How to install firefox3.6 on redhat linux9.0

i am using red hat linux 9.0 and by default mozilla 1.2.1 is intalled i have downloaded firefox 3.6.13.tar.bz2 and installed using tar -jxcf command but what to do next don't know
i used command ./firefox but showing error libpangocario-1.0.so.0 cannot oper

i too am interested in installing oracle parallel server under
linux.
is oscar an acceptible operating-system-dependent (osd) cluster
manager?

Similar Messages

How to install Oracle 9i on redhat 9

i have installed 4-5 times oracle 9i on linux ...but the thing is ..as soon i restart my pc..the SQLPLUS doest not start from the redhat 9 terminal
...So plz tell me the step by step procedure how to install Oracle 9i on linux ...
.... What & where is .bash_profile file is located ...???
How to create system shareable memory ...??? without this SQLPLUS is not starting ...
how to modify the kernel variables ..???
..

What & where is .bash_profile file is located ...???The file exists under oracle home directory.
# ls -l /home/oracle/.bash_profile
-rw-r--r-- 1 oracle dba 328 11? 2 15:35 /home/oracle/.bash_profile
How to create system shareable memory ? without this SQLPLUS is not starting.Append your shareable memory parameters to /etc/sysctl.conf, You might want to change these values if you have more RAM:
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.shmall = 2097152
REBOOT the system so the kernel changes can take effect, or if rebooting is not an option, you can change the kernel params at runtime by issuing:
# echo 536870912 > /proc/sys/kernel/shmmax
# echo 4096 > /proc/sys/kernel/shmmni
# echo 2097152 > /proc/sys/kernel/shmall
how to modify the kernel variables ..???method 1:
To modify kernel parameters a common way is to change /proc file system:
1. Log in as root user.
2. Change to the /proc/sys/kernel directory.
3. echo <desired list of values> > <group of parameters>
But this update is not permanent and after system reboot, your kernel parameters's
values will be the same as before.
method 2:
setuping permanently kernel parameter values ,is to use '/etc/sysctl.conf' file.
Every time the system boots, the '/etc/rc.d/rc.sysinit' script is executed
by init process. This shell script contains a call to sysctl command and
reads the values from /etc/sysctl.conf file as the ones to be set Therefore, any values added to /etc/sysctl.conf will take effect after the system boot or without downtime using "sysctl -p" command

How to install 8.17ops on redhat linux7.0

Is there anyone can tell me how to install
ops on redhat linux 7.0;
Two pc server , and share out raid disk array !
Thanks !

i too am interested in installing oracle parallel server under
linux.
is oscar an acceptible operating-system-dependent (osd) cluster
manager?

How to install Firefox3 on OEL4

Hi,
I wanted to install firefox3 in my OEL4.Currently the default firefox version is 1.5.0.3
Anyone please post the steps for this.
I tried the below workaround but it failed.
$ cd /tmp
$ wget 'http://download.mozilla.org/?product=firefox-3.0&os=linux&lang=en-US'
# cd /opt
# mv firefox firefox.old
# cp /tmp/firefox-3.0.tar.bz2 .
# tar -jxvf firefox-3.0.tar.bz2
To start firefox, enter:
$ /opt/firefox/firefox &
Post this command the default firefox version 1.5.0.3 opens
Regards,
Ashok Kumar.G

please find the output below
[root@aca811be ~]# ls -l /opt/firefox
total 16568
-rw-r--r-- 1 root root 2025 May 30 01:51 application.ini
-rwxr-xr-x 1 root root 981 May 30 01:51 blocklist.xml
-rw-r--r-- 1 root root 232 May 30 02:06 browserconfig.properties
drwxr-xr-x 3 root root 4096 May 30 02:06 chrome
drwxr-xr-x 2 root root 4096 May 30 01:51 components
-rwxr-xr-x 1 root root 45096 May 30 01:51 crashreporter
-rw-r--r-- 1 root root 3558 Mar 15 23:03 crashreporter.ini
-rw-r--r-- 1 root root 583 Jan 24 17:03 crashreporter-override.ini
drwxr-xr-x 5 root root 4096 May 30 02:06 defaults
drwxr-xr-x 3 root root 4096 May 30 01:51 extensions
-rwxr-xr-x 1 root root 3949 May 30 01:51 firefox
-rwxr-xr-x 1 root root 7476 May 30 01:51 firefox-bin
drwxr-xr-x 2 root root 4096 May 30 01:51 greprefs
drwxr-xr-x 2 root root 4096 May 30 01:51 icons
-rw-r--r-- 1 root root 476 May 30 01:51 libfreebl3.chk
-rwxr-xr-x 1 root root 292340 May 30 01:51 libfreebl3.so
-rwxr-xr-x 1 root root 30724 May 30 01:51 libjemalloc.so
-rwxr-xr-x 1 root root 602680 May 30 01:51 libmozjs.so
-rwxr-xr-x 1 root root 200736 May 30 01:51 libnspr4.so
-rwxr-xr-x 1 root root 913844 May 30 01:51 libnss3.so
-rwxr-xr-x 1 root root 304640 May 30 01:51 libnssckbi.so
-rwxr-xr-x 1 root root 119588 May 30 01:51 libnssdbm3.so
-rwxr-xr-x 1 root root 77564 May 30 01:51 libnssutil3.so
-rwxr-xr-x 1 root root 13224 May 30 01:51 libplc4.so
-rwxr-xr-x 1 root root 8684 May 30 01:51 libplds4.so
-rwxr-xr-x 1 root root 125676 May 30 01:51 libsmime3.so
-rw-r--r-- 1 root root 476 May 30 01:51 libsoftokn3.chk
-rwxr-xr-x 1 root root 181776 May 30 01:51 libsoftokn3.so
-rwxr-xr-x 1 root root 397668 May 30 01:51 libsqlite3.so
-rwxr-xr-x 1 root root 160036 May 30 01:51 libssl3.so
-rwxr-xr-x 1 root root 11816 May 30 01:51 libxpcom.so
-rwxr-xr-x 1 root root 12962304 May 30 01:51 libxul.so
drwxr-xr-x 2 root root 4096 May 30 01:51 modules
-rwxr-xr-x 1 root root 10772 May 30 01:51 mozilla-xremote-client
-rw-r--r-- 1 root root 112 May 30 02:06 old-homepage-default.properties
-rw-r--r-- 1 root root 41 May 30 01:51 platform.ini
drwxr-xr-x 2 root root 4096 May 30 01:51 plugins
-rw-r--r-- 1 root root 177 May 8 2005 README.txt
-rwxr-xr-x 1 root root 15767 May 30 01:49 removed-files
drwxr-xr-x 6 root root 4096 May 30 01:51 res
-rwxr-xr-x 1 root root 11410 May 30 01:51 run-mozilla.sh
drwxr-xr-x 2 root root 4096 May 30 02:06 searchplugins
-rw-r--r-- 1 root root 825 May 30 01:51 Throbber-small.gif
-rwxr-xr-x 1 root root 69672 May 30 01:51 updater
-rw-r--r-- 1 root root 148 Jan 4 21:06 updater.ini
[root@aca811be ~]# ls -l /usr/bin/firefox
-rw-r--r-- 1 root root 5159 Oct 25 2006 /usr/bin/firefox
[root@aca811be ~]#
Regards,
Ashok Kumar.G

How to install iAS 10g on RedHat ES 3?

Hi all
I'm quite a newcomer to Linux and Oracle iAS, and I got the task to install the iAS 10g on RedHat ES 3.
But I don't have a clue how to start and do that. Can you give me some hints?
I have the RedHat ES 3 CD's and two HP Servers (P4 with 1024mb RAM and a lot of diskspace). So I think I have got everything I need to install the iAS.
I think the first step is to install Linux on both Servers, right? But what components will I have to install?
Thanks very much for help.
Joshua

Now I found this sentence on http://www.oracle-base.com/articles/10g/OracleAS10gInstallationOnFedora2.php:
The AS10g installer checks for required packages. It will produce the following list of missing packeges:
Package gcc-3.2.3-20 is missing
Package compat-gcc-7.3-2.96.122 is missing
Package compat-gcc-c++-7.3-2.96.122 is missing
Package compat-libstdc++-7.3-2.96.122 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package setarch-1.3-1 is missing
Package sysstat-4.0.7 is missing
Package gnome-libs-1.4.1.2.90-34.1 is missing
Package libstdc++-3.2.3 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package compat-glibc-7.x-2.2.4.32.5 is missingYou can either quit and install these packages or continue with the installation as we've installed newer versions of them.
Should I just continue with the installer?
I tried "/media/cdrom/runInstaller -ignoreSysPrereqs" but the terminal tells me
The user is root. Oracle Universal Installer cannot continue installation if the user is root.I guess I have to create a non-root user, right? Is there a document about that?
Sorry for these really stupid questions, but I'm just not into linux yet...
Greetings, Joshua

How to install 10g R2 on RedHat 9!!!

hi all,
i need your help, i have more than 3 days trying installing oracle 10g Release 2 express edition on my Redhat 9 and i can not. ( do not ask me to upgrade my OS).
i tried more and more and more and more and more .......
such as this page : http://www.puschitz.com/InstallingOracle10g.shtml
and more and more......
There is a prerequest : libaio – 0.3.96, i got it and install it, the installation process completed succesfuly but when trying to open the database home page at :
http://localhost:8080/apex, firefox can not open it.
if you please give me step-by-step instructions on the installatoin process.
thnx....
Message was edited by:
user531096

Yes 'fight'.
Take RH9. Upgrade the compiler, the standard libraries, the binutils, etc. Remember that many, many, many of the packages that are installed are dependant on the standard libraries. Either you upgrade in a way that the base packages are protected - making the Oracle install painful but possible - or you upgrade to make the Oracle install easy and possibly break some/many of the other installed packages.
The solution is to use a certified version, or a clean clone.
http://www.centos.org provides free clones of RedHat Enterprise Linux 3 and 4 (RHEL), and the RedHat Enterprise is certified. For demonstrations and classes where RHEL is not available, I personally use CentOS 3 for Oracle9i and CentOS 4 for Oracle10g. Both install EXACTLY as Werner describes at http://www.puschitz.com
Ubunti, while nice, also provides some challenges with Oracle.
You see, it ALL depends on getting the supporting packages installed. Look at the Oracle Install for Linux documentation to determine the packages that are needed. Then do what it takes to get ALL those packages, at those versions installed. You can go somewhat higher, but not high enough to change the API.
Remember that the Fedora series is the 'public proving ground for new features in future versions of Red Hat Enterprise' ... a polite way to say 'public beta test'. If you chose Fedora, plan on upgrading often and pllan on having typical beta-test challenges.
And remember - it's not Oracle's fault if you decide to use a distribution that does not include Oracle's prerequisites.

How to install PCI-6111 under RedHat 7.3 ?

for realtime control useage

Hello,
Please follow the following link for more linux and daq information.
Linux/DAQ
Sincerely,
Sastry V
Applications Engineer
National Instruments

How to install redhat linux on my macbook pro marvericks osx as a dual boot

how to install redhat linux on my mac as a dual boot

I can use disk0s4 to install linux. I have already partitioned it for the vmware.

How to install weblogic and froms compiler in redhat 6

Dear gurus,
I have oracle db Version 11.2.0.1 on redhat 6 and i develop forms/reports (Forms [32 Bit] Version 11.1.1.2.0 (Production)) in windows, all the operations are working fine till I access the form through Internet explorer.
Now I want to shift only publishing form in RedHat server, i will develop forms in windows and then shift them to RedHat server so users can access forms from RedHat server.
My question is
1)What steps/installations do i need to compile forms in RedHat to make FMX file compatible to RedHat server.
2)What steps/installations do i need to publish from/reports in RedHat 6 so users can access from RedHat server.
I am not very good in all these things I always get information from internet and perform my tasks. Please help.
Thanks in advance.
M. Khurram Khurshid

Hi Khurram ,
Please follow the below doc ID and documentation :-
1)What steps/installations do i need to compile forms in RedHat to make FMX file compatible to RedHat server.
   How to Install Oracle Fusion Middleware 11g Forms & Reports Only [ID 854117.1]
   How to Install Oracle Middleware 11g Rel 1 Forms / Reports Services Only [Video] [ID 1088873.1] --> this one is good
For compilation: check the belo note:
Batch Compile Script for Forms, Reports, Libraries, Menus and also converting Binary to text and back (Doc ID 955143.1)
2)What steps/installations do i need to publish from/reports in RedHat 6 so users can access from RedHat server.
   http://docs.oracle.com/cd/E23943_01/web.1111/e10240/toc.htm
   http://docs.oracle.com/cd/E23943_01/bi.1111/b32121/toc.htm
Regards,
Prakash.

How to install d2k release 6i on redhat linux version 7.3?

How to install d2k release 6i on redhat linux version 7.3?

have you tried using open motif 2.1.30?
the open motif version that comes with the redhat 7.3 is 2.2 and is not compatible with 6i. Once I used open motif 2.1.30 it worked fine. The environment variable setting is very similar to any other unix version. Ensure that you are also intalling the latest patch (10) for 6i (fixed lots of problems).
regards

How to install jsdk on Red Hat Linux 9.0

Im new user of Linux using RedHat Linux9.0 with kernel-2.4.20-8 with /lib/libc-2.3.2.so ....
Ive downloaded both: j2sdk-1_3_1_08-linux-i586.bin and j2sdk-1_3_1_08-linux-i586.rpm.bin and execute the following commands but there was no results not even error...commands were:
chmod a+x j2sdk-1_3_1_08-linux-i586-rpm.bin ./j2sdk-1_3_1_08-linux-i586-rpm.bin
chmod a+x j2sdk-1_3_1_08-linux-i586.bin ./j2sdk-1_3_1_08-linux-i586.bin
Ive follwed the instructions of Installation notes on http://java.sun.com/j2se/1.3/install-linux-sdk.html
Now plz tell me what shuold I do and another problem is that Im trying to install JBuilder7 on Linux but its not installing and even no response when I execute the installation file..

Hi , how are you ??
I have a problem with the installation.
I had followed the step mentioned above but only the root can use java/javac.
This is my /etc/profile :
# /etc/profile
# System wide environment and startup programs, for login setup
# Functions and aliases go in /etc/bashrc
pathmunge () {
     if ! echo $PATH | /bin/egrep -q "(^|:)$1($|:)" ; then
     if [ "$2" = "after" ] ; then
     PATH=$PATH:$1
     else
     PATH=$1:$PATH
     fi
     fi
# Path manipulation
if [ `id -u` = 0 ]; then
     pathmunge /sbin
     pathmunge /usr/sbin
     pathmunge /usr/local/sbin
fi
pathmunge /usr/java/j2sdk1.4.1_02/bin after
pathmunge /usr/X11R6/bin after
unset pathmunge
# No core files by default
ulimit -S -c 0 > /dev/null 2>&1
USER="`id -un`"
LOGNAME=$USER
MAIL="/var/spool/mail/$USER"
JAVA_HOME="/usr/java/j2sdk1.4.1_02"
CLASSPATH="/usr/java/j2sdk1.4.1_02/lib:."
HOSTNAME=`/bin/hostname`
HISTSIZE=1000
if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then
INPUTRC=/etc/inputrc
fi
for i in /etc/profile.d/*.sh ; do
if [ -r "$i" ]; then
     . $i
fi
done
unset i
export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE INPUTRC JAVA_HOME CLASSPATH
What is the error .. ??
Help me please!!

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

Linux, Netscape 7.01 and java plug-in how to install?

I have J2SE v 1.4.1_01 SDK installed in /usr/java/ directory. Some days ago I installed Netscape 7.0.1 on my RedHat 8.0 Linux. Now if I try to run my simple html page which calls simple java applet, I get message to install proper plug-in. "OK" button directs me to SUN's page where I can download J2SE. But I have one.
I still don't know how to install plug-in. Trying to create symbolic link:
ln -s /usr/java/j2sdk1.4.1_01/jre/plugin/i386/ns610/libjavaplugin_oji.so libjavaplugin_oji.so
in /root/.netscape/plugins and /root/.netscape6/plugins does not resolve the problem. As You see I work as root.
My Mozilla 1.3a browser works fine. It has java plug-in installed.
I saw Netscape uses /root/.mozilla directory for storing some information rather then /root/.netscape.
Could You send me any suggestion? Thank You.

Thank You leukbr.
Unfortunately, this not resolved the problem.
More info about configuration and my activity:
I start Netscape by clicking on Netscape icon on my gnome desktop.
The icon has its file in /root/.gnome-desktop directory. File name is Netscape 7.01.desktop (like title under the icon). Line to launch executable has following contents:
Exec=/usr/local/netscape/netscape
I changed it to:
Exec=/usr/local/netscape/set_plugin_start_netscape.sh
and wrote set_plugin_start_netscape.sh file.
File /usr/local/netscape/set_plugin_start_netscape.sh has the following contents:
NPX_PLUGIN_PATH=/usr/java/j2sdk1.4.1_01/jre/plugin/i386/ns610
set |grep NPX > /root/diag.log
/usr/local/netscape/netscape
Second line is used for diagnostic purpose.
I closed all Netscape windows.
After launch of the icon /root/diag.log file is created and looks as follows:
NPX_PLUGIN_PATH=/usr/java/j2sdk1.4.1_01/jre/plugin/i386/ns610
If I start my html file (which calls java applet), Netscape still displays message:
This page contains information of a type (application/x-java-vm) that can
only be viewed with the appropriatePlug-in.
Clisk OK to download Plugin.
Hm...

How to check My linux is Redhat linux or OEL linux

HI
How to check My linux is Redhat linux or OEL linux
THANKS
SIMHA

So what about /etc/oracle-release? Is thought this is always installed when installing OEL or OL?Depends on the O/S version. You get better information by:
$ rpm -qf --qf='%{NAME} %{VENDOR}\n' /etc/*-release
enterprise-release Oracle America
oraclelinux-release Oracle America
enterprise-release Oracle America
Regarding the kernel revision numbers, that interesting, but if I take Oracle Linux 5.6 for example:
2.6.32-100.0.19.el5
I think the revision is 32-100.0.19 - Is this correct?Nope, it's *100.0.19*
CentOS seems very similar: e.g.
2.6.18-53.1.21.el5It happens.
Based on the number of digits I could not tell the difference between OL and CentOS.The best way is to ask RPM as I showed earlier.

How to install Mercurial on OEL 5.2

I'm trying to install Mercurial 1.4.2 on OEL 5.2. OEL public repository does not know Mercurial:
$ uname -a
Linux oracle.localdomain 2.6.18-92.el5 #1 SMP Fri May 23 22:17:30 EDT 2008 i686 i686 i386 GNU/Linux
$ cat /etc/yum.repos.d/public-yum-el5.repo
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/0/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/1/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/2/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=1
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/3/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_u4_base]
name=Enterprise Linux $releasever U4 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/4/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/addons/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_oracle_addons]
name=Enterprise Linux $releasever - $basearch - oracle_addons
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
yum install mercurial-1.4.2
Loading "security" plugin
Setting up Install Process
Parsing package install arguments
No package mercurial-1.4.2 available.
Nothing to do
[root@oracle mercurial-1.4.2]# yum install mercurial
Loading "security" plugin
Setting up Install Process
Parsing package install arguments
No package mercurial available.
Nothing to doIf I try to install manually Mercurial 1.4.2 using source tar ball I get:
$ python -V
Python 2.4.3
$ python setup.py install --force
running install
running build
running build_py
running build_ext
building 'mercurial.base85' extension
gcc -pthread -fno-strict-aliasing -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -D_GNU_SOURCE -fPIC -fPIC -I/usr/include/python2.4 -c mercurial/base85.c -o build/temp.linux-i686-2.4/mercurial/base85.o
mercurial/base85.c:12:20: error: Python.h: No such file or directory
mercurial/base85.c: In function 'b85prep':
mercurial/base85.c:23: warning: implicit declaration of function 'memset'
mercurial/base85.c:23: warning: incompatible implicit declaration of built-in function 'memset'
mercurial/base85.c: At top level:
mercurial/base85.c:28: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
mercurial/base85.c:76: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
mercurial/base85.c:141: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'methods'
mercurial/base85.c:150: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'initbase85'
error: command 'gcc' failed with exit status 1It seems that Mercurial requires python-dev package but I cannot find python-dev 2.4.3 package with YUM or even on www.python.org ???
Does anyone know how to install Mercurial on OEL 5.2 ?

I've been able to install Mercurial 1.3.1:
[root@lx01 yum.repos.d]# rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-3.noarch.rpm
Retrieving http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-3.noarch.rpm
warning: /var/tmp/rpm-xfer.p44eby: Header V3 DSA signature: NOKEY, key ID 217521f6
Preparing...                ########################################### [100%]
   1:epel-release           ########################################### [100%]
[root@lx01 yum.repos.d]# ls -al
total 40
drwxr-xr-x 2 root root 4096 Jan 26 20:44 .
drwxr-xr-x 95 root root 12288 Jan 26 20:31 ..
-rw-r--r-- 1 root root   954 Apr 25 2008 epel.repo
-rw-r--r-- 1 root root 1054 Apr 25 2008 epel-testing.repo
-rw-r--r-- 1 root root 1633 Jan 20 21:39 public-yum-el5.repo
[root@lx01 yum.repos.d]# vi epel.repo
[root@lx01 yum.repos.d]# yum install mercurial
Loading "security" plugin
epel                      100% |=========================| 3.4 kB    00:00
a7c94f4b4202938b3c40f4453 100% |=========================| 2.3 MB    00:09
el5_u2_base               100% |=========================| 1.1 kB    00:00
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package mercurial.i386 0:1.3.1-3.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================
Package                 Arch       Version          Repository        Size
=============================================================================
Installing:
mercurial               i386       1.3.1-3.el5      epel              2.1 M
Transaction Summary
=============================================================================
Install      1 Package(s)
Update       0 Package(s)
Remove       0 Package(s)
Total download size: 2.1 M
Is this ok [y/N]: y
Downloading Packages:
(1/1): mercurial-1.3.1-3. 100% |=========================| 2.1 MB    00:10
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 217521f6
Importing GPG key 0x217521F6 "Fedora EPEL <[email protected]>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: mercurial                    ######################### [1/1]
Installed: mercurial.i386 0:1.3.1-3.el5
Complete!Thanks.

How to install firefox3.6 on redhat linux9.0

Similar Messages

Maybe you are looking for