How to install Cisco Device Manger on Window 7

Hello
Is Cisco device manager supported on windows 7 ?
If yes how to install Cisco Device Manger on Window 7?
Please advise
Thanks
Chetan R

You can install the latest DCNM 5.x  for support, please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp179665
Support for Windows 7 and Windows 2008
In Cisco DCNM Release 5.1(3u), the Cisco DCNM server supports Windows 2008 and the Cisco DCNM client support Windows 7.
You can download the DCNM from the Software Download. Device Manager is bundled in DCNM.
For DCNM-SAN installation please see here:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/installation/guide/inst_troubleshoot.html
I hope this helps.
Carlos

Similar Messages

  • How to install ios back i have windows 7?

    how to install ios back i have windows 7

    I don't understand your question.  You mention iOS (iPhone, iPod Touch, and iPad OS) but you say you have Windows 7, and not which of the devices you want to upgrade to iOS 7.  Your question about installing iOS 7 is probably best asked on one fo the forums for your iOS device, like the iPhone, iPad or iPod Touch forums.

  • How to install a fresh copy of windows xp with sp2 on a msi k8t neo

    My specifications:
    CPU: AMD ATHLON 64 - 3000MHZ
    MOTHERBOARD: MSI K8T NEO
    RAM: CRUCIAL MICRON 1024MB DDR
    HDD: WD 120GB ( C: 60GB, D: 60GB )
    HDD: SEAGATE 4GB ( E: 4GB )
    DVD: NEC 3520
    CD: SONY
    The system is on drive C:
    primary master HDD 4GB ( on drive E: )
    primary slave NONE
    secondary master CDR DVD-RW
    secondary slave CDR SONY
    and last HDD 120GB on primary raid ( on drive C: and D: )
    NONE on secondary
    I have 2 floppy disks: on the first one it says G72-PRSA060, Promise 376/378 Driver, Disk 1 of 1
    on the second one it says G72-VASA040, VIA SATA RAID Driver, For VT6420/VT8237, Disk 1 of 1
    Can please someone tell me how to install a fresh copy of windows xp on my computer from scratch? All I know that I have to press F6 at some time and insert one of the disks but I don't know which one. And I don't know when to insert a second disk.
    Thanks for helping me

    Yeah.  I remember when I had that board.  I found the best SATA ports were the Promise ones, but...
    What do you think, Tiresmoke?  You had the same board too if I'm not mistaken.

  • How to install adobe flash player in windows 8?

    how to install adobe flash player in windows 8?

    Windows 8 includes Flash Player for IE. You can update it through WIndows update. If you're unsuccessful, download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)

  • How to install adobe pagemaker 7 in windows 7

    how to install adobe pagemaker 7 in windows 7

    Pagemaker 7 has compatibility issues with Windows 7. You can try, but I expect the installer will not work properly.
    Either move on to InDesign or keep PM7 on your WinXP setup.
    You can also try run the application in Xp compatible mode.

  • How to install hp deskjet 3900 in windows 8

    Please let me know how to install hp deskjet 3900 in windows 8

    Hi, take a look at this HP link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How to install internet explorer 8 in windows 8 pc.

    how to install internet explorer 8 in windows 8 pc.

    Hi,
    Internet Explorer 8 is not compatible to install in Windows 8/8.1 PC.
    As Rob suggested, we could use Internet Explorer 10 (In Windows 8) or Internet Explorer 11 (In Windows 8.1) developer tools to emulate IE8,
    Using the F12 developer tools; Or build a Virtual Machine.
    Besides, here is the download page:
    Internet Explorer 8
    http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx
    Best regards
    Michael Shao
    TechNet Community Support

  • How can install adobe flash player for windows 8 pro internet explorer

    how can install adobe flash player for windows 8 pro internet explorer
    how can instal flash player for internet explorer metro ui 
    where can i watched video tutorial for this or help me please

    I can't tell from the screenshot, but it's possible you are running in the Metro version.  Could you try this page using Internet Explorer in desktop mode to see if that helps?
    right click in the browser and click the tools button
    In the menu that appears, select "view on the desktop"
    Once IE launches in the window, do you see your Flash content?

  • How to instal developer forms6.0 on windows 98

    sir,
    may i know how to instal forms 6.0 on windows 98 with full information.

    Keith you maybe facing an issue with trying to install Photoshop CS2 on Windows 7 in general.  If you have both serial numbers registered, and one of them is a full version, then you can request that your software be unlocked to allow for installation.  Our support team will better be able to determine your eligibility for this.  You can contact them via chat at http://adobe.ly/yxj0t6.

  • How to install AdobeAIRSDK 2.7 on windows 7(help)

    How to install AdobeAIRSDK 2.7 on windows 7 on flash cs5 ver11

    Thanks.
    2011/9/21, chris.campbell <[email protected]>:
    chris.campbell http://forums.adobe.com/people/chris.campbell created the
    discussion
    "Re: How to install Air 2.7 on mac ?"
    To view the discussion, visit:
    http://forums.adobe.com/message/3927906#3927906

  • Kindly provide me how to install odi in my pc windows 7 64bit

    Hi all,
    Plz kindly provide me how to install odi in my lap windows 7 64bit and do we have option to install odi in windows7?
    In windows 7 i already installed oracle 10g database and downloading ODI 11.1.1.5.0 version from oracle site.
    Its a urgent process to me and thanks in advance and guide me .

    Hi,
    for Windows x64 be aware of these pitfalls:
    - you need the "generic" Java version of ODI, not the Windows one (which target x86)
    - you need a 64 bit Java Virtual Machine to run the setup
    - you need a 32 bit Java Virtual Machine to run the application (ODI Studio) after installation complete
    I used JRockit (Java Virtual Machine), and with default settings the JRockit installer overwrite previous installations, even for different processor architecture (ie 32 bit installation overwrite 64 bit).
    So to me the following worked:
    - Install JRockit 64 bit
    - Run ODI installation
    - Install JRockit 32 bit
    - Run ODI Studio.
    Hope it helps,
    Corrado

  • How to install an old PPD on Windows 7 ?

    OK - this will be tricky.
    We are a small offset print shop and use ID CS4 to both design and do our colour seperations with. We use an old(ish) Panther Imagesetter which serves us well.
    We have just purchased a new PC, and as XP pro is hard to get these days, and with Windows 7 clearly the way of the future -  we have taken the leap ... especially as we have updated all our design software to CS4 I thought we wouldn't have any issues.
    However .... Windows 7 will not install the old Panther PPD's - basically tells me that they're not compatible with a 64bit OS.
    Any ideas ? We're a bit stuffed if I can't get this working 

    It's always amazing to me how discussions of PostScript bog down with Windows users.
    It's either Windows users never use PostScript or some other reason I can't understand.
    What is needed is a simple way to place a PPD file on Windows 7 so the user can select the option of writing a PostScript file to disk and referencing that particular PPD. We don't need or want a printer driver in this case because we are not actually printing to any particular device.
    Why someone needs to do that comes under the category of "If you have to ask then you really don't understand the issue so you're probably not ready to receive the explanation."
    But I'll try to explain it. We in printing have been writing PostScript files to disk since it was possible to do so.
    Why do we do it? Because we don't "PRINT" to a printer. We create a file and then "SUBMIT" it to a "RIP" that lets us preview the file or or we pre-process it with additional software that might do something like imposition or color separating or whatever.
    Many times we need to write a PostScript file to disk and distill it as opposed to exporting a PDF directly because either the application has no PDF export or we need controlls for the file creation that are not in the export dialogs.
    Sometimes it's a more complex issue of flattening transparency when the export function is supposed to do it but doesn't work correctly. I know that comes as a shock that an aspect of expensive software might not work correctly and we have to use a work-around but trust me, it happens.
    Not meaning to start a Mac/Windows holy war but this is so easy to do on a Mac. You just place the PPD in a directory and it's becomes available to the application with no need to install a printer driver.
    Now it appears that someone is finally suggesting it might be as simple as:
    1. Drag your PPD to the following path:  c:\windows\system32\spool\drivers\x64\3
    I'll try this an pray that it really is this simple.
    And it is.
    So, we don't need to install the Adobe PostScript (or any other) printer drive to make a PPD available to Indesign for the purpose of writing a PostScript file to disk.
    Life is good again.

  • How To install Java Application[J2SE] into Windows Mobile

    Hi All,
    I have developed an application for Mobile devices[ Windows Mobile] exclusively using Java[AWT].When I try to install , the application in mobile, i got the following error.
    *"MIDlet cannot be installed because critical information is missing from the MIDlet file (.jar). - 13 Please contact the MIDlet provider for more information."*
    I didnt use any midlet classes in my application. So my question is, what the above error denotes? and How to install
    java[AWT] application into mobile?. What are all the requirements to install the application?.
    Thanks in advance.

    Hi David, thank you very much, your information was very useful, finally i got the work done.
    The problem was with the JVM which is im used in my Windows Mobile. And im installed CrE-ME in my mobile
    to execute java application.
    The following link has the details of how to install the JVM and execute the aplication (.jar ).
    http://javatolearn.blogspot.com/search/label/Java%20in%20Windows%20CE%20with%20CrE-ME
    Thanks and Regards
    Baskaran

  • How to install Cisco Agent Desktop 7.6(1) on Win7 X64?

    I am trying to install Cisco Agent Desktop 7.6(1) on my Windows 7 64-bit laptop. This
    error keeps poping up:
    http://i.imgur.com/xtBFm.png
    This directory in the error message does not exist on my computer. Other x86.Microsoft.VC80.CRT... folders exist, but they have different names than the one in the error message window.
    What can I do to install CAD ?

    I ran into a different problem back when WIN7 was released, the error was along the line CAD detected unsporting OS. No matter how I finagled the OS nothing would work. I did read a little blurb to modify the MSI install file and it works quite well. I have since installed my modded MSI Agent Desktop and Supervisor Desktop on WIN7 64bit also no problem at all. Locate yourself a copy of SuperOrca and open Agent Destop.msi and scroll down to LaunchCondition Delete the top two lines
    Condition and Description
    #1 (CADOR) OR ((VersionNT=500 AND MsiNTProductType=1) OR (VersionNT=501) OR (VersionNT=600) OR (VersionNT=500 AND MsiNTProductType>=2 AND NOT SERVER_INSTALLED) OR (VersionNT=502 AND NOT SERVER_INSTALLED))
    #2 (CADOR) OR (NOT (SERVER_INSTALLED OR SUPERVISOR_INSTALLED))
    Save the Agent Desktop.msi to something like Agent Desktop WIN7.msi save it someplace handy and run it.
    You may find you need to run as admin IF your using WIN7 PRO/HOME etc etc Ultimate shouldn’t give you these probs if the application installs yet wont launch go to control panel look into running compatibility etc etc
    If you have odd securities errors while running the program Blame the OS go to the Cisco install folder and give the domain user full control security ect on THEIR folder, this will clear up any client side issues.
    Most who run into this problem delete the two lines indicated above then smooth sailing.

  • How to get the device token in windows phone 8 sliverlight application?

    Hi,
    I am developing a windows phone 8 silverlight application . For my application I want to add push notification service , for this service I have to call one web service in my app . This api requires device token , device id ..etc , I am able to get the all
    the things except devicetoken .
    How to get the device token of a device ?
    any help?
    Thanks...
    Suresh.M

    Most probably device token is the push channel url which is returned by MPNS when a request is made to it.
    Step 3 here: Push notifications for Windows Phone 8
    http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

Maybe you are looking for