How to install Cyrillic package SUNWi5rf from Installation disk?

Hello!
I am a new to Solaris.
I have a spark server with Solaris 9 already installed
with West-european locales.
But I need for work East-european iso8859-5.
I know that it is SUNWi5rf. I found it on installation disk 1 Solaris 9.
Server is situated in remote room and I have an accesss to it by remote access - so I copied content of CD 1 to directory "disk1" from my Windows PC.
Then I tryed to install package using "pkgadd":
pkgadd -d <directory>
but I get a message that directory doesn't contain a package.
Please help!
Viacheslav

Installing the package SUNWi5rf from Solaris 8 disk 1 of 1.
for example:
# pkgadd d /cdrom/sol_8_204_sparc/s0/Solaris_8/Product SUNWi5rfYou need exact path to set.

Similar Messages

How to install Adobe Acrobat xi from a disk?

Trying to install Adobe Acrobat XI Pro from a disk to a new MacBook Air laptop using a portable drive. Prompts are not coming up.

Thank you Rave. I am still experiencing difficulties b/c my serial # is not working: Mac: <Removed>
Says: “Code you entered is invalid” please try again.
Can you help?
Thank you in advance,
Sondra
Sondra LoRe
Program Coordinator
Hands On Classrooms: http://handsonclassrooms.org
University of Tennessee: Food Science & Technology
Office: 865-974-7107
Cell: 865-603-1847
mailto:[email protected]

How to install a package from a disc

i have the file sudo-1.7.2p3.tar on a disk and i need to know how to install a package from a cd, what lines do i need to type to install it?:|

If you are running as root, you can execute that command as ../../b43-fwcutter-011/b43-fwcutter -w "$FIRMWARE_INSTALL_DIR" wl_apsta.o and there is no need for sudo.
Btw, what wireless card is this? Have you tried searching for a pacman package for it?
To access the cd drive, use the mount command. Enter man mount to read the manual. (I assume you do not have a graphical environment set up yet.)
Last edited by fsckd (2010-05-12 04:37:52)

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it?

Googled for an instruction sheet. Got the following.
https://helpx.adobe.com/photoshop-elements/getting-started/install-pse.html
and
https;//helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors.html
(Don't know why the second one didn't turn into a link, that's the url that printed out at the bottom of the page)
In any case it doesn't matter. I returned it to the store where I bought it.
Rule #1; Don't use a product if the people who produce that product (software, hardware, etc.) don't properly support it.
User forums and\or chat lines, are useful and may help. But! They do not constitute proper support (not for installation purposes anyway).

How to install/add packages to org.apache

hi everyone!
i'm pretty new with Java and i wanted to know how to install a package i downloaded from "http://www.apache.org/dist/jakarta/". the package name is poi and i have no clue how to do it so i'll be able to import some classes from it in my code... (i tried to just paste it the file src.zip at the location org/apache but it didn't worked)
thanks for you help,
shimon ;)

"install" isn't really the right word. You'll have to learn to think differently about JARs in Java. because you don't "install" them and your apps don't get access to them via the operating system. They're more like dynamic link libraries or DLLs in Windows parlance.
What you should do is figure out what a standard directory structure for all your applications will be, maybe something like this:
application
+
+------source (put your .java source files in their package structure under here)
+------lib (put your 3rd party JAF files under here)
+------classes (compile your .class files to this directory)
So in this case you'd put the POI JAR under /lib for your project. Tell Eclipse that /source is where it should expect to find all the .java file, that /class is the output directory for all compilations. Right click on the project folder, select "Properties", and add all the JARs to the build class path. Then you'll be all set with Eclipse.
Tell Eclipse that application is the root of your project. Tell

How to Install UTL_SMTP Package in Oracle 8.1.5

Hi
We are trying to use UTL_SMTO package to send mail.
Will this package runs in Oracle 8.1.5? Any restriction on using this package?
How to install this package? Where the SQL for this package is residing.
If anyone can answer for this, we will be thankfull to you.
regards
Santhosh

Hi,
Run d:/oracle/ora81/rdbms/admin/utlsmtp.sql as SYS user. It create the package UTL_SMTP.
Hope this helps.
rukmini

HT201359 HOW TO INSTALL A FREE APPLICATION FROM APP STORE

HOW TO INSTALL A FREE APPLICATION FROM APP STORE??

Sync it as you would anything else. Are you having a problem?
Please turn off your caps lock. All caps indicates shouting and is difficult to read.

How to install multiple packages with pacman?

Hi ,
I guess it's a pretty noobish question but I wonder how to install multiple packages
that have the same prefix with Pacman.
To make myself more clear, I like to install all gstreamer packages and for that I would
like something similar to
pacman -S gstreamer10*
Is there a command that does something like this available? Found nothing in the man pages.
Maybe some tricky stuff with pipes?

sH wrote:Hi ibendiben,
thanks for your help, but I'm afraid, it does not work
I'm so sorry, my fault, I couln't test it, and made some big mistakes.
This time it's working:
pacman -S $(pacman -Ss gstreamer0.10 | sed -n 's#^$[^/]*/gstreamer0.10[^ ]*$ .*$#\1#p')

How to recovery the deleted files from hard disk like images,media files

How to recovery the deleted files from hard disk like images, media files by using c#.net

It's important to define deleted and recovery. You can recover file from the recycle bin using the Win API. Here's an
example in C/C++. You need to
pinvoke SHFileOperation.

HOW TO INSTALL PI_BASIS PACKAGE

I'm new on basis functions, and i want to know how to install PI_BASIS 2006_1
THANKS

Hi Patricia,
PI_BASIS is usually installed using SAP's SAINT (SAP Addon installation tool)
You must download the appropriate package from the service market place, this is usually done via the maintenance optimiser.
There is an SAP note which explains the proceedure of installing (or upgrading to) PI_BASIS 2006.1, please review note 1007796.
- For more details on how to use SAINT, refer to http://help.sap.com/saphelp_nw04/helpdata/EN/26/5a8c38e3494231e10000009b38f8cf/frameset.htm
- For further details on the Maintenance Optimizer see note 1024932.
Best Regards,
Paul

Unable to erase & install from installation disk

Somehow my macmini snow leopard software bit the dust (started with EyeTV corrupting I think) so after pursuing disk repair and other options I tried doing a fresh installation but accidently used an upgrade DVD of Snow Leopard rather than an original installation disk. Install failed. I pulled out my installation disk and tried holding down the C key to boot from disk. The best I get is the whirring grey circle, but I can't seem to get a disk boot up. Happy to do an erase and install on the hard drive - if I can get to it.
Any suggestions on how to force an installation DVD boot up apart from holding the C key down?
All replies appreciated.

Both my iMac and MacBook Pro 13' went down on 13th April - and would not reboot - both had identical failures - which from probability should be extremely low - unless it is due to the same software problem.
After a number of attempts to reinstall 10.6, recovery of my time machine latest backup - all of which failed - just now recovery from time machine to March 30th date with 10.6.2 (just before 10.6.3 upgrade was installed) - finally worked on my laptop. I am going to try it on my iMac desktop tomorrow.
I think your problems are linked to 10.6.3 update as I am convinced - both machines failing
identically around the same time in the same fashion due to same software corruption seems greatly unlikely. I see that others are having problems with mouse etc after 10.6.3 update.
Looks like 10.6.3 update requires a big fix !!

How to install sources for infobject from business content

Hi,
I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
Thanks

Hi daniel,
Inorder to install the business object, you will be require to follow the following steps :
i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc as you want.
v)Now you want to see if there can be some predictive error then go Install --> Simulate Installation.
vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your A-version Material Group will be overwritten by the D-version Material group provided by SAP.
vii)For ur more understanding lets take the example say you have added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X)
Hope it will help.
Thanks,
Deepak Machal

How to install .rpm packages in Fedora Linux?

Hi all
I am trying to download .rpm packages for my Fedora 10 Linux but don't have a clue on how to install those? First of all, when I download them, they automatically go to my Home directory (that is on my desktop). However, when I login to the Terminal and then login as root...and give this command..
rpm -i <rpm file name>
or
rpm -ivh <rpm file name>
...it says, there is no such file or directory. Now, my question is..how do I get these .rpm files (that are on my computer Home) to the root so that the above command can work and actually installs these?
Please help.
Thank you.

error: Failed dependencies:libc.so.6()(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libdl.so.2()(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by binutils-2.15.92.0.2-15.0.0.0.2.x86_64
Before you install any new rpms you need to make sure all dependencies are resolved.
try running rrpm -qR binutils-2.15.92.0.2-15.0.0.0.2.x86_64.rpm
and make sure you install all pre-requisites rpm. It seems to me complaining about in-correct version of glibcc..

How to remove a package built from AUR

Hi!
I hope nobody has ever asked this question, but i didn't find an answer.
I built a package from the AUR repository but i don't use it anymore, that's why i'd like to remove it but i don't know how to remove it from my computer since it doesn't appear in pacman's list
can somebody explain me how to do this?
thanks!
Last edited by Beno@ (2008-08-14 12:57:18)

ok, refer to the man pages for pacman
-S (Sync) is for anything over the internet.
-Q (Query) any operation that is performed locally.
So yaourt -Ss means it will search over the internet in the AUR. If you wanna search locally for a package you use -Q for local query.
makepkg is not a pakcage manager, instead it is a package builder for pacman, pacman is the package manager. As Army already said, once you use makepkg to build the package, you need to install the package with pacman -U
BTW, -U (upgrade) a package.
Need more info, read the man pages.
man pacman
once yaourt is installed
man yaourt
Last edited by rooloo (2008-08-14 14:17:41)

I need to install photoshop cs4 extended from a disk to a new computer because my old computer had a hard drive crash. There is no serial number on the back of the case. How can I obtain a usable serial number?

I have to install Photoshop CS4 extended on a new computer from a disk because my old computer had a hard drive crash. There is no serial number on the back of the case. How can I obtain a usable serial number?

Find your serial number quickly
You can activate software without following up and registering it... at least that was the case in the past. The serial number is normally located on the disc case or a box inside the main box. If you did not purchase the disc from Adobe then it is possible you would have dealt with a redemption code, in which case it would have been up to you to keep a record of the serial number, especially if you did not follow up and register the software.

How to install Cyrillic package SUNWi5rf from Installation disk?

Similar Messages

Maybe you are looking for