How to install gpib card
I have a AT-GPIB/TNT card -Rev D and i want to install this on my PC in order to download waveform data from a recorder
Adnan,
National Instruments provides a straightfoward installation procedure for most of our GPIB boards in the more popular OS's. I would suggest going to:
http://www.ni.com/support/gpib/
From this link, you will select your board (AT-GPIB/TNT) and your OS. Follow each instruction exactly in order to minimize your chance of failure.
Ryan Mosley
National Instruments, Applications Engineer
http://www.ni.com/exchange
Similar Messages
-
How to install lan card in solaris 11
Hi,
can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
When i do ifconfig -a it only displays loop back driver only
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
The other driver was missing can please some one tell me how to install that?Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
http://www.oracle.com/webfolder/technetwork/hcl/index.html
There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work. -
How do I install sim card in my iphone. I took it out to clean and dont remembeer its placement on the sim card slide
-
Newbi needs help installing GPIB card
I "inherited" a PC at work with a Nat Inst PCI GPIB+ card in it, but
no software and I can't seem to talk to it or the HP8753 spectrum
analyzer connected to it. I installed Labview 6.1 from a CD. I
downloaded NI488 ver 1.7 from the NatInst web site, which installed
MAX. MAX sees the GPIB card in "Devices and Interfaces", but when I
click on it and "scan for instruments", I get an error, saying the
card is not configured correctly. When I go thru the configuration in
MAX, I select the board type as PCI GPIB+, but don't see any serial
number listed. Nothing I do seems to configure the card so I can "scan
for instruments" and see the spectrum analyzer.
What am I missing?Thanks for the info.I'll try it and let you know. I'll remove the
board, uninstall the software, reinstall the software, and then
install the board and see if that works. Then I'll look at BIOS stuff.
On Mon, 17 May 2004 08:28:09 -0500 (CDT), Steven B wrote:
>Hello,
>
>Well, it looks like 488.2 1.7 is the version you want to be using.
>The errors you are seeing look like they are being caused by some
>resource conflict in your PC. Here is a Knowledgebase that discusses
>some possible reasons and solutions for this to occur when using NT.
>
>http://digital.ni.com/public.nsf/websearch/D4369B86117A0E15862567A90051B27C?OpenDocument
>
>Any luck with this? What about if you try installing the same board
>in another
computer? Does it work ok then?
>
>Regards,
>
>Steven B.
>Applications Engineering
>National Instruments -
How to install new card to the existing 15454
i have new cards which is CISCO 2.5Gbps Multi-rate DataMuxponder 4ch 1558.17-1560.61 (15454-DM-L1-58.1=).
if i install to the existing system, is it will affect the system?
do i need to reconfigure the existing system using DWDM metroplanner before install the new cards?
what are the correct steps to install the new cards?
thank youHi,
Answers to
1/, no it will not affect your system as these cards are hot pluggable, and as long as you insert into the right slot (refer to the Cisco documentation)
On this Cisco web page, http://www.cisco.com/en/US/products/hw/optical/ps2006/prod_installation_guides_list.html
2/ you should not for minor card addition like this.
3/ you will find the procedure document for the applicable rel of ONS software you are running. The procedure will have a section that documents steps to install various card type.
Hope this helps.
cheers, -
Help! How to install graphics card driver?
I installed a Solaris 8 system on Intel platform with S3 Savage 4 graphics
card equipped. Seems Solaris doesn't support this card, so I downloaded a
driver file named savage_drv.o from somewhere. How can I install it
under Solaris to replace default standard VGA card I installed during
installation.
Thanksi'm in the same situation. i have solaris 8 x86 and i went to http://www.probo.com/timr/savage40.html and downloaded the savage_drv.o driver as well (because it's the only hope i've found related to running a savage4 on this platform) and i'm not sure how to go about switching out this driver for the VGA driver that's currently implemented. there are no instructions about this on the site, the only real instructions are for linux/bsd and those are pretty much no-brainers anyway.
if ANYONE knows how to do this that would be great. thanks in advance! -
How to install video card driver?
I download a video card driver, after uncompress, i have 6 files as below:
glx.so
libGL.so.1
riva_install
libGL.so
LibGL.so.1.0
XF86_SVGA
It seems that only riva_install and XF86_SVGA is executable files, so i run them. But there are some problems cause i can not continue:
1. when i run riva_install, screen displays:
Enter path to the X server tree.
If unsure, press <Enter>.
-n Path [usr/X11R6] :
Then i press <Enter>, it displays as follow:
/My_Download/VideoCard/X-GLX-libc5-i386-dyn/riva_install: test: argument expected
At this point, what should i input?
2. When i try to run XF86_SVGA, screen displays:
XF86_SVGA: Cannot find /lib/ld-linux.so.1
3. I use netscape to view webpage. Usually when i open a new page, netscape always ask me to install cookies again and agin, i press ok, and next time, it still ask the same question, even i press ok for N times to accept install cookies.
Could you please kindly answer me?
Thanks
JoannaAfter run kdmconfig, i have following description:
Video Device: NVIDIA RIVA TNT2 (32MB)
Screen Size: 16-inch (41cm)
Resolution/Colors: 1024x768 - 256 colors @ 85Hz
Which means the system recognize my video card, i don't need to install extra driver for that, right?
But how come i can't see picture clearly?
And whenever i open a new page, netscape often ask me to install cookies again and again?
Thanks
Joanna -
How to install video card - G450 for solaris8
hi everbody:
when i installed solaris 8, the supported video card driver list didn't contain the G450, so i got the patch from sun website, the driver patch looks like 109401-11,is it right?
and then how can i do next?? BTW,I still fail to install solaris8 because of missing driver G450.you can install it without the CDE,log on as root
use patchadd command to install the patch
run kdsconfig to test the the screen to see if it can work properly. Then reboot.
hope this can help.
Good luck -
How to install Bluetooth Card in imac g5 powerpc?
I have an imac G5 PowerPC with 20" screen. I didn't get a Bluetooth Card factory installed but recently decided I needed it so I bought one from a 3rd party vendor. Question is how can I install it?
I don't really care about voiding warranty, so if someone can point me in the right direction it would be most appreciated. Thanks.Thanks for the response. I guess the question I have is then if there is no way to install a bluetooth card into an iMac G5, why is this part sold? Indeed, Apple even has a part number for it.
Do I trash the little guy that I already purchase and buy a dongle (I've always wanted a dongle....)? Or is there some way to get the card installed, as (a) I don't want to sacrifice yet another USB port and (b) I already own the thing! I would take suggestions such as:
- Just bring it to a dealer and they can install it for you (helpful, if true);
or
- Ideally, the method by which the end-user can install it at the expense of the warranty (question solved) is: <Follow that link>.
Much obliged as always. Thanks for taking the time to respond.
Mark
iMac G5 PowerPC 20" Mac OS X (10.4.6) 2GB -
How to install Ethernet card on Toshiba Satellite 2105CDS.
I installed Solaris 8 on my Toshiba(Satellite 2105CDS) laptop.
I am not able to install Linksys ethernet(pci) card.
Can anyone please help me in solving this problem.
Thanking you.
John
email : [email protected]Ask Linksys for a driver.
Sadly the only supported PCMCIA (not not PCcard) device is the 3C589. I use these and they work fine.
You may need to apply the PCMCIA patch from www.xig.com -
How to install USB card in Mac OS 8.6?
Recently, i buy a new printer. the printer only can use USB connection. My MAC is MAC 8500/1800. It is no USB port. i added a USB card. But it is not work. I find information on internet. It need installed a software(USBSupport1.4.1smi.bin). I downloaded the software. But it can not open. i hope some people can help to solve the problem.
Thank you very much for your help.Hello tytom2003,
Welcome, and Happy New Year!
First, make sure your printer and USB card are Mac compatible.
Second, you will probably have to re-install your Operating System in order for your Mac to "see" your USB card. You cannot install the proper USB and USB support extensions by downloading them, because your Operating System will not "see" them, will not recognise them.
You should perform a "clean reinstall" (also known as "archive and install") from your original installation CD - or from a retail, full install CD, with the USB card installed in its PCI slot. Your Mac will now automatically "see" or recognise the USB card, and will see the need to install the USB extensions.
By doing a "clean install", you will have a newly installed System Folder and the old, disabled 'Previous System Folder' next to it. You will not lose anything, as all your old applications and documents will be saved in the 'Previous System Folder' where you may retrieve them and drag them over to your new System Folder.
I assume you are running OS 8.6, but it doesn't really matter. The OS CD will install the correct USB extensions. (An OS9 CD might install 1.4.6 extensions - whatever it installs should work).
I did not have your exact model, but rather a 7300 and several beige G3s, but the procedure is all the same.
It is also possible to do a 'Custom Install' or install by 'Tome Viewer' utility.
Let us know if it works.
I hope to have been of some help. It will have been an honour.
Jon
Message was edited by: Jon Smith -
How to install sound card sound blaster live 5.1 in hardware and software
Hello People,
I would like to know how to connect my sound card or the mother and know how to connect, but it needs some special cable? drivers also want the same and know where to connect the headphone jack and microphone.
Greetings and THANKS
Creative Sound Blaster Li've 5.1
Escribe texto o la direcci?n de un sitio web o traduce un documento. Cancelar Escuchar Leer fon ticamenteHi Angelo,
Thanks for replying. When I rebooted the system and got into
"Solaris Device Configuration Assistant" it printed out:
Windows Compatable Sound System
Sound Blaster
When I typed "prtconf", the message includes
pci, instance #0
pci8086,7190 (driver not attached)
pci8086,7191, instance #0
pci1002,88 (driver not attached)
pci8086,7110 (driver not attached)
pci-ide, instance #0
ata, instance #0
cmdk, instance #0
ata, instance #1
sd, instance #0
pci8086,7112 (driver not attached)
pci8086,7113 (driver not attached)
pci5053,3356 (driver not attached)
pci8086,c, instance #0
Is the sound card one of these?
The sound card has a Vortex II chip on it.
From the main window, I chose "Programs", "Audio",
and the error message I got is:
/dev/audioctl
Could not open stream to audio device
There is no /dev/audio file.
Thanks lot for your help.
Henry
([email protected]) -
How to install sim card in iphone
Unbelievable!! All I want to know is how to open the darn phone to change my sim card!!!! Can't find that anywhere!! We are not all 18 year old geeks who know these things from birth!!! Can't find the info anywhere!
http://m.youtube.com/#/watch?v=cjQ6O4R11AQ&desktop_uri=%2Fwatch%3Fv%3DcjQ6O4R11A Q
-
HT1695 how to install sim card
How do I install my sim card
This is covered in the manual
iPhone User Guide (For iOS 6.1 Software) -
How to install video card?
I have just received a *Mac nVidia GeForce 4 Ti 4600/Ti4600 128MB Video Card for G4* I ordered on eBay, and am seeking advice before installing.
No instructions or CD came with this item, so do I just remove the card that's in my MDD and install this one? Any slot preferred? Any drivers or firmware to update?
Also, I've read that a 300w power supply is recommended for use with this card, but I am unable to locate specs. for my machine. I assume its present power supply will suffice.
thanksso do I just remove the card that's in my MDD and install this one?
Yes.
Any slot preferred?
Use only the AGP slot.
Any drivers or firmware to update?
Remains to be seen, but OS X should support it.
I assume its present power supply will suffice.
You have either a 360w or 400w PSU in the MDD.
Maybe you are looking for
-
Compatible issues firefox v37.0.2 with att yahoo mail
6:43 PM 4/24/2015 Compatible issues firefox v37.0.2 with att yahoo mail Hello: this is my first post,hope I am doing it properly. I am using W7pro OS and ATT DSL 3.0Mbps dl I noticed this week that I was unable to save attachments from my ATT Yahoo m
-
HP Laser Jet printing problems
We have a HP Laserjet 2430 dtn - Networked . If we have more than 2 machines sending prints to the machine it doesn't pringt and waits for manual intervention i.e. asks which tray you want to print from ? - any suggestions? I have gone to each ma
-
OIM 11gR2 - Out-of-the-box Approval Workflows
Does anyone know of any good resources that describes the out-of-the-box approval/provisioning workflows of 11g R2? I have searched Google back and forth but found nothing. Some of the workflows are obvious by their name (such as default/BeneficiaryM
-
How can i navigate between windows?
Hi. Experts I want to navigate between windows.Because i am making a project of Guest House management in webDynpro.So many many screens are there to built and link.I am planning to make a single webdynpro component for it. Is this right?If yes
-
Notifying techs of users with issues
How does a tech get to know who to sort out when a ticket is assigned to him/her?I have tried to modify the ticket notification template but the tech still doesnt know who he is to sort out.Sometimes the techs are on the field and dont need to login