mac -
How to install license for expired SAP J2EE engine?
Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: <b>how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?</b>
Waiting for the reply.
regards,
AnandDear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh -
How can scan coins for web use?
How can scan coins for web use?
Did you Google "Scanning Coins"?
http://www.telecoins.com/scanning.html
If you have a specific question after reading the (somewhat dated) article, please post back! -
How to write API for web cam?
who knows how to write API for web cam?
if you mean capture from the cam try JMF I've done it a million times
salut -
Windows Home Server 2011, How to Turn off Remote Web Access for Dashboard completely?
I have a Dell Server at my House and i thought it would be a good idea to use it to run a website on so, i set up Apache and get it installed. But then every time I type http://localhost/ it would always Come up with the remote web access! So i thought
ok no problem you can disable that in Dashboard. Well i was wrong when i typed http://loacalhost/ it came up with the Proceed Anyways option but sent me to a Big
Bad GateWay. So what im trying to get at is i need to Fully Disbale that Remote Web access or Set a specific Port so it does not interfere with port 80. So does any one know how to fix this or get rid of this issue?This one may help.
http://technet.microsoft.com/en-us/library/remote-access-overview.aspx
I'd ask them more over here.
http://social.microsoft.com/Forums/en-us/home?forum=whs2011
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
How to install IGS for the ABAP trial version SP11
Hi,
Please can anyone provide me with the steps to install IGS for the ABAP trial version SP11.
Which version of IGS to download?
What are extracting the SAR files what steps should be followed?
Please advice,
Thanks,
samHi Rich and Sam,
here is some kind of how to guide which hopefully contains all steps you need do perform.
Best regards
Matthias
The IGS consists of a directory structure under DIR_INSTANCE/igs (containing folders and configuration files) and executables and libraires under DIR_EXECUTABLE. These excutables and libraries are available on the Service Marketplace in archive igsexe.sar. This file has to be extracted to DIR_EXECUTABLE.
On the Service Marketplace you also find the file igshelper.sar which contains the above mentioned folder structure that must be extracted to DIR_INSTANCE. Normally this comes with a Web AS installation.
Afterwards please go to DIR_INSTANCE/igs/conf and rename the files gfwchart.tpl, xmlchart.tpl and bwgis.tpl to gfwchart, xmlchart and bwgis, see notes 531668, 596825 and 1011372.
To include the IGS to the start of the system you have to add the following to the start profile:
Start internet graphics server
IG = $(DIREXECUTABLE)\igswd$(FT_EXE)
Start_Program_03 = local $(_IG) -mode=profile pf=$(_PF)
Normally parameter _PF is defined as absolute path to the instance profile. If not use the absolute path instead.
To enable HTTP administration you have to add the instance profile parameter:
igs/listener/http= 4$(SAPSYSTEM)80,administration
HTTP administration access was disabled by default with patch 4, see note 959358.
If your system is a Java only system you must deactivate the RFC listener with the instance profile entry:
igs/listener/rfc=disable
For using the IGS with Web Dynpro Java you must define the IgsUrl according to note 704604. After a system restart the IGS should be up and running.
You can test if the IGS is up and running with the link http://localhost:4$(SAPSYSTEM)80 or in an ABAP system via report GRAPHICS_IGS_ADMIN. -
How to configure SSO for web dynpro ABAP (not web dynpro Java)
Hi Experts,
I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
procedure"
Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
PiyushHi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N
Maybe you are looking for
-
Hi, I've just bought x201 for 2 weeks. Today I tried to rotate the screen in tablet mode so I can get the battery with my hand when I read documents but after rotation and after just 1-2 second it automatically get back to primary landsacpe view an
-
I have TV shows on my iPod but I can't get them on to my iTunes
HELP ME
-
I got a Color LaserJet CM2320nf MFP and I would liket to lock it down when it is not in use.
Hello. Is there some kind of pincode I can lock it down with? So that a unatuized person can´t copy ore fax? /Magnus
-
Incomplete song play: Do replacement iPods do better?
I've had my iPod for less than two months. From the beginning I've had the problem of some songs not playing completely. If a particular song ends early, it will always end at the same point. For some songs they play for a few seconds or several seco
-
Can we add Mac laptop or desktop in domain which runs the Windows OS
Can you add your macbook pro in windows platform Domain?