How to install Ethernet card on Toshiba Satellite 2105CDS.

I installed Solaris 8 on my Toshiba(Satellite 2105CDS) laptop.
I am not able to install Linksys ethernet(pci) card.
Can anyone please help me in solving this problem.
Thanking you.
John
email : [email protected]

Ask Linksys for a driver.
Sadly the only supported PCMCIA (not not PCcard) device is the 3C589. I use these and they work fine.
You may need to apply the PCMCIA patch from www.xig.com

Similar Messages

How to install lan card in solaris 11

Hi,
can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
When i do ifconfig -a it only displays loop back driver only
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
The other driver was missing can please some one tell me how to install that?

Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
http://www.oracle.com/webfolder/technetwork/hcl/index.html
There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

How do I install Ubuntu on a Toshiba Satellite L670D-102

Hello
I have been trying to load Ubuntu 10.10 (tried both AMD64 and i386 versions of Desktop Edition) onto a Satellite L670D-102 using a Live CD. The CD spins for a while, there is some activity on the hard drive and then I get a flashing white cursor (a hyphen) on a black screen. I left it all night and it remained the same. I tried with a 'live' usb and again, no boot. The cds and usb work in other machines running both amd and intel cpus.
The sort of questions that spring to mind are:-
Is there some security or other setting within the cmos that prevents anything other than Windows being loaded?
Are Toshiba simply anti- Linux and I need a new machine?
Do I need a special bios to run Ubuntu?
Any help in resolving the issue would be welcome.

Hi
I use a Toshiba Satellite L655. It came with a Win7. The first thing I did after buying it was to wipe out Win7 and install ubuntu 10.10 on the entire hard disk (not a dual boot or Wubi install). Now I want to try out ubuntu 11.04 beta from a live usb and I am trying to change the boot order. The laptop doesn't boot from the usb drive. I am unable to enter the BIOS. I have tried pressing ESC, F2 etc while switching on the laptop. So far, I have not been able to access the BIOS setup.
I have tried googling and I read about Toshiba's "legacy-free" laptops. But am not sure if mine is such a one. Now, I don't have Win at all in my laptop. I have only ubuntu 10.10. I need to access the BIOS setup and change the boot order so that my laptop boots from the USB drive. How do I do this?
Any guidance would be welcome.

How to install the new BIOS for Satellite Pro M50 running Ubuntu

I am running Ubuntu on my Pro M50. Could someone advise me what the latest BIOS is and how to install it?
The BIOS upgrade site here seems to havean exe file but I couldn't see the BIOS file within?
Thanks

Why do you want to update the BIOS?!
Do you have any big troubles with your notebook?!
The Toshiba European driver page provides BIOS for XP and BIOS for Vista.
Both BIOS versions must be executed while the operating system is running!
If you use the Linux on your notebook, you will be not able to update the BIOS!!!
Do you understand?
Once again; The BIOS update should be done ONLY if its absolutely necessary. In other case dont update it!

How to install sim card

How do I install sim card in my iphone. I took it out to clean and dont remembeer its placement on the sim card slide

How many PXI Ethernet Cards supported in LabVIEW RT?

How many ethernet ports does LabVIEW RT support. If I put in several cards (such as PXI-8231, PXI-8232, or PXIe-8234) into a PXI chassis, then would I be able to configure and use them all?

Hello kmcdevitt,
It should be fine to have as many ethernet cards as you need in the PXI chassis. There's a global limit depending on the number of interrupt lines available on the motherboard (or PXI chassis), but it's up to around 16, depending on the controller. You would set them up using the Advanced Ethernet Settings section in MAX, as explained in this LabVIEW Real-Time Module Help article. I posted the 2011 help but this works for a few versions back, what version of LabVIEW RT are you using? Hope this helps!
Regards,
Deborah Y.
LabVIEW Real-Time Product Marketing Manager
Certified LabVIEW Architect
National Instruments

How to install new card to the existing 15454

i have new cards which is CISCO 2.5Gbps Multi-rate DataMuxponder 4ch 1558.17-1560.61 (15454-DM-L1-58.1=).
if i install to the existing system, is it will affect the system?
do i need to reconfigure the existing system using DWDM metroplanner before install the new cards?
what are the correct steps to install the new cards?
thank you

Hi,
Answers to
1/, no it will not affect your system as these cards are hot pluggable, and as long as you insert into the right slot (refer to the Cisco documentation)
On this Cisco web page, http://www.cisco.com/en/US/products/hw/optical/ps2006/prod_installation_guides_list.html
2/ you should not for minor card addition like this.
3/ you will find the procedure document for the applicable rel of ONS software you are running. The procedure will have a section that documents steps to install various card type.
Hope this helps.
cheers,

Satellite A100-773 - How to install Ethernet Controller driver?

Hi
i reinstalled Win Xp Prof on my Satelite A100-773 (PSAA9E) and have a problem with the Ethernet Controller. In the device manager the controller is marked with a yellow '?'.
I use this driver http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory =2&selFamily=2&selSeries=153&selProduct=624&selSho rtMod=444&language=17&selOS=10&selType=all&yearupl oad=&monthupload=&dayupload=&useDate=null&mode=all Machines&search=&action=search&macId=&country=12&s electedLanguage=17&type=all&page=2&ID=55434&OSID=1 0&driverLanguage=42
install it over the device manager and right click on ethernetcontroller --- driver install. here comes the message that no driver is found (in the right!!! folder) an nothing can be insatlled...
I also delete ethernet controller, so that windows automatic reseacht for it, but nothing work.
I don't knwo what I can do
PS: Chipset Utilitys are installed

Hi
Are you sure thats the Ethernet controller and not the WLAN card? Ethernet controller in device manager can mean both
Normally you can get all drivers on the Toshiba website. Furhtermore you should try to install the drivers manual via advanced installation routine. If you right click on the ethernet controller and choose update driver. In next windows choose the advanced installation where you can choose the driver directory yourself.
By the way: Why you dont use the Toshiba recovery disk? There are already all drivers preinstalled. :)

How to install recovery image on my Satellite L655-121?

I Have a SATELLITE L655-121 Toshiba's labtop ,,,
I've made a Recovery to get rid of the problems i faced in Windows 8 beta ,, but the recovery didn't completed :(
Now i can't either repair or remake the recovery !! I've stuck !
I can't use the HDD Recovery that presents on ' D ' Driver !! and i don't have the CD on which the copy is present ,, i just have the Serial Number :D
The Widows is " 7 Home Premium OA "
The laptop is useless now ,, what should i do ? if i downloaded this Windows from Microsoft and used the S.N I have , should this work correctly ??

>... but the recovery didn't completed
How to understand this?
> if i downloaded this Windows from Microsoft and used the S.N I have , should this work correctly ??
No. serial number has nothing to do with recovery image.
If you want to have original Toshiba recovery image installed on your notebook you must order Toshiba recovery disc - https://backupmedia.toshiba.eu/landing.aspx
Other option is to install own OS version and later install all necessary drivers, tools and utilities additionally. All of them you can find and download from Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Re: How to install Win XP on a Satellite A300-15D

Can anyone help me with the procedures on how to permanently delete Vista Home Premium and replace it with Windows XP Professional?
Once WinXP Pro is installed, will the drivers for my laptop Satellite A300-15D still work because of the new operating system?

Hi
If you want to replace the Vista with your Windows XP OS then just simply boot from the Windows XP CD and follow the installation instruction on the screen.
After the XP OS installation you will have to visit the Toshiba European driver page and will need to download the compatible XP drivers!
(maybe you could do this before formatting the HDD and Vista)
Your notebook seems to belong to the *PSAJ4E* series.
Please choose this number before you would start the driver download.
By the way; The notebook support the SATA controller therefore you will need to include the SATA driver during the XP setup procedure.
The Storage Manager which is available on the Toshiba driver page contains such SATA driver.
If you dont know how to include such SATA driver please use the forum search option for searching.
There are a lot of similar threads regarding the SATA driver installation.
Bye

Re: IMPORTANT - How to install Windows 2000 on a Satellite L300-16M (PSLB0E) ?

Hello,
I'm an independent developper and absolutely need to install several operating systems on my *Satellite L300-16M (PSLB0E)* : it's very important for me because I've to check working of piece of software under every environment for real (not using solutions like VMware, for example).
Well, so, at this time, I've done an Acronis TrueImage backup of original full HDD, then deleted original WinRE and Data partitions, reduced and moved at beginning of disk the Vista partition... and installed System Commander 8 to prepare my future multi-boot. At this time, all sounds right : Vista works perfectly !
Also, note I've configured SATA in Setup BIOS to be in "Compatibility" mode ; just because I don't need AHCI in my type of use !
Second stage : now, *I have to install Windows 2000 Pro (SP4) FR*. Of course, I'm aware that the blocking point is the SATA/AHCI driver, wich is absent in the Win 2K CD... So, I've just made a new CD integrating these drivers using nLite ; at this time, I've tried using driver from Toshiba's XP Drivers page and Intel site about Intel 82801 HEM/HBM SATA AHCI Controlleur (ICH8M).
But it doesn't work completely : the Win 2K install starts... All drivers are well loaded (including the AHCI ones) and just after this loading step, I get a black screen with just a blink cursor at top left of screen... indefinitively :-(
I've also tried to switch SATA to "AHCI" mode in BIOS and it's the same.
So, what to do next ?
Do I've used the wrong AHCI drivers ? Do I need to incorporate the maximum of Toshiba Drivers (about chipset, display, sound) in the Windows 2000 install CD using nLite ? I mean until the CD capacity is not reached.
Is there a way or tutorial to install Windows 2000 somewhere ? For XP, I think it will more easy because SP3 seems to support AHCI, but, just now, my problem is to install Windows 2000 : even if Microsoft wants to leave-it, there are a lot of professionals who still use-it... And my job, as developer, is to do my software works on this OS too ! *I really need to find a way to install it on this computer !!!*
Awaiting your lighted replies and all tips or idea which could help me to achieve the task.
In one word : HELP ! oops !
Message was edited by: eanon

Thanks xaver, but I've already tried stormng-20070827133046.zip and it remains the same :(
About all driver ? Oh, in fact, I'll try to see if the XP ones work and if not I'll have a not-fully working Win 2K, but it will be enough for me to test my programs... I hope, at least, I'll be able to do display driver work !
Well, seeing I don't succeed using Intel/Toshiba drivers and nLite, I'm trying at this time to go through another way, installing Win2K in a VMware, then forcing install of the Toshiba AHCI driver, then doing a TrueImage of this and restauring in the Toshiba ! I'll see...
However, if someone has an idea, don't hesitate.
EDIT : I'm now at the step to try to force the Store Manager driver from Toshiba (the one given for this model under XP), launching iata_cd.exe and after some second I see a message saying that this OS (Windows 2000) is not supported by this driver... So, from now, I clearly know why this driver failed when I gone through the nLite-customized Win2K CD install directly on the Satellite :-(
So, this change the game : does it exist a Windows 2000 compatible driver for the Satellite L300-16M's AHCI Controller ??? This is the question !
If you have the answer, very thanks to tell me, of course...
Message was edited by: eanon

How to install second hard drive in Satellite A200-1BW?

I see my new Satellite A200-1BW has two hard drive bays,on looking into the second bay I cannot see how a second drive can be fitted as the plug in socket appears to be missing.
What parts do i need to fit to fit a second drive as they are held in stock by my local computer outlet and are quite cheap,can anybody advise me on part numbers etc of the bits I need.
Thanks
Steve

Hi,
there are many different models of your machine on the market and some of them have a second drive, some of them not. If you bought a model with one drive then you will only be able to install ONE drive because your model was only intended to have one drive.
And even if you solder a connector to it or attach it in any other way then you dont know if the bios supports the second drive.
My suggestion on it: obtain a USB-HDD and store your data on that drive. Would be making more sense then spending a lot of time on investigation to find out that your mainboard is not able to handle a second drive.
Cheers

How to install Ethernet and Wireless adapters after fresh install

My laptop's hard disk died. I got a new hard disk and did a fresh install. But I can't see the Ethernet and Wireless icons on the tray. I am assuming that I have to install those drivers. How do I go about that?
Terry

The easiest way is to download
1, Go to Lenovo's support site, find the driver matrix for your model of ThinkPad, download the Ethernet driver, and install it.
2. Then download and install ThinkVantage System Update.
3. Run TVSU and let it find and install all the drivers, utilities, etc. that you need.
You'll also want to do a Microsoft Update at the Microsoft site.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Help! How to install graphics card driver?

I installed a Solaris 8 system on Intel platform with S3 Savage 4 graphics
card equipped. Seems Solaris doesn't support this card, so I downloaded a
driver file named savage_drv.o from somewhere. How can I install it
under Solaris to replace default standard VGA card I installed during
installation.
Thanks

i'm in the same situation. i have solaris 8 x86 and i went to http://www.probo.com/timr/savage40.html and downloaded the savage_drv.o driver as well (because it's the only hope i've found related to running a savage4 on this platform) and i'm not sure how to go about switching out this driver for the VGA driver that's currently implemented. there are no instructions about this on the site, the only real instructions are for linux/bsd and those are pretty much no-brainers anyway.
if ANYONE knows how to do this that would be great. thanks in advance!

How To Install NEW Versions Of Toshiba Video Player 3D...?

Hi,... ... ... Having Problem INSTALLING NEW Version Of The Toshiba Video Player 3D To My Qosmio F755-3D290 ...?Think Might Be Some Missing Component With The Start-Up Services Or Others Elsewhere In The Harddrive Or What...?Anyone Knows How And What To Do...?

Hello,
Welcome to Adobe Forums.
As you don't have internet on computers, you can download offline installers for Flash Player 11.4 from here :
For Internet Explorer :http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe
For Mozilla Firefox & Chrome : http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
Thanks,
Vikram

How to install Ethernet card on Toshiba Satellite 2105CDS.

Similar Messages

Maybe you are looking for