How to install drivers for nvidia geforce 6800gt for AGP

I might be completely blind, but I have no idea as to how to install the necessary drivers I need for my new (used) graphics card. My card is not displaying properly (doing all this in safe mode) and I'm pretty sure I need the drivers. Please help.
Thanks in advance.

So sorry for wasting anybody's time. Steve, you're right, the drivers were already there. I missed a very, very small detail on the card and the instructions. There were 2 minuscule pieces of tape that needed to be pulled off from the card (I guess they were left on in case the buyer had a g4. But with a g5, and 8x agp, those two little pieces of tape needed to be pulled off. After I pulled them off and re-installed the card, everything started up immediately and display works! Sorry again, but thanks for the quick response.

Similar Messages

Prerequisites: Bluetooth connections and how to install drivers or update and activate for this

Hi, Im trying to activate bluetooth in Blackberry Desktop Software can anyone assist how to activate this or get software?
Im using model 9810
Kind regards
Karl

slimgudd wrote:
Hi, Im trying to activate bluetooth in Blackberry Desktop Software can anyone assist how to activate this or get software?
Im using model 9810
Kind regards
Karl
Im not sure if I get the question. Can you please elaborate. Do you mean you want to connect your 9810 to BlackBerry Desktop Manager using Blueooth?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Update drivers for NVIDIA GeForce GT 330M

Need the updated drivers for NVIDIA® GeForce® GT 330M that comes with my Vaio Z VPCZ128GX , the drivers in eSupport are from 2010, and nVidia software does not detect the 330M card
VPCZ125GX

I've updated my VPCZ1 to 340.43 drivers but it still won't accept the transition to Windows 10, seems like they just want to find any excuse to back out of their promise of a free upgrade for windows 7 users. For anyone who is editing .inf files and still not able to get it to work, you need to update your intel drivers first. The process is a bit awkward, I tried to update the Geforce with a few pre-modded drivers, using the device manager. It would always freeze during installation or ask to reboot and start in 800x600 resolution. I also tried the latest intel drivers but was unable to update them at the time, so I gave up on the idea for a while. Later, I ran into trouble running GTAV, the game would start fine but suddenly crash to desktop while loading. I remembered how the latest driver broke the intel driver, so I rebooted with the laptop in "stamina", installed the latest compatible onboard graphics driver and rebooted in "speed" mode, which incapacitated the 2010 nvidia driver so I had a new "unknown device" under "display adapters" in the device manager. I pointed it to the 340.43 drivers (latest driver I could find for 330m which still uses inf files) which I modified earlier and success, GTAV now runs. Editing inf files is surprisingly simple, just find mention of "330m" in one of the inf files (which are lists of subsys numbers) and replace the subsys number with the one from your card in device manager when using the 2010 drivers. (there are alraedy a lot of them in the inf, I guess it's true that no two 330m are the same) I've always left it on "speed", ever since it booted with the new drivers, The GPU is easily underclockable using Precision X for more battery life. http://i59.tinypic.com/swd3lx.jpg Only side effect I know so far is that the screen rotation doesn't work, although I never tried it with the old driver combo.

Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

Greetings to all!
Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
Would be glad to realize how to solve this... Thanks a lot.
Satellite A100-599
Current OS: Windpws Vista Home premium sp1.
Message was edited by: Airtoground

I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
Contents and Installation order
for Windows VISTA
Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
- SLP Module OEMSLP2.0
- Sun Java 2 Runtime Environment v1.6.0
1 KB928190(For updated USBHub.sys) KB928190
2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
*5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
I found this driver but it says "no suitable driver found, installation wizard stops its work".
Any ideas what could it mean?
Thanks to all.

How to install drivers for ati radeon 3200?and how to config xorg.co ?

how to install drivers for ati radeon 3200?and how to config xorg.conf?

mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier

Need driver for Nvidia Geforce Go 6150 for Windows 7

Hi, can anyone please tell me where I can download the driver for Nvidia Geforce Go 6150 for Windows 7. I have tried the drivers for Windows Vista but it does not work. Thanks in advance.

I followed this tutorial after installing Win7 on a friend's HP Pavilion tx1332LA (the tutorial is in Spanish):
http://www.taringa.net/posts/ebooks-tutoriales/2570715/NVIDIA-nForce-Chipset-Driver-(windows-7-_-vista).html
And since the coprocessor was no longer listed as an unknown device (or something similar), I assumed everything worked correctly afterwards... is that alright or do I have to check in some other way?
Well, here is a part of what the tutorial says (what was enough for me):
-Should work for 32-bits and 64-bits versions (I installed it on Windows 7 x64).
-First of all, we see that in the Device Administrator, there is an unknown device, a coprocessor. That's because Windows 7 can't find its driver.
-Download and install the following:
NVIDIA nForce Chipset Driver
ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39535.exe
and see if the coprocessor is recognized.
-If not, go to the Device Administrator and find the unrecognized coprocessor.
-Right-click on it and select Update driver...
-Select browse my computer -> let me pick -> have disk (this is what the tutorial says, it wasn't exactly the same for me, but I eventually got to pick a folder on my hard drive)
-Browse and select the following (assuming C represents the drive where everything from the file above got unpacked):
C:\swsetup\SP39535\WinVista32\SMU\smuc.inf (for 32-bits version)
C:\swsetup\SP39535\WinVista64\SMU\smuc64.inf (for 64-bits version)
Note: That is what the tutorial says, but I could only select the SMU folder and not a specific file. After selecting the SMU folder, a driver was automatically listed, I selected it and it got installed.
-Now, the coprocessor should be recognized (check the Device Manager).
Hope it helps!
Pixzeto
(PD: HP, the graphical editor on this forum sucks on Opera 10.01)

How to install drivers in xi server.

hi,
how to install drivers in xi server while using different jdbc adapters.
i mean to connect with jdbc adapters we need to install drivers in xi server.
how to do that .
if u reply with steps then its good for me.
thanks in advance.
jpk

Hi jpk
If you want use jdbc adapter .. you need to deploy the jdbc drivers first..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bf4b1055-0d01-0010-32a3-b3848d77a6b9
please click this link.. and you will get one pdf file..
if your r using MS sql 2000.. for example you ned to downlaod the msutil.jar.etc..tow more jjar file are there..down laod this and follow the pdf file.. how to deploy. teps..
Don't forget to give points...
Kumar

How to install drivers from hp 7 voice tab 1351ra "update.zip"

I download HP drivers for HP 7 voice tab 1351ra from HP site. File name is "update.zip" but I don't know how to install? This installation file is for tab or PC?

The update.zip file is a rebuild file for Jelly Bean.
If your tablet has recently been updated to KitKat, then this file will not work.
I would suggest you search the support site from HP for the country you live in for instructions.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I installed window7 on mac but not able to connect internet. how to install drivers

i installed window7 on mac but not able to connect internet. how to install drivers if it needs to be.

if you downloaded driver updates through bootcamp onto flash drive then once windows is installed, open the flash drive in windows. You'll see an application called Setup. Double click on it and it will install all the drivers for wireless and ethernet and usb.
You cant just tell windows to search for driver updates. These EXPERTS aren't telling you this.

Normal temperature for NVIDIA GeForce 8600M GT

Hi, what is the normal temperature for NVIDIA GeForce 8600M GT when on notebook I use only word, or some programs, no play games.

Quote from: Mike on 01-February-10, 11:02:34
normal depends on the environment, the ambient temperature. Is it hot where you use it? Do you use it on a hard surface or place it directly on your lap or some cloth type surface. There are quite a number of variables. What temperatures are you noticing?
if I work with word or use internet the temperature is about 55*C

Drivers for NVIDIA Geforce 320m (Windows 7).

I've got my new MBP 13", but i don't have a cd with the bootcamp drivers for the video card, because I've lost my recovery DVD. So i'm seeking help with that. I wonder where can i get these drivers, because NVIDIA ones, even beta, not supporting this chip yet. Maybe i can get a recovery dvd iso or dmg somehow. I've got bootcamp 3.0 and 3.1 update installed on my windows machine, but still no luck, because the 3.1 version is dated mid january and my MBP is mid 2010.
Message was edited by: lazycoder

Somewhat related, my 13" MacBook Pro with BootCamped XP freezes when I open up BootCamp from the control panel and move the brightness slider/window around. To fix this, I'm trying to install the newest NVidia drivers.
With a NVIDIA GeForce 320M display card installed, trying to install the newest NVidia drivers on XP, I continuously get an error say "The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
One way to solve this, as suggested by someone on another forum, was to install the drivers manually, and at the 99%~100% during installation, when it shows the error message "Your installation cannot continue, will revert back to your old display drivers when you click OK" at which point I don't press OK, but immediately hold the power button down for 5 seconds, after I re-boot, my new drivers work fine.
Except,
I can't control brightness from the control panel's bootcamp slider, nor keyboard shortcuts, it's continuously 100% brightness.
I've been working on this problem for 2 days, and I can't yet properly install the new NVidia drivers into XP. Any advice would be greatly appreciated.

How to install drivers for windows 7 from bootcamp

how to install bluetooth driver for windows 7 (bootcamp)?

make the usb stick or cd disc from osx bootcamp with all the apple drivers
start windows
navigate the usbstick or disc and install the bluetooth drivers

How to Install Drivers for Win XP without the CD?

I have a 15-inch Mac Book Pro older version. I have installed the Windows XP, but my superdriver is with some kind of problem. When I insert the CD from Mac OS X, as instructed on the Boot Camp Manual, the CD is not recognized. So it is ejected after some time trying to read it.
I don't know what is happening with my superdriver, but I need to install the drivers on my Windows XP.
I would like to know if there is any other way to have these drivers installed. In addition to that, I would like to know how to solve the problem of this Superdriver.
Thanks,
João Pedro

Hi,
is the Superdrive working in OSX or does it have the same problems there ?
Do you have AppleCare ?
And if, are you still in the three-year time-limit ?
The AppleCare warranty would cover the replacement of the SuperDrive.
Otherwise you would have to pay for it.
As for the drivers you can try the OSX DVD in another Windows computer (if you have access) and then use a USB-Memory Stick of at least 1GB size and copy the full content of the OSX DVD onto the USB-stick.
Then use the USB-stick to install the drivers by manually starting the 'setup.exe' file while in your BootCamp Windows.
Since the OSX DVD is a hybrid-disc (with a OSX part and a Windows part) this does not work while in OSX, since only the OSX part of the DVD is shown.
Hope it helps
Stefan

Drivers for NVIDIA GeForce GT 650M on my Macbook?

I have been trying to get an answer to my question re: drivers for my NVDIA card. I have searched the community ( apologies if I overlooked something), but it seems there is no answer. I am not dualbooting my 2013 MacBook ( chipset NVIDIA GeForce GT 650M). I get the error that my card needs updating.
I contacted NVIDIA and their response was as follows:
“We do not have any driver listed for Mac OS for this chipset, you will have to contact Apple and check with them.
The laptop graphic cards are not manufactured by NVIDIA, they are customized, designed and manufactured by the laptop manufactures.Also, for laptops, the primary source of driver update is the driver from the laptop manufacturer”.
Apple, if you haunt these boards, – can you weigh in on this? Thanks in advance to anyone else who can shed some light on this.

betababe,
what is giving you the error that your card’s driver needs to be updated?
You will not receive an answer from Apple here. If you want an answer from Apple, contact them directly.

How to install drivers for nvidia geforce 6800gt for AGP

Similar Messages

Maybe you are looking for