How to install data from an external sd card onto my tablet (a5500-f)

how to install data from an external sd card onto mt tablet (A5500-F).

Choose Computer from the Finder's Go menu, double-click the drive, and drag your documents back.
(111169)

Similar Messages

  • How do install Tiger from an external USB drive?

    I'm trying to upgrade from 10.2.8 to Tiger. How do I install Tiger from my external USB DVD drive? Tiger only comes on DVD and my G4 only has a CD ROM as an internal drive. Is there a way to boot from an external USB DVD drive?

    bamim2,
    you obviously just cracked some known hardware restrictions that not even Apple knew how to do: Don't start up from an external USB device.
    The procedure you described is the standard procedure for the startup manager. However, as Apple's article explains this does NOT work with USB-devices on PowerPC (G3, G4, G5) based Macs.

  • How to install Leopard from an external DVD reader?

    Hi,
    I've bought Leopard today. unfortunately, it's not yet installed on my PowerBook. As my SuperDrive is dead, I use now an external DVD (Lacie Portable DVD-RW), but it doesn't work. I can read the Leopard install DVD, but when it reboot, it reboot on my current installation.
    I've tried the following during the boot sequence:
    - alt pressed, but I can only see my main HDD
    - c pressed, but I boot on my current installation
    Can you tell me if it is possible to install Leopard from an external DVD, and how can I do that ?
    Thanks in advance.
    Regards,
    Emmanuel Di Pretoro

    Can you tell me if the same problem occur with a FireWire external DVD ?
    It does not occur on your model of Mac.
    (25504)

  • How to install Windows from an external cd-romd

    since my previous thread was pretty much ignored - i dare someone again:
    To all,
    I am not able to get Boot Camp to load vista from the external CD-ROM since the internal one is totaly disconnected. It does nothing. It spins the CD when it restarts then continues on to loading the login screen.
    Bare with me - this is the fun part -
    I got a 24" white iMac. CD-ROM was stuck and refused to take in new CD's. Took it to Apple, they replaced it. I bring it back home 2 days later and the screen is dented. They fix that in 4 days. Now I am finally able to start installing Vista.
    Put the CD in - nothing happens - it kicks it out!!!! Well - its brand new - its even a different brand than what was in there before.
    I take it back to apple, i give the lady all the ** in the world because this is not supposed to happen, etc.
    They decide to give me a new iMac. While I am waiting, the manager approaches me and give me the 13 cents which were found in the cd-rom drive (thanks to my kids)
    So I appologize - totaly ignored her wanting $450 to replace it, so I went and bought a Sony external DVD reader, burner.
    Problem --
    Boot Camp, Front Row + the DVD player software won't work off the external drive.
    I took the mac appart - disconnected the dvd-drive from the motherboard thinking that if its not there, then boot camp will attempt to run off the external drive.
    Put it back together - and rebooted - everything came up fine until using front row or the dvd player.
    Boot Camp still won't read the external drive - no errors nothing - it attempts then quits and moves to the login screen.
    Guys - I need help - i make my living off Windows so not having access to it - its killing me.
    Please do not recommend parallels or anything else like it.
    I am willing to try anything at this point. Before I go and spend $450 i will rather buy a new machine.
    HELP!!! Anyone Please!!!!

    OK, I reread your original post and you don't say if the Sony drive shows up in Finder if you insert a disc, it should.
    That said, the point I think you're missing is that when BootCamp Assistant (BA) asks you to insert the Windows disc, the BA application does not read it. Instead BA tells OS X to reboot off the cdrom drive. Thus it's the bootstrap loader that has to know how to read off the specified device. Bootstrap loaders reside in firmware and are very limited programs. They generally only know how to detect selected key presses and how to read boot sectors of certain devices and pass execution to the loaded code. Reading from a USB connected optical device is not within the scope of a bootstrap loader.

  • How do I put data from a external hard drive onto my mac

    I Had to wipe my hard drive in a apple store the other day, all data was placed onto an external hard drive.  But I do not know how to place it back onto my mac

    Choose Computer from the Finder's Go menu, double-click the drive, and drag your documents back.
    (111169)

  • How to retreive data from and external program

    Hiii
    I have a Zreport which produce an ALV and also the VF02 transaction which produce a amartform.
    I will need to
    1:  From a new program extract from the Zreport the alv in sort of excel sheet and submit it by mail
    2.  From a new program extract the smartfroms found on VF02 and submit it by mail
    please advise how i can get access to those two external program

    Hi,
    1: When you have an output in ALV why don't you use an EXCEL-Layou in this Report?
    2: Print the smartform and send this as email from the spool (lot of examples in SDN, serach for this).
    Regards, Dieter

  • How to recover data from an external hard drive that has lost half of the data I was storing in it

    I am using a Lacie external hard drive to store my photos on. Every once in awhile it disappears from my screen. I have been able to bring it back by unplugging and re-plugging from the computer. Then I had to turn it off and on again. Finally, it lost about half the stored photos, and I couldn't recover them. Does anybody have any suggestions as to what I might do to fix this problem?
    I'm using an iMac with  iOS 10.6.8
    The hard drive has 1 TB capacity

    You can try these.
    Data Recovery Programs
    Data Recovery – Best
    Data Recovery – Disk Drill
    Data Recovery – Data Rescue
    Data Recovery – File Salvage
    Data Recovery – Stellar Phoenix
    Data Recovery - uFlysoft

  • How to receive data from an external application

    In one of our requirements we would have to make use of the resume/suspend plug in Web Dynpro Abap. Would anyone happen to have any other information on this topic. Is there a sample program available which demonstrates the same?
    The requirement is that, I have to call an external window (output screen) from my present screen (input screen). While this external window is active, the calling window (input screen) should be disabled. When the external window (output screen) is closed the input screen should be enabled again. The external window returns a parameter list and this needs to be received by my application. I have read that suspend/resume plugs can be used for this. However, I have not been able to figure out how to use them.
    Additionally, is there any other approach for achieving the above functionality.

    Hello Hari,
    Refer these links for understanding the usage of suspend/resume plugs.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/68/3aee42c4257176e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/68/3aee42c4257176e10000000a1550b0/frameset.htm
    Bala

  • How to recover data from an External HDD partition crash?

    i was partitioning my external HDD into two partition with pre existing data on one portion to make a time maching on the other one. it crashed in the process and now i have lost 500gb of media. help

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • How to download data from a an external hard drive ?j

    How to download data from an external hd ?

    You need to copy the data onto your computer and transfer it via that (either via iTunes, or if the app that you want to transfer the data to supports, via wifi). Like the previous reply said, you can't do it directly without a computer being involved.

  • Uploading data from an external table with a where clause

    Hi,
    How do insert data from an external table in to a table already created in the database where person_id = person-_id on the external table?
    Example:
    External table
    XX_EXTERNAL_TBL (Person_id, emp_number, emp_name)
    Internal table
    XX_SQL_LOADER_TEST (Person_id, emp_number, emp_name)
    and person id already exists on the internal table (only want the last to columns to import where the person ids are the same)
    Thanks

    INSERT
      INTO XX_SQL_LOADER_TEST
      SELECT  *
        FROM  XX_EXTERNAL_TBL
        WHERE Person_id IN (
                            SELECT  Person_id
                              FROM  XX_SQL_LOADER_TEST
    /SY.

  • Install data from external hard drive?

    Hi, we have our old macbook data saved on external hard drive (old laptop had water damage but able to retrieve data). I now have new macbook, how do I install data from external hard drive to new macbook? Is it super easy? I didn't want to set up new laptop until I could understand how to install all our old data. Thanks

    Do you have the appropriate cable to connect the external drive to to new Macbook?
    If you do, the rest is easy. Connect the drive and start up the new Mac. The first steps in the setup will be to enter information about yourself, etc. etc. As you proceed you will be asked if you want to bring in data from another place. Just follow the directions, and the Mac Setup Assistant will do everything for you.
    The critical part is making sure the external is corectly connected to the new computer.

  • I transferred data from my external hard drive to my restored Mac Book Pro via migration assistant and now my external hard drive in time capsule has red minus signs. How do I get rid of that without getting rid of any of my data?

    I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?

    Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
    You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
    ..Step by Step to fix your Mac
    Another method is to copy the entire folder, then change it's permissions.

  • How can I remove all Time Machine data from an external HD, while retaining the other folders/files on the disk?

    I recently replaced my old Macbook Pro with a new Macbook Pro Retina.
    The original MBP had Time Machine set up on an external HD, and I also had some manually saved/backed up files (stuff that didn't need incremental backups; very old stuff) on the disk as well, in folders.  This worked fine and well for the life of the original MBP.
    When I set up the MBPr, I did not elect to transfer everything over from a Time Machine disk, as I wanted a Fresh Install; I chose to just re-download/install the apps  I needed from the App Store.  Much cleaner, more stable.  I updated to Yosemite immediately so, it gave me more of a  clean install.
    The problem is, Time Machine now won't read any Time Machine backups from that disk.  Migration assistant can pull data from it, but it's a bit wonky.  It was easier to just manually copy over what I needed.
    Now, I just want to "reset", and completely remove the old Time Machine data from the external hard drive, since it is completely useless to me now (I can't access it on this computer, and it's taking up space).  I want to remove the Time Machine data, as if it were never there, but keep my other folders/files that are on the disk (so, a format is not feasible).
    I will then set the disk up as a new, fresh Time Machine disk for the new MBPr. 
    What is the proper method for removing Time Machine data from an external disk (which doesn't seem to be associated with this machine anyway)?  I know a simple rm -rf will cause problems.
    Thanks for any help provided.

    See the yellow box in #12 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    Stop using the drive immediately, un plug it.
    Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

Maybe you are looking for

  • Error while transporting migrated contents

    Dear SDN, I had a requirement to transport the contents of Migrated Folder in Portal. I guess these contents have been migrated from EP5 to EP6. The contents in this folder are some standard SAP objects, i.e., iviews, pages, etc. The contents are wor

  • ERROR: You require permission from ************* to make changes...

    I've read the previous entries on this problem which describe changing ownership of the file/directory/whatever. I've done all of that and it seems to be correct because I show up in the <Properties> box as <Owner>. But the message I get about requir

  • Continues integration  with OS X Server and Xcode Bot

    I want to to do the continues integration using Xcode bots. I have installed OSX Mavericks and Server(version 3). Iam able to create bots using Xcode 5.0.1. While integrating it is successfully performing analysing testing but always the final integr

  • SolMan Charm: wbch and customizing TR not always automatically released

    Dear solman experts, In Charm, when users save a status linked to the background action "release_all" in order to release their transport requests, the transports are not always released. I know this could happen with ToC and also with TR (mostly for

  • How can i end the Process chain based on some condition

    HI All, I have a scenario where i have a main pc chain which call  the  new chain at the end which in turn again call pc1. So its more like a closed loop . pc1-->pc2->pc1 What main chain does is it reads some field value from a dso and assign that to