How to install & Configure OLAP & its service?

Can any one guide on installation of OLAP?
I have choosen the option Oracle OLAP while i installed the Oracle database. But the user OLAPSYS + OLAPDBA didn't istall. I gave the privilidges OLAPDBA to system user and then right clicked on OLAP but there was no such thing as to start oracle OLAP manager

What version of the database are you trying to install and configure? If it's 9.0.1 (in which OLAP was a more 'standalone' service with it's own instance manager, process and so on) you'd do better to install 9.2.0.1, and patch it up to 9.2.0.4, as OLAP is much more integral and is installed when you choose the 'Data Warehousing' database type.
Instructions on installing 9.2.0.1 can be found at http://docs.oracle.com, as can instructions on working with the OLAP option.
Mark

Similar Messages

How to install & configure Oracle9i

How to install & configure Oracle9i

Hi,
The Oracle installation mainly depends on which OS are u using.
1.If u are using as a windows platform.... it is easy ..just follow the GUI mode of installation from the 3 disks ..u can download the database from www.otn.oracle.com site.
2.If u are installing on the Unix platform ..then it is little bit tricky and also depends on the which flavour of unix u are using.
For unix installtion ..
1.u have to set the kernel parameters first and then reboot the system.
2.creating the groups dba and oracle .. granting the group privs
3.create the profile file for setting the environ variable...
4.Then follow the GUI mode of installtion for the rest..
about the patches ... u need to be specific about the type of unix flavour ur using and the version.
hope this helps.....
Thanks,
With Regards,
Praveen Shiva

How to install/Configure/Use VT Hash Check to detect Malware/Unwanted programs in Windows?

This just to share the below post with windows users..
How to install/Configure/Use VT to detect Malware/Unwanted programs in Windows?
http://www.windowstechinfo.com/2014/03/how-to-installconfigureuse-vt-to-detect_29.html
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

That is interesting. Normally a bootmgr error message means that the boot loader is corrupt and hard disk not "dead".. Replacing the hard drive is a quickie shotgun method of resolving the issue.
Did you give up on the SSD?
The desktop ( w/ASUS Crossfire V Formula-Z mobo) I am using to type this, has the same SSD that you asked about. I used the method I described in the earlier post to clone the OS to the SSD. The SSD is the boot drive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

XI3.1: How to install Fix Packs and Service Packages

Hi there,
I'm a Business Objects newbie
I'm searching a guide which explains me, how to install Fix Packs and Service Packages for XI 3.1. And I've one more question: Where can I see the current Service Package in the System?
Best regards,
Andreas

Hi,
You can refer the Install guide from the below URL for the installation of FP's or SP's for BOE.
http://help.sap.com/ ---> go to the Business Objects section and select the FP or SP install guide which you want to install.
-Noor.

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install windows remote desktop services with Microsoft Remote desktop License

Hi
we have plane to install a server in our company, having windows server 2008 R2 - 64 bit. and also buy 10 RD cal.
now how can install RD call after installing windows OS.
kindly help will highly appreciate.
Arvind

Hi Arvind,
On your server, using Server Manager, you need to install RD Session Host and RD Licensing Role Services at minimum. After install you should set the licensing mode to match the type of RDS CALs you purchased as well as Specify the licensing server
name (itself). You may do this in RD Session Host Configuration (tsconfig.msc) or via group policy.
Next in RD Licensing Manager you need to Activate your licensing server. Before you can install your purchased 2012 RDS CALs you will need to contact the Clearinghouse and have them downgraded to 2008. Please have your licensing number,
authorization number, licensing paperwork/emails ready before you call them.
Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
http://technet.microsoft.com/en-us/library/cc754874.aspx
Thanks.
-TP

How to install report server as service in windows

OS : windows XP
oracle 10G isuite
Every time I am restarting my machine I have to start the report server using command rwserver server=repserver10G start in command prompt.
How to install the the report server as service in windows? so that it can be started automatically with machine restart.

You can create one batch file for this command and keep in startup scripts.
-Ammad

How to install Oracle Forms Developer/Services 6i Release to Ubuntu

Oracle Forms Developer/Services 6i Release 2 for Linux
I've downloaded this software for ubuntu but I couldn't install.
Does anyone know how to install this package?

Hi,
To my knowledge Forms Developer/Services 6i Release 2 are not certified for Ubuntu.
Check Certify: www.oracle.com/technology/support/metalink/index.html
Regards,
Martin

How to Install & Configure Web Dispatcher

Hi techies,
How to install and configure SAP Webdisptacher in an existing BI System.
What are the parameters need to be set after installation like ports, memory , profile parameters etc., for webdispatcher.
I am new to this concept
Thx in advance.
Haroon Khavi.

Hi,
The webdisp does not need the SID of the system it is connecting to. The only parameter it needs is a "Unique Instance Number for SAP Web Dispatcher (SAPSYSTEM)".
You can check this with the following command:-
sapwebdisp -bootstrap
If you are installing the webdisp on a server that already has a SAP instance then you have to enter a unique number (not the SAP instance number). You can used any value from 0-99.
This parameter is used for shared memory allocation so should not be the same as the SAP instance or any other webdisp installed on the same server. Of course if there is only the webdisp on the server than any value from 0-99 can be used.
Hope this helps
Michael

How to install & Configure HTMl DB with Ora 9.2 Database

Hi,
I have oracle 9.2.0.4 database installed. I have to install & configure HTML DB to use this database & from sites i have come to know that i can associate it with Ora 9.2 HTTP server too. Can some one explain me if HTTP DB can be installed & configured to user Ora 9.2 Database & HTTP Server. If its possible then pls let me know the steps to follow. Currently i have just ora 9.2.0.4 database installed.
Regds
Rajan Kumar

Rajan,
Please refer to this document: http://www.oracle.com/technology/products/database/htmldb/howtos/howto_use9ir2ohs.html
Thanks,
- Scott -

My first post, how to install Xcode and its stuff

Hi yar..!
          I am Thomas and this is first post... i am interested in developing applications for IPhone.. i had downloaded XCode 4.4.1 and iPhone 4 simulator and ios how to install them i couldnt get idea. how cab i access them... i need the favour of all.
          Help me to develop some application.
          kindly send the documents and videos regarding this. also help me with some links...
Regards and thanks.,
Thomas Franjo

When downloading XCode from the app store, it gets installed in your /Applications/ folder. All resources and tools are included in the XCode bundle and accessible from within the XCode UI.
Apple has a guide to walk you through each step from setting up XCode to deploying your iOS application. It can be found here:
http://developer.apple.com/library/ios/#referencelibrary/GettingStarted/RoadMapi OS/index.html#//apple_ref/doc/uid/TP40011343
Hope this helps!

How to Install, Configure and getting started with Hyperion Web Analyzer9

i have installed both
Hyperion Reporting and Analysis - System 9 Services Release 9.3.1 Microsoft Windows x86 Installer.
Hyperion Reporting and Analysis - System 9 UI Services Release 9.3.1 Microsoft Windows x86 Installer
Now tell me step by step on how to configure and how start Web analyzer
I dont know how to start server/services. (Any Web server required?)
Getting started would be more helpful.
Need help ASAP.
thanks,
Ram

Hi,
First of all have you installed Shared Services as you will need that as that foundation of the installation.
You will also need to install other components such as essbase if you intend to use it with web analysis.
If you have done that, then you will first need a repository to hold Reporting and Analysis information.
Afte start up the configuration utility and select the Reporting & analysis elements and go through the steps entering
details such as shared services connection, repository information.
It should install the components as a service.
You should really read the installation document :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
Cheers
John
http://john-goodwin.blogspot.com/

Mupen64Plus 2.0 hg in AUR; HOW TO install & configure controllers

With version 2.0 Mupen64Plus has undergone large changes "under the hood". Mupen64Plus is now modular, and as such the standard plugins has been split into several different packages/repositories. At the moment there exists the following modules:
* mupen64plus-core
Core module of the Mupen64Plus project
* mupen64plus-ui-console
Console (command-line) front-end user interface for Mupen64Plus v2.0 project
* mupen64plus-audio-sdl
Audio plugin for the Mupen64Plus v2.0 project, using SDL. This plugin is based on the original jttl_audio plugin in Mupen64.
* mupen64plus-input-sdl
Input plugin for Mupen64Plus v2.0 project using SDL. This is derived from the original Mupen64 blight_input plugin.
* mupen64plus-rsp-hle
RSP processor plugin for the Mupen64Plus v2.0 project. This plugin is based on the Mupen64 HLE RSP plugin v0.2 with Azimers code by Hacktarux
* mupen64plus-video-rice
Video plugin for the Mupen64Plus v2.0 project, using OpenGL. This plugin is based on the RiceVideoLinux plugin from earlier versions of Mupen64Plus.
Note however, that mupen64plus-core (or mupen64plus-core-hg on AUR) is just the core, and does not include a frontend. The Qt and GTK frontends have been scrapped, though, and the only existing frontend so far is mupen64plus-ui-console, which is a CLI frontend. You launch a game with mupen64plus-cli, see mupen64plus-cli --help for more information. As a sidenote, I believe that the Mupen64Plus team would appreciate if someone helped with creating a GTK frontend, since I believe the head developer(s) will probably be focusing on the Qt frontend if any.
The Rice Video plugin in Mupen64Plus 2.0 fixes a problem that at least I and another person had with xf86-video-ati and the old Rice, which made us unable to play in fullscreen.
Installing
To get Mupen64Plus 2.0 working, you will need to install all six modules. They are all part of the mupen64plus-hg group, but unfortunately neither yaourt nor the AUR web interface supports groups as far as I know, so you will have to install each module separately. With yaourt:
yaourt -S mupen64plus-core-hg mupen64plus-ui-console-hg mupen64plus-audio-sdl-hg mupen64plus-input-sdl-hg mupen64plus-rsp-hle-hg mupen64plus-video-rice-hg
The only way I can think of to make it easier to install, would be if I created an empty PKGBUILD that simply depended on all the modules, but I find this to not be a technically elegant solution.
Configuring controllers
With Mupen64Plus 2.0, a feature has been added to auto-detect and auto-configure USB controllers, but at the time of writing only a handful of controllers are supported:
* Logitech Dual Action gamepad
* Logitech Cordless Rumblepad 2
* Microsoft X-Box 360 pad
* N64 controller
* SAITEK P880
* Mega World USB Game Controllers
You know your controller isn't supported if you get the following messages when running mupen64plus-cli:
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
Input Warning: No SDL joysticks found
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
If it is supported, you will get something like:
Input: N64 Controller #1: Enabled, using auto-configuration for joystick 'YOUR CONTROLLER NAME HERE'
Input: 1 SDL joysticks found, 1 plugged in and usable in the emulator
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
Now, if your controller isn't supported, there are two things you can do, and I strongly recommend that you do the first, but you will probably want to do both unless you're patient (if your controller works, but you want to configure it, skip to step two):
Step 1:
Follow the intructions on http://www.emutalk.net/showthread.php?t=49731. If you have the old config file, but no longer have Mupen64Plus 1.5 installed and therefore cannot follow step 8 in the post, the controller name shown in
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
will work too. This will allow the Mupen64Plus team to include your controller for auto-detection.
Step 2:
Now you will probably want to configure the controller, especially if it wasn't supported already. You will need to edit the config file ~/.config/mupen64plus/mupen64plus.cfg, since no GUI frontend exists yet. Since revision 55 of mupen64plus-core, Mupen64Plus will create the config file if none exists when launching a game (previously you had to run mupen64plus-cli with the flag --saveoptions to create the config file). Mupen64Plus does not need a config file to run, but if you wish to tweak the settings you will need it.
Now, the section you will be interested in is [Input-SDL-Control1] (and possibly the other controller sections). If your controller is supported already, you will see some default settings and it will be quite easy to edit them. Otherwise the sections will be completely empty. Here follows my [Input-SDL-Control1], which you can copy and change to fit your needs. If you have your blight_input.conf you can use it as a reference to make it easier. For a list of options, see http://www.emuwiki.com/index.php?title= … #Input-SDL.
[Input-SDL-Control1]
# Specifies whether this controller is 'plugged in' to the simulated N64
plugged = True
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 5=Rumble pak
plugin = 1
# If True, then mouse buttons may be used with this controller
mouse = False
# Specifies which joystick is bound to this controller: -1=None, 0 or more= SDL Joystick number
device = 0
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
AnalogDeadzone = "4096,4096"
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
AnalogPeak = "32768,32768"
# Digital button configuration mappings
DPad R = "hat(0 Right ) "
DPad L = "hat(0 Left ) "
DPad D = "hat(0 Down ) "
DPad U = "hat(0 Up ) "
Start = "button(9) "
Z Trig = "button(7) "
B Button = "button(0) "
A Button = "button(2) "
C Button R = "axis(3+) "
C Button L = "axis(3-) "
C Button D = "axis(2+) "
C Button U = "axis(2-) "
R Trig = "button(6) "
L Trig = "button(4) "
Mempak switch = ""
Rumblepak switch = ""
# Analog axis configuration mappings
X Axis = "axis(0-,0+) "
Y Axis = "axis(1-,1+) "
Note:
At the time of writing there is a bug in the parser which requires the extra space after the direction in the hat event, for example "hat(0 Up )". Otherwise it will read the direction as (in this case) "Up)" which is invalid and will be ignored. The trailing space after the ending parantheses is not required, and is merely a side effect of how the program that generates the config file works.
Note that you can combine options:
A Button = "button(2) key(38) mouse(1)"
This will map both button 2 on the controller, key 38 on the keyboard and the left mouse button to the A button in Mupen64Plus.
If anyone encounters any other problems, feel free to ask.

Dheart wrote:...
Someone should add this to "READ BEFORE POSTING"
This is not Ubuntu forum. You shouldn't EVER post such howto on the forum, we have a wiki for that reason. That thing you've written should go the wiki and then post a topic at wiki discussions and ask for opinion.
Please, don't do that again, just contribute to the wiki.
Yes, I'm quite aware that the wiki exists. The reason I'm writing it here is that the GUI frontends will probably come quite soon, and overall this is an early version. I don't see a reason to contribute this to the wiki when it will probably be unneeded and out-of-date relatively soon.

[Solved] How to install/configure GDM?

I'm trying to install and configure GDM without gnome according to these directions:
https://wiki.archlinux.org/index.php/GDM
Unfortunately, those directions do not resemble my system. Anyway, configuring the user to access X fails as follows:
[root@varch arch]# xhost +SI:localuser:gdm
localuser:gdm being added to access control list
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 109(X_ChangeHosts)
Value in failed requet: 0xd
Serial number of failed request: 7
Current serial number in output stream: 9
and the paths in the following command do not exists:
# cp -t /usr/share/gdm/autostart/LoginWindow/ /usr/share/applications/gnome-appearance-properties.desktop /usr/share/applications/gconf-editor.desktop
My system does not have ../gdm/autostart. It has a ../gdm/auto-login.....
Can someone point me the right direction that I need to go? I have X installed and it works. I've tried installing xdm, but was unable to get it to work so now I'm trying gdm.
brass
Last edited by brass (2012-06-19 00:10:35)

May I ask why you want to install GDM, instead of a much lighter DM like lightdm or SLiM (or even why you want a DM at all) ?
I just installed GDM using the instructions in the wiki (to test the instructions), and it all worked as written for me. I installed the DM, then changed /etc/inittab as directed, and rebooted. GDM started and let me log in. /usr/share/gdm/autostart is right where it should be.
Please post the output of these commands:
ls /usr/share/gdm
gdm --version
And I have to ask, when was the last time you did a full system upgrade (pacman -Syu)?
brass wrote:Unfortunately, those directions do not resemble my system.
This should be your first clue that something is very wrong... How did you install GDM?
Last edited by 2ManyDogs (2012-06-17 23:02:31)

How to install & configure OBIA with Informatica & DAC in oracle R12.

Hello,
I have OBIEE 11.1.1.5 on windows and oracle EBS R12.1.1 on server, and i have to install OBIA 7.9.6.3, Informatica 9.0.1 Hotfix 2 and DAC 10.1.3.4.1 on windows, and i don't know how to interconnect with each other.
So could anyone has the step by step installation & Configuration process then please guide me.
Thanks & Regards,
Yogesh.

You'll interconnect them using database connections and server details.
For the same check this link http://docs.oracle.com/cd/E20490_01/bia.7963/e19038/toc.htm
Appreciate if you mark as correct.

How to install & Configure OLAP & its service?

Similar Messages

Maybe you are looking for