How to install downloaded forms 6i for solaris

I downloaded from OTN 6isolaris.tar and extracted it expecting to see product.jar and such, so I can install developer6i for soalris. What I did see is, what the oracle home directory should look like post-install.
Anybody know how to relink this "image" cos I am stymied and the documentation on the download page is "extensive" if you have cd.
Sunir

got the answer.... the wonderful character installer...

Similar Messages

Where to download and how to install X Window System for Oracle Linux 5 ?

Folks,
Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
But I don't know where to download and how to install X Window System for Oracle Linux 5.
Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

You can address the problem in a number of different ways.
You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

How can I install Oracle Database 10g for Solaries (SPARC) from the console

Dear Forum Members,
In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
If yes. Then How?
If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
Thanks
Aungshuman Paul

There are 2 possible ways to accomplish this.
First,
Silent installation
http://www.informit.com/articles/article.asp?p=174771&rl=1
Second, (cut/paste from other site)
How to install Oracle software remotely?
Remote Software Installation Steps: (For Solaris only)
If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
1. Pick your source server or machine for remote installation.
2. Check that your CD is in your source CD-ROM drive.
3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
4. On the source machine, login as a user.
5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
6. Become root user by typing: su (dont use -)
7. Check that Volume Manger is running. # ps ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
8. If not then do the following: # mkdir p /cdrom/your-cd-file-name
9. # mount F hsfs r cdrom-device /cdrom/your-cd-file-name
10. Add the following line to your /etc/dfs/dfstab file: # share F nfs o ro /cdrom/your-cd-file-name
11. Verify whether your source machine is an NFS server: # ps ef | grep nfsd
12. If you see an entry that contains /use/lib/nfs/nfsd a 16, then nfsd is running and skip to Step 16.
13. If nfsd is running, then type: # /usr/sbin/shareall
14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
15. Verify whether your source machine is an NFS server again by typing: # ps ef | grep nfsd
16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
17. Now, log in to the target machine by type: # rlogin target-machine-name l user (not root)
18. Then log in as the root user by typing: # su
19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
21. # mkdir /remote_products
22. # /usr/sbin/mount F nfs r source-machine:/cdrom/your-cd-file-name /remote_products
23. # cd /remote_products
24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

I downloaded form filler for firefox but can't find it and don't know how to use it?

I downloaded form filler for firefox but can't find it and don't know how to use it?

This doesn't sound like a Firefox problem. You should try to consider, methodically, what you did before the problem occurred so that you can describe to someone exactly what occurred, and in what order.

How to install oracle Forms and Report 10g in windows XP OS

How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
Rajeev

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

How to install 10g Forms and reports in Unix

Hi All,
How to install 10g Forms and reports in Unix, do we need to install 10g AS then desktop forms and reports, Any metalink documents for reference .
Thanks

Is it really so hard for you to find the installation guide?
http://download.oracle.com/docs/cd/B25016_08//doc/dl/core/B16012_04/toc.htm
For the Developer Suite you don't need the App Server. You need the App Server for production.
Edited by: InoL on Jul 19, 2010 1:22 PM

How do I download camera raw for nikon D800

How do I download camera raw for nikon D800

You need to download and install ACR 6.7, which will work with CS5 and with your D800. ACR 7.1 only works with Photoshop CS6.
M

How to install a network print on solaris 10

How to install a network print on solaris 10?
Thank You!

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg ‏27 KB

Hello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
    1- Deutsch
   ->2- English
    3- Español
    4- Français
    5- Italiano
    6- Nederlands
    7- Português (Brasil)
    8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much

How to install mdk in nwds for creating mobile applications

Hi experts,
how to install mdk in nwds for creating mobile applications?
reward points for appropriate answer.
Thank you,
G.V.K.Prasd

HI,
MDK is already integrated in NWDS. Separate MDK download is only necessary in case you want to use Eclipse as single DEV environmant without the full blown NWDS orwant to develop for earlier versions like MI7.0.
So very important: separate MDK does only support MI7.0 and earlier versions. If this is your intention, simply download MDK plugin, extract the folder, have a look into the download subfolder and you see the ECLIPSEPLUGIN.ZIP file in there. Unzip this as well and then put the related stuff into the FEATURES and the PLUGINS folder of Eclipse. After restarting Eclipse open the settings and add the buttons to the view and configure the correct settings for your system. This is the normal stuff like for every Eclipse plugin. Not 100% sure if this is not included in NWDS as well already.
If you are not sure about PLUGINS and FEATURES stuff and the configuration - the MDK itself has a great documentation that shows the steps you need to follow.
Regards,
Oliver

Downloading 9i db for Solaris

Trying to download 9i db for Solaris, I get an error whenever I try to select one of the files.
Server: http://download-uk.oracle.com/otn/solaris/oracle9i64/Solaris64_9011_Disk1.cpio.gz
File: Any of the 9i for 64 bit Solaris files
Date: 22/4/2002
Time: From 10am (BST) to 15:00 (BST)
Browser: MS IE 6
OS: MS NT 4 SP6
Error: 10053 - Software caused connection to abort

I had/have the same problem. If you run the install in the custom mode, you should be able to install the database configuration assistant. The problem of the message box asking for a password still exists for me however.
Does anyone else know the fix/password for the message box?
thanks

How to install knowledge base file for oracle text

how to install knowledge base file for oracle text?
there are couple of files droldUS.dat,.. which are required to generate gists and themes, where can i find them or install them.
please help!

I checked the download page and it says:
"All Release 2 download pages contain Oracle Companion, Client, Clusterware, Gateways, and Application Express standalone downloads"
so you should already have it. Try searching for the filename that was in your error message.

How should I download iOS 8 for my iPhone 5s?

How should I download iOS 8 for my iPhone 5s?

If you typically sync your iPhone to a Computer with iTunes than that would be a good first place to start. As you would know, once your iPhone is connected via the lightning / USB cable to the Computer and iTunes is open you can click on the box that says "iPhone" and you will go to the Summary page on the computer screen and it will say that iOS 8 is available. Just click to Update. After a few seconds it should give you an estimated time to complete the Download (but not the time of the complete install process). Alternately you could just go on your iPhone 5s to Settings>General>Software Update and see if it says iOS 8 is Available to Install. Click to Update and just set the iPhone down in front of you and watch as it goes through the process. Either way should work fine.

How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1?

How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1? I go to the right place on the Brother website and instead of downloading a driver it says there is a problem. Also something I did download and stuff on the CD provided with the printer is for a PC not a MAc. Help please.

OK, connecting a Wi-Fi printer is a 2 step process.
Connect printer to your network
Have computer to "see" printer on the network.
Follow Apple's steps for connecting a Wi-Fi printer in Printing in OS X. Read the article in it's entirety before installing.

How to install adobe forms

Hi Experts.
Kinldy tell me how to install adobe forms ...

Hi
Just follow these links.
https://www.sdn.sap.com/irj/sdn/adobe
http://help.sap.com/saphelp_nw70/helpdata/EN/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm
Hope this will help you.
Regards:'
Alok

How to install downloaded forms 6i for solaris

Similar Messages

Maybe you are looking for