How to install external speakers to my i mac

I got some bose companion 2 for christmas. I am unable to make them work, aghgh! help please

does it work if you connect a  headset to the 3.5mm jack ?
does the external speakers work with other sources?
I swtich betweeen a skullcandy headset and altec leansing 2.1 speaker setup works great

Similar Messages

  • How to install external speakers so they work?

    Model: C875D - S7120
    Part No.: PSCBEU - 01100F
    I was given a set of Arctic S111 USB-powered speakers for my laptop, but I can't seem to get them to work. I plugged in the USB on the left side where I normally put the plug for my cooler. Nothing happened, the sound continued to play out of the internal speakers. I had no luck inserting the USB on the right side, either.
    Am I doing something wrong or are these maybe just the wrong kind of external speakers for my computer?
    Solved!
    Go to Solution.

    I see those speakers don't have a separate power supply. It could be that your USB ports do not supply sufficient power, but that seems unlikely. Special cables are available for that situation.
    You can make inquiries here. Click on "Support" at the top.
    -Jerry
    Attachments:
    s111_installation_manual_english.pdf ‏99 KB

  • How to install external speakers on Satellite L500?

    Hi
    I have just purchased Satellite L500 (PSLS6A-00X013) and have some surround sound speakers that I want to attach- please could somebody explain how to do this.
    I also would like to know do you need to unplug the computer after you have shut it down?
    I ask this as I wondered if this was then taking it's toll on the system and it would be better disconected from the power- something I never did with my desktop- but may need to do with this laptop.
    Thanks in advance- Wilma

    It will be interesting which speakers do you have exactly.
    Anyway, exact notebook specification is not known to me but as far as I know you can connect usual PC speakers (2 speakers + 1 subwoofer) using audio out port.
    Please let us know which speakers do you have exactly.
    One more thing: for digital audio output notebook must have SPDIF port with optical port.

  • How to install external microphone on windows 8.1 hp envy 17 17-j010ep

    how to install external microphone on windows 8.1 hp envy 17 17-j010ep
    the problem is that on the device manager sounds
    it shows the external microphone but i cannot activate it, when i do activate it stays deactivated with a down arrow red

    Hi Apedrodinis,
    I understand you are having issues with the microphone using Windows 8.1 on your HP Envy 17 17-j010ep. Here is a generic document on resolving microphone and line-in problems Windows 8.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03421813&lc=en&product=5397916&tmp...
    Hope it helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to install Windows XP in parallel with Mac OS on a Macbook?

    Can anyone tell me how to install Windows XP in parallel with Mac OS on a Macbook?
    If I divide the hard drive into 2 patritions and install Win XP & Mac OS on each patrition, is it ok?

    I don't think he meant "Parallels", I think he just meant "parallel", with a little 'p'.
    There are three options for running Windows software on an Intel-based Mac:
    Virtualization: you can install software such as Parallels or VMWare (along with a licensed copy of Windows) which will emulate the environment necessary to run Windows software. Performance is significantly degraded, but you can work with both Windows and Mac software simultaneously.
    Dual boot: You can use Apple's Bootcamp to partition your drive and create a CD of Windows drivers for your devices, so that you can then install Windows on one partition of your drive. Your Windows software will run just as it does on any other Windows PC, but you have to reboot to switch between Windows and OS X.
    Crossover: Crossover is a product that allows you to run Windows programs in OS X without installing Windows. Not all Windows software will work with Crossover though.

  • Does anyone know how I install Microsoft office onto an I Mac or if I even need it.

    Does anyone know how I install Microsoft office onto an I Mac or if I even need it.

    If you need to write or modify documents made with Word, Excel, or Powerpoint, then you need Office. Otherwise, you don't. If you already have it then installation just involves double-clicking on the Office Installer's icon.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • PLEASE HELP! How do install Premier Elements 12 on my Mac?

    Please tell me how to install PS PE 12 on my Mac? I have no disk drive and can't find a link for installation.
    Thanks.

    Download the trial and enter your serial number into that.

  • How to install google talk and skype on mac book pro

    how to install google talk and skype on mac book pro

    Just download the application & run it. Then follow the prompts.
    http://www.skype.com/intl/en-us/get-skype/on-your-computer/macosx/

  • How to install Ricoh mp 4000 on my mac ?

    How to install Ricoh mp 4000 on my mac ?

    If you google, "ricoh mp c4000 mac" you would come up with links that would help. One of which is:
    https://discussions.apple.com/thread/2669880?start=0&tstart=0

  • How to install HP Laserjet 1020 driver for MAC 10.8.5?

    How to install HP Laserjet 1020 driver for MAC 10.8.5?  When I upgraded from Lion to Mountain Lion, my ability to print disappeared.  Where can I get a driver that works?  Thanks.

    See:
    Re: HP laserjet 1020 no driver for mac
    Re: How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

  • How do you eject speakers properly from your mac?

    How do you eject speakers properly from your mac?

    speakers (3.5 mm out) do not matter how they are removed, just unplug them and you will be fine
    when this happens, Mac Core Audio (you dont need to know about it, but an important part) will look for another output device, and your internal speakers are likely to start playing
    if you use USB or FireWire speakers, there is a possibiliy that they use some sort of strange arbitrary driver
    in that case, go to system preferences> sound> output> and select something else than the speakers in question.
    then you should be able to unplug at will.

  • How does installing Office 365 University on two macs work?

    How does installing Office 365 University on two macs work? Would i be able to install it on two macs and use them both at the same time?

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • Need help on how to install external web cam on a macbook?????

    Hi , does anyone have any idea if you can install and use an external webcam and how to install it on a macbook 13.3 in, black, 10.4.11 with intel processor. I have tried like months and months to connect my logitech web cam with no success what so ever. I been racking my brains trying to figure it out. I even called tech support by phone and they weren't really any help. They just said it can be done. I tried downloading the drivers that came in a cd with the logitech and nothing. Every time I try and use my external logitech on a site the built in one on the macbook comes on instead. There has to be a way to bypass the built on one. I know there has to be people out there using external webcams on macbooks. Any help would be appreciated.

    Centaur3 wrote:
    Hi , does anyone have any idea if you can install and use an external webcam and how to install it on a macbook 13.3 in, black, 10.4.11 with intel processor. I have tried like months and months to connect my logitech web cam with no success what so ever. I been racking my brains trying to figure it out. I even called tech support by phone and they weren't really any help. They just said it can be done. I tried downloading the drivers that came in a cd with the logitech and nothing. Every time I try and use my external logitech on a site the built in one on the macbook comes on instead. There has to be a way to bypass the built on one. I know there has to be people out there using external webcams on macbooks. Any help would be appreciated.
    I can't advise on your Logitech webcam, but I am using [this webcam|http://www.bestbuy.com/site/Dynex%26%23174%3B-+1.3MPWebcam/8703094.p?id=1199495403693&skuId=8703094]. First used on a iMac G5, OSX 10.4, then later moved to a Mac Mini OSX 10.5 (and now OSX 10.6.2 on the Mini.) I got it not because it's the best webcam, but because it was one of the few that said it worked with OSX 10.4. (Other webcams I had needed 10.5.) I have tested it on my Macbook Pro (OSX 10.5 and upgraded to 10.6) and it works, but I don't normally use it there.

  • How to connect external speakers to Satellite A100-451

    Hello,
    I have a Satellite A100-451 (UK) running Vista. I want to connect external speakers. There is a 'headphones' jack on the front (3.5mm jack I think), can I connect external speakers here? The speakers are 'PC Line' with their own power supply and also have a 3.5mm jack plug).
    Thanks
    KK

    You need the audio Line-out put and the headphone jack provides this output.
    In other words you can use this jack to connect the external speakers

  • How to Set External Speakers as Default output

    Everytime I reboot my Mac Pro, the computer defaults to the built in monitor speakers.  I have a nice set of Altec Lansing powered external speakers that I would like to use.  I have to go into system preferences and change my audio out to "Line Out" every time I want to use them.  Does anyone have a permanent solution? 

    Dunno, Brian but you could try this
    Fire up Audio MIDI, choose the default 2 channel however many bits, then Line out, then go to speakers, then test them, then click on Apply, then done. Hopefully that should fix you problem.....
    John B

Maybe you are looking for

  • Can't bookmark certain web pages. I press Ctrl-D and the "Bookmark this page" dialogue box does not appear.

    For example: If I open the home page of The New York Times and press Cntrl-D, the bookmark dialogue box appears but pressing "done" has no effect, the bookmark is not saved. If I go to a page with a particular article, then the bookmark function does

  • Getting PO number in EXIT_SAPLEBND_002

    Hello, I've put code in EXIT_SAPLEBND_002 (include ZXM06U22), and in order to trigger my release strategy I need to pass a "Y" in I_CEKKO-USRC1 if the total net value price on the PO that has been changed has increased in value or percentage over a g

  • "theme" icon

    My friend updated his n95-1's software to v20... And i notice the theme icon in the main menu doesn't exist anymore. Is it normal for v20...? I know it's not much of a problem, just curious.

  • How do I go mabout creating an MP3 version of purchased music

    How do I go about creating an MP3 copy of purchased music. I hate buying music on Itunes: you never know where it is stored on your computer and support does not cover the issue I am looking for

  • Accessing  table column names from WAD

    Hi  All,    I w ould  like  to  access  the  column names (the  Infoobject name) of a  table . Was  playing  arnd with  the API..SAPBWGetDataProviderDimensions but it  gives only characters  column name.. WAS wondering if  any of  you  has any  idea