How to Install COD2 on a iMac

It worked on windows XP now that broke and we got an iMac its a PC DVD-ROM or do i need to buy a new game specificaly for mac's
it reads the disk as COD2DVD and it wont open in the installer like it would on windows and it dose not know the program to manually use the setup.exe?
can it work?

It has been a while since I played games, but some time back you could use the data files on a pc game cd rom as long as you had the mac game launcher.
you can download the mac version demo from
http://www.apple.com/downloads/macosx/games/demos_updates/callofduty2.html
then you could try exracting the data files from the pc cdrom and using them with the demo. This is a guess but it may work.

Similar Messages

How to install Leopard in my iMac if it has no DL-DVD player?

How to install Leopard in my iMac if it has no DL-DVD player?
My eMac is:
eMac G4/1.25 (USB 2.0) with 2GB RAM

Most PPC Macs cannot boot OSX from USB, they need Firewire... that being said, out of 13 PPC Macs I had one that booted from USB Drives, including Flash Drives, it was my eMac/1.42GHz as a matter of fact, USB drives would show as a boot choice if I held the Option/alt key at bootup, (nowhere else), but It lost that ability when I reset the NVRAM.
The USB boot workaround that works for some is...
Connect the drive to your machine, and find out which partition the OS X system is installed on. I usually find this by going to Disk Utility and looking at the info for the partition on the USB disk with OS X. That is, disk2s3 is usually for a USB disk with no OS 9 drivers installed that is the second disk disk. disk3s9 might be a USB disk with OS 9 drivers that is considered the third disk. There are other ways of finding this out, but in my case, my disk is disk2s3 (the 3 on the end will come into play soon).
Start up the machine in Open Firmware (this is the fun part). Hold Command-Option-F-F right after the machine is turned on.
Here is the moment of truth. If this step does not work, I have had very limited success getting a machine to boot off USB2. In Open Firmware, type devalias, and you should get a list as output. In this list, look for ud, usually below where you see hd (ud is "USB Disk," I presume). If found, it will usually have beside it /pci@f2000000/usb@1/disk1, or something similar. Again, if you see this, I have not had this fail yet.
Now type printenv boot-device, which will usually get you output of boot-device hd:,\\:tbxi. (See where this is going yet?)
Type setenv boot-device ud:3,\\:tbxi where the number after the colon corresponds to that partition number we found in step two. You should get an ok back.
Type printenv boot-device, and you should see the change displayed already. Something like:
boot-device ud:3,\\:tbxi hd:,\\:tbxi"
http://hints.macworld.com/article.php?story=20060301112336384
You'd need to clone the Install Disc to a Flash Drive, or make a DMG of it then Restore it to the Flash drive.

HT2509 How to install Gujarati fonts in iMac?

How to install Gujarati fonts in iMac?

ram_dass wrote:
How to install Gujarati fonts in iMac?
OS X already comes with Gujarati fonts, so you don't need to install anything. Can you not read this page?
http://www.gujaratsamachar.com/
If you want to type Gujarati, you need to go to system preferences/international/input sources and check the box for Gujarati, plus the box for Show Input Menu in Menu Bar, plus the box for Keyboard Viewer. Then select Gujarati from the "flag" menu at the top right of the screen and type. To see which key does what, select Keyboard Viewer from the same menu.
I recommend you do NOT install Gujarati fonts from the internet, because OS X only works right with those provided by Apple. Especially avoid non-Unicode fonts from long ago like Saumil. The international standard is Unicode now.

How to install CC on 30 Imacs without downloading 30 times

How to install CC on 30 iMacs without downloading 30 times?
Thank You

You would use the Adobe packaging tool:
Creative Cloud Help | Packager

How to install CS5 on second iMac when CS6 is out

I have bought the full version of CS5 for my MacBook Pro online at the Adobe shop. Yesterday I received a new iMac 27 and I wanted to install CS5 from the Adobe download using my license key. But I can't find the link to CS5 only CS6. How do I proceed to install CS5 on my iMac?

Here's the link:
Adobe Creative Suite 5 downloads

How to install internet explorer on imac

Hi everyone,
I d like to know how to install the internet explorer on my imac. And please let me know whether it is a peace of cake?
JP

If you are asking because some site is requesting it, you can "fake" it by changing the User Agent in Safari to IE.
To get the Develop menu
http://macs.about.com/od/usingyourmac/qt/safaridevelop.htm
Can also be done in Firefox, using an Add-on. Post back if you want to know how.

Does anybody how how to install a software to imac (intel), does anybody how how to install a software to imac (intel)

does anybody know how to install a new software to imac (intel)?
I have tried and is doesnt' automatically load up when a program is placed in the drive.... its like it isn't reading it or something

In addition to stedman's, you really should not need any software for your camcorder. What is it supposed to do? You already have software on your Mac to work with video: iPhoto and iMovie.
Edit: take a look at this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f85198.html
Make sure to check out the link on iMovie compatibility!

How to install Photoshop elements on iMAC

Having trouble installing Elements disc on iMAC. Anyone have a clue?

The directions on the box simply say to insert disc 3 for the mac version and then follow the on screen directions. When I get the initial screen listing the programs on the disc, installation doesnt start and a message tells me I have selected 1 item but have no KB left.

Somebody can help me how to install windows in my imac

Somebody can help me how to install windows in my imac

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Instructions how to install more RAM Intel iMac 17"

Does anyone know where i can find instructions on how to install more RAM? Preferably with illustrations.
Thanks,

It´s supposed to be a phillips 2 screwdriver. It may also be difficult to open the lid if the screwdriver is too sharp. In Sweden we don´t usually call it by that name. If I only had read my swedish owner´s manual I would have knewn, or if I just had looked at the bottom of the computer before I purchased a phillips 0 screwdriver. That screwdriver might be useful in other situations and was quite cheap though.

How to install windows 7 on Imac late 2009 using Vmware/Vbox

Hey guys. Here's the thing. I've installed Windows 8 on my imac late 2009 but then i realized that there's no bootcamp drivers for it (check image).
everything works fine except for the video drivers that crash everytime when i install any driver (bootcamp or manually).
So I've searched on many forums n i found a guy that could do that by using Vmware/Virtualbox by accessing the full disk n installing it from there.
Here's what we wrote -> (http://forums.macrumors.com/showthread.php?t=1526883)
"Thanks for the suggestions, but installing from usb wasn't working, and refit didn't recognise the external dvd drive too (it was in the list, but when i tried to load it i got an error).
But i found a solution, not usual procedure but still good and easy to do.
I installed virtualbox, created a virtual machine with the full disk access (you'll have to unmount all the partitions first and run virtualbox as root), started installing windows, when the copy of the files ended and the vm was rebooting i simply closed it and rebooted my imac and finished the installation directly on the imac, everything went well...
Thanks again for the help"
Important notes :
- My superdrive is broken
- I can't boot efi windows 7 (cause it needs efi 2.0)
So i might ask u 2 things..
1- Is there a way that i can install all those drivers on windows 8.
2- Can u describe how he did that with Vmware/Virtualbox?

I can't. Just like i said. My superdrive is broken so the only way is to boot from usb but my imac's efi firmware is 1.0 and to boot a windows 7 efi you must have at least efi firmware 2.0. I managed to install windows 8 cause it needed efi firmware 1.0 that's why.

How to install windows 8 on iMac computer

hi there
How do I "install" win 8 on my iMac? The options given are only "setup.exe" on the original disk.

You go to the Apple Support @ http://support.apple.com/kb/ht1461 and follow the instructions posted by Apple. If you have problems you contact Apple Support for assistance.
Apple Boot Camp is not a Microsoft product. It is an Apple product and Apple has sole responsibility for support of their products.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

How to install software on an imac that doesn't have DVD player built in?

I just got my daughter an imac G3 running OS 10.4.11. I went to install iwork onto the computer, and it spit the disc out. i then realized the computer does not have a DVD player built in. How do I install newer software? It runs and plays CD fine. Any help?

Since the other Mac is an eMac, it's a FireWire (400) cable, also called 6-pin to 6-pin. OWC has it.
http://eshop.macsales.com/item/Newer%20Technology/1394A66036/
I'm not sure if Radio Shack has it. Look for something like the above.
An eMac may be one of the models where the optical drive is not accessible over FireWire Target Disk Mode. If the hard drive and optical drive are on the same IDE bus, only the one that is set as Master (usually the hard drive) is available to the other Mac.
So give it a try. If it does not work (eMac's optical drive not accessible from the iMac), you will have to reverse the roles of the two Macs. Start up the iMac in FireWire Target Disk Mode. Connect it to the eMac that is started up normally. Set the eMac to start up from the iMac's hard drive in System Preferences +Startup Disk+ pane. If it's Tiger, your eMac should be able to start up from it. Restart. Insert the software disc and let the eMac install the software onto the iMac's hard drive. After installation completes, change the eMac's startup disk setting back, shut down the eMac, disconnect the FireWire cable, and restart the iMac normally.
Note: Unless you purchased the family license for iWork, it should only be installed on one Mac at a time.

How to install visual basics for iMac?

HOw do I sinstall visual basics for iMac?

If you are referring to the programming language Visual Basic from Microsoft, it is a Windows only product. You'l need to install Windows via BootCamp or virtualization to use VB.

How to install idvd on new imac

My iMac did not come with iDVD pre-installed. How do i download it either from the apple store or from some third party site?
Please help me out thanks!

There is no way to download it. If you want it, you can buy the retail iLife 11 disk version which includes iDVD - either at the Apple store or online resellers. I purchased it because I use iDVD extensively and wanted to make sure that I'd have a way to reinstall if necessary.

How to Install COD2 on a iMac

Similar Messages

Maybe you are looking for