How to install d2k release 6i on redhat linux version 7.3?

have you tried using open motif 2.1.30?
the open motif version that comes with the redhat 7.3 is 2.2 and is not compatible with 6i. Once I used open motif 2.1.30 it worked fine. The environment variable setting is very similar to any other unix version. Ensure that you are also intalling the latest patch (10) for 6i (fixed lots of problems).
regards

Similar Messages

How to install D2K 6i on REd Hat LInux?

How to install D2K 6i on REd Hat LInux version 7.3? I have .tar file/

Did you try looking at the documentation?
Regards,
Robin Zimmermann
Forms Product Management

How to install 11.5.9 on RedHat Linux 9, Redhat AS 2.1/3

Hi all...
I am doing a fresh installation of 11.5.9 on RedHat Linux 9, Redhat AS 3.
Can u all help me in this. Plz provide me with the pre-requisite that needs to be done before installing 11.5.9.
My system configuration is:
Pentium IV 2.4 GHz processor.
120 GB of Harddisk.
512 MB of RAM.
I am in need of this. Plz reply ASAP.
thanks & regards
Uruj.
[email protected]
[email protected]

Looks like you guys are talking about installation of PROD environment. Did anyone tried Apps 11i10 with VIS ?
I am running into problem here. In step 4 of 5, the system hangs at "Completed unzip 1229 of 1236". On investigaqtion, I found that the unzipping of file "_pages40.zip" is causing problem. When I tried to manually unzip it, I found that many of the files within this zip is still password protected and hence the file is unable to unzip and system just hangs there.
Does any of you know the passwords here. Any help in this regard will be really appreciated.
And hey, the jsdk 1.4 is now coming along with the Apps installation files and you do not have to install it seperately for 11i10 ver. The apps intallation do that itself.

How to install ECC IDES in RED HAT linux version 5

Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan

> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus

Succes installing 9iAS R2 (release 2) on RedHat Linux 7.3

I had success installing 9iAS release 2 on RedHat Linux 7.3. I used the instructions on http://www.puschitz.com/OracleOnLinux.shtml.
At first, I tried this on RedHat 8.0. Funny thing is: installation of infrastructure failed even though I followed the instructions. Then I downloaded 7.3, followed EXACTLY the same instructions and voila, works like a charm.
Puschitz' instructions are for 9i and not for 9iAS though. Some additions:
1) One of the pre-installation steps there says to set some environment variables, one of them being the SID. It's set to 'test', but of course with standard settings the sid of the database that comes along with 9iAS has a SID of 'iasdb'.
2) Also what I did, was to downgrade the binutils package to the version provided by Oracle here: http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html. As an alternative, Puschitz says to change some makefiles. I didn't try this.
3) I then installed the infrastructure. When finished, I exited the installation and rebooted. After the reboot:
4) I changed to the /bin directory and typed (as root):
ln -s /sbin/fuser
5) Changed back to user 'oracle' and started the infrastructure with:
$ORACLE_HOME/bin/sqlplus
connect / as sysdba
startup
exit
$ORACLE_HOME/bin/lsnrctl start
$ORACLE_HOME/bin/oidmon connect=iasdb start
$ORACLE_HOME/bin/oidctl connect=iasdb server=oidldapd instance=1 start
$ORACLE_HOME/opmn/bin/opmnctl startall
6) Then started the installer and did the middletier installation. Rebooted.

Following your instructions i've also succesfull installation of ias9iR2 Infrastructure on Redhat7.3. Checked the database Iasdb and Enterprise Manager Website (on http://liminwang:1810), everything works fine. Hence i try to install Portal & Wireless on the same machine on a different Oracle_home (but on the same Oracle_base) according to the installation guide. The installation stuck when i've chosen the Portal and Wireless option. I get a warning that the Enterprise Manager Website Process is still running and it must be stopped to proceed the stallation. So i stopped this process by: $oracle_home/bin/emctl stop
Still i get the same warning. Stopping the database also doesn't help. Even when i deinstalled the Enterprise Manager Website component i get the same warning.
Please help!

How to install D2k in Linux

Hello,
Any one can say the steps for how to install D2k in linux.
Thanks&regards
Dhamodaran

Developer 2000 is a deprecated developer platform. AFAIK, By the time it was named D2K it was supported on Windows platforms only (98, NT, 2000), - Linux was not so popular during those old days-.
You could "run" Dev2K on Linux by means of a Virtual Machine. However I suggest you to download a linux compatible Developer Suite 10gR2, it is certified with SLES-9, RHEL4, and OEL4, using a 10gR1 or 10gR2 Database Server.
~ Madrid.

Problem installing Oracle 8.05 on Redhat Linux 7.1

I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]---------------------------------------------
Action: Installing install.
Command: (make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install), Out=/opt/oracle/home/orainst/make.log, Err=/opt/oracle/home/orainst/make.log
chmod 755 /opt/oracle/home/bin
rm -f oracle exp imp sqlldr tkprof mig dbv tstshm maxmem orapwd dbfsize cursize rman genoci svrmgrl extproc ihsalloci ihsots ihsdepxa ogms ogmsctl osh sbttest /opt/oracle/home/rdbms/lib/ksms.s /opt/oracle/home/rdbms/lib/ksms.o
echo " - Linking Oracle " ;\
/opt/oracle/home/bin/echodo cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o \
-lserver -lclient -lvsn -lcommon -lgeneric \
/opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt \
-lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt \
-lslax -lplsf -lplsb -lextp -ldbicx \
/opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o `cat /opt/oracle/home/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql `cat /opt/oracle/home/rdbms/lib/nmliblist` `if ar tv /opt/oracle/home/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lmdknl -lmdhh"; fi` \
-lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql ;
- Linking Oracle
cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o -lserver -lclient -lvsn -lcommon -lgeneric /opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt -lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt -lslax -lplsf -lplsb -lextp -ldbicx /opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql /opt/oracle/home/rdbms/lib/skgxns.o -lmdknl -lmdhh -lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql
/opt/ora cle/home/lib//libplsf.a(spssimb.o): In function `pss_gets':
spssimb.o(.text+0x4ef): the `gets' function is dangerous and should not be used.
/opt/oracle/home/lib//libgeneric.a(skgfr.o): In function `skgfrcre':
skgfr.o(.text+0x4de): the `llseek' function may be dangerous; use `lseek64' instead.
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconsi':
hoco.o(.text+0x104d): undefined reference to `__strtoq_internal'
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconui':
hoco.o(.text+0x126a): undefined reference to `__strtouq_internal'
collect2: ld returned 1 exit status
make: *** [opt/oracle/home/rdbms/lib/oracle] Error 1
Status: 2
(( OIERR-SYSTEM: make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install ))
--------------[ rdbms.ins 2631 ]---------------------------------------------
null

<BLOCKQUOTE>quote:<HR>Originally posted by Nicholas Waltham ([email protected]):
I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]<HR></BLOCKQUOTE>
Well ,I tried to install Oracle 8.0.5 in Debian Potato. At end I desist.
Oracle 8.0.5 works with glibc 5 and Debian Potato with glibc6 .
I guess this is your problem.
There are patches for this but i don't get
to make work.
Sorry for my english.
Cisar

Problem installing Oracle 9.2 on RedHat Linux 7.1 and 9.0

Hi everyone,
As the subject line says, I tried installing Oracle 9.2 on
RedHat Linux 7.1 and 9.0, strictly following instructions
written by Werner Puschitz
(http://www.puschitz.com/InstallingOracle9i.shtml). Both
attempts failed with identical symptoms:
- the installer asks for Disk 2
- after the disk is inserted, it hangs. It turns out that
kernel is writing messages similar to these in
/var/log/messages:
Jun 16 02:45:19 boston kernel: 16:00: rw=0, want=317696, limit=149920
Jun 16 02:45:19 boston kernel: attempt to access beyond end of device
Unless interrupted, this continues until the /tmp filesystem gets full.
Has anyone experienced this? I haven't been able to find
an explanation so far.
Any help would be much appreciated.
Regards,
Ljubomir Buturovic

Providing a thread-bare configuration of your machine on which you are trying to install Oracle on Linux (and mind you - which kernel/distro, coz that's important) would definitely help you elicit more responses to your messages.

Where to download and how to install X Window System for Oracle Linux 5 ?

Folks,
Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
But I don't know where to download and how to install X Window System for Oracle Linux 5.
Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

You can address the problem in a number of different ways.
You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

How to install Order Release Management component

Hi All,
I am running APPS R12. I want to install Order Release management component. Can any one help me how to install this component individually.
Regards
Nadir Pervez.

Check the following thread, and follow the steps outlined there. Instead of AX module, search for the product/module which you want to add:
Add AX module to my system
Re: add AX module to my system

How can I install Oracle database 9i on Redhat linux with OFA

Hello,
From the Unix installation guide:
Note: The Oracle Universal Installer supports, but does not require, OFA. The preconfigured database included with the Database installation type of Oracle9i database is created under a single mount point and is, therefore, not OFA-compliant.
So my question is how to install dabase with OFA structure. I have read the DOCs for OFA, but I still can not understand. I mean, within Oracle Universal Installer, is there some option allow me to support OFA?
Thanks a lot,
Grace

Why IBM said that their 64-bit server can run both 32-bit and 64-bit application in the same time?Because the CPU itself is capable of running both: 32-bit and 64-bit.
In order to do so you need a 64-bit operating system to run 64-bit binaries.
If you use LPARs you can partition your pSeries to have multiple partitions each running a copy of AIX. So you can run 32-bit and 64-bit operating systems at the same time if needed.
But as already pointed out i recommend to use 64-bit because most 32-bit applications will run without problems.
Ronny Egner
My blog: http://blog.ronnyegner-consulting.de

How can i install Busineess Object XI in redhat Linux?

Does BusinessObjects Enterprise XI support clustering and loadbalncing ? If YES, does it supported on Redhat Linux ? Any document or URL on this ?

Enterprise XI does it's own clustering and load balancing for the CMS.Â Business Objects does not support operating third party software to perform this.
I may be wrong but my understanding is that in order to load balance the web-site piece ofÂ XI, you have to have a way to do "sticky" sessions where a single user will always be directed to the same web server during a single session unless that server goes down in the middle of the session.Â So, if you need to load balance the web side of the software, you'll have to install the web component adapter on a separate server from the CMS.
One of the available web components adapters is in Java which should run on Linux.Â I also believe that there is a Linux install available, but I don't know which distribution it's available for.Â Your best be would be to do a search in the Knowledgebase for more info on this.
-Dell
- A computer only does what you told it to, not what you thought you told it to!

Help! Errors in installing 8.0.5 on RedHat Linux 5.2

Hi, everyone:
Oracle free installation support points me here. They said
"Unfortunately, the trial release of Oracle8 for Linux is not
supportedby this group. You can obtain peer support on the
Oracle8 for Linux trialproduct from the discussion group on the
Oracle Technology Network (OTN) (http://technet.oracle.com). "
=================================================================
===
SAVED PROBLEM REPORT:
=================================================================
===
Thu Apr 8 20:28:10 EDT 1999 Platform: unixRelease:
8.0.5Product: rdbms_common
Version: 8.0.5.0.0Area: (Installation) Install
information:
Installer Version: 4.0.3.0.0 Installer Script: [
rdbms_common.ins 907 ]
Install Action: Complete Software/Database Fresh
Install
Stage Home /mnt/cdrom Oracle_Base
/u01/app/oracle (true)
Oracle Home /u01/app/oracle/product/8.0.5
Owner oracle
Log
/u01/app/oracle/product/8.0.5/orainst/install.log
During installation of the above product the error below
is encountered:
Error during action 'Creating ntcontab.o'.Command: make -f
/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
ntcontab.o
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\ rm -f
/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
/u01/app/oracle/product/8.0.5/bin/gennttab:
/u01/app/oracle/product/8.0.5/bin/get_platform: No such file
ordirectory
ntcontab.c:7: sys/types.h: No such file or directory
mv: ntcontab.o: No such file or directorymake: *** [ntcontab.o]
Error 1
=================================================================
===
=================================================================
===
SAVED PROBLEM REPORT:
=================================================================
===
Thu Apr 8 20:29:19 EDT 1999 Platform: unixRelease:
8.0.5Product: rdbms_common
Version: 8.0.5.0.0Area: (Installation) Install
information:
Installer Version: 4.0.3.0.0 Installer Script: [
rdbms_common.ins 907 ]
Install Action: Complete Software/Database Fresh
Install
Stage Home /mnt/cdrom Oracle_Base
/u01/app/oracle (true)
Oracle Home /u01/app/oracle/product/8.0.5
Owner oracle
Log
/u01/app/oracle/product/8.0.5/orainst/install.log
During installation of the above product the error below
is encountered:
Error during action 'Creating ntcontab.o'.Command: make -f
/u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
ntcontab.o
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\ rm -f
/u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
/u01/app/oracle/product/8.0.5/bin/gennttab:
/u01/app/oracle/product/8.0.5/bin/get_platform: No such file
ordirectory
ntcontab.c:7: sys/types.h: No such file or directory
mv: ntcontab.o: No such file or directorymake: *** [ntcontab.o]
Error 1
=================================================================
===
LINUX ENVIRONMENTAL VIABLES DUMPED===========================
Machine Environment:--------------------
User: uid=502(oracle) gid=502(dba) groups=502(dba)
Current Directory: /mnt/cdrom/orainstMachine: {
Linux localhost.localdomain 2.0.36 #1 Tue Oct 13
22:17:11 EDT 1998i586 unknown
[From uname -a] localhost.localdomain [From
hostname]}Ulimit: {
core file size (blocks) 1000000 data seg size
(kbytes) unlimited
file size (blocks) unlimited max memory size
(kbytes) unlimited
stack size (kbytes) 8192 cpu time (seconds)
unlimited
max user processes 256 pipe size (512 bytes)
8
open files 256 virtual memory (kbytes)
2105343}Swap: {
procs memory swap io
system cpu
r b w swpd free buff cache si so bi bo in
cs us sy id
0 0 0 40 9168 14632 56620 0 0 22 16 171
64 4 2 94
[From vmstat]}Disk Mounts: { /dev/hda10 on / type
ext2 (rw)
none on /proc type proc (rw) /dev/hda8 on /boot type
ext2 (rw)
/dev/hdc on /mnt/cdrom type iso9660 (ro) [From
mount]}Disk Free: {
Filesystem 1024-blocks Used Available Capacity
Mounted on
/dev/hda10 1112004 253147 801403 24% /
/dev/hda8 21927 596 20199 3%
/boot
/dev/hdc 397472 397472 0 100%
/mnt/cdrom [From df -k]
}Environment: { HISTFILESIZE=1000 HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=localhost.localdomain HOSTTYPE=i386
LD_LIBRARY_PATH=/u01/app/oracle/product/8.0.5/lib
LOGNAME=oracle
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/8.0.5
ORACLE_SID=ORC1 ORACLE_TERM=386x
ORA_NLS33=US7ASCII OSTYPE=Linux
PATH=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/u01/app/oracle/
product/8.0.5/bin:/bin:/usr/bin:/usr/local/bin
SHELL=/bin/sh SHLVL=2 TERM=linux TMPDIR=/var/tmp
USER=oracle _=/usr/bin/env}
System Tables: {}Semaphores: { ------ Shared Memory
Segments --------
key shmid owner perms bytes
nattch status
------ Semaphore Arrays --------
key semid owner perms nsems
status
------ Message Queues --------
key msqid owner perms used-bytes
messages
[From ipcs -sa] }Shared Mem: { ------ Shared
Memory Segments --------
key shmid owner perms bytes
nattch status
------ Semaphore Arrays --------
key semid owner perms nsems
status
------ Message Queues --------
key msqid owner perms used-bytes
messages
[From ipcs -ma] }/etc/oratab: {}Tracing: { } :
null

Thanks. Actually, I did not set any IPC parameter because I
did know how to set it on Linux. I tried both default and
customized with/without network related option such as net 8,
adapter. I could not get it work. I installed Sybase 11 server
successfully on the same machine. What does that "make" error
means.
Thank you in advance.
John Koo (guest) wrote:
: I 've tried installed Oracle 8.05 and Oracle 8.051 EE on
Redhat
: 5.2 and never encounter any special problem !! I never need to
: change any ipc settings. I suggested you might tried the
: simplest one - install using all default settings and create
: your first database using the Oracle installer. Don't try to
: build your database manually at this early stage.
: John K.
: John (guest) wrote:
: : Hi, everyone:
: : Oracle free installation support points me here. They
said
: : "Unfortunately, the trial release of Oracle8 for Linux is
not
: : supportedby this group. You can obtain peer support on the
: : Oracle8 for Linux trialproduct from the discussion group on
: the
: : Oracle Technology Network (OTN) (http://technet.oracle.com).
=================================================================
: : ===
: : SAVED PROBLEM REPORT:
=================================================================
: : ===
: : Thu Apr 8 20:28:10 EDT 1999 Platform: unixRelease:
: : 8.0.5Product: rdbms_common
: : Version: 8.0.5.0.0Area: (Installation)
: Install
: : information:
: : Installer Version: 4.0.3.0.0 Installer
: Script: [
: : rdbms_common.ins 907 ]
: : Install Action: Complete Software/Database Fresh
: : Install
: : Stage Home /mnt/cdrom Oracle_Base
: : /u01/app/oracle (true)
: : Oracle Home /u01/app/oracle/product/8.0.5
: : Owner oracle
: : Log
: : /u01/app/oracle/product/8.0.5/orainst/install.log
: : During installation of the above product the error
: below
: : is encountered:
: : Error during action 'Creating ntcontab.o'.Command: make -f
: : /u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: : ntcontab.o
: : (if [ "compile" = "compile" ] ; then \
: : /u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
: : cc -c ntcontab.c ;\ rm -f
: : /u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: : mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
: : /u01/app/oracle/product/8.0.5/bin/gennttab:
: : /u01/app/oracle/product/8.0.5/bin/get_platform: No such file
: : ordirectory
: : ntcontab.c:7: sys/types.h: No such file or directory
: : mv: ntcontab.o: No such file or directorymake: ***
: [ntcontab.o]
: : Error 1
=================================================================
: : ===
=================================================================
: : ===
: : SAVED PROBLEM REPORT:
=================================================================
: : ===
: : Thu Apr 8 20:29:19 EDT 1999 Platform: unixRelease:
: : 8.0.5Product: rdbms_common
: : Version: 8.0.5.0.0Area: (Installation)
: Install
: : information:
: : Installer Version: 4.0.3.0.0 Installer
: Script: [
: : rdbms_common.ins 907 ]
: : Install Action: Complete Software/Database Fresh
: : Install
: : Stage Home /mnt/cdrom Oracle_Base
: : /u01/app/oracle (true)
: : Oracle Home /u01/app/oracle/product/8.0.5
: : Owner oracle
: : Log
: : /u01/app/oracle/product/8.0.5/orainst/install.log
: : During installation of the above product the error
: below
: : is encountered:
: : Error during action 'Creating ntcontab.o'.Command: make -f
: : /u01/app/oracle/product/8.0.5/network/lib/ins_network.mk
: : ntcontab.o
: : (if [ "compile" = "compile" ] ; then \
: : /u01/app/oracle/product/8.0.5/bin/gennttab > ntcontab.c ;\
: : cc -c ntcontab.c ;\ rm -f
: : /u01/app/oracle/product/8.0.5/lib/ntcontab.o ;\
: : mv ntcontab.o /u01/app/oracle/product/8.0.5/lib ; fi)
: : /u01/app/oracle/product/8.0.5/bin/gennttab:
: : /u01/app/oracle/product/8.0.5/bin/get_platform: No such file
: : ordirectory
: : ntcontab.c:7: sys/types.h: No such file or directory
: : mv: ntcontab.o: No such file or directorymake: ***
: [ntcontab.o]
: : Error 1
=================================================================
: : ===
: : LINUX ENVIRONMENTAL VIABLES
DUMPED===========================
: : Machine Environment:--------------------
: : User: uid=502(oracle) gid=502(dba) groups=502
(dba)
: : Current Directory: /mnt/cdrom/orainstMachine: {
: : Linux localhost.localdomain 2.0.36 #1 Tue Oct 13
: : 22:17:11 EDT 1998i586 unknown
: : [From uname -a] localhost.localdomain
: [From
: : hostname]}Ulimit: {
: : core file size (blocks) 1000000 data seg size
: : (kbytes) unlimited
: : file size (blocks) unlimited max memory size
: : (kbytes) unlimited
: : stack size (kbytes) 8192 cpu time
: (seconds)
: : unlimited
: : max user processes 256 pipe size (512
: bytes)
: : 8
: : open files 256 virtual memory
: (kbytes)
: : 2105343}Swap: {
: : procs memory swap io
: : system cpu
: : r b w swpd free buff cache si so bi bo
: in
: : cs us sy id
: : 0 0 0 40 9168 14632 56620 0 0 22 16
: 171
: : 64 4 2 94
: : [From vmstat]}Disk Mounts: { /dev/hda10 on /
: type
: : ext2 (rw)
: : none on /proc type proc (rw) /dev/hda8 on /boot
: type
: : ext2 (rw)
: : /dev/hdc on /mnt/cdrom type iso9660 (ro) [From
: : mount]}Disk Free: {
: : Filesystem 1024-blocks Used Available
: Capacity
: : Mounted on
: : /dev/hda10 1112004 253147 801403
: 24% /
: : /dev/hda8 21927 596 20199
: 3%
: : /boot
: : /dev/hdc 397472 397472 0
: 100%
: : /mnt/cdrom [From df -k]
: : }Environment: { HISTFILESIZE=1000 HISTSIZE=1000
: : HOME=/home/oracle
: : HOSTNAME=localhost.localdomain HOSTTYPE=i386
: : LD_LIBRARY_PATH=/u01/app/oracle/product/8.0.5/lib
: : LOGNAME=oracle
: : MAIL=/var/spool/mail/oracle
: : ORACLE_BASE=/u01/app/oracle
: : ORACLE_HOME=/u01/app/oracle/product/8.0.5
: : ORACLE_SID=ORC1 ORACLE_TERM=386x
: : ORA_NLS33=US7ASCII OSTYPE=Linux
PATH=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/u01/app/oracle/
: : product/8.0.5/bin:/bin:/usr/bin:/usr/local/bin
: : SHELL=/bin/sh SHLVL=2 TERM=linux
: TMPDIR=/var/tmp
: : USER=oracle _=/usr/bin/env}
: : System Tables: {}Semaphores: { ------ Shared
: Memory
: : Segments --------
: : key shmid owner perms bytes
: : nattch status
: : ------ Semaphore Arrays --------
: : key semid owner perms nsems
: : status
: : ------ Message Queues --------
: : key msqid owner perms used-bytes
: : messages
: : [From ipcs -sa] }Shared Mem: { ------
: Shared
: : Memory Segments --------
: : key shmid owner perms bytes
: : nattch status
: : ------ Semaphore Arrays --------
: : key semid owner perms nsems
: : status
: : ------ Message Queues --------
: : key msqid owner perms used-bytes
: : messages
: : [From ipcs -ma] }/etc/oratab: {}Tracing: { } :
null

How to install 11gR2 RAC on 64 bit linux OS

I am completely new to this topic of RAC and need to be installing and standing up RAC on Linux 64 bit OS . I have good knowledge of installing oracle database ENTERPRISE version 11gR2.
Can you guide me as to how to start. I am looking for leads. Probably we will have 2 nodes.
Thank you very much for helping me in advance

If you are a My Oracle Support (Metalink) user, go check out these two notes created by the Oracle RAC Assurance Team. They are excellent.
NOTE: 810394.1 RAC Assurance Support Team: RAC Starter Kit and Best Practices (Generic)
NOTE: 811306.1 RAC Assurance Support Team: RAC Starter Kit (Linux)
In the Linux note mentioned above there is a link to a Linux Step by Step Instruction Guide. This step by step instruction guide is the best start to finish document I've seen for how to set-up and install Oracle RAC. I believe the guide is written for installing release 11.2.0.2.

Help install Tuxedo 8.0 on RedHat Linux 7.2

Greetings,
I'm trying to install Tuxedo 8.0 on a RedHat Linux 7.2,
using the tuxedo80_linux.bin (from www.bea.com site) ,
and face the following problems :
. I dont' know what are the dependencies needed (I saw
JRE and installed it, but it don't seem to be the only thing
to do...)
. I don't know if this package will work on RedHat 7.x
(libc changed since 6.2, which is the 'reference' release for
Tuxedo 8...)
any links, tips, report of working on it ?
Is an RPM package exist (made by BEA or not) ?

alex wrote:
>
Input the command:
sh tuxedo80_linux.bin
then display:
preparing install....
and the installing stop.
Who can help me?:(Alex,
I believe that happens because Tux 8.0 was done for RH 6.2 which uses a
different version of glibc. If you're running RH 7.2 you need to install
the compat62 packages. The RPMs should be on the install CDs or available
from the RH site.
Once installed you need to set the appropriate environment variables as
shown below:
export LD_ASSUME_KERNEL=2.2.5
export LDEMULATION=elf_i386_glibc21 # This is so that when genclntsh runs
# ld, it first looks at
usr/i386-glibc21-linux/lib
# for libraries
export GCC_EXEC_PREFIX=/usr/i386-glibc21-linux/lib/gcc-lib/
# This is so that the gcc driver uses
# the compatibility compiler
After this the installer should work just fine. The problem, i think, was
that the JVM that came in the installation archive was compiled with the
old libgc and would barf unless you're running in compatibility mode.
You'll need to set these environment vars. when running Tux as well.
Hope this helps.
Regards,
Mitch

How to install d2k release 6i on redhat linux version 7.3?

Similar Messages

Maybe you are looking for