How to install datasource from R/3

Hii All,
Actually i m kind of new to BW.
we want to use one data source from R/3.Can anybody tell me how to recognize which is the correct datasource and its related infosource in BW.
we replicated the datasource from the source system(R/3).
but i am still not able to see all the data source from R/3. I know i am missing something.
Pls help.
Regards,
Viren.

Hi,
Try locating the new datasources in BW by RSA1->Modeling-> Source Systems-> Select your R3 system -> Right Click-> DataSource Overview -> Use "find" ( binocular) to find your datasource that you transferred from R3.
Hope this helps...
You may assign points if this was helpful ***
Will post more on how to identify the right datasource ***
Thanks,
Raj

Similar Messages

HT3546 I can't figure out how to install bonjour from the CD that came with my airport express. Can anyone help?

I can't figure out how to install bonjour from the CD that came with my airport. Can anyone help?

If you are having difficulties installing Bonjour from the Installation CD, you can download the latest version of Bonjour from here.

How to install leopard from a DMG file instead of DVD

How to install leopard from a DMG file instead of DVD, When i open this file, click restart, NOTHING happened!!!!!!

Use Disk Utility to restore the DMG to a blank partition, then use the Startup Disk preferences pane to reboot from that partition. Why not just install from the DVD, though?

How to install data from an external sd card onto my tablet (a5500-f)

how to install data from an external sd card onto mt tablet (A5500-F).

Choose Computer from the Finder's Go menu, double-click the drive, and drag your documents back.
(111169)

How to install software from imac to macbook pro

how to install software from imac to macbook pro

Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

How to install software from disk onto imac

how to install software from disk onto imac

Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

How do install program from external drive to mac book air

how do install program from external drive to mac book air

DVD or CD sharing: Using Remote Disc - Apple Support

How to Upgrade datasources from 3x to 7x versions

Hi Experts
How to Upgrade datasources from 3x to 7x versions.
I am planning to upgrade exisisting 3x data sources which are used in data loading are there any risks involved in upgrade
Thanks

Hi,
When you migrate a 3.x DataSource (R3TR ISFS) in an original system, the system generates a DataSource (R3TR RSDS) with a transport connection. The 3.x DataSource is deleted, along with the 3.x metadata object mapping (R3TR ISMP) and transfer structure (R3TR ISTS), which are dependent on it. If a PSA and InfoPackages (R3TR ISIP) already exist for the 3.x DataSource, they are transferred to the migrated DataSource, along with the requests that have already been loaded. After migration, only the specifications about how data is loaded into the PSA are used in the InfoPackage.
You can export the 3.x objects, 3.x DataSource, mapping and transfer structure during the migration so that these objects can be restored. The collected and serialized objects are stored in a local table (RSDSEXPORT).
You can now transport the migration into the target system.
When you import the transport into the target system in the after-import, the system migrates the 3.x DataSource (R3TR ISFS) (as long as it is available in the target system) to a local DataSource (R3TR RSDS), without exporting the objects that are to be deleted. The 3.x DataSource, mapping (R3TR ISMP) and transfer structure (R3TR ISTS) objects are deleted and the related InfoPackages are migrated. The data in the DataSource (R3TR RSDS) is transferred to the PSA.
Regards,
Suman

How do install Leopard from intel to ppc by Firewire?

Can anyone tell me how to install Leopard from my intel macbook to my older ppc? When I try to install from firewire it says that the drive is going to GUID and non-bootable. My DVD drive on the PPC isn't good enough for the Leopard DVD. Any suggestions are appreciated.

I'm not commenting on whether the type of Mac is compatible with the Leopard install.
I'll offer suggestion for the firewire install. The objective is to take the Leopard DVD and transfer in some way to a firewire drive to be able to boot a PPC Mac and complete a Leopard install to the PPC Mac.
How? Take a firewire external drive and partition it in two. One for your data and the other (7.2 gigs) max, for the ability to restore the Leopard DVD to that smaller partition. Once restored you'll be able to boot(using system startup control panel) and install Leopard to a PPC Mac.
The rule to follow is to use APM ie Apple Partition Map to boot PPC Macs. GUID mapping is for intel Macs. You use options within Disk Utility ti select which way to go. You cannot have both on one firewire hard drive. I use two firewire hard drives: one APM and the other GUID.
How to setup the small partition? Connect firewire drive to your PPC Mac. Open disk utility. Create your two partitions(remember when you do this the drive is formatted and all data is gone, so backup first). Remember to use option and select APM, although on a PPC Mac it should be by default and ditto if on an intel Mac for GUID. Once the partitioning is complete, select Restore and while using the left hand column(just read the instruction in the disk utility window) and assuming you now have the Leopard DVD on the desktop , drag the install OSX section from the left hand column to "source" and then drag the Leopard small partition from the left hand column to "destination." Wait 20 minutes and you are completed. Now you can boot from the firewire drive and install Leopard to a PPC Mac.

How do install Tiger from an external USB drive?

I'm trying to upgrade from 10.2.8 to Tiger. How do I install Tiger from my external USB DVD drive? Tiger only comes on DVD and my G4 only has a CD ROM as an internal drive. Is there a way to boot from an external USB DVD drive?

bamim2,
you obviously just cracked some known hardware restrictions that not even Apple knew how to do: Don't start up from an external USB device.
The procedure you described is the standard procedure for the startup manager. However, as Apple's article explains this does NOT work with USB-devices on PowerPC (G3, G4, G5) based Macs.

How to install Leopard from an external DVD reader?

Hi,
I've bought Leopard today. unfortunately, it's not yet installed on my PowerBook. As my SuperDrive is dead, I use now an external DVD (Lacie Portable DVD-RW), but it doesn't work. I can read the Leopard install DVD, but when it reboot, it reboot on my current installation.
I've tried the following during the boot sequence:
- alt pressed, but I can only see my main HDD
- c pressed, but I boot on my current installation
Can you tell me if it is possible to install Leopard from an external DVD, and how can I do that ?
Thanks in advance.
Regards,
Emmanuel Di Pretoro

Can you tell me if the same problem occur with a FireWire external DVD ?
It does not occur on your model of Mac.
(25504)

How to install packages from local folder

Hi all,
I have downloaded all arch linux packages from the following URLs:
ftp://mirrors.kernel.org/archlinux/core/os/i686/
ftp://mirrors.kernel.org/archlinux/extra/os/i686/
ftp://mirrors.kernel.org/archlinux/community/os/i686/
and then have saved them to an external hard disk. Then I have attached that external hard disk to my system and packages are available in following folders:
/mnt/external_hd/Arch_Linux/Core-OS/
/mnt/external_hd/Arch_Linux/Extra-OS-1/
/mnt/external_hd/Arch_Linux/Extra-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-1/
/mnt/external_hd/Arch_Linux/Community-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-3/
Now I want to install some or all packages from these folder with the help of pacman command. I am seeing that package corresponding to wvdial command is available in the /mnt/external_hd/Arch_Linux/Extra-OS-1/ folder. But how to use pacman command so that I can install wvdial package from that folder?
In addition to this if I want to install ALL Extra Packages available in the folders /mnt/external_hd/Arch_Linux/Extra-OS-1/ and /mnt/external_hd/Arch_Linux/Extra-OS-2/ then how to execute the pacman command?
Please send me step by step instructions so that I shall be able to install some or all downloaded packages.
I shall remain thankful for this forever.
Best Regards ...
Pankaj Kumar

Hi fukawi2,
Thanks for reply and searching for my username on google. It is true that I am a freelance s/w developer but I am not installing Arch Linux for any client. I am installing it due to some other reasons. In fact I started working on Red Hat and then on Fedora when I was a student of bachelor degree course in computer applications. Then later I searched open suse and started using it. I am using open suse from its 10.1 version. However the recent version of this distribution has become much resource consuming. So I am in the need of a light weight linux distribution. And I encountered Arch Linux. Then I purchased its installation disk from an online shop and installed it on my system. But only text mode is working at this moment. Since I want to use X window and so I started to follow the syntax of pacman command. But it is connecting to internet. Since my internet connection is slow (average speed of 10kbps) and so I requested the same online shop to download all packages from Arch Linux repository and send them to me. Therefore now I am having all those packages in my local external hard disk drive in the folder mentioned in my first post. Now I want to install packages from these folder. And so in order to get help I have come to this forum.
I have also followed the steps given on the pages https://wiki.archlinux.org/index.php/Pa … l_commands and https://wiki.archlinux.org/index.php/Pa … repository. But when I am trying to install a particular package using the following command:
pacman -U wvdial
then it is asking for a dependency. I know that the dependent package in my local folder but why it is not being automatically taken by pacman command? Can you please explain it.
That is why I am asking help only for customization and usages of pacman in order to install packages from local folder. But each member in this forum is only referring to long written manuals and not giving me exact solution which I think will involve four/five steps.
Best Regards ...
Pankaj Kumar

How to install fonts from CS3 into CS5?

At work I often need the font DIN which was installed with our version CS3. At home I have CS5 and I do not know how to install the needed fonts. I packed the relevant file with the fonts and other links into a directory but how can I install the fonts at my personal computer using Windows. When using a Mac it was quite easy to install the font, I just click at the font within the directory "fonts" and with another click on "install" I got the font. My PC however asks me which programme I want the file to open with - but which one should it be? It can't be Word, Photoshop, IrfanView or whatever. So what do I do? Can anybody please help me?

Well.. there are many different kinds of font files out there. Some of them advertise the type of font in the filename, e.g.
DINBold.otf
DINBold.ttf
DINBold.pfm
DIN.dfont
DIN.ttc
and so on.
Others, typically Mac fonts, don't have a file extension that tells us what kind of file it is. Of those Mac fonts, there's one kind that you can't use on Windows at all, because when you look at it in Windows the size is zero kilobytes. The fact that, at some point in the past, you moved a file from Mac to Windows without font problems does not make a platform-compatibility problem any more or less likely - perhaps it was all set in fonts you already had installed at home. The fact that right now it doesn't work in the Document Fonts folder makes me believe that you may have a Mac font resource fork problem - that's what would make the filesize 0k. If your fonts don't have file extensions (or if you have file extensions hidden by Windows, which is the way Win7 works by default) then you can't really know what kind of font file it is. Looking at the Properties of the font file will tell you, though.
Lastly: since you don't own an (extra) license for the font, you'd be ripping off the font developers by installing it on your home computer, although obviously not intentionally.

Trying to find out how to install plugins from Adobe exchange in my Indesign CS5

I click on the install button on the exchange website, then I get a window going to my plugin folder in Indesign CS5 but there is the selection button is gray out. Also I was asking if the upgrade from CS5 to CS5.5 is a free upgrade or you have to pay for it?
I wa also asking how to install the overlay creator panel into my CS5?

Right click on any track in iTunes and choose Get Info from the menu. In the window that opens choose the Info tab.

How to install fonts from net

How do you install fonts from the net as the windows installer will only install them onto Word and I want them in PSE10

>windows installer
1-Windows puts fonts in a common fonts folder... which makes the fonts available to ALL software... at least if they are "correct" fonts (such as TrueType)
2-for Windows help search at http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

How to install datasource from R/3

Similar Messages

Maybe you are looking for