How to install Epson Stylus C88 printer on 10.9.3?

How do I install Epson Stylus C88+ printer? Is it supported by 10.9.3?

Hi Janet ...
There is a driver available for v10.9 Mavericks to download here > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58602&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X9
After you download the driver, open System Preferences > Printes & Scanners then select the Print tab.
Then click ➕ to install the printer.

Similar Messages

After installing Epson Stylus SX535WD printer on Windows 7 computer Firefox produces a pop-up error box when I launch Firefox or open Web page

After installing my new Epson Stylus SX535WD printer on my Windows 7 32 bit computer, Firefox now produces a pop-up error box every time I launch Firefox or open a new Web page in it the following error box pops up multiple times: [JavaScript-Application] Server could not log you in. This error has never error occurred before I installed the printer.

Posting the same question multiple times will not get you an answer any faster..

Installing Epson Stylus SX535WD printer causes pop-up error box in Firefox

After installing new Epson Stylus SX535WD printer on computer, Firefox now produces a pop-up error box. every time I launch Firefox or a new page in it the following error box pops up multiple times: [JavaScript-Application] Server could not log you in.

Posting the same question multiple times will not get you an answer any faster..

Epson Stylus C88+ won't print from iPhoto 6

Recently bought an Epson Stylus C88+ printer to replace the Stylus C86 that is not printing well anymore. Discovered that the C88+ does not print from iPhoto 6.0.5! The printer does print from Photoshop Elements 2 and does print documents fine. When we choose "Apple P" it starts the printing process, makes the starting noise, but then stops and the red exclamation point appears next to the printer icon on the dock. The original driver came from the printer's install CD that came with printer. I had seen some instructions from Epson about removing and reinstalling the printer driver, so I have done the following: 1) removed the 2 printers above from the Printer Setup Utility, 2) reset the printing system in Printer Setup Utility, 3) removed the Epson folder from the Library folder in Mac HD, 4) deleted the Epson printer receipts from the Library folder in Mac HD, and 5) reinstalled the C88+ driver from the Epson website. It still does the same as before. Any othe ideas?

I'm not sure what I should be looking for in Page setup settings and iPhoto print window. How do I check the driver in Printer Setup Utility? I already added the printer after reinstalling the driver from the Epson website; Printer setup utility seemed to find the driver when I did that because the printer is listed and printer is otherwise working.
I also looked at Colosync utility as you suggested and found my computer under devices and verified the Profiles in Profile First Aid. Nothing was found wrong for any Epson device, only some Lexmark profiles were incorrect (they must be ones installed with Tiger that I don't use), so didn't do the repair.
Here is what it says in System Profiler for the printer (doesn't actually say Epson USB and I wonder what the question mark means):
Stylus C88:
Status: Idle
Print Server: Local
Driver Version: 2.72
Default: Yes
URI: usb://EPSON/Stylus C88?serial=FGS020609051637250
PPD: EPSON C88 Series (1)
PPD File Version: 1.0
PostScript Version: (3011.104) 0
I'm not sure where they get that serial number from. The one on the back of the printer is totally different. I was a little suspicious that nowhere in the Printer setup utility or system profiler does it actually say I have a C88+; it just says C88 series, etc. It says on the C88+ download page says I would get driver v2.7aA. I guess this is the same as what I have. I was warned by Epson that the C88 and C88+ are 2 totally different printers, but when I checked the C88 download page it says I would get v2.5bA, so I don't think I downloaded the wrong driver.
For anyone else who has the same problem, I have discovered that as a workaround I can open photos in Photoshop Elements from iPhoto and can print them using Elements, so I'm ok unless I want to try printing an iPhoto greeting card, etc.
Thanks for any additional thoughts.

Epson stylus c88+ will not print from photoshop elements 13

I am using Photoshop Elements 13 to edit some images. I am trying to print on the Epson Stylus c88+ inkjet printer but i am getting an error that the saved printer information is not compatible with this version of Photoshop Elements. What do I need to do? I have uninstalled and reinstalled the printer but it still does not work.

Try GutenPrint:
Click here to begin autodownload: http://tinyurl.com/8ctlaw.
You might also benefit from installing Usbtb & the latest Ghostscript & CUPS:
Click here to begin autodownload: http://tinyurl.com/9mgm38.
Here's a link to GNU Ghostscript 8.63: http://tinyurl.com/9g9tx9.
Here's a link to CUPS 1.3.9: http://tinyurl.com/yuckcm.
Here's a link to Foomatic-RIP:
Click here to begin autodownload: http://tinyurl.com/4ep5dv.
Finally here's a link to HPIJS:
Click here to begin autodownload: http://tinyurl.com/ayhp9z.
You should find that your HP printers print much faster now since Usbtb is faster than Apple's built-in USB drivers that they ship with Leopard by default.
<Edited by Moderator>

Difficulty installing Epson Stylus Photo PX720WD Printer.

Difficulty installing Epson Stylus Photo PX720WD Printer. The set-up disc says I need Rosetta. Does anyone know what this is or how I get it? Thanks

Welcome to Apple Support Communities
Connect your printer, go to System Preferences > Print and Scan, press + and install the printer

Epson Stylus C88 won't print

I haven't printed to this printer in a while, so who knows what happened, but today, I try to print, and the print queue for my Epson Stylus C88 will show every job with a Status of "Error".
The queue says "Printer Ready"
The Epson Printer Utility can communicate with the printer
The driver is 9.00. Software Update does not say that any new driver is available.
I'm on Mac OS X 10.7.5
Any ideas?

Unfortunately, deleteting the print jobs from the queue usually fixes this issue.
Then restart your Mac and try printing.
If that doesn't help, might be corrupted printing preferences.
Open a Finder window. From the menu bar click Go > Go to Folder
Type of copy paste the following:
~/Library/Preferences/com.apple.print.PrintingPrefs.plist
Click Go then move the com.apple.print.PrintingPrefs.plist file to the Trash.
Restart both the Mac and the printer.

How to install Epson printer without software cd

I'm trying to install Epson ink jet printer with wifi without a software disc since I have a Mac mini without cd/dvd external unit. Any suggestions? Thanks in advance.

Go to the Epson website and look up the appropriate driver for your printer and the OS your mini is using (appears to be 10.9) and follow the instructions......
http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp?BV_UseBVCookie=yes

Getting lousy Image Prints from a Epson Stylus P2200 Printer & IMac (Intel)

Ok here's the health warning - I'm a recent Windows to Mac convert - so this may well be me - but here goes ...
I have an Epson Stylus P2200 Printer (which works great on Windows XP) and I am having trouble printing anything close to decent looking photos when its connected to the IMac. I've tried with both Aperture & Photoshop Elements - same problem/outcome. The photos come out in low resolution & v. poor color quality.
I'm using the Stylus Photo 2200 (FW) driver that came standard with the IMAC - but it has very limited features compared to Windows - I have selected a ICC profile (downloaded from Epson) that matches the paper I am using.
I suspect its me - but can anyone shed any light on where I'm going wrong?
Does anyone have any experience of this driver - is it me? or is there something I'm missing?
Thanks
Chris
IMac (Intel) Mac OS X (10.4.6) 1.5GB RAM

I have two Epson printers, a 2200 and it's working fine with my MacBook Pro. Before you fiddle around with the Color Management, make sure your printer is in good working order and the latest Intel drivers are installed.
Banding is not normal printer behavior. You mentioned that you're using a scan of a MacBeth color checker chart. You didn't say how the scan was made, but I'm assuming you know for sure that the banding is not in the image. On my 2200 I might get bad color if I don't use the correct profiles but I've never had banding problems unless the print heads need cleaning.
Here are my suggestions:
1. Don't use the drivers bundled with Mac OS X. Download the latest ones from support.epson.com. If you haven't checked recently, check and download them again. The latest driver posted is 3.0aAs dated June 15, 2006.
2. Epson's instructions with the latest 2200 driver is to do a "Reset Printing System" first, then restart your Mac before installing the driver and adding the new print queue.
3. When adding the printer with the Printer Setup Utility, make sure you're adding the Stylus Photo 2200 that appears under the Epson USB or Epson FireWire category depending on whether the 2200 is connected to your iMac with FireWire or USB. Note that unlike the old PPC 2200 driver which has separate "printers" for Borderless and Minimize Margins, Roll Paper and Sheetfeed, the new driver installs only one printer. Roll paper and borderless printing options are now handled in the Page Setup dialog like the R-series printer drivers. (Unfortunately, this causes incompatibilities in a mixed PPC and Intel printer sharing environment).
4. Run the Epson Printer Utility and use it to check printer status and do a nozzle check. This will help check if the Mac is communicating with the printer.
Now you can start making your test prints. Most likely, you'll be using the Print Settings and Color Management options in the Print dialog frequently. If the prints are coming out halfway decent or better, then you can be quite certain that the printing system is set up properly and now you can worry about the ICC profiles and color management.
Also, don't forget to download the better profiles for the 2200 from support.epson.com.
And, if you're managing color in Photoshop, turn OFF Color Management in the Print dialog and vice-versa. Otherwise, you're managing color twice!

How to install Epson ICC profiles using Photoshop CC?

How to install Epson ICC profiles ussing Photoshop CC on Mac?

Danny,
Just stop and think for a moment. Firstly, it's not Rocket science to produce an icc profile, and does not involve the profile having to physically 'fit' into a pre-formed item such as the razor blade analogy you used.
Secondly, If the likes of Epson and HP did produce printer profiles for all makes of paper, can you imagine how much more product they would sell. Printer companies are currently missing out on substantial amounts of income at the moment because the cost of their inks is more expensive than gold! Thus, the third party ink manufacturers - although not producing an ink as good as the original - are earning large sums of money and once again this is income loss to the major printer manufactures. Can you imagine what would happen if certain vehicles would only run on a specific fuel? I don't mean Diesel or Petroleum, but different manufacturers, Shell, Texaco, Murco etc.
At the end of the day the only person who is adversely affected by this business model is us, the consumer.
I really don't think they need you to be standing up for them Danny.

Illustrator cs4 and Epson Stylus R2880 printing problems

I am having printing problems. I am trying to print from my cs4 to my epson stylus photo printer r2880 and am having problem with my picture getting cut off on the left side when I print. The print screen looks perfect but when I go to print, it always cuts off the left edge and the bottom. I tried playing with the x and y's but have no idea what I am doing. Does anyone have this combination of cs4 with the R2880 printer and can help me solve my problem?

Hi Wade,
I have tried playing around with that but I am not sure what I am doing. Here's what it is set at.
On my drop down print screen, i have the size set as US Letter (Sheet Feeder Borderless (retain size).
When I check the 'fit to page' button it actually puts a bigger white boarder around it. The fit to page number says (96.4706%). Shouldn't it say 100%? If I leave it as do not scale I still have a small border around it.
I am not sure about the xy settings. When I have it to 'fit to page' it is:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, .1632) Bottom right corner (0, .1632)
If I have do not scale button clicked:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, -.225) Bottom right corner is (-.3, -.225)
Do these settings look correct? If not, what should my setting say and how can I set it without the setting changing back everytime I open this window.
Thanks for responding,
Celeste

Epson Stylus C88+ not compatible

I have Mavericks 10.9.1, and my new Epson Stylus C88+ is not compatible. any advice? I talked to Epson, they had no solution, said i should talk to apple.

The Epson C88 driver won't work?
You could try the Gutenprint drivers, they have one for the C88.
http://gimp-print.sourceforge.net/p_Supported_Printers.php

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2?

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2? Several attempts with various downloads from Apple and Samsung sites have failed. Any help is higkly appreciated. Thanks in advance!

Thias is what I find in system information:
Samsung Scanner:
Version:          2.01.12
Erhalten von:          Apple
Zuletzt geändert:          10.04.14 21:20
Art:          Universal
64-Bit (Intel):          Ja
Signiert von:          Software Signing, Apple Code Signing Certification Authority, Apple Root CA
Ort:          /Library/Image Capture/Devices/Samsung Scanner.app
Informationen:          Copyright (C) 2013 Samsung Electronics Co., Ltd.

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

How to install Epson Stylus C88 printer on 10.9.3?

Similar Messages

Maybe you are looking for