How to install hard drive into mac pro

how to install hard drive into mac pro

I recently bought a new 2TB internal sata drive for my Macpro.
The installation was easy, but I'm not sure what to do next.
For one, should I partition the drive?
My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
I hope this makes sense! Your help is much appreciated!

Similar Messages

  • Install external drive into mac pro

    I have stored my itunes library on an external hard drive and now that i have purchased a mac pro i would like to install the external hard drive into the mac pro and continue to use the drive for the library. The external drive is a deskstar in an enclosure that i can just slide it out of so i can install it in the mac pro. Will this work or is there a better way?

    Turn off the option in the Advanced section of the iTunes preferences to copy the files to the iTunes music folder, and then drag the folder into the open iTunes window. This will not preserve playlists and other metadata.
    (35337)

  • How to access hard drive on mac pro desktop from laptop?

    I sold my Mac monitor and wireless keyboard. Now I want to sell my Mac Pro Desktop, but I need to wipe the hard drive first. How can I turn it on and access the drive from my Mac laptop?

    It will show up as a drive, you can just access the drives on the desktop provided you turned on disk sharing. You can't access the "desktop".. If you had previously turned on screen sharing then you could use that via network connection.
      If you can find the file that has preferences and then edit it then you can change to startup in Target disk mode. I do not know the file or how to edit it.
    GSC818 wrote:
    If I can start it from the button, then can't I connect to my laptop via firewire or Ethernet and would it show up as an external drive? Then I could change the startup disk in the preferences panel on my laptop. Would that work?

  • How to replace hard drive in macbook pro?

    How to replace hard drive in macbook pro?

    Hi S,
    If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions.

  • Installing SATA (parallel?) hard drive in mac pro

    is there a way to install my old ATA (is this called parallel) hard drive into my mac pro? i know i can't put it in one of the SATA slots, but how about the second drive bay or something?

    While the screws fit into hard drive screw threads they're largely useless as the mounting holes for a 5.25" optical drive do not match that of a 3.5" hard drive. If you want to do any screwing in on the drive you will at a minimum require a 3.5" to 5.25" conversion bracket. Even then the mounting can be tricky do to the short cable and likely misalignment and the connector to that of the optical drive above it.
    While the installation of a drive is not difficult the mounting of it, especially if you want it nicely done, can very well be.

  • Installing new hard drive in Mac Pro - question about compatibility.

    I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
    http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
    Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

    Any SATA drive
    About urls:
    http://www.amazon.co.uk/gp/product/B0036Q7MV0/
    is all that is needed.
    For a bit more, WD1502FAEX WD Black 1.5TB
    http://www.wdc.com/en/products/internal/enterprise/

  • Old hard drive, new Mac Pro?

    My G5 power supply died so I bought a new Mac Pro. Can I install the old G5 hard drive into my new mac pro and boot up??
    Thanks, beth

    If you have a G5 that uses SATA drive then you can install it however you will not be able to boot from it. If you have a PATA drive then you can always install it in the 2nd optical drive bay but you need tohe right brackets to have it secure.

  • How would install iWeb on my mac pro.

    I'd like to install iWeb on my mac pro. When I download the install, it tells me I can't install because i don't have a version. I know I don't have iweb on my mac. I want to know if and how can i install iweb on my mac pro. I'm running os 10.7.5. thanks

    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    OT
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Can I format an IDE Hard Drive from Mac Pro?

    I use a mid - 2012 Mac Pro; run Mavericks OS X 10.9.2.
    1. Can an IDE hard drive (using an external drive) be formatted to 10.9.2, from my Mac Pro using Mavericks? (the IDE hard drive is new/unformatted).
    2. Once formatted to 10.9.2, can I reformat the IDE hard drive to Mac OS X Leopard 10.5.8, from my Mac Pro using Mavericks?
    3. If so, would should I do to accomplish Question # 2 above?

    The version of the OS that is running  is not relevant to formatting the drive. When you format a drive in any OS, you should select "Mac OS extended journaled." (That is, unless you plan to share the drive with a Windows computer.) Formatted this way, the drive can be used with any version of Mac OS.
    You do not have to reformat the drive each time you connect it with a different OS.

  • How to install iCloud on my Mac Pro.

    I want to install iCloud on my Mac Pro. I updated the software as requested and opened systems preference but I cant seem to find the iCloud icon. How do I add my Mac Pro to my iCloud devices? Thank you in advance for your help...
    V

    Open the Mac App Store and try purchasing Mountain Lion 10.8. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Core 2 Duo(not Core Duo) or better CPU with at least 2GB of RAM, and if it does, phone the online Apple Store and order a download code for Lion 10.7.
    A Mac Pro(not MacBook Pro) with at least 2GB of RAM automatically meets the requirements for Lion.
    (89983)

  • How to Install New Internal Hard Drive on Mac Pro Laptop

    My wifes 15 in Mid 2010 lap top running 10.8.4 has run out of drive space so we bought a new 1tb drive to install. We aren't sure where to go from here. The current contents are back up on Time Machine, but we also bought a small hard drive enclosure to take out the current hard drive and put it in the small enclosure.
    So...do we install the new 1tb drive into the laptop and then try and start from the original hard drive that is now in an enclousure...then "Copy" or "Migrate" the material from the original hard drive to the new on? If so...how is that done?
    Or do we try and "Copy" or "Migrate" the hard drive materials backed up on Time Machine? If so...how do we do that?
    Thank you!

    After formatting the new hdd, while still outside the mac, make a clone of your internal disk with CarbonCopyCloner on the new (still external) disk: CCC will ask you to install the Recovery Partition also, do that, and then the clone.
    Then you eject the new drive, shutdown, and then you open the mac take the original disk out, and put the new one in.
    On the OWC and other sites you will find instructions how to do the switch. Be very careful with the connectors inside .

  • How to reformat a hard drive in Mac Pro

    Hello,
    I know how to do the whole disk utility thing to reformat it but can I just plug the hard drive right into the bay in the computer and run disk utility?
    Thanks!

    Well, I would recommend shutting down the Mac Pro first…
    Then install your new Hard-Drive / Start Up and reformat the drive.

  • Going into my hard drive causes mac pro to lock up like fort knox

    Hi, I have been a mac user for just a hair over a year.(Apple will not help me with anything)
    All has been swell until now.
    If I go into my hard drive my computer locks right up. I can do
    nothing to move it along. The only option I have is to hold down the
    power button for six seconds, which kills me and the computer a little
    each time. I booted up the computer using the mac install disc and I
    used disk utility to "repair" the disk. It reported the disk was "OK".
    I thought swell, and went into documents on the hard disk and it
    locked my computer up again. I let it sit there for an hour and
    nothing moved. apple/option/esc does not do anything. I went into time machine and
    went to the documents there and it locked up the computer too. I went into finder and went to documents and it locked up the computer. I went into other areas of the hard drive and it locked up the computer. The funny thing is I can go on the internet, use programs, read email, and everything works fine. Can anyone guide me in
    the right direction in solving this problem I am facing?
    Specs:
    Model Name: Mac Pro
    Model Identifier: MacPro2,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 8 MB
    Memory: 8 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP21.007F.B06
    SMC Version: 1.15f3
    troubled drive:
    ST3750640AS P:
    Capacity: 698.64 GB
    Model: ST3750640AS P
    Revision: 3.BTH
    Serial Number: 5QD1P*
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Bay Name: "Bay 1"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 698.32 GB
    Available: 328.75 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    second drive:
    SAMSUNG HD753LJ:
    Capacity: 698.64 GB
    Model: SAMSUNG HD753LJ
    Revision: 1AA01112
    Serial Number: S13UJ1CQ6***
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Bay Name: "Bay 2"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Boot OSX:
    Capacity: 128 MB
    Writable: Yes
    File System: HFS+
    BSD Name: disk1s3
    Mount Point:
    <Edited by Moderator>

    Sounds like itneeds some good basic maintenance and troubleshooting. Stop using this drive. Start trashing temp files, and off loading good files.
    Everytime you freeze and do a hard restart, the chance that the journal, directory, file system and data are compromised increases, in spite of the "OKAY" from Disk Utility's repair routines it is not reliable. And leads to false sense of security. Disk Utility only checks the basic directory, not the files themselves.
    It may be something like a damaged Finder plist/preference, or worse, but either you look for an easy fix, or just start cleaning up and moving files and system to a good drive and system.
    You may have bad blocks on your drive causing all this. Or not. TechTool can detect bad sectors, but not map them out. (Deluxe is part of AppleCare; or Pro, commercial version).
    Start using SuperDuper if you don't already, and Disk Warrior, premiere for disk repairs.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    What you need to be doing is rebuild your system from the foundation up.
    You may need to check out Data Rescue II demo from Prosoft Engineering to recover files.
    I would begin by installing OS X on another drive, or restoring from TimeMachine. Create/name an "emergency" boot drive partition. Doesn't need to be that large. Keep it handy just for doing repairs and maintenance. Keep another as a clone of your working system and backup - in addition to TimeMachine.
    You may want to start by erasing the drive (not just the OS volume) with a 7-way write (not just zero all, it does NOT do a reliable safe job mapping out bad blocks) and restore from TimeMachine. Or work with a new drive.

  • Cant install mountain lion on a new hard drive 2011 mac pro 17"

    for some reason I bought the infamous 2011 mac pro, and the hard drive kept having IN/OUT problems and after it destroyed half day of work, I decided to get a new hard drive, *blue WD 500g" but i have tried EVERYTHING and i just cant install mountain lion on it.
    1.- i tried forcing the recovery mode so It would connect to the internet and download mountain lion but after 10 min or so i trows the -2002f error at me
    2.- I tried to use the old hard drive that i put on a external hard drive reader so I could get the recovery partition but i just keep restarting the installation no reason given
    3.- downloaded the mountain lion and tried to installing it on the system hard drive of the laptop trough a computer running snow leopard but dosn't let me.
    4.- tried the same thing on target mode without success
    5.- using the recovery partition I used disk utility to se of the partition was locked but it was not
    6.- created a different partition to see if it would install it  there didn't work.
    i just don't understand why
    any toughs?
    if you answer this you would be a personal hero of mine
    cheers

    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • How to install hard drive Macbook Pro 10.6.3

    I have a Macbook Pro Os X 10.6.3 Snow Leopard. I was told that I have a failed hard drive. It costs about $195 for repair at my local shop. I read that I can purchase my own hard drive from BestBuy and have geek squad to install it. The guy says it costs $50 for installation but about $180 to reinstall the system. My question is....is there a good link you could give me for directions to how I can install my own hard drive? Also, when he says install the whole system, what does that mean. I already have my installation disks that came with my Mac. The hard drive that's currently in my Mac is a Western Digital 250GB. Thanks in advance!!!

    Thanks for your reply. I let it run and it eventually said that Mac OS X can't be installed on the computer. And that the installer could not install the necessary support files. This was all done on a brand new hard drive and was the exact error given on my previous hard drive. (The one that  I was told had failed). I tried installing from a clone of the CD on a USB but it stalls at the blue screen and eventually has a rotating cursor. Do you recommend anything further?? I would appreciate your help, greatly.

Maybe you are looking for