How to install driver for Intel Pro 1000 PCI Network-card

Hello,
I just bought the a.m. Intel Pro 1000 Network adapter, but I don't know at all how to install the driver for Solaris 10.
The installation instructions delivered from Intel didn't help me at all, because I can't uncompress the INTCGigae.pkg and the INTCGigaE.tar.z files.
I copied them to /tmp and folllowed Intel's Installlation Instructions.
Please keep in mind I am new to Solaris 10, with no Linux/Unix experience, when helping me.
Thanks in advance for help and assistance.

Hi!
And what happens if you install the driver from the Toshiba WLAN portal:
http://aps2.toshiba-tro.de/wlan
I still dont know what you mean with Askey for Toshiba
You should try to install the driver manually. Choose in device manager the WLAN card, right click and select Update Driver. Choose the advanced installation where you can choose the driver directory yourself and navigate to the folder where you have stored the downloaded driver.

Similar Messages

How to install driver for Intel HD on Satellite C660-22V?

Hi
I could not reply below so here is my question.
http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=68240
As*** I do not know if you work for toshiba but what else am I suppose to do if the driver installed on a new laptop does not allow me to use my software?
The software is ArcGIS and would be widely used.
Seems like it has been 2 years since the driver was updated by Toshiba so what good is that?
I would expect the laptop to work out of the box as the specs met the system requirements for the software.
Will there be an update in the future?

Hi
This seems to be a user to user forum so would not expect to get answers from Toshiba here
> Seems like it has been 2 years since the driver was updated by Toshiba so what good is that?
> I would expect the laptop to work out of the box as the specs met the system requirements for the software.
Where is a problem? The Satellite C660-22V supports Intel graphic card.
Visit the Intel page to get the latest graphic card driver.
If you would not be able to install this using the install.exe, go to device manager and install/update the graphic card driver via device manager
Use the advanced install option to point to the driver folder containing the latest driver files thats it

P35 Platinum - Intel PRO 1000 MT Network Adapter problem

Greetings.
Found out very strage thing - installation of "Intel PRO 1000 MT Network Adapter" in any PCI slot disabled onboard Intel raid controller! :(
If this card installed Intel Matrix Storage Manager screen do not appear in boot process and Raid do not listed in Boot Sequence bios options, instead
I can see Network Adapter in this list. I tryed "Boot from othe devices" option, bus it not work too.
So with this adapter installed I'm not able to boot from raid.
Currently I use bios version 1.4
Any idea how to solve this?
P.S. Installation of old 3COM 3C905CX-TX-M Adapter did not have such effect, but there is no Win x64 drivers for it.

Hi Maesus,
Thanks, I did and filled information about my computer configuration.
Hope it'll help solve the problem.
AaronYuri, thans go reply.
But maybe it's some misundestanding - when I say that installation of Intel adapter in PCI slot "disabled onboard Intel raid controllr" it does not mean that raid controller disabled in bios settings - settings in "Integrated Peripherals->On-chip ATA devices" are the same (PCI IDE BusMaster = Enabled, Raid mode = RAID), but it's looks like bios "did not see" raid controller - it disappers from list of devices to boot from and I did not see screen of Intel Matrix in boot proces (this screen alwais presents if controller switched in raid mode)

How to Install Solaris for Intel so that it boots off from a boot floppy?

Hi all,
Sorry to bother you with this one (I went through all documentations/manuals and could not find straight answers to following
specific questions):
I have one hard drive with 1st partition used by Windows XP and a second partition that's a blank FAT 32 (using Partition Magic)
I want to use for Solaris for Intel.
My very specific questions:
(1)That blank Fat32 partition: can I run the Solaris install over it ..or should I absolutely make sure that it's a blank UFS formatted
partition? I am asking you that because all manuals (except one) pretend that I can run my Solaris install on a blank Fat partition...
but I believe that documentation at multiboot.solaris-x86.org stresses that if the partition is not a blank UFS one, it wont install Solaris
(2)As you already know, some Oses like Linux or FreeBSD can be installed on a partition and be booted off a boot floppy.
So without that boot floppy, no trace of the OS. How can I do that with Solaris for Intel. I want my Solaris to boot off a boot floppy only.
BTW, I currently have Solaris 7 for Intel.
Thanks for the answers.

(1)That blank Fat32 partition: can I run the Solaris install over it ..or should I absolutely make sure that it's a blank UFS formatted You can install Solaris to that blank FAT32 drive but Solaris WILL convert it to UFS BEFORE doing the install. In other words, after the install it will be UFS and not FAT32 anymore.
So without that boot floppy, no trace of the OS. How can I do that with Solaris for Intel. I want my Solaris to boot off a boot floppy only.Not that I know of. Some people have reported booting Solaris off of a USB drive though.
alan

How to install driver for Windows 8.1 without physical connection

I have a Photosmart 7762 printer connected to a NAS box (with wiring all very difficult to get to behind various office units) and want to be able to print to it from a new Windows 8.1 PC that is installed (again with difficult to get to wiring) in a separate room but on the same network.
The HP site for the printer says I have to use Windows Update to get the driver, but this only works if you physically connect the printer to the PC which isn't an easy thing to do in this case.
Does anyone know where I can get hold of the driver so I can use the "Have Disk" option? I have been unable to find it anywhere. Alternatively, does anyone know how to copy the driver from an existing Windows 7 install (on a laptop I could connect it to) and whether that would work?
This question was solved.
View Solution.

Hi,
Folow the steps listed under Download the driver for later use or use on another computer below, it will allow downloading the INF and installing those manually, be sure to follow the link to Microsoft which explain how to locate the correct package and extract it:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03470332&DocLang=en&docLocale=en_US&...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install driver for HP photosmart 7520 on MacOSX 10.5.8???

My husband does basic printing of documents. His computer is a MAC OSX 10.5.8. We have a new HP Photosmart 7520 printer which requires 10.6 minimum.
Is it possible to get a driver for this printer for him, that will allow him to access the printer, without getting a new computer!! ?? To simply be able to print and fax and scan.. he rarely does photos.
Please Help, as of course, he is quite frustrated, and as a result, so am I!!
Thanks.

Hi grammaglenys,
Welcome to the HP Forums! I see that you having trouble installing drivers with your printer. It is true that this printer only supports Mac OS X 10.6 as the minimum requirement for the HP Photosmart 7520.
As the Operating System is older than when the printer came out, there currently isn't a driver available. However, here is a list of printers that can be used with Mac OS X 10.5.8. Archived - Mac OS X 10.5.3: Printer drivers included in the HP Printer Driver Update v1.1.1. Or you can try upgrading the Operating System to Mac OS X 10.6.
Hope this answers your question, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Missing files on installing driver for Sound Blaster Adio PCI 64v on win 9

I've downloaded and run the file 373UP.exe. Then I got the message: Missing file eapci4m.ecw. So, I can't install the driver!!!
Wher can I find this file?
With tanks.
P.S. I li've in Belgium, I'm dutch speaking and I bought in 999 a pentium 2 computer of Packard-Bell. Now I've installed win 98 SE and I needed the driver for my sound card!

jorisvh,
This knowledgebase case should cover how to load the wavesets (*.ecw).
Cat

Solaris 10 x86 (6/06) doesn't recognize Intel PRO 1000 PCI Express Gigabit

Hi dear all!
Have problem with onboard Intel Dual port ( Intel 82563EB ) Gigabit Controller on supermicro 5000P(Blackford) chipset's board
X7DB8R-8 under Solaris 10 x86 6/06.
Solaris 10 doesn't recognize this onboard controllers.
And drivers on Intel & Sun web sites aren't available.
In what way can I make work these onboard network cards under Solaris 10?
Thanks all in advance who responds.

HI Sam,
No at this time, i haven't issue for this problème.
But, i try intel card soon with a mac pro.
The xserve detecte the card, but not recognize the drivers for it.
maybe one day, i have good new.
Manuel

How to install driver for canoscan 9900F with Mac OS 10.6

I have been looking for 18 months for driver to use for canoscan 9900F with MAC OS X. Neither canon or apple supported their compatibility
Now a bulletin came out on 4/14 http://support.apple.com/kb/ht3669
This lists canoscan 9900F as supported by snowleopard
I tried to add scanner but it did not find it
I downloaded and opened driver from canon but it still doesn't recognize it, when I go to system preferences and select print fax and select add printer.
Pleas help... Thank you

Read this about Mac setup.... http://support.hp.com/us-en/document/c04510394/

Network card: e1000g (Intel PRO/1000 MT) did not working properly

Hi to everyone!
I'm having some strange trouble.
All computers attached to one DLink gigabit switch
Server #1:
nf4-based motherboard, Intel PRO/1000 MT net card, onboard net card (forcedeth driver used) Ubuntu Linux 2.6.25 kernel version.
All just working.
Server #2:
nf6-based motherboard, same Intel net card, SunOS 5.11 snv_86.
All just working.
Server #3:
Same as server's #1 nf4-based motherboard. Same onboard card. Same SunOS 5.11 snv_86 as server #2 have installed.
Its work. BUT..
Intel card is not working as expected.
It is seen by system. It is properly up and running. It is sending packent and receiving packets. Ierrs=Oerrs=Collis=Queue=0.
But thru e1000g0 interface no one computer can reach this one, and from server #3 no one computer is seen thru e1000g0. Exept...
Except two old Sunray1 devices (attached to the same switch for testing purposes)! But even these devices seen only by arp requests, and is not pingable.
It is some mistery, but if I turn on jubmo frames, these rays got a picture from SRSS, testing on this sevrer! Not for long, heh, they hung up fast, but this is proof a physical connection :)
So, I can not disable onboard network card on Server #3 - server becoming unreachable :(
I know, those network cards must work on Solaris - as they did it on server #2. I know, those network cards work with my nf4-based motherboards - as they did it on server #1.
But I can't uderstand, whait is going on with e1000g driver on server #3!
P.S. Kernel driver e1000g settings are the same. All difference from servers #2 and #3 is: #2 had Intel netcard installed then Solaris was setting up, and #3 had Intel netcard installed later. All netcards are working (I trying to swap them from one computer to another - did not change anything).

*) #3 thinks it is sending, but a NIC/driver error prevents it.NIC is fully health. It is tested on another PC. Driver error - or driver's bad implementation - is the one I'm thinking.
*) #3 has a bad transmit pair of wires (would affect all communication)This patchcord works w/o problems on other PCs and even on onboard NIC of server #3.
*) Network problemsHeh :)
*) Firewall or other device is dropping the ARP repliesIt is some very stealthy and very selective firewall, affecting only external NICs :)
BTW, then cord is attached to NIC, it sends "who has this IP" requests, asking to be shure there will not be an IP conflict. No one seen this requests.
*) #1 has a NIC/driver error preventing it from seeing the reply.Only for send from #3? It is like a firewall on #3 :) And, there is more PCs, not only #1-#3. No one can see #3's replays (or asks), not only #1..
I'm repeating: this PC works in network now on onboard NIC w/o problems. But onboard NIC is only 100 Mb/s, and we need 1 Gb/s.
I was thinking, Solaris took wrong MAC for NICs - but not, ifconfig shows the same MACs as marked on NICs.
Even more, yesterday i plumbed e1000g1 - second Intel NIC in server #3. And I was surprised - it worked perfectly!
But I make "touch /reconfigure; init 6" - and after reboot, no one of two Intel NICs working again :( They both have the same behavior - no one can see packets they sends.)
I even try to restrict connection on 100 Mb/s by driver's .conf modify - it works, link become yellow instead of green (take a note, NIC is able to "speak" properly with switch!), but all other stay the same.
Strange, really strange behavior. More strange is a fact this NICs work on another instance of same SunOS, but on different motherboard, while the same MB with same NIC is working w/o problems under Ubuntu. Looks like some bug in Solaris driver.

How to download wifi driver for macbook pro?

Hi, how to download wifi driver for macbook pro?

Apple hardware drivers are an integral part of OS X and cannot be removed through normal means.
Why do you believe it's necessary to download a driver?

Install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite

install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite V 10.10.1 (I have the disk but it doesn't load the driver)

Hi @Peggysguy ,
I see that you are having issues installing the printer on Yosemite. I will certainly do my best to help you.
The CD won't support Yosemite. You just need the newest drivers to install.
I have provided you with the downloaded Full Software drivers for the Laserjet Pro CP1525nw.
HP LaserJet Professional CP1525 Color Printer Series Full Software Solution.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Please Help: Intel Pro 1000 NIC not detected by Solaris 10

Hi there,
I just installed Solaris 10 in my Dell Dimension 8400 w/ an Intel Pro 1000 Gigabit on-board NIC. However, the network doesn't work. I checked "ifconfig -a" and only lo0 showed up. Anybody can give me any instruction to make it work? I guess I need to install the driver (e1000g?) first.
I'm totally new for Solaris... (I used Fedora Linux for a while though). Thanks a lot for you help!
Z.

Hi there,
I just installed Solaris 10 in my Dell Dimension 8400 w/ an Intel Pro 1000 Gigabit on-board NIC. However, the network doesn't work. I checked "ifconfig -a" and only lo0 showed up. Anybody can give me any instruction to make it work? I guess I need to install the driver (e1000g?) first.
I'm totally new for Solaris... (I used Fedora Linux for a while though). Thanks a lot for you help!
Z.

Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

Greetings to all!
Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
Would be glad to realize how to solve this... Thanks a lot.
Satellite A100-599
Current OS: Windpws Vista Home premium sp1.
Message was edited by: Airtoground

I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
Contents and Installation order
for Windows VISTA
Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
- SLP Module OEMSLP2.0
- Sun Java 2 Runtime Environment v1.6.0
1 KB928190(For updated USBHub.sys) KB928190
2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
*5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
I found this driver but it says "no suitable driver found, installation wizard stops its work".
Any ideas what could it mean?
Thanks to all.

Lenovo/IBM 8113-d5u + Intel 945 + Intell Pro 1000 PM

We recently received some boxes from Lenovo part number 8113-d5u. They use
the Intell 945 chipset and have an integrated Intel Pro 1000 PM on a PCIE bus.
When we PXE boot it fails to find drivers for ethernet. This happens
during the loading of linux.2. We added e1000.ko to the list of drivers to
load in /etc/nwdriverList but this does not work.
Error message on PXE boot is:
"Unable to detect network card. Check documentation for list of supported
cards."
From dmesg when loading the e1000 module:
e1000: no version magic, tainting kernel.
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
This board is the first board we've had with a PCIE connected ethernet
controller.
We are using a modified PXE image (from Novell forge with SATA support),
but the same error happens on the vanilla one from Novell.
Any help will be greatly appreciated!

Unsure if you mean the same as we have here using IBM T60 and M52, added
the latest intel driver to our imaging environment and it worked. Trying
to load to forge but can't see where to load. Using Zfd 4 SP6.
I had to build a Linux box to create the driver file, used Redhat 7.3 so
that we had an old version of GCC to compile.
Drop me an email if you want me to send our linux.1 and linux.2 or just
the e1000.o
Remove the __ to email me
Thanks
Steve Gardiner
> We recently received some boxes from Lenovo part number 8113-d5u. They
use
> the Intell 945 chipset and have an integrated Intel Pro 1000 PM on a
PCIE bus.
>
> When we PXE boot it fails to find drivers for ethernet. This happens
> during the loading of linux.2. We added e1000.ko to the list of drivers
to
> load in /etc/nwdriverList but this does not work.
>
> Error message on PXE boot is:
> "Unable to detect network card. Check documentation for list of supported
> cards."
>
> From dmesg when loading the e1000 module:
> e1000: no version magic, tainting kernel.
> Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> Copyright (c) 1999-2004 Intel Corporation.
>
> This board is the first board we've had with a PCIE connected ethernet
> controller.
>
> We are using a modified PXE image (from Novell forge with SATA support),
> but the same error happens on the vanilla one from Novell.
>
> Any help will be greatly appreciated!

How to install driver for Intel Pro 1000 PCI Network-card

Similar Messages

Maybe you are looking for