How to install developer Suite 10g on linux 9

i am trying to install developer suite 10g on linux 9 ... but i am unable to it.please suggest

Hi,
Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
regards

Similar Messages

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

Installation of Developer Suite 10g in Linux

Hi,
I've done the configuration of Developer Suite 10g on Windows OS. But i want to know how can i configure the Developer Suite 10g in Linux platform.
Any link for this would help me a lot.
I have done some configuration, but i'm facing some problems with it. Like i've compiled the form in windows version, but when i try to compile the form in
linux, i'm facing the problems. In the form there are some libraries attached to it. When compiled in Windows, it got compiled successfully, but when i compile it
in Linux, it is unable to find the procedures and function in the libraries. To come out of this situation, i've placed all the libraries and the forms in a single folder. still
the problem exists. It is giving an error saying that the Invalid identifier, whereever i've mentioned the procedures/functions of libraries. Even in windows, i've all
the forms and libraries in the same folder.
Regards,
Alok Dubey

First of all which Linux....????I am successful in installing it. It is Redhat Linux 5.0 Enterprise edition. But i'm facing the problem in configuring it.
I checked out from Oracle web site, this linux version supports the Developer Suite 10g. If u can send me any document
or any link which u felt that it is very useful, then Please let me know.
Have you checked if it is registered with DevSuite10g...???How to check this ..
"I have done some configuration.."
Which....????
I've set the forms path so that i can run the forms using the url in the browser. But i feel that my configuration is incomplete. As i've mentioned already that when my form is
compiled in the windows, it is getting compiled. But when i compile in linux, it is showing the error like Invalid Identifier. Here the Identifier name it is dispalying is the name of function(Which
is in the attached library).
Regards,
Alok Dubey
Edited by: user583531 on Oct 23, 2008 4:06 PM

Install developer suite 10g on windows 7

hi to all,
I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

To install developer suite 10g wondows2003

hi to all,
I would like to install developer suite 10g on my notebook windows2003 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Error Installing Developer suite 10g in windows 7

hi everyone,
I hve installed oracle 11g R.2 in my machine, now when i try to install oracle developer suite 10g directly using setup.exe it becomes not responding. I hve changed the compatibility mode, since getting the same. So i tried with oracle universal installer 11g but it shows an error and stops installing
error :
some components in the stage area have stage version less than 10.2.0.0.0. please ensure that all the components have their stage version greater than or equal to 10.2.0.0.0.
Pls help me to install this. I need oracle forms and reports.
Thanks for the reply.

Hi,
Please refer links below:
http://windows7bugs.wordpress.com/2010/02/18/install-oracle-10g-onward-database-developer-on-windows-7/
How to Install Oracle 10g in Windows 7 Home premium 64bit operating system
Hope this helps :)
thanks,
X A H E E R

Installing Developer Suite 10g R2 on Windows Vista failed !!

It seems Oracle has a new challenge of producing a new edition of Developer Suite that will install on Windows newest falvour, Vista. I installed Oracle db 11g on my Vista O.S. and everything runs normally. But my Developer Suite 10g R2 failed to launch setup.exe, giving me the following error:
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2007-11-16_06-40-54PM.log
Please press Enter to exit...
Any idea to solve the problem? Or it's all that I have to wait Oracle for an 11g Developer Suite version that is supported by Vista??!
Thanks!

Either your tnsnames.ora file that Forms is using is not set up properly to connect to your database, or else you need to install the Microsoft Loopback Adapter.
I have set up laptops with a Loopback Adapter, so Forms will connect regardless of the Windows computer name. If the computer name is included in the tnsnames entry for your on-board database, then you probably don't need it.
When you installed the 11g database, the installation set up a tnsnames.ora file with an entry for that database. First, try copying the entry into the corresponding tnsnames.ora file used by Forms.
In my system, I have four distinct tnsnames.ora files, each one is a duplicate of the others. Whenever I need to change an entry, I do it in one of them, then do a Save As three times to replace the other three. I use these comment lines at the top of the file to help me:
#-- For reference, save as: C:\oracle\tnsnames___ref.ora
#-- For Forms6i,   save as: C:\oracle\orant\NET80\admin\tnsnames.ora
#-- For Forms10,   save as: C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
#-- For SQL Plus10,save as: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.oraWithin the laptop running withOUT the loopback adapter, this is the entry for the on-board Oracle 10 database:
#-- Laptop           Could use: (HOST = Steve-PC) / 127.0.0.1
ORCL =          (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)
                                  (HOST = 127.0.0.1)
                                  (PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)
                          (SERVICE_NAME = orcl) ) )Note the replacement of the HOST entry from the Windows computer name with the generic IP address for the local platform.

Error installing Developer suite 10g

Hello,i have downloaded the oracle developer suite 10g 10.1.2.0.2
i get this error whenever i try to start the setup program :
Error in writing to directory C:\Documents And settings\<MY_CURRENT_USER>\Local Settings\TEMP\OraInstall...
please ensure that this directory is writable and has at least 55 MB of disk space
Installation cannot continue
i can see there is a OraInstall<time> directory with a size of app. 50 MB created under my local Documents and Settings\<MY_CURRENT_USER>\LOCAL~1\TEMP
Im using Windows XP sp2, and i have 10g Database Release 1 installed.
i've tried with another account on another similar XP station ( same configuration on both machines ) and i got the same error.
Any help is appreciated.
Thank you

Hi,
Do you have Admin access to the PC? Have you tried using a different TEMP directory?
Rod West

Installing Developer Suite 10g for Windows

As part of a prototype test for upgrading to 10g we have installed Oracle 9i database onto a Windows XP PC and are now trying to install the developer suite 10g.
The ORACLE_HOME directory for the DB is D:\Oracle\ora92.
The Oracle Uinversal Installer defaults to this directory for Oracle Home when we try to install the 10g software, but we then get the following error:
Dependencies
Oracle Developer SUite 10g cannot be installed into an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home.
Could you advise please.

Yes, and got the message - install has encountered an error while attempting to verify your virtual memory settings....
We have changed the paging size for the D: drive where we were trying to load to - and it has loaded OK now thanks.

How to install developer suite on windows vista

trying to install the dveloper suite on windows vista, keep gettting error that the pagefile(swap file) size is 0 and need to fix this problem.
did any one have this problem
using developer suite x86-101202 (compatibility mode xp sp2)

Have you followed the steps under "III. After the install completed" in this thread?
Forms 10g installed and running on Windows Vista
And note the fourth paragraph from the top. There is a BIG bug in Forms Builder 10g running on Vista. When you try to compile a program unit (procedure) that calls another one that has compiler errors, the Forms Builder crashes. So it can be pretty frustrating if you actually try do any forms development work.

How to install Developer Suite 6i on Cent OS

i need oracle developer suite 6i to run graphics on oracle application server but i cannot install devsuite6i.
i downloaded d2k6irelease2.tar from oracle site. help me to install it on CentOS
i tried:
1. extract .tar into folder
2. yum install FolderName
[root@ServerName DevSuite6i]# yum install DevSuite6i
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
No Match for argument: graphics60/
Nothing to do

Hi,
Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
regards

How to Run Developer Suit Form 10g

my question is
how to run form in developer suit i was using developer 6I now i want to run my module to developer suit 10g first i install developer suit 10g then database 10g and make a simple module of emp table
now when i run its give me error The HTTP Listner is not runing
i start OC4J Instance then again i run the form its run and install
Jinitator 1.3.1.22
then its give me again error
ORA-12560 Tns protocol adopter failure
i check my firewall setting its check all program and service excluding Remote disktop
I check my TNSNAMES.ORA file its look like
# tnsnames.ora Network Configuration File: d:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
uid=shah;pwd=a;
i save my module in D:\module1.fmb so there is no space in folder
but still i am facing the same error
i not one thing that i connect with just my user id and password and left blank in database
Just like
USERID = SCOTT
PASS = TIGER
DATABASE =
Any one know how to solve this problem
Thanks
Shahzaib ismail
Developer Suit 10g, Database 10g, OS Window XP

well when i connect with my database i right
username = Scott
password = tiger
and i left blank in database row
because when i insert orcl in database row its give me error
TNS No listener
i search listener.ora file and i found in
d:\devsuit_home1\network\admil
*# listener.ora Network Configuration File: d:\DevSuiteHome_1\NETWORK\ADMIN\listener.ora*
*# Generated by Oracle configuration tools.*
SID_LIST_SERVER =
*(SID_LIST =*
*(SID_DESC =*
*(GLOBAL_DBNAME = Oracle8)*
*(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)*
*(SID_NAME = ORCL)*
*(SID_DESC =*
*(GLOBAL_DBNAME = orcl)*
*(PROGRAM = orcl)*
*(SID_NAME = orcl)*
*(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)*
*(SID_DESC =*
*(GLOBAL_DBNAME = orcl)*
*(PROGRAM = orcl)*
*(SID_NAME = orcl)*
*(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)*
SERVER =
*(DESCRIPTION =*
*(ADDRESS = (PROTOCOL = TCP)(HOST = SERVER)(PORT = 1521)(SEND_BUF_SIZE = 1521)(RECV_BUF_SIZE = 1521))*
LOGGING_SERVER = OFF
SAVE_CONFIG_ON_STOP_SERVER = TRUE
what can i do now ?

Are BI Beans already installed with Developer Suite 10g R2?

I wish to use BI Beans in Forms Builder 10g R2. Do I have to download the BI Beans separately or it has already been included when I install Developer Suite 10g R2? Thanks.

If you are planning to use Forms against a relational data source then you will only be able to use the BI Graph bean as part of your development. The graph bean is automatically shipped with JDeveloper and there is no need to install BI Beans.
There are lots of examples of how to use the graph bean with relational data sources and these can be found on the following sites:
OTN Reports Home Page - Links to the FAQ on graphing
BI Blog - posting on how to use the graph bean
BI10gR2 samples - contains a JSP example of how to use the graph bean with a relational and XML data source.
Forms does not support multi-dimensional data sources so there is no way to use the other BI Beans components such as query builder, calculation builder, crosstab beans unless you are using a multi-dimensional data source which requires use of Oracle OLAP (preferably 10gR2).
What do you want to build with BI Beans?
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Installation of developer suit 10g on windows 7 64-bit

Dear all,
I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
Please help

I am guessing that you are fairly new to the Oracle Forms product as you are not understanding the difference between the environment where a "form" is developed and the area where it can/will be run in a supported manner. Let me try to start from the beginning....
1. The Forms Builder 10.1.2 is NOT_ supported to be installed on Windows 7. I can technically be accomplished but is considered NOT supported by Oracle. So unless you have a good working knowledge of the Developer Suite product and the Win7 operating system and don't care about getting technical support from Oracle, I do not recommend attemting to install on Win7. If you choose to install on Win7, you are on your own even if you have a Support agreement. Supported platforms include Windows 2000, Win-XP, Vista (see note 559067.1), Solaris, Linux
If you feel like you need to have the Builder installed in an UNSUPPORTED environment, you can probably follow the instructions provided for installing on Vista as they will likely work for Win7. If you have access to My Oracle Support, take a look at this document: How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1)
Supported Operating Systems and other installation information can be found in the Installation Guide:
http://download.oracle.com/docs/cd/B25016_08/doc/dl/core/B16012_04/chap2.htm#i1007814
The only exception to the above is that we now support installing on Vista when following the note mentioned above.
2. You can "run" your form after it has been designed and compiled, on a Windows 7 machine. The form will run in a browser, using a JRE/JPI.

Connectivity and Installation Problem in Developer suite 10g

Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
6. There is no middle tier in this case. Only One server as domain
and client pcs.
Please guide me,matter urgent.
Thanks in advance

Regarding this point -
1.
Then you should be able, for testing purposes, to do the same from other Clients.
Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
2.
For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
(We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
Please explain the steps to proceed .
thank you

How to install developer Suite 10g on linux 9

Similar Messages

Maybe you are looking for