How to install CS5 on second iMac when CS6 is out

I have bought the full version of CS5 for my MacBook Pro online at the Adobe shop. Yesterday I received a new iMac 27 and I wanted to install CS5 from the Adobe download using my license key. But I can't find the link to CS5 only CS6. How do I proceed to install CS5 on my iMac?

Here's the link:
Adobe Creative Suite 5 downloads

Similar Messages

How to install Leopard in my iMac if it has no DL-DVD player?

How to install Leopard in my iMac if it has no DL-DVD player?
My eMac is:
eMac G4/1.25 (USB 2.0) with 2GB RAM

Most PPC Macs cannot boot OSX from USB, they need Firewire... that being said, out of 13 PPC Macs I had one that booted from USB Drives, including Flash Drives, it was my eMac/1.42GHz as a matter of fact, USB drives would show as a boot choice if I held the Option/alt key at bootup, (nowhere else), but It lost that ability when I reset the NVRAM.
The USB boot workaround that works for some is...
Connect the drive to your machine, and find out which partition the OS X system is installed on. I usually find this by going to Disk Utility and looking at the info for the partition on the USB disk with OS X. That is, disk2s3 is usually for a USB disk with no OS 9 drivers installed that is the second disk disk. disk3s9 might be a USB disk with OS 9 drivers that is considered the third disk. There are other ways of finding this out, but in my case, my disk is disk2s3 (the 3 on the end will come into play soon).
Start up the machine in Open Firmware (this is the fun part). Hold Command-Option-F-F right after the machine is turned on.
Here is the moment of truth. If this step does not work, I have had very limited success getting a machine to boot off USB2. In Open Firmware, type devalias, and you should get a list as output. In this list, look for ud, usually below where you see hd (ud is "USB Disk," I presume). If found, it will usually have beside it /pci@f2000000/usb@1/disk1, or something similar. Again, if you see this, I have not had this fail yet.
Now type printenv boot-device, which will usually get you output of boot-device hd:,\\:tbxi. (See where this is going yet?)
Type setenv boot-device ud:3,\\:tbxi where the number after the colon corresponds to that partition number we found in step two. You should get an ok back.
Type printenv boot-device, and you should see the change displayed already. Something like:
boot-device ud:3,\\:tbxi hd:,\\:tbxi"
http://hints.macworld.com/article.php?story=20060301112336384
You'd need to clone the Install Disc to a Flash Drive, or make a DMG of it then Restore it to the Flash drive.

How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

HT2509 How to install Gujarati fonts in iMac?

How to install Gujarati fonts in iMac?

ram_dass wrote:
How to install Gujarati fonts in iMac?
OS X already comes with Gujarati fonts, so you don't need to install anything. Can you not read this page?
http://www.gujaratsamachar.com/
If you want to type Gujarati, you need to go to system preferences/international/input sources and check the box for Gujarati, plus the box for Show Input Menu in Menu Bar, plus the box for Keyboard Viewer. Then select Gujarati from the "flag" menu at the top right of the screen and type. To see which key does what, select Keyboard Viewer from the same menu.
I recommend you do NOT install Gujarati fonts from the internet, because OS X only works right with those provided by Apple. Especially avoid non-Unicode fonts from long ago like Saumil. The international standard is Unicode now.

How to install CC on 30 Imacs without downloading 30 times

How to install CC on 30 iMacs without downloading 30 times?
Thank You

You would use the Adobe packaging tool:
Creative Cloud Help | Packager

I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

You just install it in the OS.
Photoshop gets the fonts from the OS.

How Can I install CS5 Production on iMac with Lion?

The install seems to be going fine and then either a) crashes out or b) continues to the end, but gives an error message saying all applications had an error installing and I need to re-install.
I've tried uninstalling CS5 and running Adobe Cleaner too. Also tried uninstalling Adobe Air. Java is installed. I did that early on.
The Adobe Suport Advisor said I should open the activity monitor and close all conflicting programs, but it didn't list which ones were conflicting.
I was thinking of re-installing Lion, but I'm not sure who to do that since the iMac did not come with any OS discs.
Any help would be much appreciated. Thanks!
Yours truly,
Jeff
Here's a screenshot

Michael -
Thanks for the tip. I'm trying it right now.
I uninstalled CS5
Uninstalled Adobe Air
went through the library and deleted all files with "adobe" in the name (except fonts)
did a search for files with "Adobe" in them and deleted all of those
resinstalled Lion OS
rebooted
downloaded and installed Java Runtime 1.6
rebooted
and now I've just begun re-installing CS5 from the DVDs. I will let you know how it goes. Thanks again!

How to install cs5 w/dvds when new computer has no drives?

How do I install CS5 on my new computer that doesn't have cd/dvd drive, when my cs5 is on DVDs?

You must be on a trial download page to use the links, otherwise you get an error message.
For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us before pasting the link into the address bar.
http://trials2.adobe.com/AdobeProducts/STVD/CS5/osx10/ProductionPremium_CS5_LS7.dmg

Welcome window doesn't appear when installing CS5 on new imac

I'm trying to install CS5 into my new imac but after I inserted the Application disc 1, nothing happens. the welcome window doesn't appear. No window to fill in serial #s, etc. Installed Acrobat with no problem though. Thanks.

Thanks for your response Jeff. I'm still getting myself familiar with Lion and obviously handicapped with these tech stuff so pardon my ignorance. I didn't see the DVD icon the way I used to in earlier OS so just assumed it wasn't working the way Acrobat worked (the first DVD I inserted). Now, I transferred the contents of my backup drive onto my new imac and see both CS4 and CS5 transferred into the Applications folder. Does that mean the softwares are installed or do I need to install them through the DVDs? Don't want to accidentally screw up anything. If I just dragged and deleted CS4, does that completely remove it out of my iMac? thanks so much for your help.
cha

Install CS5 extended on Imac

how do I install CS5 extended on my new iMac? I have read to download trial version then add in serial number - but I cannot find a trial version of CS5 extended.

these are the only cs5 programs available via adobe or its affiliate prodesigntool.com
if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
and activate with your serial.
if you have a problem dl'g, you didn't follow all 7 steps.

Does anybody how how to install a software to imac (intel), does anybody how how to install a software to imac (intel)

does anybody know how to install a new software to imac (intel)?
I have tried and is doesnt' automatically load up when a program is placed in the drive.... its like it isn't reading it or something

In addition to stedman's, you really should not need any software for your camcorder. What is it supposed to do? You already have software on your Mac to work with video: iPhoto and iMovie.
Edit: take a look at this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f85198.html
Make sure to check out the link on iMovie compatibility!

How to install Acrobat 7.0.9 when Reader 7.0.9 is already installed ?

Hi,
I would like to create the package of Adobe Acrobat 7.0.9 Standard. In English and in French.
I have downloaded the Adobe tool : ISTuner7_AdobeAcrobat.exe to create the MST file
The problem is : The computers have already Adobe Reader 7.0.9 installed.
In first hand, when i'm trying to install "manually" Acrobat 7.0 on this computer I have a windows asking me to choose the correct soft to open PDF file (Acrobat 7.0.9 or Reader 7.0)
I choose Acrobat 7.0.9 and continu the installation until the end normally.
In second hand, when i'm running the package, I got error popup 1404 about some key in registry that i don't have enough permission..
But, if I uninstall Adobe Reader and restart the computer before to launch the package of Acrobat, it's doing fine.
So, for me the issue come from some registry key of Reader that i can't modify by the package automatically.
Do you know the righ parameter to add at the msiexec commande line to FORCE the choice of which soft to use to open a PDF file ?
Thank you

From: <[email protected]> | Adobe STRONGLY recommends that you DO NOT not have Acrobat and Reader installed on the | same system. If you have just Acrobat installed, it will perform all the functions | Reader does and much more. Therefore, you should uninstall Reader, install Acrobat, and | DO NOT install Reader again. | Ken F. Not to mention that nobody should be using Adobe Reader v7.x do to all the vulnerabilities in it that are *actively* being exploited ! -- Dave

How to install Photoshop elements on iMAC

Having trouble installing Elements disc on iMAC. Anyone have a clue?

The directions on the box simply say to insert disc 3 for the mac version and then follow the on screen directions. When I get the initial screen listing the programs on the disc, installation doesnt start and a message tells me I have selected 1 item but have no KB left.

Trouble installing CS5 on new Imac Yosemite

Just got new Imac running Yosemite. Trying to install CS5. Old version from a disc. One problem, no disc drive on new machine.
Downloaded CS5 from adobe site and entered serial number. Get error message "not valid serial number for this product"
What am I doing wrong? Installer opens and I get to the serial number page, triple checked serial number from back of DVD case and it still says invalid??
Help!

Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

How to choose vendor's second account when MIR7/MIRO ?

Dear All,
Here is my question, one vendor has two account , when MIRO/MIR7, SAP default the first vendor account as IR 's default datas, how to change it to the second account which I have added in the vendor?
In MIRO/MIR7 there only display the vendor bank details, canu2019t choose. thx

step1 : XK02： In the display vendor: payment transactions I add 2 bank key with different bank account,
step2 : MIR7/MIRO： When after entering PO , system default the PO's vendor's first bank account as the new invoice datas, but sometimes I should choose the second bank account for the vendor's invoice .
I have some try about how to choose the very bank account when entering invoice in MIR7/MIRO , but have no idea about this. And now We have to change the vendor's bank account's sequence for this requirement.
As there has a list for vendor's bank accounts in the payment transactions, then I think SAP should let me choose whick bank account when entering invoice in MIR7/MIRO, and how?
thanks a lot

How to install CS5 on second iMac when CS6 is out

Similar Messages

Maybe you are looking for