How to install Exchange Server 2010 with the name of my existing Domain Controller.

I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)

Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

Exchange Server 2010 with SP3 Management Tools

Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote Powershell, this service must be running. Make sure that the W3SVC is running on at least one Exchange server.
Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?

I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx

Installing Exchange server 2010 on Server 2012

I understand that SP3 supports Server 2012.
Looking at the size of the extracted files on SP3 this is not a slipstreamed later version of Exchange right?
Am I also right in thinking, I just need to:-
- Update the schema and Domain prep it
- Use the Exchange 2010 with SP1 disk to complete base install and then apply SP3
Does that sound about right?

Hi,
Apart from the suggestions above, before you decide to install Exchange 2010, please make sure you meet the Exchange 2010 installation prerequisites. For more details about Exchange 2010 prerequisites, you can refer to the following article.
http://technet.microsoft.com/en-gb/library/bb691354(v=exchg.141).aspx
And here is a related article about how to prepare Active Directory and domains for installing Exchange Server 2010 which may help you.
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Hope this helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Can we possible to install exchange server 2010 on my server 2012 Operating system ?

Sir ,
I am planning to install Exchange server 2010 Sp3 . But in my operating system is Windows Server 2012 R2 . So i have to confirm is that possible or not ? Can anyone know please help me. Thanks in advance .

Hi,
As all above saying, it is not supported to install Exchange server 2010 SP3 in Windows Server 2012 R2. Please refer to
supported Operating Systems for
Exchange server 2010:
http://technet.microsoft.com/en-US/library/aa996719(v=exchg.141)
Additionally, Windows Server 2012 R2 will be a supported operating system for Exchange Server 2013 with SP1 coming in early 2014. Let’s waiting for the release about it. For more information, please refer to:
http://blogs.technet.com/b/exchange/archive/2013/11/20/exchange-server-2013-service-pack-1-coming-in-early-2014.aspx
Best Regards,
Winnie Liang
TechNet Community Support

The operation could not be completed because an item with the name xyz already exists

I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?

If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message "The operation can't be completed because an item with the name .DS_Store already exists"

Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestions

This is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
     ditto -h | --help

Cannot install exchange server 2010 without small business server 2011

we purchased Windows Small Business server 2011 for one of our servers and installed the software and setup exchange server for the office. We had some 3rd party software that would not work with small business server so we had to install windows
2008 r2 server. we still need exchange server 2010. Is there anyway to install without small business server? When I entered the key in exchange server for the small business server it is saying that it is an invalid key. We have a
genuine version of windows small business server. is it all or nothing for the software. Thanks

SBS is indeed all or nothing. Breaking apart the individual components is not allowed. That includes exchange. If you want exchange without SBS, you'll need to buy exchange separately and exchange CALs. If you only have SBS CALs and aren't going to run
SBS, you'll need Windows CALs as well.

How to Make exchange server 2010 an IMAP server

hi
how do I Make exchange server 2010 an IMAP server?
Any step by step guide?
tnx

Hi,
To configure IMAP for Exchange 2010, you can refer to the above suggestions and try the articles.
Moreover, here is reference about how to configure Exchange account with IMAP mode:
http://support.sherweb.com/Faqs/Show/how-to-configure-a-imap-account-in-outlook-2010-exchange-2010
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Need Documentation on how to intehrate Exchange server 2007 with SAP portal

hi,
i need some documentation on how to integrate microsoft Exchange server 2007 with SAP portal.
can anybody help?

Hi Payel,
Pls check the links below..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/ec015c8446d447a83776d40f31c84f/content.htm">Link</a>
Note : As specified in the document, only the following versions of Microsoft Exchange server are supported:
● Exchange Server 2000
● Exchange Server 2003
Regards,
Venkat.

Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

Dear all,
first of all thanks for reading this topic :-)
In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
We are using Outlook Anywhere, Active Sync and OWA.
Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
To install the mailbox role, I think this will not affect anything.
Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
Any help would be appreciated!
Jennie

Hi Jennie,
Below are the steps if you are not planning to upgrade.
1) Install new Exchange2010-SP3 Server all roles Please check
this
2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
this
3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
For OAB, Autodiscover, EWS please check steps 5,6,7in this
For setting OWA and ECP URLs please check
this.
4) Move few mailboxes as a test and check. If no errors move the rest.
5) Move your OAB generation server to the new server. Please check
this
6) Move you public folder contents to the new server you have. Please check
this
7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
8)
Add the new server as the source server and in the current send connector and remove the old server from the send connector.
Shutdown the server for a couple of days and monitor. So you will know if you missed something.
Uninstall Exchange2010 from the add remove programs.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Install Exchange server 2010 in Single forest Multiple AD domain Scenario

Hello Folks,
I am trying to install a new exchange 2010 server in an enviroment which never had exchange.
Below is the env details
1 Forest
3 AD domains
Coustmer's requirement is that he wants to install exchange in only domain and other domain will not have exchange server the domain A which has server install should host the exchange mailbox's for other 2 domains and also capable enough to handle
the mailflow of each domain with diffrent SMTP domain. Have done research but havent got the exact scenario.
Now i am confused on how to start with this project any feedback inputs would be of great help to me.
BR/Deepak

Exchange server is forest wide role, so it does not depend much on number of domains in the same forest. Usually, you install Exchange in forest root domain in your forest, and Exchange will host mailboxes from any user from entire forest. So, actually,
your scenario is supported by default :). Just go and install Exchange in one domain. As soon as you prepare other domains for Exchange recipients, you will be able to create mailboxes from all domains in your forest.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

Error when installing exchange server 2010

hi below is a copy of the error report please can someone help its doing my head in
03/11/2010 04:01:16.0648] [2] Beginning processing.
[03/11/2010 04:01:16.0742] [2] Instantiating handler with index 0 for cmdlet extension agent "Admin Audit Log Agent".
[03/11/2010 04:01:16.0757] [2] Current ScopeSet is: {Domain Read Scope: {, }, Domain Write Scope(s): {, }, Configuration Scope: {, }, Server Configuration Scope(s): {, }, , Exclusive Scope: {, }}
[03/11/2010 04:01:16.0773] [2] Resolved current organization: .
[03/11/2010 04:01:16.0976] [2] [ERROR] Unexpected Error
[03/11/2010 04:01:17.0007] [2] [ERROR] An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
[03/11/2010 04:01:17.0023] [2] Ending processing.
[03/11/2010 04:01:17.0023] [1] The following 1 error(s) occurred during task execution:
[03/11/2010 04:01:17.0023] [1] 0. ErrorRecord: An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
[03/11/2010 04:01:17.0023] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Clients.FormsAuthenticationMarkPathUnknownSetError: An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
   at Microsoft.Exchange.Management.Metabase.IisUtility.CheckSuccess(String iisAdminPath, Hresults hresult, Int32 propertyId)
   at Microsoft.Exchange.Management.Metabase.IisUtility.SetSslCertificate(String webSitePath, X509Certificate2 certificate, Boolean requireSsl)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, Boolean requireSsl, ADSystemConfigurationSession dataSession, Server server, List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
[03/11/2010 04:01:17.0023] [1] [ERROR] The following error was generated when "$error.Clear(); Install-ExchangeCertificate -services IIS -DomainController $RoleDomainController" was run: "An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.".
[03/11/2010 04:01:17.0023] [1] [ERROR] An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
[03/11/2010 04:01:17.0023] [1] [WARNING] <<< Setup failed to execute a task. Dumping all variables.... >>>
[03/11/2010 04:01:17.0039] [1] $ = $null
[03/11/2010 04:01:17.0039] [1] ? = True
[03/11/2010 04:01:17.0039] [1] ^ = $null
[03/11/2010 04:01:17.0039] [1] _ = $null
[03/11/2010 04:01:17.0039] [1] ADServerSettings = Microsoft.Exchange.Data.Directory.SetupServerSettings
[03/11/2010 04:01:17.0039] [1] args = $null
[03/11/2010 04:01:17.0039] [1] ConfirmPreference = None
[03/11/2010 04:01:17.0039] [1] ConsoleFileName =
[03/11/2010 04:01:17.0039] [1] DebugPreference = SilentlyContinue
[03/11/2010 04:01:17.0039] [1] Error = System.Collections.ArrayList {An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.; }
[03/11/2010 04:01:17.0039] [1] ErrorActionPreference = Continue
[03/11/2010 04:01:17.0039] [1] ErrorView = NormalView
[03/11/2010 04:01:17.0039] [1] ExchangePropertyContainer = Microsoft.Exchange.Configuration.Tasks.ExchangePropertyContainer
[03/11/2010 04:01:17.0039] [1] ExecutionContext = System.Management.Automation.EngineIntrinsics
[03/11/2010 04:01:17.0039] [1] false = False
[03/11/2010 04:01:17.0039] [1] FormatEnumerationLimit = 4
[03/11/2010 04:01:17.0039] [1] HOME = C:\Users\Administrator
[03/11/2010 04:01:17.0039] [1] Host = System.Management.Automation.Internal.Host.InternalHost
[03/11/2010 04:01:17.0039] [1] input = $null
[03/11/2010 04:01:17.0039] [1] MaximumAliasCount = 4096
[03/11/2010 04:01:17.0039] [1] MaximumDriveCount = 4096
[03/11/2010 04:01:17.0039] [1] MaximumErrorCount = 256
[03/11/2010 04:01:17.0039] [1] MaximumFunctionCount = 4096
[03/11/2010 04:01:17.0039] [1] MaximumHistoryCount = 64
[03/11/2010 04:01:17.0039] [1] MaximumVariableCount = 4096
[03/11/2010 04:01:17.0039] [1] MyInvocation = $null
[03/11/2010 04:01:17.0039] [1] NestedPromptLevel = 0
[03/11/2010 04:01:17.0039] [1] null = $null
[03/11/2010 04:01:17.0039] [1] OutputEncoding = System.Text.ASCIIEncoding
[03/11/2010 04:01:17.0039] [1] PID = 5088
[03/11/2010 04:01:17.0039] [1] ProgressPreference = Continue
[03/11/2010 04:01:17.0039] [1] PSBoundParameters = System.Collections.Generic.Dictionary`2[System.String,System.Object]
[03/11/2010 04:01:17.0039] [1] PSCulture = en-GB
[03/11/2010 04:01:17.0039] [1] PSEmailServer =
[03/11/2010 04:01:17.0039] [1] PSHOME = C:\Windows\System32\WindowsPowerShell\v1.0
[03/11/2010 04:01:17.0039] [1] PSSessionApplicationName = wsman
[03/11/2010 04:01:17.0039] [1] PSSessionConfigurationName = http://schemas.microsoft.com/powershell/Microsoft.PowerShell
[03/11/2010 04:01:17.0039] [1] PSSessionOption = System.Management.Automation.Remoting.PSSessionOption
[03/11/2010 04:01:17.0039] [1] PSUICulture = en-US
[03/11/2010 04:01:17.0039] [1] PSVersionTable = System.Collections.Hashtable {System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; System.Collections.DictionaryEntry; }
[03/11/2010 04:01:17.0039] [1] PWD = C:\Program Files\Microsoft\Exchange Server\V14\Bin
[03/11/2010 04:01:17.0039] [1] ReportErrorShowExceptionClass = 0
[03/11/2010 04:01:17.0039] [1] ReportErrorShowInnerException = 0
[03/11/2010 04:01:17.0039] [1] ReportErrorShowSource = 1
[03/11/2010 04:01:17.0039] [1] ReportErrorShowStackTrace = 0
[03/11/2010 04:01:17.0039] [1] RoleBinPath = C:\Program Files\Microsoft\Exchange Server\V14\Bin
[03/11/2010 04:01:17.0039] [1] RoleCustomerFeedbackEnabled = $null
[03/11/2010 04:01:17.0039] [1] RoleDatacenterPath = C:\Program Files\Microsoft\Exchange Server\V14\Datacenter
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointABCHContactService = <ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointDomainPartnerManageDelegation = <ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveFederationMetadata = <ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveGetUserRealm = <ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveRmsCertificationService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/licensing.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveRmsLicensingService = <ServiceEndpoint><Url>https://certification.drm.microsoft.com/certification/certification.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveRmsPublishingService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/publish.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointLiveServiceLogin2 = <ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDatacenterServiceEndpointRmsPremiseAuthenticationCertificate = <ServiceEndpoint><CertificateSubjectName>CN=exchangelabs.live-int.com, OU=Exchange, O=Microsoft, L=Redmond, S=Washington, C=US</CertificateSubjectName></ServiceEndpoint>
[03/11/2010 04:01:17.0039] [1] RoleDomainController = DSX4002-12.win.cxvps.net
[03/11/2010 04:01:17.0039] [1] RoleFqdnOrName = DSX4002-12.win.cxvps.net
[03/11/2010 04:01:17.0039] [1] RoleInstallationMode = Install
[03/11/2010 04:01:17.0039] [1] RoleInstallPath = C:\Program Files\Microsoft\Exchange Server\V14\
[03/11/2010 04:01:17.0039] [1] RoleInvocationID = 20100311-040116061746283004
[03/11/2010 04:01:17.0039] [1] RoleIsAdminToolsRoleInstalled = True
[03/11/2010 04:01:17.0039] [1] RoleIsDatacenter = False
[03/11/2010 04:01:17.0039] [1] RoleLanguagePacksPath = E:\
[03/11/2010 04:01:17.0039] [1] RoleLoggedOnUser = WIN\Administrator
[03/11/2010 04:01:17.0039] [1] RoleLoggingPath = C:\Program Files\Microsoft\Exchange Server\V14\Logging
[03/11/2010 04:01:17.0039] [1] RoleNetBIOSName = DSX4002-12
[03/11/2010 04:01:17.0039] [1] RolePreviousVersion = $null
[03/11/2010 04:01:17.0039] [1] RoleProductPlatform = amd64
[03/11/2010 04:01:17.0039] [1] RoleRoleName = BridgeheadRole
[03/11/2010 04:01:17.0039] [1] RoleRoles = AdminToolsRole
[03/11/2010 04:01:17.0039] [1] RoleSetupLoggingPath = C:\ExchangeSetupLogs

Hi,
  ErrorRecord: Microsoft.Exchange.Management.Clients.FormsAuthenticationMarkPathUnknownSetError: An unexpected error occurred while modifying the forms authentication settings for path /LM/W3SVC/1. The error returned was 5506.
This error is related to installing default SSL certificate on IIS.
Have a look into this to resolve it:
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_23852190.html
If it still not resolves your issue, then i would recommend to reinstall the IIS and then install the Exchange.
Regards,
Laeeq Qazi|Team Lead(Exchange + Sharepoint + BES + DynamicsCRM)
www.HostingController.com

How to install sql server 2012 using the license of sql 2014

Hello,
We want to install sql server 2012 on a server because of an application that can not work with sql server 2014.
We have a license for sql server 2014. The license is not visible for sql 2014 in our licenses because it is now included in the installation package. We also can not get a license key for SQL 2012 server now.
How can we get a valid sql server 2012 license key?
Thanks,
Gr. Peter.

Hello Peter,
This is a community forum for technical questions & issues.
For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
Regards.
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

Installing Exchange Server 2010 tools on windows 8.1

Hi Guys I'm busy installing Exchange 2010 console on my local machine but no luck.
I've added the necessary tools that are needed to install the console.
When Installing it gives me the error below.
Can anyone assist on the matter.

Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
Delete this key under Session Manager "PendingFileRenameOperations". Restart the installation and it will work fine.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to install Exchange Server 2010 with the name of my existing Domain Controller.

Similar Messages

Maybe you are looking for