How to install/Configure/Use VT Hash Check to detect Malware/Unwanted programs in Windows?

This just to share the below post with windows users.. 
How to install/Configure/Use VT to detect Malware/Unwanted programs in Windows?
http://www.windowstechinfo.com/2014/03/how-to-installconfigureuse-vt-to-detect_29.html
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

That is interesting. Normally a bootmgr error message means that the boot loader is corrupt and hard disk not "dead".. Replacing the hard drive is a quickie shotgun method of resolving the issue.
Did you give up on the SSD?
The  desktop ( w/ASUS Crossfire V Formula-Z  mobo) I am using to type this, has the same SSD that you asked about. I used the method I described in the earlier post to clone the OS to the SSD. The SSD is the boot drive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Hello guys..does anybody know how to install and use adobe master collection with the new lion?   I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...   I am a new mac users and I'd like t

    Hello guys..does anybody know how to install and use adobe master collection with the new lion?
    I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
    I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

    Lab79 wrote:
    Are you on Apple's payroll?
    well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
    good luck with apple dude..
    Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
    And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
    <The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
    Great suggestion. You should go with that one, but good luck getting a refund.
    Bye

  • How to install & configure Oracle9i

    How to install & configure Oracle9i

    Hi,
    The Oracle installation mainly depends on which OS are u using.
    1.If u are using as a windows platform.... it is easy ..just follow the GUI mode of installation from the 3 disks ..u can download the database from www.otn.oracle.com site.
    2.If u are installing on the Unix platform ..then it is little bit tricky and also depends on the which flavour of unix u are using.
    For unix installtion ..
    1.u have to set the kernel parameters first and then reboot the system.
    2.creating the groups dba and oracle .. granting the group privs
    3.create the profile file for setting the environ variable...
    4.Then follow the GUI mode of installtion for the rest..
    about the patches ... u need to be specific about the type of unix flavour ur using and the version.
    hope this helps.....
    Thanks,
    With Regards,
    Praveen Shiva

  • How to install app using powershell in sharepoint online - office 365?

    How to install app using powershell in sharepoint online - office 365?

    Hi
    check this similar post
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/1f0cd45a-00e1-4452-bafe-83c6ee3a59db/can-i-deploy-a-sharepointapp-to-office-365-using-powershell?forum=appsforsharepoint
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • How to install and use a plug-in downloaded from the apple site?

    how to install and use a plug-in downloaded from the apple site?

    Emelie,
    which plug-in do you want to install?
    some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
    For others you move the plug-in into to System Library or your User Library:
      Your Hard disk  > Library > Application Support >Aperture > Plug-Ins > Edit
    or
    Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
    If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
    You can tell by the extension, what kind of plug-in it is.
    E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
    Regards
    Léonie
    P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
        Finder >  Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
    To show the System Library:
         Finder >  Go > Go to Folder
    then enter   / Library

  • Need help how to install and use html db

    plz any body can help me i have download htmldb2.0 and want to install and use it with oracle but i do not know how to install and use it first time any body can help me in detail .
    Niazi

    Niazi,
    Included in the 2.0 download are some very comprehensive Installation and Upgrade instructions, I would highly recommend you read those.

  • Formication : How to install and use it

    Hi,
    I need some help. I would like to install and use the Formication CGI but I don't find any documentation usable for someone who never installed any CGI
    Does someone use it and can teach me how to install and use it ? Or maybe there is a documentation somewhere ?
    Thanks for any help

    >I thought it was something well known here.
    I'd never heard of it before.
    Find here the message from the Mac OS X Server Mailing list where I found it.
    Hi all..
    We are currently moving: from WebStar / Lasso 6.x / FMS 5.5 to
    Mac OSX Server / Apache / Lasso.850 / FMSA 8.
    On our WebStar webserver we used FlexMail to handle e-mails sent from a
    html-form, unless we wanted databases/Lasso to get involved.
    I understand FlexMail cannot be used on Apache so I have been looking around
    and searched the list for any tool to do the same job.
    --> What tool to send e-mails directly from web-forms
    with a reasonable option to format the e-mail and
    generate a response page.
    Henning, most of the people that transition from WebSTAR to iTools Apache use Formication.
    Formication is a Perl version of Flexmail, so it has all the features of Flexmail, plus more. It was designed by one of the developers of the original Flexmail.
    When you convert from WebSTAR to Apache you can keep your script intact.
    With iTools, all you need to do is to add the action:
    Flexmail /cgi-bin/formication.pl
    and the .flx handler,
    and the scripts run unchanged.
    >I also found that there is an invisible file
    inside. It's a .htaccess file
    I'd totally missed that, and it's likely to be the
    critical link.
    yes... I supposed it was something important but.... well hidden...
    By default, as shipped by Apple, .htaccess files are
    ignored. You need to explicity enable then in
    /etc/httpd/httpd.conf
    Both 'Action' and 'AddHandler' (the two directives in
    the .htaccess file) require FileInfo override for the
    directory. Therefore, at the very least you need to
    add:
    <pre class=command><Directory /path/to/your/form>
    AllowOverride FileInfo
    Directory></pre>
    to your httpd.conf so that apache will read the
    .htacess file.
    Alternatively, since you have to edit httpd.conf
    anyway, you might just want to add those directives
    to the <Directory> block, which will save Apache
    having to read the file each time the form is used.
    Thanks a lot Camelot,

  • How to install and use icloud in imac windows 7 based

    How to install and use icloud in imac windows 7 based

    Have you carefully read iCloud - Learn how to set up iCloud & iCloud on a Mac?, What do I need? If you are trying to run on Windows 7 on your iMac and ignoring OS X well you're pretty much on your own. You would need to look for supports on Windows forums. If you happen to use BootCamp there is a Bootcamp forum that you can post on for BootCamp and Windows assistance.

  • How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

    How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
    from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

    I think that stuff is for windows, a waste of time trying to use it on a Mac.
    There is no need to download anything for Khmer on a Mac.  Apple provides Khmer fonts and keuyboards with OS X.
    OS X Mountain Lion: Type in another language
    MS Word for Mac does not support Khmer.  Use TextEdit, Pages, Nisus Writer, LibreOffice instead

  • How to instal and use msn?

    I have an iPhone 4S. Can someone help in how to instal and use msn ?

    Go to the AppStore, type MSN into the Search box, click Install next to the MSN app you want, read the instructions provided by the developer.

  • How can I make Use of PS and Ai (offer) in spite of running Windows Vista ?

    How can I make Use of PS and Ai (offer) in spite of running Windows Vista ?

    Once you have signed up, you could - in theory - choose "other version" under the icon on the CC website and install CS6, but I'm not sure if that works for this special offer or only for "full" CC. Anyway, it seems simple enough to upgrade to Win 7 or Win 8 and perhaps you were planning on starting fresh, anyway...
    Mylenium

  • Info on How to install adobe pdf as a printer into my device -printer file in windows 7

    Need information on how to install adobe pdf as a printer in my device-printer file in windows 7. I currently have adobe 8 pro & acrobat distiller on my pc.

    Acrobat appears to be running just fine- I am running windows 7 Ultimate 64 bit. I don't know why it just didn't automatically install- I just replaced an older HD that was going bad. Copied my entire system using windows mirrow image. Adobe pdf converter was in my device and printer file before and now its's not. I did have to reinstall several programs, such as Adobe Acrobat, etc.

  • How to Install & Configure Web Dispatcher

    Hi techies,
    How to install and configure SAP Webdisptacher in an existing BI System.
    What are the parameters need to be set after installation like ports, memory , profile parameters etc., for webdispatcher.
    I am new to this concept
    Thx in advance.
    Haroon Khavi.

    Hi,
    The webdisp does not need the SID of the system it is connecting to. The only parameter it needs is a "Unique Instance Number for SAP Web Dispatcher (SAPSYSTEM)".
    You can check this with the following command:-
    sapwebdisp -bootstrap
    If you are installing the webdisp on a server that already has a SAP instance then you have to enter a unique number (not the SAP instance number). You can used any value from 0-99.
    This parameter is used for shared memory allocation so should not be the same as the SAP instance or any other webdisp installed on the same server. Of course if there is only the webdisp on the server than any value from 0-99 can be used.
    Hope this helps
    Michael

  • [Solved] How to install/configure GDM?

    I'm trying to install and configure GDM without gnome according to these directions:
    https://wiki.archlinux.org/index.php/GDM
    Unfortunately, those directions do not resemble my system.  Anyway, configuring the user to access X fails as follows:
    [root@varch arch]# xhost +SI:localuser:gdm
    localuser:gdm being added to access control list
    X Error of failed request: BadValue (integer parameter out of range for operation)
    Major opcode of failed request: 109(X_ChangeHosts)
    Value in failed requet: 0xd
    Serial number of failed request: 7
    Current serial number in output stream: 9
    and the paths in the following command do not exists:
    # cp -t /usr/share/gdm/autostart/LoginWindow/ /usr/share/applications/gnome-appearance-properties.desktop /usr/share/applications/gconf-editor.desktop
    My system does not have ../gdm/autostart.  It has a ../gdm/auto-login.....
    Can someone point me the right direction that I need to go?   I have X installed and it works.  I've tried installing xdm, but was unable to get it to work so now I'm trying gdm.
    brass
    Last edited by brass (2012-06-19 00:10:35)

    May I ask why you want to install GDM, instead of a much lighter DM like lightdm or SLiM (or even why you want a DM at all) ?
    I just installed GDM using the instructions in the wiki (to test the instructions), and it all worked as written for me. I installed the DM, then changed /etc/inittab as directed, and rebooted. GDM started and let me log in. /usr/share/gdm/autostart is right where it should be.
    Please post the output of these commands:
    ls /usr/share/gdm
    gdm --version
    And I have to ask, when was the last time you did a full system upgrade (pacman -Syu)?
    brass wrote:Unfortunately, those directions do not resemble my system.
    This should be your first clue that something is very wrong... How did you install GDM?
    Last edited by 2ManyDogs (2012-06-17 23:02:31)

  • How to install and use certificates on client?

    Hello everyone, and first of all sorry for my poor, italian-accented english.
    I have some questions about SSL and certificates. I'm developing a java desktop application, which should connect to a https server, authenticate with a previously downloaded certificate and then gain access. Some specs: I work on a Windows Xp Pro machine with Netbeans 6.1 and jdk 1.6.0_07.
    Now, I'm using HttpUnit libraries to connect the first time, login with basic authentication and download the certificate, but after i get it I'm not sure how to install the certificate (using java, it has to be an automated procedure) on the client machine and then how to use it to connect to the server. I've tried to use the code I've found here and after using it I can see the certificate inside Control Panel > Java > Securiy > Certificates > System, but I'm not sure I'm installing it in the correct way and/or in the correct path.
    Everytime I try to connect to the server I get back a HTTP 403 forbidden exception. Does someone know any tutorials/howtos/example codes to suggest to me? Or could tell me what's the right installation procedure using java? Any help would be very appreciated.
    Thanks in advance
    K.

    After banging my head on my keyboard for a lot of hours, I've got it!
    I was trying to install a *.pfx certificate, and that was bad. I tried to convert it in *.p12 or *.cer but that workaround didn't work. Finally I've found a small code to use a *.pfx certificate without installing it and... it works! No more 403 errors now, I can get that damn page. :)
    Here is the class I've used (I've found it somewhere googling around but I've lost the link, sorry. Anyway, I've modified it a little)
    import java.io.BufferedReader;
    import java.io.FileInputStream;
    import java.io.InputStreamReader;
    import java.net.*;
    import java.security.KeyStore;
    import javax.net.*;
    import javax.net.ssl.*;
    public class ConnectWithPfx {
       static final int HTTPS_PORT = 443;
       public static void main(String argv[]) throws Exception {
          // Get a Socket factory
          SocketFactory factory = SSLSocketFactory.getDefault();
          SSLSocketFactory socketFactory = null;
          try {
                KeyStore keyStoreKeys;
                KeyManagerFactory keyMgrFactory;
                SSLContext sslContext;
                keyStoreKeys = KeyStore.getInstance("PKCS12");               
                keyStoreKeys.load(new FileInputStream("mycertificate.pfx"),"certpassword".toCharArray());
                keyMgrFactory = KeyManagerFactory.getInstance("SunX509");
                keyMgrFactory.init(keyStoreKeys, "certpassword".toCharArray());
                sslContext = SSLContext.getInstance("SSL");
                sslContext.init(keyMgrFactory.getKeyManagers(), null, null);
                socketFactory = sslContext.getSocketFactory();
                Socket socket2 = factory.createSocket("www.my.host", HTTPS_PORT);
          } catch (Exception e) {
                e.printStackTrace();
            URL url = new URL("https://www.my.host/mypage");      
            // Open a HTTP connection to the URL assigning the SocketFactory we created before
            HttpsURLConnection conn = null;
            conn.setDefaultSSLSocketFactory(socketFactory);
            conn = (HttpsURLConnection) url.openConnection();              
            // Allow Inputs
            conn.setDoInput(true);
            // Allow Outputs
            conn.setDoOutput(true);
            // Don't use a cached copy.
            conn.setUseCaches(false);
            conn.setRequestProperty("Connection", "Keep-Alive");
            BufferedReader in = new BufferedReader(new InputStreamReader(conn.getInputStream()));
            String line;
            String response = "";
            while ((line = in.readLine()) != null) {
                response += line+"\n";
            System.out.println(response);
    }Hope this could be useful for someone else. Thanks to everyone who read or replied to my thread. :)

Maybe you are looking for