How to install Grid Control 10g Release 3?

Hello,
I need install Grid Control 10g Release 3 for Linux x86_64 on SUSE 9, and I need some tips about this instalation.
I need registry 3 database, 1 DB is 10g and the others are in 9.2.
Can I help me?
Thank's

If you installed the 64-bit SLES-9, you are on the only platform that has a full install of 10gR3 Grid Control available:
http://www.oracle.com/technology/software/products/oem/index.html
Everyone else must install 10gR2 fully, then patch up to 10gR3.
Run runInstaller to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
- Install the 10gR3 agent install on any additional servers that require monitoring.
Load and execute orarun to enable the correct kernel options if you not done so already. It can be downloaded from www.suse.com/oracle. Comment out any IPv6 entries from /etc/hosts. The O/S should be setup similar to the AS 10.1.2 install doc for SLES9:
http://ftp.novell.com/partners/oracle/docs/iAS10gR2_sles9_install.pdf

Similar Messages

  • Installing Grid Control 10g Release 1 - Memory Check Fails

    Hi to all,
    I'm trying to install the Grid Control 10g on a Red Hat Enterprise Linux AS release 4 . I have configured the Computer OK , but when I try to install the Grid Control, the OUI says that the system only has 1 MB of RAM. The computer has 2 GB and only 150 MB is being used, what is the problem? what can I do?
    Thanx for all.
    P.D.: Sorry for my English.

    Hi!
    Those are my kernel parameters:
    kernel.sem = 256 32000 100 142
    kernel.shmmni = 4096
    kernel.shmall = 2097152
    kernel.shmmax = 2147483648
    fs.file-max = 206067
    net.ipv4.ip_local_port_range = 32768 65000
    net.core.rmem_default = 262144
    net.core.rmem_max = 262144
    net.core.wmem_default = 262144
    net.core.wmem_max = 262144
    And those are the Kernel Parameters Requirements:
    Red Hat Enterprise Linux 4.0
    semmsl = 250
    semmsl2 = 250
    semmns = 32000
    semopm = 100
    semmni = 128
    shmmax = 536870912
    shmmni = 4096
    shmall = 2097152
    filemax = 65536
    ip_local_port_range = 1024 65000
    rmem_default = 262144
    rmem_max = 262144
    wmem_default = 262144
    wmem_max = 262144
    As you can see all the parameters are set correctly.

  • Install grid control 10g Server 2003

    Hello all;
    I have installed Oracle Grid control 10G on my PC ( server 2003 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
    Configuration assistant "OMS Configuration" failed
    The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
    I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
    oracle.sysman.emcp.agent.AgentPlugIn
    the file OMS_HOST/sysman/logs/emoms.log
    2011-04-04 09:30:20,250 [Thread-18] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2011-04-04 09:30:20,250 [Thread-18] ERROR em.notification unregisterOMS.1417 - Error unregistering: Exception d'E/S: SO Exception was generated
    java.sql.SQLException: Exception d'E/S: SO Exception was generated
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
         at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:217)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
         at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1331)
         at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:422)
         at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:330)
         at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:285)
         at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:178)
         at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:158)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:359)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1303)
         at oracle.sysman.emdrep.notification.NotificationMgr.unregisterOMS(NotificationMgr.java:1408)
         at oracle.sysman.emdrep.notification.NotificationMgr.destroy(NotificationMgr.java:1867)
         at oracle.sysman.emSDK.svc.ServiceUtil.cleanupServices(ServiceUtil.java:212)
         at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:851)
         at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5980)
         at com.evermind.server.http.HttpSite.destroy(HttpSite.java:936)
         at com.evermind.server.http.HttpServer.destroy(HttpServer.java:632)
         at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:2102)
         at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:39)
         at java.lang.Thread.run(Thread.java:534)
    the file installAction.log
    Start Processing configuration tool Enterprise manager Website Configuration Assistant ....
    Preparing for copying C:\OracleHomes\oms10g\sysman\log\* to C:\OracleHomes\oms10g\cfgtoollogs
    Expanding source path C:\OracleHomes\oms10g\sysman\log\*
    Adding the file C:\OracleHomes\oms10g\sysman\log\emctl.log from the file path expanding...
    Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.log from the file path expanding...
    Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.trc from the file path expanding...
    Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.log from the file path expanding...
    Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.trc from the file path expanding...
    Adding the file C:\OracleHomes\oms10g\sysman\log\pafLogs from the file path expanding...
    Completed copying file C:\OracleHomes\oms10g\sysman\log\emctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emctl.log
    Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.log
    Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.trc to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.trc
    Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.log to C:\OracleHomes\oms10g\cfgtoollogs\emoms.log
    Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.trc to C:\OracleHomes\oms10g\cfgtoollogs\emoms.trc
    Number of file(s) copied is 5
    Number of directories copied is 0
    End Processing configuration tool Enterprise manager Website Configuration Assistant
    Start Processing configuration tool DCM Repository Backup Assistant ....
    Preparing for copying C:\OracleHomes\oms10g\dcm\logs\* to C:\OracleHomes\oms10g\cfgtoollogs
    Expanding source path C:\OracleHomes\oms10g\dcm\logs\*
    Adding the file C:\OracleHomes\oms10g\dcm\logs\daemon_logs from the file path expanding...
    Adding the file C:\OracleHomes\oms10g\dcm\logs\dcmctl_logs from the file path expanding...
    Adding the file C:\OracleHomes\oms10g\dcm\logs\emd_logs from the file path expanding...
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool DCM Repository Backup Assistant
    INFO: Le script "C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" contient toutes les commandes qui ont échoué, ou qui ont été ignorées ou annulées. Ce fichier peut servir à exécuter ces assistants de configuration en dehors d'OUI. Vous pouvez être amené à mettre à jour ce script avec les mots de passe (éventuels) avant de l'exécuter.
    INFO: Created a new file C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands
    INFO: Since the option is to overwrite the existing C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands.bak
    INFO: Created a new file C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
    INFO: Since the option is to overwrite the existing C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands.bak
    GRAVE: OUI-25031 : Echec de certains assistants de configuration. Il est vivement recommandé de les relancer immédiatement. Une exécution incorrecte d'un assistant marqué comme Recommandé signifie que le système est mal configuré.
    1. Dans le panneau Détails de l'écran de l'assistant de configuration, consultez les erreurs à l'origine des échecs détectés.
    2. Corrigez ces erreurs.
    3. Sélectionnez les assistants ayant échoué et cliquez sur le bouton Réessayer pour les relancer.
    INFO: Sélection utilisateur : Oui/OK
    file hosts
    127.0.0.1 localhost.localdomain localhost
    192.168.2.195 srvmid1.com.tn srvmid1
    please you ca help me...

    Check if the last post in http://cn.forums.oracle.com/forums/thread.jspa?threadID=477659&tstart=0&start=15 can be the solution for you. Remember, the error is in the last step of the configuration process. So it only concerns the agent. The OMS and OMR were (as I see it) correctly configured.
    Eric

  • How to Install Grid control for 10g (WINDOWS)

    Dear All,
    This is the first time i am going to test on Grid control. i have lot of droughts from the beginning...
    what is the first step to install, database or grid control tool.(*Windows*)
    i am downloading the below software from e-delivery
    Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 1 of 2)      V15628-01 Part 1 of 2      1.1G
    Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 2 of 2)      V15628-01 Part 2 of 2      1.1G
    Is the above software containing _10g database alone_, or its with Grid control, if its with grid control kindly let me know how to install ,, kindly don't give me oracle documents. please explain me int his blog itself or some different blogs.
    Any one explain me what is the step i have to take after this,, ??
    Thanks
    Abdull
    Edited by: user9111553 on Nov 23, 2010 12:01 AM

    Hi Miguel,
    Could you help me? Full and base version of what?
    For instance, i have Oracle 10.2.0.4 version and did not check EM during instalation oracle sw. So what is the first step to install and configure Grid Control? i downloaded Grid Control and read readme file. There is information that i need to install OEM and then Grid Control. did i understand right way or misunderstood? could you show me steps for implement Grid Control with 10g on Windows?
    regards and thanks,
    rustam

  • How to install grid control agent

    Hi All,
    I have a two node rac cluster 11gr2 named rac1,rac2.And I have also installed OEM 11g on RHEL 5 on node3 i.e rac3.
    Now i want to install agents on all of the rac nodes.And i have a oracle 10g agent.
    Can anybody let me know how to install the agent and will there be any compatibility issues be there or not?

    you can start with
    How To Install Oracle 10g Grid Agent on RAC
    http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/

  • Some web pages can NOT be displayed after installing grid control 10g R3

    I deployed grid control 10.2.0.3 on Linux x86-64 platform this week, but when I tried to logon the console. the Logon page can NOT be displayed. After manually directing to home page, the page showed up. I browsed several modules and found some pages work, some not. Did anyone have the same problem on the latest R3(10.2.0.3) for Linux X86-64? I use Red Hat Enterprise Linux 4 (update 3) for AMD 64bit Blade server as the OMS and repository server.
    Really appreciate any help.

    Thanks a lot for your reply. I didn't have any problems during installation.
    Here is the files under $OMSHOME/cfgtoollogs/cfgfw
    [oracle@rman11p cfgfw]$ pwd
    /oracle/app/oracle/product/oms10.2/oms10g/cfgtoollogs/cfgfw
    [oracle@rman11p cfgfw]$ ls -ltr
    total 2668
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.sysman.top.oms_2007-04-02_03-03-55-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.sysman.top.oms_2007-04-02_03-03-55-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 CfmLogger_2007-04-02_03-03-55-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 OuiConfigVariables_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 OuiConfigVariables_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.rdbms.jazn.config_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.rdbms.jazn.config_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.oid.oradas_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.oid.oradas_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.java.j2ee.iascfg_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.java.j2ee.iascfg_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.repository.api_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.repository.api_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.iasobject_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.iasobject_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.iapptop_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.iapptop_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.iappcore_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.iappserver.iappcore_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.calypso_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.calypso_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.apache.apache_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.apache.apache_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.apache_2007-04-02_03-03-56-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:03 oracle.apache_2007-04-02_03-03-56-PM.log
    -rw------- 1 oracle dba 3816 Apr 2 14:03 CfmLogger_2007-04-02_03-03-55-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.sysman.top.oms_2007-04-02_03-05-04-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 encap_oms_2007-04-02_03-05-04-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 CfmLogger_2007-04-02_03-05-04-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 OuiConfigVariables_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 OuiConfigVariables_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.rdbms.jazn.config_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.oid.oradas_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.oid.oradas_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.java.j2ee.iascfg_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.iappserver.repository.api_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.iappserver.repository.api_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.iappserver.iasobject_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.iappserver.iasobject_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.iappserver.iapptop_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.iappserver.iappcore_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.calypso_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.apache.apache_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.apache_2007-04-02_03-05-05-PM.log.lck
    -rw------- 1 oracle dba 0 Apr 2 14:05 oracle.apache_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 491 Apr 2 14:09 oracle.java.j2ee.iascfg_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 501 Apr 2 14:09 oracle.apache.apache_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 533 Apr 2 14:10 oracle.rdbms.jazn.config_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 457 Apr 2 14:10 oracle.calypso_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 629 Apr 2 14:10 oracle.iappserver.iappcore_2007-04-02_03-05-05-PM.log
    -rw------- 1 oracle dba 580 Apr 2 14:56 encap_oms_2007-04-02_03-05-04-PM.log
    -rw------- 1 oracle dba 2635 Apr 2 14:57 oracle.iappserver.iapptop_2007-04-02_03-05-05-PM.log
    -rw-rw---- 1 oracle dba 0 Apr 2 14:59 opmn_cmd_15_59_57.log8043_ERR.log
    -rw-rw---- 1 oracle dba 29 Apr 2 14:59 opmn_cmd_15_59_57.log8042_OUT.log
    -rw-rw---- 1 oracle dba 0 Apr 2 14:59 emdeploy_cmd_15_59_57.log8045_ERR.log
    -rw-rw---- 1 oracle dba 21993 Apr 2 15:03 emdeploy_cmd_15_59_57.log8044_OUT.log
    -rw-rw---- 1 oracle dba 78 Apr 2 15:03 emca_repos_drop16_03_11.log8047_ERR.log
    -rw-rw---- 1 oracle dba 439 Apr 2 15:04 emca_repos_drop16_03_11.log8046_OUT.log
    -rw-rw---- 1 oracle dba 234 Apr 2 15:04 emca_repos_create16_04_13.log8049_ERR.log
    -rw-rw---- 1 oracle dba 1925730 Apr 2 15:12 emca_repos_create16_04_13.log8048_OUT.log
    -rw-rw---- 1 oracle dba 0 Apr 2 15:12 emctl_cmd_16_12_27.log8051_ERR.log
    -rw-rw---- 1 oracle dba 3830 Apr 2 15:12 emctl_cmd_16_12_27.log8050_OUT.log
    -rw-rw---- 1 oracle dba 78 Apr 2 15:12 emctl_cmd_16_12_28.log8053_ERR.log
    -rw-rw---- 1 oracle dba 203 Apr 2 15:12 emctl_cmd_16_12_28.log8052_OUT.log
    -rw-rw---- 1 oracle dba 156 Apr 2 15:12 emctl_cmd_16_12_30.log8055_ERR.log
    -rw-rw---- 1 oracle dba 0 Apr 2 15:14 emctl_cmd_16_14_25.log8057_ERR.log
    -rw-rw---- 1 oracle dba 1013 Apr 2 15:14 emctl_cmd_16_12_30.log8054_OUT.log
    -rw-rw---- 1 oracle dba 0 Apr 2 15:14 jsps_cmd_16_14_37.log8059_ERR.log
    -rw-rw---- 1 oracle dba 50 Apr 2 15:14 jsps_cmd_16_14_37.log8058_OUT.log
    -rw-rw---- 1 oracle dba 0 Apr 2 15:14 emctl_cmd_16_14_37.log8063_ERR.log
    -rw-rw---- 1 oracle dba 377 Apr 2 15:14 emctl_cmd_16_14_25.log8056_OUT.log
    -rw-rw---- 1 oracle dba 0 Apr 2 15:14 additonal_cmd_16_14_37.log8061_ERR.log
    -rw-rw---- 1 oracle dba 169 Apr 2 15:14 additonal_cmd_16_14_37.log8060_OUT.log
    -rw-rw---- 1 oracle dba 0 Apr 2 15:14 opmn_cmd_16_14_38.log8065_ERR.log
    -rw-rw---- 1 oracle dba 52 Apr 2 15:14 opmn_cmd_16_14_38.log8064_OUT.log
    -rw-rw---- 1 oracle dba 122 Apr 2 15:14 emctl_cmd_16_14_37.log8062_OUT.log
    -rw-rw---- 1 oracle dba 0 Apr 2 15:15 opmn_cmd_16_15_02.log8067_ERR.log
    -rw-rw---- 1 oracle dba 52 Apr 2 15:15 opmn_cmd_16_15_02.log8066_OUT.log
    -rw------- 1 oracle dba 153765 Apr 2 15:16 oracle.sysman.top.oms_2007-04-02_03-05-04-PM.log
    -rw------- 1 oracle dba 185264 Apr 2 15:22 CfmLogger_2007-04-02_03-05-04-PM.log
    [oracle@rman11p cfgfw]$

  • Error installing Oracle Enterprise Manager Grid Control 10g Release 2

    Database version: 10.1.0.5.0 with CPUApr2008
    OS: Microsoft Windows Server 2003 R2
    I'm installing R2 so I can then install R4. I get an error towards the end of the installation when it runs through the OMS Configuration.
    I get the following error:
    Configuration assistant "OMS Configuration" failed
    The "D:\oracle\product\10.1.0\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    When I open up the configToolFailedCommands file, it shows this:
    rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
    oracle.sysman.emcp.agent.AgentPlugIn
    I don't know what the oracle.sysman.emcp.agent.AgentPlugIn does. Can anyone help me out with this???
    Thanks,
    ivalum21

    Here is the error in the "installActions<date>.log" file:
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    I checked in the details section and it listed this as the issue:
    Configuration assistant "OMS Configuration" failed
    The "D:\oracle\product\10.1.0\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
    How do I fix this?? When I open up the configToolFailedCommands file, all it lists is "oracle.sysman.emcp.agent.AgentPlugIn".

  • Install Grid Control on Solaris

    Hi all,
    I am trying to install grid control 10g release 4 onto my database homer.
    It bounces back with an error:
    ==========================================================
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.9
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 4279 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 5542 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY v
    ariable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    =============================================================
    i have tried searching within the otn & metalink. was not able to find any solutions.
    regards
    Susan John

    Hi Susan
    Are you using a X11 emulator like Exceed ?
    Or let me know if you are using another X11 emulator.
    then try this:
    Solution Description
    Exceed 6.0.1:
    - Run Xconfig (Start->Programs->Exceed->Xconfig)
    - Double-Click "Video"
    - Set
    Server Visual: PseudoColor
    - Reset Server as proposed by Xconfig
    Exceed 7.1.0:
    - Run Xconfig (Start->Programs->Hummingbird Connectivity V7.1->Exceed->Xconfig)
    - Double-Click "Screen Definition"
    - Set
    Server Visual: PseudoColor
    - Click OK
    - Double-Click "Protocol"
    - Uncheck "Use 32 Bits Per Pixel For TrueColor"
    - Reset Server as proposed by Xconfig
    Otherwise directly on Solaris please control that :
    Check if the monitor has minimum 256 color.
    Run the following command from the Operating System command line
    COLOR=`/usr/openwin/bin/xwininfo -root 2>&1`
    if [ `echo $COLOR | grep -i depth | awk '$2>=8 {print "good"}' | grep -c "good" ` -ge 1 ]
    then
    echo "Adequate"
    elif test -z "$DISPLAY"
    then
    echo "DISPLAY is not set"
    elif [ `echo $COLOR | grep unable | wc -l` -ge 1 ]
    then
    echo "Cannot open DISPLAY"
    else
    echo "Need at least 256 colors"
    fi
    Edited by: Hub on Oct 29, 2008 11:50 PM
    Are you able to use
    /usr/openwin/bin/xdpyinfo
    what's the result of that command?
    Are you able to open xterm or xclock without any issues?
    Edited by: Hub on Oct 30, 2008 12:00 AM

  • Steps to install Oracle grid control 10g on windows

    dears ,
    kindly I need to install oracle grid control 10g release 5 on windows
    so please if any one have a detailed step-by-step document for that post it to me ASAP
    Regards.

    Hi;
    Please check below link
    Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
    http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
    http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
    Regard
    Helios

  • EM Grid control 10G installtion problem ........

    I m trying to install EM grid control 10G release 2, it prompt error on OMS configuration:
    Failed status
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
    INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall  have completed with exitCode=206
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
    'opmnctl: starting opmn and all managed processes...
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
    '================================================================================
    opmn id=testpc:6201
        5 of 6 processes started.
    ias-instance id=EnterpriseManager0.testpc
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
        HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=7112)
        failed to start a managed process after the maximum retry limit
        Log:
        e:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
    INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
    INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
    INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
    config tools failed command
    rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
    oracle.sysman.emcp.agent.AgentPlugIn
    Pl suggest remedy
    Thnx

    13/10/23 09:34:58 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
    13/10/23 09:36:38 10.1.2.0.2 Started
    13/10/23 09:36:38 10.1.2.0.2 Started
    13/10/23 09:36:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:37:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:37:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:38:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:38:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:39:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:39:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:40:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:40:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:41:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:41:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:42:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:42:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:43:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:43:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:44:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:44:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:45:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:45:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:46:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:46:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
    13/10/23 09:47:20 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
    13/10/23 09:48:59 10.1.2.0.2 Started
    13/10/23 09:49:00 10.1.2.0.2 Started
    13/10/23 09:49:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
    13/10/23 09:49:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
    13/10/23 09:50:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
    13/10/23 09:50:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
    13/10/23 09:51:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
    13/10/23 09:51:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
    13/10/23 09:52:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
    13/10/23 09:52:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605

  • Installing Grid Control on uncertified CentOS system

    I'm trying to install Grid Control 10g on a CentOS machine. I realize that centos is not supported, but isn't there a way to get around the dependency checks?
    I already tried the hack of adding "redhat-5" to the [Certified Versions] section of the oraparam.ini file (as outlined here: Re: Oracle 10g won't isntall on Enterprise Lunix OS ) and that gets me past the initial check, but eventually the install fails with the following:
    ./runInstaller -silent -responseFile=/u01/app/oracle/software/grid/em_with_new_db.rsp -waitforcompletion -paramFile /u01/app/oracle/software/grid/oraparam.ini
      Performing check for CertifiedVersions
      Checking operating system requirements ...
      Expected result: One of redhat-3,redhat-4,SuSE-8,SuSE-9
      Actual Result: redhat-CentOS release 5 (Final)
      Check complete. The overall result of this check is: Failed <<<<
      Check complete: Failed <<<<
      Problem: Oracle EnterPrise Manager 10gR2 is not certified on the current operating system.
      Recommendation: Make sure you are installing the software on the correct platform.Isn't there a way to trick the install into proceeding?

    Did you ever get Oracle Grid Control installed on your CentOS machine? I am trying to install using the -ignoreSysPrereqs flag, but run into issues during the OMS and AGENT configurations.

  • Installing Grid Control - Solaris - Containers - VM(Veritas)

    I need to know how and where I can start to learn how to install Grid Control using Solaris with containers, and Veritas VM to create and mantain filesystems.
    Please help.
    Paola.
    @}-->-->>-----

    Hi Paola,
    Check this link....
    http://download-east.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

  • Installing Grid control with existing IAS

    Is it possible (and how) to install Grid control into existing Application Server installation? Or integrate it somehow?

    yes u can install Grid control into existing Application Server installation

  • When to install Grid Control and when to just use 10g built in?

    1. is Grid Control really the only way to Enterprise Manage multiple databases? (if not, how do i switch from different databases on the 10g built in EM)
    2. I only have about 10 databases, is Grid Control overboard?
    3. Is it a bad or good idea to install GC on the 10g server?
    thanks,

    Hi.
    As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
    The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
    The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
    Good luck.
    rgds
    Kjell Ove

  • OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

    Hi every one,
    i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
    I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
    here is i am getting the error:
    details says that are as follows
    oui-25031 oracle.sysman.emcp.agent.agentplugin,
    so i followed the steps and drop the sysman user with cacade option
    again i got the same error,
    Environment:
    Microsoft Windows XP Professional SP3,
    Oracle 10G 10.2.0.1.0 (Already Installed)
    Dell Inspiron 530
    Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
    have enough hard disk.
    Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
    i have seen the error messages in this forum many are on unix environment.
    any views on windows operating system?
    Thank You.

    hi,
    before you install grid, try and patch the database to a later release, 10.2.0.4
    had this issue in work and patching the db resolved the issue.
    I did install database software only, then patch then create database, then install grid
    regards
    Alan

Maybe you are looking for

  • How to make an URL link in tabel connected to text or image?

    I have a tabel with cells. in each cell is a picture and the name of twitter accounts. Just like a Vcard Now I want to link the image or/and the accountname to the webpage of that twitter account. This doesn't seem to work in the normal link way opti

  • Microsoft Word 2011

    I recently updated my operating system to Mountain Lion. I've noticed that I am unable to open up Microsoft Word 2011 since the update. All of the other components of Office 2011 for Mac (Excel, PowerPoint, etc.) open and function normally. I also co

  • Food for Points

    Points for good cause. https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82 a®

  • Problem in creating HTTP alias in WAS

    Hi, i have followed the steps to create the http alias mentioned in the below link [Creating an HTTP Alias in WAS] when i click on the HTTP Provider in visual administrator, "Error while loading service HTTP provider" is displaying.  after that i hav

  • IDoc - Segment details for Confirmation Code in ME22N

    Hi Friends, I am doing Purchase Order Acknowledgement(855) - Inbound Scenario. I need the ConfirmationCode and Confirmation ControlKey fields in the segement of basic type ORDERS05. We couldnt find these two fields in the segments, can any one help m