How to install chinese language in sap ecc 6.0 unicode system

Hi,
I want to install chinese language in my sap ecc 6.0 unicode system,where i would get chinese language in maraketplace.
guide me for the same where i have to get chinese language,how to install in sap.
Thanku

Hello,
There must be already some value in zcsa/installed_languages in your instance profile.
Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
Regards,
Siddhesh

Similar Messages

ASK : How to install Chinese language to my Curve 9300

i use curve 9300, and i there is no chinese language, korean, or japanese, i readed more than ten threads which are discussing the problem, many of them said use the blackberry desktop software, but when i try, there no such option like adding language to device, i've download a lot of desktop software, but different version, but when i open it, i just the same, hope someone know how to help me ..

Hello,
There must be already some value in zcsa/installed_languages in your instance profile.
Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
Regards,
Siddhesh

N78: How to install Chinese language?

My phone comes with chinese language input when I bought it. After I updated it using Nokia Software Updater, the option of the former chinese language input has gone. I checked my phone and found that the chinese input had changed to Taiwan version. I'm from Malaysia and I'm having problem using the Taiwanese Chinese language input. Help me, please. Thanks!!

It seems that somebody flashed your phone. Anyway, the only official way to get a language pack into your phone is to go to a Nokia care center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

How to install Chinese language in to 8800 sapphir...

I recently just received a 8800 Saphire Arte as a gift. But it cannot type Chinese, it can read Chinese but cannot type. is there any program i can install to solve this problem for me?
Thanks so much for helping 3

There are no programs that you can install to enable Chinese input but a nokia care point can add the language to the phone for you.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

How to install Chinese fonts on my application server

Hi Experts,
We are facing an issue in which the Adobe services PDF couldn't able to recognize chinese characters
So, we want to install chinese fonts CNSONG,CNHEI etc on our application server (which is ABAP only system)
Can any one share me the steps to perform for the same.
Thanks in Advance !
Regards
Sandy

Sandy,
Read this sap note first: 195442 - Language import and Support Packages
Refer to below forum & VIdeo on how to install chinese language in SAP system.
how to install chinese language in sap ecc 6.0 unicode system
www.youtube.com/watch?v=UDw_-ObL0z0
Procedure
Language Installation steps (make sure all Support Packages up to date)
1. /nSMLT
Select from menu LANGUAGE -> CLASSIFY
Language = China
Supplementation Language = English (please note this only allow to set ONCE ONLY!!)
click SAVE disk icon
highlight THAI then select LANGUAGE -> IMPORT PACKAGE
Language = China
Path = (the CD above, must be UNIX path if backend is UNIX server!)
2. /nRZ10
Profile = select INSTANCE PROFILE
Click EXTENDED MAINTENANCE
-> then click CHANGE
-> click PARAMETER button at top bar
set install/codepage/appl_server = 8600 (note: 86=Thai, 00=English)
3. /nSE38
execute Program = RSCPINST -> click execute icon
under Enter Languages -> remove German(DE) & add China (CH) {please note ONLY allow TWO languages max)
click SIMULATE button at top bar (this will tell you if any errors, example Code Page not match)
If simulate OK then click ACTIVATE button on top bar.
FINISH u2013 your language is installed & activated!!!!!!!

How to install Russian language in ECC 6.0 ?

Hi ,
Can anybody guide me how to install russian language in the system ECC 6.0 ?
If you send the doc which has step to step explanation or screenshot that will really be benefit.
Thanks
Rajesh

Hi!
1. Get the Russian language package for ECC 6.0
2. Run se38->RSCPINST (Note 42305 - RSCPINST (I18N configuration tool), add language RU and press Simulate
3. Check the log - whether or not Russian locale is installed on your server's operation system. If not - install and configure it
4. add/change required instance profile parameters (transaction RZ10). Language key for Russian is R.
5. Restart application server.
6. Run se38->RSCPINST and press Activate. Check the log.
7. Run transaction SMLT. Add RU language and choose supplemented language. Supplemented language can be selected once!
8. Run import of the RU language (follow the instructions from the help.sap.com)
9. Once the import is finished, check log, if everything is OK run Supplementation.
10. After importing of the RU language, you must also import the language data in the Support Packages it you installed them before language.
11. Use the Russian language by mention RU in a sapgui field when login
Hope it will help. Please ask if something is not clear enough.
If useful please reward points.
Best regards, Elena

Install Chinese language - SAP

Hello masters,
First time when I need to install a language on a SAP system.
I need to install Chinese language, can you please advise if this can be done online without stopping sap ?
Thanks in advance for help,
Cheers,
Jordan

Still me,
just for info, I have zcsa/installed_languages - EFDJ.
If I make a simulation on se38 - RSCPINST
Required profile parameter modifications:
RSCPINST does NOT change the value of profile parameter.
Please check the value of below parameter(s) after activation.
1) Please update zcsa/installed_languages.
    e.g. Copy the new value and paste it into a field in transaction RZ10
New:                  1EFJM
Current (sorted):
SID     DEFJ
2) Please proceed with Check result for below parameter(s):
Profile parameter               Profile value     Current value     Check result
SID
install/codepage/appl_server                      4102              Obsolete parameter. Remove from instance profile.
Why the letter "D" disappeared ?
Thank you very much for your help.
jordan

Hi Basis guys....... How to Install PI(plug-in) in ECC 6.0

Hi,
How to Install PI(plug-in) in ECC 6.0
please let us know the procedure

Hello,
There must be already some value in zcsa/installed_languages in your instance profile.
Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
Regards,
Siddhesh

MAC Users: how to get Chinese language input for my Bold 9700

Hey everyone, I have a Bold 9700 from AT&T and I need to get Chinese input to work. But all of your solutions are for PC users, and I have a Mac. I am using the latest desk top manager. I can get read Chinese but can't input. there is no option for Chinese input in the application loader. HELP! Thanks

Same here,
I have a bold 9700 with t mobile USA and a macbook pro
how can i install chinese language input? HELP !!!
(apparently it has to do with the desktop manager, no? but the mac version is very basic)
thanks for the help !

Install Chinese Language into Curve 9380

Hi, I am having problem installing Chinese language into my Curve 9380, I have installed the Blackberry Desktop Software and install the most updated Version 7.1Bundle 2039 into my phone, when I load the "Applications",inside the Blackberry Desktop Software, there is no Chinese language in the "Language and Input Support". It does have a "East Asian Characters and Font Support", but when I tried to change my language to Chinese, I can find it in my phone, my current wireless provider is Celcom Malaysia.
Please assist as I am really get annoyed by this.
Thanks.
Regards,
Lai Men Hua

Hello menhua07,
Welcome to the BlackBerry Support Community.
Language package availability for your BlackBerry® smartphone is determined by your wireless service provider.
For more information regarding this, see the following article:
How to obtain language packs for BlackBerry smartphones - http://www.blackberry.com/btsc/KB13067
You may want to contact them for further information.
Let us know if you have any other questions.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

How to install Romanian Language in Unicode System

Hello,
Please let me know how to install Romanian language in a Unicode system.
What are the steps to install it via SMLT.
What are the profile parameters I have to change.
Other than installation of language, do I have to perform any additional steps for Romanian Language?
Currently we have English, German language in our Unicode system.
Points to be rewarded for any kind of help.
Thanks,
Haleem

Hi,
1.check Delivered Languages service.sap.com/languages.
2.check note 42305
3.In transaction SMLT , Choose Classify Language (Language symbol or F5 )
4.Supplement this language with English or German (Recommended)
5.The language must be defined in the instance profiles so that you can log on in these languages. The relevant parameter is
zcsa/installed_languages.
6.Go to the language for which you want to install extra packages and choose or choose Language --> Import Package
7.in the next screen , enter the path for language packages.
8.start immediately or schedule it .Optionally you can use the target server to exceute this ( to avoid performance issues
,if you are importing in production timings, and you cna exculde this server from logon group )
9.if any problems in importing then analyze the log and restart the import .
10.After importing the languages, you must also import the language data in the Support Packages.Choose Language --->
Special Actions ---> Import Support Packages
11.Go to the language that you want to supplement and choose or Language ---> Supplement Language(this is client specific ,
so execute for each client in your system)

How to install Chinese in Oracle Application Express 4.0?

hi,all
I want to know how to install Chinese in apex 4.0,though I know it's in the folder of "apex/builder/zh-cn",when I use a command like "@ load_zh-cn.sql",and it doesn't work.
and the path is >>>>>>>>>C:\oraclexe\apex\apex\builder
so what can i type in the terminal.
regards
hlee

You might want to go through the documentation here
To execute the SQL script you could either use the SQL script's full path
@C:\oraclexe\apex\apex\builder\load_zh-cn.sqlor
open Command prompt , move to that directory first and then run sqlplus
cd "C:\oraclexe\apex\apex\builder"
sqlplus sys/password
@load_zh-cn.sql

How to backup and restore in sap ECC 6.0 EHP 6 in HANA database

how to backup and restore in sap ECC 6.0 EHP 6 in HANA database

Stop loading your interview questions here - otherwise your user ID will be deleted.
Thread locked!

How to display Chinese language?

There is a plan text file: article.txt, this file includes an Chinese article (Chinese Language).
The web server is English system.
Now I use a jsp file to display the content of this file, I use BufferedReader class to read the content of the file, then display it.
I use contentType="text/html;charset=gb2312" also, but it cannot display Chinese Character correctly.
Can anyone tell me how to display it?

Hi i am having the same problem....how did you do it...can please help me
<pre>
<%@ page import="java.util.*,java.io.*,java.text.*,java.sql.* " %>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<% response.setContentType("text/html; charset=UTF-8"); %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>
</title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<meta name="Generator" content="TextPad 4.0" />
<meta name="Author" content="" />
<meta name="Keywords" content="" />
<meta name="Description" content="" />
</head>
<body bgcolor="#ffffff" background="" text="#000000" link="#ff0000" vlink="#800000" alink="#ff00ff">
<%
request.setCharacterEncoding("UTF-8");
String str1 = "\u7528\u6237\u540d";
String name = request.getParameter("name");
if(name != null) {
// instead of setCharacterEncoding...
name = new String(name.getBytes("ISO8859_1"), "UTF-8");
System.out.println(application.getRealPath("/"));
System.out.println(application.getRealPath("/src"));
%>
req enc: <%= request.getCharacterEncoding() %>
rsp enc: <%= response.getCharacterEncoding() %>
str1: <%= str1 %>
name: <%= name %>
<%
BufferedReader in = null;
ArrayList str = new ArrayList(100);
try {
     in = new BufferedReader(new InputStreamReader( new FileInputStream("c:/Chinadescription\\coldtofu.txt"),"UTF-8"));
     String line;
     while ((line = in.readLine()) != null) {
     line = line.trim(); //
     if (line.equals("[stop]"))
     break;
     str.add(line);
     finally {
     if (in != null) {
     try {
     in.close();
     catch (Exception e) {}
     for (int i = 0 ; i < str.size(); i++) out.println(str.get(i));
%>
<form method="GET" action="testcharacter.jsp" encoding="UTF-8">
Name: <input type="text" name="name" value="" >
<input type="submit" name="submit" value="Submit" />
</form>
</body>
</html>
</pre>

How to install multi language in Portal?

Hi,
Can someone give me the directions in how to install multi
language in Portal? I found the "langinst.cmd" file under
ORACLE_HOME\portal30\admin\plsql, also another
file "langinst.sql" under ORACLE_HOME\portal30
\admin\plsql\nlsres.
I am not quite sure how I can do that, which file I should use.
And once I installed the multi language, can I just go into
portal to create a new content area and using the multi language?
Thanks for any comment in advance!
Kelly.

Hi Kelly
You need to identify parameters for this file and run file. Its
langinst.cmd for WINNT and langinst.csh for UNIX.
1.     From the dos prompt , go to the following directory on
your server.
     Oracle/iSuites/portal30/admin/plsql/
2.     Set the Oracle_Home to = oracle/iSuites/
3.     Run the command
langinst.csh -s portal30 -p portal30 -o
PORTAL30_SSO -d PORTAL30_SSO -c oid -l ar -available
s - schema
p - password
o - < login server - in your case it may be portal30_SSO >
d - <password- maybe portal30_sso>
c - connect string
l - language (which is set to ar )
ar is arabic which i ve set
Good Luck
Regards
Yogesh

How to install chinese language in sap ecc 6.0 unicode system

Similar Messages

Maybe you are looking for