How to Install & Configure Samsung CLP-510N?

Hi,
I have downloaded and installed the software driver from Samsung website for CLP-510N but unable to find the printer under the add printer option.
I have then configured the IP address for the CLP-510N in a XP PC. Key-in the IP under the IP in add printer, it came out as generic post script driver, instead of Samsung's driver. Also the Samsung printer installed in the MacBook is no where to appear in this process.
Any suggestions?
Thanks in advance.

Well, you've certainly clarified that it is not a Mac issue but an issue with the printer or printer driver. I have nothing to do with deleting the discussion. Lots of things may relate to Apple products, but Apple prefers that the Discussions restrict themselves to Apple product support, not third-party product support as in your particular case. If you need clarification of this then please read the Terms of Use by clicking on the Help & Terms of Use link in the right sidebar of this page.
Understand I'm not trying to give you a hard time. All that I told you before was that these Discussions are not meant to provide support for third-party products. If you felt that offended you, then accept my apologies.

Similar Messages

How to install a samsung clp 310 driver in the time capsule

how to install a samsung clp 310 driver in the time capsule ?

You do not install the printer driver on the Time Capsule, you install it on your Mac.
Check with Samsung Support for details on how to download and install the driver to your Mac.
Then use System Preferences > Print & Scan to see if your printer is compatbile. Not all printers are compatible with the USB port on the Time Capsule, so if your printer does not appear, it ls likely not compatible for this purpose.

How to install & configure Oracle9i

How to install & configure Oracle9i

Hi,
The Oracle installation mainly depends on which OS are u using.
1.If u are using as a windows platform.... it is easy ..just follow the GUI mode of installation from the 3 disks ..u can download the database from www.otn.oracle.com site.
2.If u are installing on the Unix platform ..then it is little bit tricky and also depends on the which flavour of unix u are using.
For unix installtion ..
1.u have to set the kernel parameters first and then reboot the system.
2.creating the groups dba and oracle .. granting the group privs
3.create the profile file for setting the environ variable...
4.Then follow the GUI mode of installtion for the rest..
about the patches ... u need to be specific about the type of unix flavour ur using and the version.
hope this helps.....
Thanks,
With Regards,
Praveen Shiva

How to install/Configure/Use VT Hash Check to detect Malware/Unwanted programs in Windows?

This just to share the below post with windows users..
How to install/Configure/Use VT to detect Malware/Unwanted programs in Windows?
http://www.windowstechinfo.com/2014/03/how-to-installconfigureuse-vt-to-detect_29.html
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

That is interesting. Normally a bootmgr error message means that the boot loader is corrupt and hard disk not "dead".. Replacing the hard drive is a quickie shotgun method of resolving the issue.
Did you give up on the SSD?
The desktop ( w/ASUS Crossfire V Formula-Z mobo) I am using to type this, has the same SSD that you asked about. I used the method I described in the earlier post to clone the OS to the SSD. The SSD is the boot drive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I install a samsung clp-315 printer under Lion?

I have upgraded to Lion. This morning I uninstalled my Samsung CLP-315 printer (I was trouble shooting & thought it would be easy to re-install). When I try to re- install via the system preferences my computer recognises the printer is there and tries to get the software to drive it from
When I click Add I get this message:
I have also tried downloading the driver from Samsung's Web site but I still can't re-install the printer.
Would appreciate comments/help to get it going again.
Thanks

I had this problem with my Samsung CLX3185, For some other reason I had to restart. After that restart when I got around to it again, I could install it. Hope it helps. Also, Samsung printer software update is available via software update. Suggest run the SW update, restart and try again.

Hint about Samsung CLP-510N Printing with Bonjour

After installing with Bonjour in Printer Utility I had a problem with Samsung's CLP-510N that did not appear with a Windows machine on the network. Using this printer, it simply stalls after appearing to start up OK. It just stops part way through sending a page and refuses to continue. It shows stopped.
I found that if you try to install this printer using Bonjour in the Printer Utility it will not work. However, if you (as per the Samsung instructions) install with IPP (internet printer protocol) in OS 10.4.x there is no problem.
A nice feature in Printer Utility is that the IP address entry does self-complete and shows what printers' address are as you fill out the line.
This may be applicable to other printer related issues with Bonjour. Perhaps it's the way I use my resources, but in short I find Bonjour to be totally useless!
G5 PM 2.0 dual, G4 TiPB DVI 800MHz/1GB, G3 B&W 400MHz Mac OS X (10.4)
G5 PM 2.0 dual, G4 TiPB DVI 800MHz/1GB, G3 BW 400MHz& Mac OS X (10.4.5)

solved my own problem.

How to Install & Configure Web Dispatcher

Hi techies,
How to install and configure SAP Webdisptacher in an existing BI System.
What are the parameters need to be set after installation like ports, memory , profile parameters etc., for webdispatcher.
I am new to this concept
Thx in advance.
Haroon Khavi.

Hi,
The webdisp does not need the SID of the system it is connecting to. The only parameter it needs is a "Unique Instance Number for SAP Web Dispatcher (SAPSYSTEM)".
You can check this with the following command:-
sapwebdisp -bootstrap
If you are installing the webdisp on a server that already has a SAP instance then you have to enter a unique number (not the SAP instance number). You can used any value from 0-99.
This parameter is used for shared memory allocation so should not be the same as the SAP instance or any other webdisp installed on the same server. Of course if there is only the webdisp on the server than any value from 0-99 can be used.
Hope this helps
Michael

How to install & Configure HTMl DB with Ora 9.2 Database

Hi,
I have oracle 9.2.0.4 database installed. I have to install & configure HTML DB to use this database & from sites i have come to know that i can associate it with Ora 9.2 HTTP server too. Can some one explain me if HTTP DB can be installed & configured to user Ora 9.2 Database & HTTP Server. If its possible then pls let me know the steps to follow. Currently i have just ora 9.2.0.4 database installed.
Regds
Rajan Kumar

Rajan,
Please refer to this document: http://www.oracle.com/technology/products/database/htmldb/howtos/howto_use9ir2ohs.html
Thanks,
- Scott -

How to Install, Configure and getting started with Hyperion Web Analyzer9

i have installed both
Hyperion Reporting and Analysis - System 9 Services Release 9.3.1 Microsoft Windows x86 Installer.
Hyperion Reporting and Analysis - System 9 UI Services Release 9.3.1 Microsoft Windows x86 Installer
Now tell me step by step on how to configure and how start Web analyzer
I dont know how to start server/services. (Any Web server required?)
Getting started would be more helpful.
Need help ASAP.
thanks,
Ram

Hi,
First of all have you installed Shared Services as you will need that as that foundation of the installation.
You will also need to install other components such as essbase if you intend to use it with web analysis.
If you have done that, then you will first need a repository to hold Reporting and Analysis information.
Afte start up the configuration utility and select the Reporting & analysis elements and go through the steps entering
details such as shared services connection, repository information.
It should install the components as a service.
You should really read the installation document :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
Cheers
John
http://john-goodwin.blogspot.com/

Mupen64Plus 2.0 hg in AUR; HOW TO install & configure controllers

With version 2.0 Mupen64Plus has undergone large changes "under the hood". Mupen64Plus is now modular, and as such the standard plugins has been split into several different packages/repositories. At the moment there exists the following modules:
* mupen64plus-core
Core module of the Mupen64Plus project
* mupen64plus-ui-console
Console (command-line) front-end user interface for Mupen64Plus v2.0 project
* mupen64plus-audio-sdl
Audio plugin for the Mupen64Plus v2.0 project, using SDL. This plugin is based on the original jttl_audio plugin in Mupen64.
* mupen64plus-input-sdl
Input plugin for Mupen64Plus v2.0 project using SDL. This is derived from the original Mupen64 blight_input plugin.
* mupen64plus-rsp-hle
RSP processor plugin for the Mupen64Plus v2.0 project. This plugin is based on the Mupen64 HLE RSP plugin v0.2 with Azimers code by Hacktarux
* mupen64plus-video-rice
Video plugin for the Mupen64Plus v2.0 project, using OpenGL. This plugin is based on the RiceVideoLinux plugin from earlier versions of Mupen64Plus.
Note however, that mupen64plus-core (or mupen64plus-core-hg on AUR) is just the core, and does not include a frontend. The Qt and GTK frontends have been scrapped, though, and the only existing frontend so far is mupen64plus-ui-console, which is a CLI frontend. You launch a game with mupen64plus-cli, see mupen64plus-cli --help for more information. As a sidenote, I believe that the Mupen64Plus team would appreciate if someone helped with creating a GTK frontend, since I believe the head developer(s) will probably be focusing on the Qt frontend if any.
The Rice Video plugin in Mupen64Plus 2.0 fixes a problem that at least I and another person had with xf86-video-ati and the old Rice, which made us unable to play in fullscreen.
Installing
To get Mupen64Plus 2.0 working, you will need to install all six modules. They are all part of the mupen64plus-hg group, but unfortunately neither yaourt nor the AUR web interface supports groups as far as I know, so you will have to install each module separately. With yaourt:
yaourt -S mupen64plus-core-hg mupen64plus-ui-console-hg mupen64plus-audio-sdl-hg mupen64plus-input-sdl-hg mupen64plus-rsp-hle-hg mupen64plus-video-rice-hg
The only way I can think of to make it easier to install, would be if I created an empty PKGBUILD that simply depended on all the modules, but I find this to not be a technically elegant solution.
Configuring controllers
With Mupen64Plus 2.0, a feature has been added to auto-detect and auto-configure USB controllers, but at the time of writing only a handful of controllers are supported:
* Logitech Dual Action gamepad
* Logitech Cordless Rumblepad 2
* Microsoft X-Box 360 pad
* N64 controller
* SAITEK P880
* Mega World USB Game Controllers
You know your controller isn't supported if you get the following messages when running mupen64plus-cli:
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
Input Warning: No SDL joysticks found
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
If it is supported, you will get something like:
Input: N64 Controller #1: Enabled, using auto-configuration for joystick 'YOUR CONTROLLER NAME HERE'
Input: 1 SDL joysticks found, 1 plugged in and usable in the emulator
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
Now, if your controller isn't supported, there are two things you can do, and I strongly recommend that you do the first, but you will probably want to do both unless you're patient (if your controller works, but you want to configure it, skip to step two):
Step 1:
Follow the intructions on http://www.emutalk.net/showthread.php?t=49731. If you have the old config file, but no longer have Mupen64Plus 1.5 installed and therefore cannot follow step 8 in the post, the controller name shown in
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
will work too. This will allow the Mupen64Plus team to include your controller for auto-detection.
Step 2:
Now you will probably want to configure the controller, especially if it wasn't supported already. You will need to edit the config file ~/.config/mupen64plus/mupen64plus.cfg, since no GUI frontend exists yet. Since revision 55 of mupen64plus-core, Mupen64Plus will create the config file if none exists when launching a game (previously you had to run mupen64plus-cli with the flag --saveoptions to create the config file). Mupen64Plus does not need a config file to run, but if you wish to tweak the settings you will need it.
Now, the section you will be interested in is [Input-SDL-Control1] (and possibly the other controller sections). If your controller is supported already, you will see some default settings and it will be quite easy to edit them. Otherwise the sections will be completely empty. Here follows my [Input-SDL-Control1], which you can copy and change to fit your needs. If you have your blight_input.conf you can use it as a reference to make it easier. For a list of options, see http://www.emuwiki.com/index.php?title= … #Input-SDL.
[Input-SDL-Control1]
# Specifies whether this controller is 'plugged in' to the simulated N64
plugged = True
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 5=Rumble pak
plugin = 1
# If True, then mouse buttons may be used with this controller
mouse = False
# Specifies which joystick is bound to this controller: -1=None, 0 or more= SDL Joystick number
device = 0
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
AnalogDeadzone = "4096,4096"
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
AnalogPeak = "32768,32768"
# Digital button configuration mappings
DPad R = "hat(0 Right ) "
DPad L = "hat(0 Left ) "
DPad D = "hat(0 Down ) "
DPad U = "hat(0 Up ) "
Start = "button(9) "
Z Trig = "button(7) "
B Button = "button(0) "
A Button = "button(2) "
C Button R = "axis(3+) "
C Button L = "axis(3-) "
C Button D = "axis(2+) "
C Button U = "axis(2-) "
R Trig = "button(6) "
L Trig = "button(4) "
Mempak switch = ""
Rumblepak switch = ""
# Analog axis configuration mappings
X Axis = "axis(0-,0+) "
Y Axis = "axis(1-,1+) "
Note:
At the time of writing there is a bug in the parser which requires the extra space after the direction in the hat event, for example "hat(0 Up )". Otherwise it will read the direction as (in this case) "Up)" which is invalid and will be ignored. The trailing space after the ending parantheses is not required, and is merely a side effect of how the program that generates the config file works.
Note that you can combine options:
A Button = "button(2) key(38) mouse(1)"
This will map both button 2 on the controller, key 38 on the keyboard and the left mouse button to the A button in Mupen64Plus.
If anyone encounters any other problems, feel free to ask.

Dheart wrote:...
Someone should add this to "READ BEFORE POSTING"
This is not Ubuntu forum. You shouldn't EVER post such howto on the forum, we have a wiki for that reason. That thing you've written should go the wiki and then post a topic at wiki discussions and ask for opinion.
Please, don't do that again, just contribute to the wiki.
Yes, I'm quite aware that the wiki exists. The reason I'm writing it here is that the GUI frontends will probably come quite soon, and overall this is an early version. I don't see a reason to contribute this to the wiki when it will probably be unneeded and out-of-date relatively soon.

[Solved] How to install/configure GDM?

I'm trying to install and configure GDM without gnome according to these directions:
https://wiki.archlinux.org/index.php/GDM
Unfortunately, those directions do not resemble my system. Anyway, configuring the user to access X fails as follows:
[root@varch arch]# xhost +SI:localuser:gdm
localuser:gdm being added to access control list
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 109(X_ChangeHosts)
Value in failed requet: 0xd
Serial number of failed request: 7
Current serial number in output stream: 9
and the paths in the following command do not exists:
# cp -t /usr/share/gdm/autostart/LoginWindow/ /usr/share/applications/gnome-appearance-properties.desktop /usr/share/applications/gconf-editor.desktop
My system does not have ../gdm/autostart. It has a ../gdm/auto-login.....
Can someone point me the right direction that I need to go? I have X installed and it works. I've tried installing xdm, but was unable to get it to work so now I'm trying gdm.
brass
Last edited by brass (2012-06-19 00:10:35)

May I ask why you want to install GDM, instead of a much lighter DM like lightdm or SLiM (or even why you want a DM at all) ?
I just installed GDM using the instructions in the wiki (to test the instructions), and it all worked as written for me. I installed the DM, then changed /etc/inittab as directed, and rebooted. GDM started and let me log in. /usr/share/gdm/autostart is right where it should be.
Please post the output of these commands:
ls /usr/share/gdm
gdm --version
And I have to ask, when was the last time you did a full system upgrade (pacman -Syu)?
brass wrote:Unfortunately, those directions do not resemble my system.
This should be your first clue that something is very wrong... How did you install GDM?
Last edited by 2ManyDogs (2012-06-17 23:02:31)

How to install & configure OBIA with Informatica & DAC in oracle R12.

Hello,
I have OBIEE 11.1.1.5 on windows and oracle EBS R12.1.1 on server, and i have to install OBIA 7.9.6.3, Informatica 9.0.1 Hotfix 2 and DAC 10.1.3.4.1 on windows, and i don't know how to interconnect with each other.
So could anyone has the step by step installation & Configuration process then please guide me.
Thanks & Regards,
Yogesh.

You'll interconnect them using database connections and server details.
For the same check this link http://docs.oracle.com/cd/E20490_01/bia.7963/e19038/toc.htm
Appreciate if you mark as correct.

How to install,configure and work with omniportlets

Hi,
What are the steps i need follow to install and work with omniportlets.
What are the softwares in need install. Please give required steps.
I downloaded.
1.PDK-Java software, PortalTools (OmniPortlet & Web Clipping), and common libraries
2.Download the preconfigured OC4J.
Is there any additional softwares needed.
I should install Application Server 10g?
I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
Thanks.
NR

Hi,
working with omni portlets they given two installation methods.
1. the preconfigured standalone OC4J with OracleAS PDK.
2 Iinstall OracleAS Portal as part of the Oracle Application Server release, then most of the configurations are already done.
I have
OS: Redhat Linux 4
Browser:Mozilla firefox 1.5.0.3
database:Oracle10g.
I performed 1 method but while openig link http://172.16.122.249:8888/portalTools/omniPortlet/providers/omniPortlet
i am getting the error
Error occurred while rendering Provider Test Page - view the HTML source for more details
I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
what installations i need to done.
Please help me.Thanks
NR

How to install/configure Oracle AS

Does anyone have any links to installing and configuring Oracle Application Server for Oracle 10g release 2 on a standalone desktop? I have installed Oracle 10g R2 and I just want to deploy my Oracle Forms (for 10g) on the Web. Thanks in advance.

Hi,
1. R2 is Oracle Application Server Release 2 (10.1.2)
2. First we have to install full version of R2 Disk1 & Disk2, While Installing we have to select Oracle Universal Installer Option BI & Forms.
3. To Verify what application server and components on Windows goto <Path>\Program Files\Oracle\Inventory\Components.
4. To Check the status of the Server <$ORACLE_HOME>\opmn\bin>opmnctl status -l These will show all the servers and there status.
-------------------------------------------------------------------------------------------+------
ias-component | process-type | pid | status | uid | memused | uptime | ports
-------------------------------------------------------------------------------------------+------
DSA | DSA | N/A | Down | N/A | N/A | N/A | N/A
LogLoader | logloaderd | N/A | Down | N/A | N/A | N/A | N/A
dcm-daemon | dcm-daemon | 4816 | Alive | 1223950571 | 47204 | 553:55:47 | N/A
OC4J | home | 4944 | Alive | 1223950560 | 49460 | 553:55:44 | rmi:12401,jms:12601,ajp:12505
OC4J | OC4J_BI_Forms | 5764 | Alive | 1223950561 | 133072 | 553:56:01 | ajp:12502,rmi:12402,jms:12602
OC4J | OC4J_Portal | 5844 | Alive | 1223950562 | 455584 | 553:56:01 | ajp:12503,rmi:12403,jms:12603
WebCache | WebCache | 3352 | Alive | 1223950563 | 55616 | 553:57:15 | http:7778,invalidation:9401,statistics:940
WebCache | WebCacheAdmin | 3360 | Alive | 1223950564 | 8920 | 553:57:15 | administration:9400
HTTP_Server | HTTP_Server | 3372 | Alive | 1223950565 | 74228 | 553:56:44 | http1:7779,http2:7202
Discoverer | ServicesStatus | 3404 | Alive | 1223950566 | 748 | 553:57:15 | N/A
Discoverer | PreferenceServer | 3480 | Alive | 1223950567 | 9540 | 553:57:14 | N/A
wireless | performance_server | 4056 | Alive | 1223950568 | 35804 | 553:55:55 | N/A
wireless | messaging_server | 3960 | Alive | 1223950569 | 37316 | 553:55:55 | N/A
wireless | OC4J_Wireless | 3460 | Alive | 1223950570 | 64804 | 553:55:55 | ajp:12504,rmi:12404,jms:12604
5. May be You haven't selected Forms option while installing the application server.
Hope these information may helped you.
Thanks
Ram

How to install & Configure Work Flow for OWB

Hi All,
I have installed companion products and now to configure work flow, what schema name should I have to give.
Can anybody tell me please.
Thanks,
Siva

Hi Siva,
If you are going to use workflow only for OWB , then what ever you have done is enough .
Using the Companion CD launch the UI and from the installation options Choose the following option "Oracle Database 10g Companion Product” Installation Type (Install into new Home)
This option will install the HTTP-Server
This option will create the default DAD for workflow
1 In the Middle Tier Configuration screen enter the required parameters
Workflow Schema: Schema Name
DB Host: DB Hostname
Port Number: DB Port on Host
Oracle SID: Database SID
2. Enter the Password for your oracle Workflow Database Account
3. This installation should have created the default DAD "/pls/wf" for you. It is required to restart the HTTP Server using the commands
$ORACLE_HOME/opmn/bin/opmnctl stopall
$ORACLE_HOME/opmn/bin/opmnctl startall
Where ORACLE_HOME is the HTTP Server home
4. Now you can access the Workflow Home Page
Thanks,
Sutirtha

How to Install & Configure Samsung CLP-510N?

Similar Messages

Maybe you are looking for