How to install FLEX in SAP WAS and How to deploy project into SAP EP ?

Hi.
I want to create SAP EP Contents using FLEX and I have serveral question about this.
1. How to install Flex into SAP EP and What do I have to install ?
2. When we developing SAP EP Contents using FLEX,
    Which Tool do I have to use ? (NWDS or Flex Builder)
3. After we develop contents, How can I deploy into SAP EP and
   How to create iView for Flex Application ?
Sorry for many question.
Kindly explain this.
Regads, Arnold.

Hi Arnold,
here my answers to your questions:
1) You don't need to install flex under EP, you need only adobe flash player 9 on EP
2) If you want to develop a SAP Ep cont using Flex, you need adobe flex builder 2 or 3 (ide based).
3)You can store under any EP folder (es. KM) the .swf  object and html page of FLEX application, create an iView and call the url link
or load the .swf as mime object in BSP on backend syst, include in a bsp page and create iView for bsp..
Regards
Raffaele

Similar Messages

  • How to install Flex Data Services 2 on Coldfusion MX 7?

    hello,
    How to install Flex Data Services 2 on Coldfusion MX 7?
    was is tomcat..
    I want to use RemoteObject(CFC) for oracle.
    Thanks for your support.

    Hello -
    To use mx:RemoteObject with CFC you don't even need FDS, you
    can use FlexBuilder 2.0 and use it's internal FDS SDK to build,
    compile and deploy full apps to be used in conjunction with CF 7.02
    (Flex Connectivity)
    Secondly, if you do want to install the full FDS 2.0
    enterprise software you can find the instructions to do so for J2EE
    apps servers here
    http://www.adobe.com/support/documentation/en/flex/2/install.html#flexj2ee
    HTH, Bill

  • How to install Dual OS(solaris 10 and Windows XP)?

    I have got a 80 gb sata hard disk and i am not able to install Dual OS(solaris and Windows XP ) on it.My Partitions are as follows:
    Primary partition-5GB
    Remaining are extended Partition.
    Extended partition details
    8 gb NTFS partition(installed windows XP)
    7 gb NTFS partiton(No data in it)
    20 gb NTFS partition(No data in it)
    20 gb NTFS partiton(has data in it)
    15 gb RAW partiton
    I first installed Windows xp on 8 gb Extended partiton.Then when i installed Solaris i could see only 2 partitons.One with the 5 gb and the other with the 71 gb.I actually wanted to install my solaris on the 15 gb Raw partition.Since i could not see the partition(15 gb Raw) i installed solaris on the 5 gb partition.Now when the comp boots it goes to solairs os only.i dont have the option to choose windows at all.
    could any one of you explain me how the partitions are supposed to be and how could i make it as a Dual OS.
    Saravanan
    Message was edited by:
    SaravananMandala

    Windows uses the primary partiton for boot, too, even if you installed it on the NTFS volume in the extended partition. Wherever you install Windows, it will need the primary partition for booting. You can never boot from Windows extended partitions
    As for the 15Gb raw partition, it look like what you call 'RAW partition' is actually just a small little part inside the extended partition. All your NTFS partitions (and your RAW partiton) are logical volumes and they all reside inside the extended partition. Even though Windows sees them as separate drives, each with its own drive letter, just as it sees the primary partition.
    You may try do use Windows fdisk or diskpart to delete the last logical volume in the extended partition, and then get the ntfs resize tool from Linux, or the CD1 from the Debian Linux install CDs, which has it included and accessible with a nice user interface, and resize your extended partition.
    I don't know if it works, I only used it to also resize some logical volume inside the partition. ntfs resize tool might not be easy to work with, you will need to read its documentation, but it does resize NTFS partitions (I have seen it).
    If it works, then you will have your 15Gb as unallocated space available for a new partition. Let the Solaris installer create this new partition automatically during install.
    Timothy Madden,
    Romania

  • How to install Nokia Messaging Software (Push and ...

    How to install Nokia Messaging Software (Push and Pull email) on SD CARD?
    I have got Nokia Push email instaled on NOKIA 6110 Navigator. This instalation take all of my phone internal memory, and mailbox is in phone internal memory too. How to install or move program or mailbox to SD card?

    I'm surprised that Nokia will spend all that effort to miss out on one little detail - EMAILS WITH ATTACHMENTS TAKES UP A LOT OF SPACE - The least they could do was allow us to point the application storage to the SDHC card.
    I love the messaging app, but I just can't afford to give up so much phone memory - So it is not getting installed until we can point storage to the SDHC card.

  • How come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

    how come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

    How do you mean it isn't showing the external drive?  If you mean on the desktop, click Finder on the menu bar, Preferences, General and check the boxes for Show these items on the desktop - make sure hard drives is checked.
    If you mean it is not showing in Finder or Disk Utility, make sure it is turned on, reboot and see if that mounts it so it shows up.

  • I was having issues with my 80G Video iPod and had to restore it, but now it seems all of my music on it previously is "corrupt" . How did all my songs get corrupted and how do I fix them?

    I was having issues with syncing my 80G video iPod, so I restored it, and now all my songs in my library are "corrupted" and I can't get them back on my iPod. I keep getting error(-69). How did my songs all get corrupted, and how do I fix this without having to purchase these songs all over again?

    Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time; you can see what content you can download here:
    http://support.apple.com/kb/HT5085
    You can also re-download content using an iOS device.
    For more information, see:
    http://support.apple.com/kb/ht2519
    This if course will not apply to songs you did not buy through the iTunes Store.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • I already installed parallel dekstop n microsoft windows 7 proffessional 64 bits..my question is is it the microsoft windows 7 that i installed already have microsoft office package as well? or i need to install it by myself? and how to install it?

    i already installed parallel dekstop n microsoft windows 7 proffessional 64 bits..my question is is it the microsoft windows 7 that i installed already have microsoft office package as well? or i need to install it by myself? and how to install it?

    No it does not!
    Windows and MS Office are two independent products. You will either have to buy an MS-office-license for your needs or you apply to office 365, you can activate up to 5 licenses at a time with your account and e.g. use them for the Parallels-Windows and for the native Office for Mac at the same time.
    Office 365 comes in for approx 80€ a year, so if you need more than one license it is the better deal.

  • My iphone 4s has no itunes and a new "hard of hearing" blue screen SIRI after the 6.1.3 download. Where did it go? How do i get it back? And how can i switch back to the old gray SIRI?

    Hello there,
    After the 6.1.3 download, my iphone 4s has no itunes and a new hard-of-hearing blue screen SIRI after the 6.1.3 download. Where did the itunes app go? How do i get it back? And how can i switch back to the old gray SIRI?
    Thanks,
    lost and confused

    Hello there, tonjay82.
    There are some great sources of information in the following article that might help you in resolving the issue at hand:
    iOS: Understanding Restrictions
    http://support.apple.com/kb/ht4213
    Particularly of note is the following:
    You can enable and adjust Restrictions, or Parental Controls, on your device to prevent access to specific features or content on the device. Locate these settings by tapping Settings > General > Restrictions.
            and
    Additional Information
    If your iOS device is missing a particular application or if a certain feature is not available, ensure that Restrictions are not enabled. Symptoms can include:
    App missing from the Home screen (Safari, Camera, or YouTube for example)
    Feature or service unavailable (Siri, Location Services, and so on)
    Setting missing or grayed out (such as Mail, Contacts, and Calendar; iCloud; Twitter; FaceTime)
    Important: Restrictions can also be enabled or enforced using a profile (typically installed when using the device for business or education purposes). You can check for installed profiles in Settings > General > Profiles.
    Thank you for reaching out to us at Apple Communities on this issue.
    Cheers,
    Pedro D.

  • I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
    Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
    Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
    Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
    You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
    In order to determine what compression formats wewre used in your AVI files you can
    1) Try checking the Finder "Info" window,
    2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
    3) Use a general media utility app like "MediaInfo" to read the file characteristics.

  • How do i get my buy all and how much im spending  back

    how do i get my buy all and how much im spending  back

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Was your backup copy stolen as well?

  • How do i update my mac software and how do I know which operating system I am on

    how do i update my mac software and how do I know which operating system I am on

    1. Choose About this Mac from the Apple menu to check the installed version.
    2. Incremental updates are available in the Software Update pane of System Preferences or the Mac App Store's Updates tab. The source for full version upgrades varies; 10.6 through 10.8 are in the online Apple Store, and 10.9 is in the Mac App Store.
    (95523)

  • How many types of authentications in sharepoint and how to implement those authentication in sharepoint?

    Hi All,
    How many types of authentications in sharepoint and how to implement those authentication in sharepoint?
    can any one explain the above things with examples?
    Thanks in Advance!

    In addition to
    A Sai Gunaranjan you can also check this URL for Sharepoint 2010:
    http://technet.microsoft.com/en-us/library/cc288475(v=office.14).aspx
    http://www.codeproject.com/Tips/382312/SharePoint-2010-Form-Based-Authentication
    ***If my post is answer for your query please mark as answer***
    ***If my answer is helpful please vote***

  • How to place an image in database and how to retrieve and display it in the front end

    how to place an image in database and how to retrieve and display it in the front end
    and to place an image in database and retrieve the image from database using xml
    please,help me out.

    Create a table with a Long RAW Datatype column for storing the Image Column Data.
    Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
    You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
    A save on the form saves the image in the Image item in the long raw column.

  • I forgot my security questions and I have a different email address but it's not updated to my Apple ID how can I change my security setting and how to rescue my Apple ID?

    I forgot my security questions and I have a different email address but it's not updated to my Apple ID how can I change my security setting and how to rescue my Apple ID?

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

    how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

    Hello
    For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
    Also, take a look at FTP Browser.vi, which is available at the Example Finder.
    To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
    Post your current VI if possible.
    Regards
    Mondoni

Maybe you are looking for