How to install forms 6i on the same machine oracle8i installed

I have oracle8.1.6 release 2 installed on microsocft windows 98. How do I installed forms 6i on the same machine. when I installed forms6i, it has overwritten the resgistry settings and I cannot run database any more. Please give me some ideas how to install all these on the same machine on windows 98 , operating system DOS.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Simon Jennings ([email protected]):
You need to use seperate Oracle homes.<HR></BLOCKQUOTE>
You have to install Forms6i on a different Oracle_Home not Default_Home, which I believe is where you installed Oracle8i.

Similar Messages

  • How to get form input in the same portlet using pageflow

    Hi this is premkumar
    i created 2 portlet in a portal how to get form input in the sampe portlet using
    pageflow
    help as early as possible

    Do to the complexity of the program we need to run it with sequences.  This is because we need to aquire data with DAQ until it reaches a certain point and then stop collecting so that it can do its process (only once for all times criteria is met), and then loop around till again collecting after DAQ drops back below certain point looking to once again reach that point.  Another flat sequence is going outside of this where I want to put the prompt and have a user input to affect how many times that that the inner loop is run (No a For Loop instead of the while loop will not work either for other reasons). 
    I just want to know if after the program starts you can have a user input that will change the effect of the rest of the programs action based on the number inputed.

  • How to configure multiple clusters on the same machine.

    I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
    "This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
    Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
    Thanks,
    Jacob

    FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
    Re: UDP flood hosed my LAN?

  • How to have two Firefox in the same machine?

    I have Firefox installed from the repo (Namoroka), but I also want to have another version to use exclusively with Tor.
    Downloading it from Mozilla's official website and running the executable doesn't work because it opens Namoroka. How should it be done?

    You can create a 2nd profile with: firefox -ProfileManager (you have to close all firefox instances to do that)
    Then, you can start a 2nd firefox with the new profile: firefox -P <profilename> -no-remote

  • How to sync ipod touch & iphone on same machine ?

    Greetings to all from the Greekislands !
    I'm a new member here,Bought an ipod touch 2nd gen. last year,very happy with it.Just bought an iphone 3gs 32 gb.Even happier...Hands down...iphone rocks !
    One question, my ipod touch is 16 gb,my iphone is 32 gb,I already have 20 + gb on iphone....How do i sync both from the same machine ?
    Any info much appreciated !

    Each of the panes in iTunes allows you to sync only selected playlists, ringtones, podcasts, movies, photo albums, contact groups, applications, etc. iTunes will treat your iPhone and your iPod as completely separate and distinct devices and you can sync each as you like. The choices you make for your iPod can be the same or completely different from your iPhone choices.
    I have over 5800 songs in my iTunes library, but only 1030 of them on my iPhone. I use several playlists and sync my music by choosing to sync selected play lists in the music tab.
    Several playlists never change, these are my favorites. I have another playlist that I use to cycle songs on and off the phone. I add and delete songs from this playlist frequently.
    If you haven't used playlists before, watch this video tutorial: http://www.apple.com/itunes/tutorials/#video-createplaylists
    You can also elect to manually manage your music and videos on your iPhone. Select “Manually manage music and videos” in the iPhone's summary pane in iTunes to turn off automatic syncing in the Music and Video settings panes. See “Manually Managing Content” on page 73 of the manual: http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
    I personally think the playlist method is easier, but others prefer the manual method. I prefer not to use the check and uncheck procedure as unchecked songs are ignored by iTunes for most anything.
    Here are two articles about syncing that may help you.
    Syncing Overview: http://support.apple.com/kb/HT1386
    Syncing & Merging Data: http://support.apple.com/kb/HT1296

  • Installed Oracle 8i Forms 6i & 9i Developer Suite in the same machine??

    I hav installed Oracle 8i Forms 6i & 9i Developer Suite in the same machine(on Win2k), with different Oracle homes.
    earlier it was working fine,but right now when i tried to open Form Builder(9i),it shows the error as
    Microsoft Visual C++ Runtime library
    Assertion Failed!
    Program:D:Oracle_Home\bin\ifbld90.exe
    File:ut\SRC\UTJ\SRC\UTJL.C
    Line 428
    Expression: result ==utjER_SUCCESS
    For information on how your program can cause assertion
    failure,see the VC++ documentation on asserts
    (Please try to debug the application - JIT must be enabled)
    and when i try to open Reports Builder(9i) it does not open ,it shows error as below and terminates
    rwbuilder.exe - Application Error
    The instruction at "0x6550b264" referenced memory at "0x00000000".The memory could not be "read:
    Please advise what to be done.
    Thanx in advance.

    I've got a 9i database, Jdeveloper (various versions), Oracle9i Forms and 6i Forms all installed on the same machine. Just make sure you get them in separate Oracle homes..
    Regards
    Grant Ronald
    Forms Product Management

  • How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/iPad?

    How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/ iPad?

    This isn't supported in the current version of Adobe Reader on iPhone/iPad.
    Shradha

  • How to validate multiple lines which is exist in the form builder at the same session

    Hi All,
    we are working on oracle Forms personalization to trigger the message at the point of saving multiple lines rather than requiring each line to be save individually. Currently the oracle form is allowing to user to enter two distinct lines that have same resource and basis type in BOM.
    Currently the Oracle form is allowing to enter the duplicate combination and not giving any error message even we enter the same combination of data.
    As per the customer requirement, they don’t want to validate the data while creating the records but when they try to save the form, in that case it should validate all the records at a time then need to display the appropriate message.
    Customer don’t want to customize the Oracle standard form. Here we have only option to use form personalization or through custom.pll.
    Any idea on how to validate multiple lines which is exist in the form builder at the same session as before inserting the record itself need to perform the validations for all the records.
    Thanks for your help in this regard.
    Regards,
    Thirupathi

    you can write a post script which will do the necessary tasks.
    I mean, once you are done with inserting records into these tables, exeute another procedure which will insert these "extra" records, based on some logic.
    you may not be able use DB trigger as it may generate mutating error or if you don't write it carefully, it will go into recursive loops as you are refering to same tables.
    HTH

  • How to install iFS and iAS on the same machine?

    I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
    Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
    Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
    Thanks a lot,
    Marek

    You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
    This worked for me.
    I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
    Good Luck.
    Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
    null

  • I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

    I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"
    *Select : [X] "Remember search and form history"
    See also:
    *https://support.mozilla.org/kb/Form+autocomplete
    <i>[locking thread due to the age]</i>
    If you have further questions then please start a new thread.
    *[[/questions/new start a new thread]]

  • How to retrict user cannot open the same form more than once (Forms 6i)

    Our users always open the same forms more than once. For example the customer form, the user may access a customer record in the first form, however, he will open a new customer form to edit the same record, the result is he cannot save the record because the record is locked in the first customer form.
    How can I control the user cannot open the same form more than 1 time.
    Best Regards,
    Kane

    The customer form is only an example, I found there will cause a lot of problems is I cannot control the user from calling 1 program more than 1 than within application. Sometimes a user (not good in using computer) will overlap the form for many times.....
    Is there any simple way to do that?...can I have some PL/SQL statement or build-in functions that let me easily found our what forms the user has already opened, then I can control whether I let him open this form or not.
    Urgent...please
    Thanks

  • How to use Forms 5 and DevSuite 10g in the same machine

    Hello everybody,
    I have installed forms 5 and IDS 10g in one machine and both the versions of the forms were working simultaneously. Now I have un-installed both the versions of the forms and re-installed in the same machine. Installation was successful. but I am not able to connect to the database in forms 5. It shows TNS could not resolve service name. TNS is created in both the versions with same name as well as different name. The IDS is working fine. Please help.
    Thanks and regards
    Sukanta sarkar

    Sukanto,
    What error are you getting? One potential problem you will have with more than one version of Oracle Dev Suite installed is keeping the TNSNAMES.ORA synchronized. I've found the easiest solution to this problem is to add the TNS_ADMIN registry key to each Oracle Home so I can share a single copy of the TNSNAMES.ORA file. You can add this entry by starting the Window Registry editor (regedt32.exe or regedit.exe) and navigate to the following registry hive:
    HKEY_LOCAL_MACHINE => SOFTWARE => ORACLE => HOME? (where ? represents the number of the Oracle Home, eg., 0-9).
    In your example, Forms 5 should be in HOME0 and IDS 10g should be in HOME1. Open each home and add a new "String Value" and name it: TNS_ADMIN. After you have added the new String Value entry, edit the String Value and enter the path to the copy of your TNSNAMES.ORA that is working. Then do the same thing with HOME1 and exit the Registry. You should be able to connect to your database with Forms 5 and IDS 10g. Normally, changes to the registry do not require you to reboot your computer, but I have seen where this is necessary - though not very often.
    Note: Always ensure you have a BACKUP of the Windows Registry before you make any changes. If you uncomfortable modifying the Windows Regisitry, then I don't recommend you make this change.
    Hope this helps.
    Craig...

  • How can I convince iTunes that this is the same machine to avoid installing all my iPod Touch Apps?

    I've had to rebuild my hard drive and reinstall all the software. What a pain.Now iTunes wants to tell me that I am re-syncing from a new machine and wants to reinstall all of my Apps. It is the same machine, and all the Apps show up in iTunes that are on my iPod Touch. I do not want to have to reinstall all of the iPod Apps and try to restore all of their data. How can I convince iTunes that this is NOT a different machine?

    If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
    Enable your iPod for disk use.
    See: iPod Disk Use.
    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.

  • How to bind all the components in a form to have the same property

    i have a form with components and containers arriving from many objects to it fill up, and although there is not one line of code to change the font any where the font is sometimes bold and sometimes plain in different components, same components every time though.
    so my question is:
    what is the shortest way to bind the font property of all the component and sub-components added to the form to be the same one?

    [UIManager Defaults|http://www.camick.com/java/blog.html?name=uimanager-defaults]

  • 8i Forms 6i & 9i Developer Suite in the same machine?

    I hav installed Oracle 8i Forms 6i & 9i Developer Suite in the same machine, with different Oracle homes.
    earlier it was working fine,but right now when i tried to open Form Builder(9i),it shows the error as
    Microsoft Visual C++ Runtime library
    Assertion Failed!
    Program:D:Oracle_Home\bin\ifbld90.exe
    File:ut\SRC\UTJ\SRC\UTJL.C
    Line 428
    Expression: result ==utjER_SUCCESS
    For information on how your program can cause assertion
    failure,see the VC++ documentation on asserts
    (Please try to debug the application - JIT must be enabled)
    and when i try to open Reports Builder(9i) it does not open ,it shows error as below and terminates
    rwbuilder.exe - Application Error
    The instruction at "0x6550b264" referenced memory at "0x00000000".The memory could not be "read:
    Please advise what to be done.
    Thanx in advance.

    I've got a 9i database, Jdeveloper (various versions), Oracle9i Forms and 6i Forms all installed on the same machine. Just make sure you get them in separate Oracle homes..
    Regards
    Grant Ronald
    Forms Product Management

Maybe you are looking for