How to Install em12c (12.1.0.3) on windows 64 bit

Hi Guys,
I am trying to install 12 c 12.1.0.3 on windows 2008 R2 server. The server has met the all prerequisites. But when I am trying to launch the installer it will disappear immediately without any error message. I check the installation log file there is no error about anything:
LOGFILE:
Using paramFile: D:\temp\12cCloud\em12103_winx64_disk1\oms\Disk1\install\oraparam.ini
Checking swap space: must be greater than 500 MB. Actual 3422 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Any idea why it is happening ?
Regards,

Hi, can you open an SR for this issue and share the number. Lets check few basic things:
a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
b) Can you make sure that you unzipped all these zips files in a single folder
c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
install      libskgxn      plugins     response     stage     WT.zip
jdk     oms     runInstaller      wls
d) Can you invoke setup.exe -debug
then look at the logs from -
C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM   ( for windows it will be orInstaller.err and log )
Since there is nothing in logs, opening an Sr will help us to have a web conference with you and identify the issue.

Similar Messages

How to install Hp deskjet 3050 Jobs software on Windows 8.1 Desktop putter

how to install Hp deskjet 3050 J610 software on Windows 8.1 Desktop HP Pavillion

Hello @dougz ,
Welcome to the HP forums.
I understand that you would like to know how to install your deskjet 3050 software onto your Windows 8.1 desktop.
It should be as easy as installing the printers driver. Just download the software and follow the on screen prompts.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HOW TO INSTALL ACROBAT X STANDARD ON WIN VISTA 64 BIT. FROM ORIGINAL CD. GIVES ERROR MESG .. ?

HOW TO INSTALL ACROBAT X STANDARD ON WIN VISTA 64 BIT. FROM ORIGINAL CD. GIVES ERROR MESG .. ?
WHILE I WAS USING THIS APPLICATION ON SAME OS

Hi shaz2048,
Could you please provide us the Error message or the screenshot of the Error. Also did you try installing the software after copying the contents from the disc onto your computer.
regards,
Abhijit

How to install oracle Forms and Report 10g in windows XP OS

How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
Rajeev

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

How to install Oracle 10g ODBC driver for win 64 bit?

I need to install Oracle 10g ODBC driver for win 64 bit, I donot know how to do that,
where to find the driver....
The driver 10.1.0.5.0 25-Apr-2006 2.1 MB isnot for 64 bits Win server 2003.

Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html

How to Install and configure SAP Java GUI on windows 2003 sp1.

Dear All,
Can I step-by-step on how to install and configure SAP GUI for Java on windows 2003 sp1.
Pls come with brief as I am completely new to Java and I am practicing the same on my home system first. I have latest SAP Java Pack with me.
Regards,
Dillu

hi,
Please check this link and install accordingly
SAP GUI Family
Regards,
Naveen.

How to install EBS 11.5.10.2 on windows 2008 Server

Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11

See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications.

How I install PSE 10 and end up with 64-bit version?

I just installed PSE 10 on my Win 7 64-bit system. From reading these forums, I understand that disc 2 of the 3-disc set contains the 64-bit version. But the referenced install help (and the disc labeling itself) says clearly to "start with disc 1" in either case. So I did that, expecting at some point to be prompted to switch to disc 2. But I never was. The default install location was in Program Files (x86), which I belatedly realize is the wrong folder. So I guess I need to un-install and re-install.
But what's the right way to get the 64-bit version? Manually modify the install location to Program Files w/o the x86? Start from disc 2 anyway, despite what Adobe says? I haven't yet started PSE 10...is it better to uninstall now, or start PSE 10 and make sure new catalog etc gets established?
(I have a similar posting over in the Downloading & Installation forum, but find I get lots faster responses here.)

Yeah as Michel says PSE is only 32 bit; so you only need one disk and Program Files (x86) is the correct location. Only use disk 2 if you want to install the 30 day trial of the video editing software Premier Elements which does have 64 bit support.

How to install InDesign CS6 from disk on a Windows 8.1 (64-bit) PC when installation fails after the first initialization of installation program, without error message?

I have a (legally purchased) disc with InDesign CS6 that I want to install on a PC with Windows 8.1 (64-bit). After I've double-clicked the Set-up.exe file on the disc, a box is displayed showing the progress of the initialization of the installation program. When the coloured bar in the box is full – indicating that this step is completed – the installation stops and nothing more happens. No error messages are displayed.
I can't find any useful instructions in the Adobe Help pages more than a note that there is support for also Windows 8.1 even though the system requirements printed on the disc box only lists Windows XP and Windows 7. I don't know how to make this work. Does anybody here have any suggestions? I'd be ever so grateful for any tips.

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

How to install the HP 1010 laserjet printer in windows 7 (64 bit) os pc?

I have windows 7 (64 bit) OS pc and i bought HP laserjet 1010 printer very early when i used to use windows XP. Now i got problem. I cannot find its driver for windows7 even you said that the is no driver for windows7. Then what should i do? My printer may be useless. I cannot change the OS of my pc as i am friendly with windows7. Please help me in this regard.

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

How to install DB6(DB2 for LUW) on a windows 2008 R2 failover cluster NodeB

Hi Gurus,
I am building a ECC6 EhP4 cluster on windows 2008 R2, I am following the installation guide chapter 7(document name: Installation guide SAP ERP6.0 EhP4 Ready SR1 ABAP on windows: IBM DB2 for Linux, Unix and Windows). But the step listed in the guide are not so clear and I have trouble for the database installation on the second node.
What I have done is:
1. 7.4.1 Preparing the database for MSCS step1 and 3
2. 7.4.2 Windows Server 2008: Creating the sap services and application
3. 7.4.3 Installing the central services Instance for ABAP (ASCS)
4. 7.4.4 Configuring the first MSCS node
5. 7.4.5 Installing the database instance on an mscs node(as i have done 7.4.1, i got some error in this step, then i checked some note and in note 1493410, it mentioned don't do step 7.4.1, so I uninstall the DB2, and get this step finished)
6. 7.4.6 Configuring the database for MSCS
7. 7.4.7 Configuring the Additional MSCS Node
8. 7.4.8 Installing an Enqueue Replicaiton Sever
9. 7.4.9 Installing the central instance
10. 7.4.10 Installing the dialog instance
Now I got problem on the database group, I cannot fail this to the second node. the DB2 Server resource cannot bring online to the second node. I think step 1, 4 and 5 may has some issue, but I don't know how should I install this database.
note 1493410's word confusing me, below is part of that note:
Chapter "Preparing the Database for MSCS"
You must not apply this chapter at the beginning of the installation. Instead, start the installation process with the next chapter "Configuring the First MSCS Node"
Follow the instructions in chapter "Preparing the Database for MSCS" in the exit step described in the chapter "Installing the Database Instance on an MSCS Node" before executing the db2mscs tool on the additional MSCS node only.
Point "3. Install all required operating system users ..." of this chapter is obsolete.
Anyone think my cluster still have chance to be fixed or I need rebuild it from scratch again. If I need build it again, I still don't know how to do the database installation on the second node
BR,
Peter

Hi pal,
Have you identified Ips and group names on which your sap application and DB should run..
I will give a overview...
Exam ples -
NODE A                  - 192.168.x.1
NODE B                   - 192.168.x.2 are the one which you idetify physical systems
1) Identify the drives you want to map for application and DB and make a partation and name the drives
2) Initially create Microsoft cluster service which creats cluster group----
CLUSTER GROUP   - 192.168.x.3 - Cluster name could be any thing meaningful...
Quorum disk          - 192.168.x.4 - 1 Gb drive
In point 2 if you are creating Cluster service with Heart ips you will naother ips for NODE A and NODE B ( 10.0.0.1 and 10.0.0.2)
3) Test and validate cluster configuration and ensure no erros are reflected
Above activities can be done with the help of OS Admin....
Now start working with SAP installation, even before that identify 2 names and ip address for SAP installation
Application group name can be as follows --
APPLPRD - 192.168.-x..5
Database group name can be as follows -
DBPRD - 192.168.x.6
You when you identify above drives for file systems and groups , you can start installation as mentioned in th guide...
Also let us know if you atrying to install EHP4 or EHP4.. as there some corrections to be followed in EHP4..
Open a new thread if you facing futher issues...
thanks,
rahuk

How to Install adobe reader on Samsung product with Windows RT

Hi, I have an Samsung ATIV but with windows RT but cant always read flash. How do I install adobe?
Many Thanks
Karl Nilsson
[email address removed]
Message was edited by: Truckcentralen

So is your problem with Adobe Reader, or Flash?
P.S. this is a public forum; please do not post your email address!

How to install unlimited strength policy files with 2003 windows server

Hi all,
I am working on encryption AES 256 bit key encryption.
128 is default encryption key.But for use 256 bit encryption key need to add unlimited strength policy file with jdk.
That is working fine on windows xp.
Now problem
But when i run on client machine with operating system windows 2003 server standard.
I replaced all files under folder Java\jdk1.6.0_10\jre\lib\security with files which i am using on windows XP.
Restarted the computer after update files but on windows server 2003 256 bit key encryption not working.
Giving following exception
java.security.InvalidKeyException: Illegal key size or default parameters
     javax.crypto.Cipher.a(DashoA13*..)
     javax.crypto.Cipher.a(DashoA13*..)
     javax.crypto.Cipher.a(DashoA13*..)
     javax.crypto.Cipher.init(DashoA13*..)
     javax.crypto.Cipher.init(DashoA13*..)
Please suggest me how to run encryption on windows server 2003..
Thanks
Anu

anu1106 wrote:
I replaced all files under folder Java\jdk1.6.0_10\jre\lib\security with files which i am using on windows XP.Why? Why not just install the unlimited strength files in the normal way according to the installation instructions given in the distribution file?

How to Install Oracle Data Access Components (ODAC) on Windows Server 2003?

I recently installed "32-bit Oracle Data Access Components (ODAC) with Oracle Developer Tools for Visual Studio" on my computer (Windows 7, 64bit). Everything seems fine and I can develop and run my application in Visual Studio 2010 and IIS 7.
Now, when I deploy my application to the Server, it raises error:
Exception: System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleCommand' threw an exception. ---> Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Obviously I need to install ODAC on the server, too. My server is:
- Windows 2003 32 bit R2 (I know, I know!)
- IIS 6
So. I downloaded the same installation from Oracle website (ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio [11.2.0.3.20]) and installed it on the server. But still getting the same error.
PS: When I was installing, I chose Oracle Data Access Component for Oracle Client 11.2.0.3.20 in Oracle Universal Installer. hmmmm. Should I choose "Oracle Server" instead? Screenshot
Edited by: 1000434 on Apr 17, 2013 6:35 AM
Edited by: 1000434 on Apr 17, 2013 6:36 AM

ODP.NET, Unmanaged Driver uses unmanaged dependencies in the Oracle Client. The error you see means you have another Oracle Client installed on the Win2003 machine and ODP.NET is attempting to load the incorrect Oracle Client version, rather than the version you installed ODP.NET with.
What you need to do is direct ODP.NET where to find the correct version of its unamanaged Oracle Client dependencies. This will be generally the bin directory of your Oracle Client home that was installed with ODP.NET.
You can learn more about DllPath here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/InstallODP.htm#sthref94
If you're not familiar with how to set ODP.NET settings in the Registry or .NET config files, you can read how to do that here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm#sthref106

How to install Rescue and Recovery 4.21 on Windows 2003

There should be a good amount of users running Windows 2003 on their thinkpad for various reasons. As much as I tried, I could not get Rescue and Recovery's MSI to install on my X61 running Win2003 R2 SP2, despite attempts to modify the Setup.ini file.
the changes made in setup.ini:
[Win2003Server]
MajorVer=5
MinorVer=2
MinorVerMax=3
BuildNo=3790
PlatformId=2
The returned installer error is "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later".
This is such a shame as I'm pretty sure RR would run just fine on win2003 as both WinXP and win2003 are based on the same underlying technologies and code. Please advice if there's any method such as a command switch for MSI installer to suppress OS detection error or any modification that can be made to setup.ini to get it to install on win2003 or any utility that can be used to modify MSI files and database? Thanks!
Message Edited by Xseriesfanboy on 08-31-2008 08:26 PM
Message Edited by Xseriesfanboy on 08-31-2008 08:30 PM
Solved!
Go to Solution.

Alrighty..I've manage to google a hack to this problem of getting Rescue and Recovery to install on Windows 2003. So let this post be a guide to how to get this done:
Getting the tools to modify Rescue and Recovery MSI (Windows Installer)
Download and install Orca MSI editor from http://astebner.sts.winisp.net/Tools/Orca.zip
Review http://ravi1337.blogspot.com/2007/05/orca-msi-editor-make-any-software.html, this guide should give you a good idea what you'll be doing with this tool.
Download Rescue and Recovery™ 4.21 from Lenovo
Download Rescue and Recovery™ 4.21 for Windows XP (32-bit) or Windows 2000 from http://www-307.ibm.com/pc/support/site.wss/license.do?filename=thinkvantage_en/z652_setup_rnr42_016c...
Ensure you are downloading full install with all language pack to avoid any missing installation file due to regional settings
Run the installer and see that all files are extracted accordingly.
Modification of Rescue and Recovery Installer
Delete all files in C:\Documents and Settings\(User Account Name)\Local Settings\Temp\ this will prevent confusion on which files are unpacked and created by RR installer
Extract z652_setup_rnr42_016c.exe into a folder named z652_setup_rnr42_016c.
Execute tvtrnr42.exe
The MSI installer is then unpacked to the following default directory: C:\Documents and Settings\(User Account Name)\Local Settings\Temp\. Note that the installer creates two directories for installation of RR, that are {F151F2B3-0C32-44D3-90E2-E639B8024622} and _isXXXX <--- 4 randomly generated digits
The folder _isXXXX contain Rescue and Recovery.msi
On the first run of the installer, the following error will be shown "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later". DO NOT CLICK OK! This is cause the installer to purge all installation files and related directories in the temp directory. Just leave the error window as it is without clicking the OK button!
Copy all TVT files from folder z652_setup_rnr42_016c into both directories
Modify setup.ini entry for Win2003Server with notepad and save changes:
[Win2003Server]
MajorVer=5
MinorVer=2
MinorVerMax=3
BuildNo=3790
PlatformId=2
Right-click on Rescue and Recovery.msi and edit with Orca
Go to LaunchCondition Table
Drop the following rows and save changes:
(((VersionNT=501 AND ServicePackLevel>=1)OR (VersionNT=500 AND ServicePackLevel>=3)) AND WINSERVER=0) OR Installed- The current operating system is not supported for running [ProductName]. Supported operating systems include Microsoft(R) Windows(R) 2000 with Service Pack 3 or later and Windows XP with Service Pack 1 or later.
IEEXISTS=1 OR Installed - [ProductName] requires Microsoft(R) Internet Explorer version 5.5 or higher. You cannot install the Rescue and Recovery program without this version of Internet Explorer.
INCOMPAPPNAME=0 OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName]. This application cannot be installed. To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
Not SGEWRONGVERSION OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName]. This application cannot be installed. To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
When you're done with these modification, re-run Rescue and Recovery.msi without closing the previous error window. Rescue and Recovery should now install without any glitch! Good Luck!
Message Edited by Xseriesfanboy on 09-01-2008 06:37 AM
Message Edited by Xseriesfanboy on 09-01-2008 06:38 AM

How to Install em12c (12.1.0.3) on windows 64 bit

Similar Messages

Maybe you are looking for