How to install external speakers so they work?

Model: C875D - S7120
Part No.: PSCBEU - 01100F
I was given a set of Arctic S111 USB-powered speakers for my laptop, but I can't seem to get them to work. I plugged in the USB on the left side where I normally put the plug for my cooler. Nothing happened, the sound continued to play out of the internal speakers. I had no luck inserting the USB on the right side, either.
Am I doing something wrong or are these maybe just the wrong kind of external speakers for my computer?
Solved!
Go to Solution.

I see those speakers don't have a separate power supply. It could be that your USB ports do not supply sufficient power, but that seems unlikely. Special cables are available for that situation.
You can make inquiries here. Click on "Support" at the top.
-Jerry
Attachments:
s111_installation_manual_english.pdf ‏99 KB

Similar Messages

  • How to install external speakers to my i mac

    I got some bose companion 2 for christmas. I am unable to make them work, aghgh! help please

    does it work if you connect a  headset to the 3.5mm jack ?
    does the external speakers work with other sources?
    I swtich betweeen a skullcandy headset and altec leansing 2.1 speaker setup works great

  • How to install external speakers on Satellite L500?

    Hi
    I have just purchased Satellite L500 (PSLS6A-00X013) and have some surround sound speakers that I want to attach- please could somebody explain how to do this.
    I also would like to know do you need to unplug the computer after you have shut it down?
    I ask this as I wondered if this was then taking it's toll on the system and it would be better disconected from the power- something I never did with my desktop- but may need to do with this laptop.
    Thanks in advance- Wilma

    It will be interesting which speakers do you have exactly.
    Anyway, exact notebook specification is not known to me but as far as I know you can connect usual PC speakers (2 speakers + 1 subwoofer) using audio out port.
    Please let us know which speakers do you have exactly.
    One more thing: for digital audio output notebook must have SPDIF port with optical port.

  • EXTERNAL SPEAKERS DON'T WORK

    External speakers don't work. They are LABTEC LCS 2420 speakers. The internal speakers with RealTek driver works fine. I have an HP Pavilion 23 touchsmart All-In-One PC with windows 8. I plugged the speakers in the headphone port then tried the audio jack in the back with the same resullt. When I right click on the sound icon and click on playback devices and riight click  in the open area i checked  show disabled and disconnected devices only the speakers realtek icon appears. Do I need to download other drivers and how should I do this?

    Try the following: Control Panel > Hardware and Sound > Manage Audio Devices > in the 'Playback' tab you should see the ports (rear and headphone) > R-Click the one that you are using for your external speakers and make it the default device.
    Trust this helps.
    regards davida
    "Although I am an HP employee, I am speaking for myself and not for HP"

  • External Speakers Randomly Stop Working until I "Test" or Disable/Enable

    I'm using a HP Pavillion DV6 Notebook PC Running Windows 7 Professional 64-bit SP1.
    External speakers randomly stop working until I "test" or disable/enable them. Headphone/HDMI Audio Works.
    Background
    -Recently had to do a clean install of windows.
    -Went to the HP Drivers Website and downloaded all of the latest drivers.
    -I installed several other programs as well (Flash, Steam, Media Player, Browser)
    -The problem started
    Current Settings
    -My deafult device is "Speakers and Headphones: IDT High Definition Audio CODEC"
    -Enhancements are disabled
    -Bass and Treble are set to 4
    -Format is set to 16 bit, 48000 Hz (DVD Quality)
    -Allowing applications to take exclusive control of the device or not doesn't make a difference (but it's currently off)
    Troubleshooting
    -The audio works by plugging in headphones or using an HDMI device
    -The audio comes back if I go to my sound settings and hit "Test", or if I disable and re-enable the device
    Error Messages
    -Youtube starts the video for 3 seconds, restarts and sputters a bit, and then says that there was an error
    -My media player (MusicBee) gives me this message: "Unable to start playback (Error = BASS_ERROR_BUFLOST)"
    That's everything I can think of. Any ideas?

    Hi TheBigBoy,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having a frustrating time with the sound to your external speakers. Have you tried connecting the speakers to another computer to see if is a hardware issue with the speakers? Do the regular speakers work? What is your product number as there are several models in the dv6 series?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • External speakers suddenly stop working

    My 13" aluminum MacBook's internal speakers are working fine.  External speakers and headphones were also working fine until yesterday.  Now, external speakers do not work with my MacBook at all, and with headphones I get a very muddled, echoy sound.  This happened overnight - my laptop was just sitting, not plugged in, on my desk.  I've tried restarting and resetting the NVRAM - no help.
    I have a 13" Aluminum Unibody MacBook running OSX 10.7.5.
    Please help!

    >I had a quick look this morning and sure enough, a YouTube clip was playing, but no sound.
    This happened to me too using an Tecra A11 unit.
    The Youtube clip had no sound but if I plugged and re-plugged the headphone jack, the sound appeared again.
    I thought this was a problem with headphone jack but I wanted to check if this issue could be solved by driver reinstallation.
    Firstly I uninstalled the Realtek sound driver from the system. Then I entered the device manager and deleted the High definition Audio Controller from the System Devices area.
    In Audio , video and games controller I deleted the Intel display audio entry.
    Finally I rebooted the system.
    After new reboot the Windows recognized the deleted devices. I checked the playback tab in control panel -> sound and found new device Headphones which was not visible before.
    Then I started Youtube and checked the sound. It was available. Then I installed the newest version of Realtek HD audio driver and rebooted the unit.
    The sound was still there
    So hopefully it was just and driver issue

  • External speakers don't work with Yosemite

    I have just upgraded my iMac to Yosemite and now my external speakers don't work.
    They are there to be used under System Preferences -> Sound as "Bose USB Audio"
    But when I select them I get no sound and "The selected device has no output controls"
    I do get sound if I select the Built-in Internal Speakers
    The Bose speakers worked fine under Mavericks.
    Can anyone help me get them working again ?

    Had similar issues with Bose Companion 5 after Yosemite installation. Tried most suggestions posted here without success.
    But Birkers' post about plugging in/out analog headphones from Bose puck gave me an idea.
    1. Removed Bose USB cable from iMac (Late 2014 Retina 5K / Yosemite 10.10)
         - confirm that Bose disappears from Sound panel in System Preferences
    2. Played music through internal speakers - OK
    3. Played music through 2nd Display speaker - OK
    4. Re-connected Bose USB cable to a different USB port
         - confirm that Bose appears in Sound panel in System Preferences
    5. - Bingo! Sound now playing trough Bose system

  • After upgrading to Yosemite, my external speakers don't work.  Any clue what to do?

    After upgrading to Yosemite, my external speakers don't work.  Any clue what to do?

    System Preferences
         Sound (Make sure you have your external speaker cable or external headphones plugged in)
              Mute is selected (Uncheck Mute)

  • External speakers won't work

    The only time I can listen to music is through my Bluetooth. The external speakers don't work on my 4s. I have to start playing the song and in the lower right hand corner of iTunes it give me the option to switch between my Bluetooth or Dock Connector. When the Bluetooth isn't connected I get nothing. I've looked at every setting possible and even compared the settings to my husbands 4s. What should I do?

    Andrew Miller6...
    Are you shure that you connected it to the "headphone port"?
    That is the sound out port, as the other is an input port for a microphone.
    Other than the obvious maybe it has some incompatable tip on the jack. Test it with a known good set of headphones.
    ...Ron

  • How to install external microphone on windows 8.1 hp envy 17 17-j010ep

    how to install external microphone on windows 8.1 hp envy 17 17-j010ep
    the problem is that on the device manager sounds
    it shows the external microphone but i cannot activate it, when i do activate it stays deactivated with a down arrow red

    Hi Apedrodinis,
    I understand you are having issues with the microphone using Windows 8.1 on your HP Envy 17 17-j010ep. Here is a generic document on resolving microphone and line-in problems Windows 8.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03421813&lc=en&product=5397916&tmp...
    Hope it helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • My external speakers are not working, any suggestions?

    My external speakers are not working, any suggestions?

    try different audio or USB cables.
    try the speakers with a different computer.
    go to the speaker manufacturer's website and see if there's some troubleshooting info or a new driver that you need.
    check System Preferences > Sound > Output
    see if the speakers show up in the sound output device list
    make sure the mute box is unchecked.
    Check Applications > Utilities > Audio Midi Setup
    see if your speakers are selected in the column on the left
    make sure the mute box is unchecked

  • I phone 5S 32GB Silver's External Speakers are not working.

    Model - Iphone 5S 32GB Silver
    IOS - 7.0.6
    Problem:
    I have Recently bought Iphone 5S 32GB model & was using it wisely. Since Yesterday I have realised my Phones External speakers are not working. all other features of the phone are working properly.
    Solutions Tried So far:
    Silent Mode On/Off
    Restarting Iphone
    Reset All Settings
    Complete Iphone Erase
    Please post if anyone else is having similar issues or have solution of this problem.
    Krupal

    No it shows "Volume" not "Headphones" when I try playing music via external speakers & trying to  adjust volume.
    I have noticed one thing.
    When i tried pushing/rubbing (Gently Not too Hard) bottom right front side of my Iphone ( exactly right side to Home Button) my speaker started working again for some time.
    when it stoped again i applied same method.
    Is this some kind of loose connection ?????

  • External speakers don't work with Maverick

    My external speakers will not work in Maverick....internal speakers ok. Tried rebooting, unplugging external speakers from back of computer, etc.......going to "sound" in System Preferences, only "internal speakers" is listed. Had external sound PRIOR to Maverick.....

    Boy, do I feel like an idiot !!!  I had the speakers plugged into the input RIGHT NEXT TO the headphone port !! I could have sworn that's where I unplugged them when I did some "housekeeping" on my desk ! I even labeled that port "speakers"............I must say though that the"output" in "sound" in sys. pref. NOW SHOWS UP AS HEADPHONES !! So SORRY for taking up your time, but you got my external speakers working, and for that I am VERY grateful !!  I guess in all your experiences you've seen it all, but................THANKS AGAIN !!!! 

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

Maybe you are looking for

  • Shut Down or Sleep

    Generally speaking, is it better to shut down your Mac or put it to sleep? A recent comment made to me about, "how hard it is on computers" to regularly shut them down and then restart them has made me wonder. Thanks for your response.

  • Video In-put question

    I have an external video source attached to a microscope. The video source produces S-video. The DVI port on the macbook's are for output only? Is this correct? Is there anyway to get the image from the microscope onto the mac platform to capture pho

  • Material Provided by Customer table MKUB

    There is a table in SAP "MKUB Material Provided by Customer" My question is how is this table used? We currently manage material that our customer owns and have not yet found a good process. If there is a standard SAP process it would be great. Thank

  • Device discovery in Cisco Prime LMS 4.1

    Hi, im using CISCO PRIME LMS 4.1 for manage my network, i ran a device discovery job using a ping sweep on the ip ranges of my network, ie 192.168.1.0/24, 192.168.2.0/24 and so on... the discovery found all my devices, but it discovered duplicate dev

  • What is the best solution to create the business partners in CRM?

    Hi all, I need to migrate the business partners (general data, address, marketing attributes ) in CRM from an excel file What is the best solution to create the business partners with these informations? I tried LSMW but to enter the SALES and MARKET