How to install hardware for windows 7

I cannot find drivers for peripherals and I cannot connect to the Internet because drivers for wi-fi and ethernet are not available

You need to download the drivers from the Apple website while booted into OSX. Burn the drivers onto CD and then, boot into Windows.
Install the drivers from CD. Do you have an external CD drive for your MacBook Air?

Similar Messages

  • How to install itune for windows 7

    I have a problem install itune for windows 7. Please help.....
    After installing itume 10.2.2 64-bit, It prompt me "Apple Application Support" is require to download itune.
    Info:
    Model: Sony vaio
    Windows 7 Home Premium
    Rating: 3.2
    Processor: Intel(R) Core(TM) i3 CPU [email protected]
    Memory: 2.00GB
    System: 64-bit Operating System

    It prompt me "Apple Application Support" is require to download itune.
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • How to install drivers for windows 7 from bootcamp

    how to install bluetooth driver for windows 7 (bootcamp)?

    make the usb stick or cd disc from osx bootcamp with all the apple drivers
    start windows
    navigate the usbstick or disc and install the bluetooth drivers

  • How to install driver for Windows 8.1 without physical connection

    I have a Photosmart 7762 printer connected to a NAS box (with wiring all very difficult to get to behind various office units) and want to be able to print to it from a new Windows 8.1 PC that is installed (again with difficult to get to wiring) in a separate room but on the same network.
    The HP site for the printer says I have to use Windows Update to get the driver, but this only works if you physically connect the printer to the PC which isn't an easy thing to do in this case.
    Does anyone know where I can get hold of the driver so I can use the "Have Disk" option? I have been unable to find it anywhere. Alternatively, does anyone know how to copy the driver from an existing Windows 7 install (on a laptop I could connect it to) and whether that would work?
    This question was solved.
    View Solution.

    Hi,
    Folow the steps listed under Download the driver for later use or use on another computer below, it will allow downloading the INF and installing those manually, be sure to follow the link to Microsoft which explain how to locate the correct package and extract it:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03470332&DocLang=en&docLocale=en_US&...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to install CS3 for windows on a macbook pro

    I bought the software before I bought my first macbook. I did install this software myself a few years ago, but can't remember/figure out how! Please help.

    First you have to install Windows. Then you can install the software.

  • How to use itunes for windows server 2003

    how to install itunes for windows server 2003

    Purchased music from the iTUnes store is in a "AAC protected" format. It can only be used in iTUnes. Any music you buy online these days will have some protection on it where you can only use it in there program.
    The way around this is to burn the purchased songs to a CD in iTUnes. Then goto edit>preferences>advanced tab>Import sub tab and set your import settings to something like MP3.
    Now put the burned CD back in the PC and "Re"import it into iTunes so its imported in a MP3 format so you can use it in any program. Before importing it tho you need to manually add the name of the song, artist album ect ect

  • How to install RAC on windows

    Can anyone tell me step by step how to install RAC on windows advanced server. I want to know whether RAC must need Microsoft Clust Service. When I create a cluster with clustersetup.exe, I'm told that it's need oracle partition, but I don't know how to make it.
    thanks advance!

    Hi, I am Nirmal ([email protected]) Please try this out
    Requirements:
    H/W: External shared hdd
    RAM: 256 MB
    OS:win Advance server ,win 2000
    PATCH:
    The Windows CFS and Clusterware Patch for 9.2.0.6 -- available in Metalink under Patch number 3973928
    The 2.2.0.18.0 Oracle Universal Installer -- available in Metalink under Patch number 2878462
    The 9.2.0.6 RDBMS patchset -- available in Metalink under Patch number 3948480
    1.Install shared disk array.
    2.Install cluster interconnect and public Network hardware
    a)Create two entries of NIC-Ensure Public IP listed at the top and private IP should be listed below the public IP.
    b)Inter connection between two nodes are connected by switch.
    3.Ensure the IP/Hostname of all node is entered in hosts file.
    4.Ensure the temp /tmp directories are same accross all node.
    5.Ensure that all nodes have same local admin name which has full access on the oracle home drive and win home drive.
    6.Run the final clustercheck which is available in patch 3973928 which will check the above process if any incorrect it will indicate.(Location is 3973928\Disk1\preinstall_rac\clustercheck subdirectory).
    7.Prepare the Logical Drives in Windows dont format or give any drive letter.
    8.Install and Configure Cluster software with RAW Datafile.
    a)Install oracle home on NTFS partitions and Datafile on Shared Logical Partition.
    9.Run Oracle cluster setup wizard.
    a)Click clustersetup command line.
    b)A welcome page launches click next.
    c)Create a cluster. click next.
    d)Choose "user private network for interconnect" and click Next.
    e)Network config page appears, enter the cluster name. then enter the public hostname for all nodes. Accept the default or change as appropriate for your cluster configuration. click next.
    f)Cluster file system option page appears. Choose No Cfs. click next.
    g)Disk config page appears. Click "Create Oracle Symbolic links button" label as srvcfg to the partition we have created.
    h)Oracle Object link Manage window appears:
         1)From symbolic Link column, select an empty row.
         2)Type in the desired datafile link name and hit enter to save
         3)click apply button to commit.
         4)When the progress bar at the bottom of the screen stops      moving choose close.
    i)VIA Detection screen appears. Choose yes or no depending on your config.(VIA-Virtual Interface Architecture).
    j)Install location screen appears. its default win_home\system32\osd9i accept .click finish.
    k)Cluster setup window appears if no error it will complete and close automatically.
    l)Check the serices,
         1.oracleobjectservice
         2.oracleCMService9i
    (if any error check the error log)
    10.Install the 22018 OUI
    a)home oracle_home.
    b)Click all nodes and install.
    11.If necessary install RDBMS Software into oracle home.
    RAC Database using DBCA::
    a)Create listeners using Net configuration assistant on each node
    b)Run DBCA from command prompt.
    c)Welcome page displays with the selection to create a cluster or
    single instance database. choose oracle cluster database. next
    d)Operation page is displayed. choose create database. Next.
    e)Node selection page. Select all nodes. Next.check OracleGSDService
    is running on all nodes.
    f)Database Templates page is displayed. Choose new database. next.
    g)Database Identification page. Enter the Global Database name and
    SID (oracle will register SID prefix with a number, this will
    become the SID of each node.)
    h)Option page for java and inter media database. Choose according to
    your need.
    i)Connection option select dedicated or shared server .
    j)Initialization parameter page. Add required values.
    k)Database storage window.(ensure the storage information points to
    the symbolic links specified in cluster.)
    l)Creation page displayed, click finish.
    m)DBCA summary page click create database and ok.
    Note:
    1)During Java creation it may slow down or hang. Check the CPU
    usage and at 95-99% it will slow down please wait check the log.
    2)ORA-29807 error may come. Ignore it its a (bug 2925665).
    3)alter installation run the script prvtxml.plb, utlrp.sql
    4)Any other error please check the alert log.
    Message was edited by:
    user474717

  • I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
    directly for serial number issues.

  • I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

    I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."  I just trying to get the latest version of iTunes.  Thanks

    "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • How to install itune under Windows XP 64-bit professional with SP2?

    I have iPhone 3GS for over a year and I have set it up at my work computer (Windows XP professional) with latest iTune and it work great. Recently our IT has upgraded our system and all of our new machines has Windows XP 64-bit OS.
    I can't figure out how to install iTune under Windows XP 64-bit, to synch with my e-mail, contact and calendars any more?
    Can any one help?

    New machines? With XP 64-bit? Your IT department is being rather foolish, in my opinion, deploying new installations of XP 64 since Microsoft discontinued mainstream support for it (more than two years ago) and it's never really been satisfactory.
    Anyway, there is no version of iTunes that supports the 64-bit version of Windows XP and almost certainly never will be. If you search the iTunes for Windows forums for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete. Connecting to iPhones is one of the most problematic issues.
    Regards.

  • HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

    I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

    Go back to Boot Camp: on the 2nd page you get this:
    Download the support software and as Windows is already installed uncheck the 2nd box.

  • How to install extension for all users?

    How to install extensions for all users? I'am using Windows
    Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
    administrator" doens't work.

    Xych wrote:
    > How to install extensions for all users? I'am using
    Windows Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
    administrator" doens't work.
    You may have to log in as the Administrator user rather than
    "run as adminstrator".
    Beyond that, are there really enough users on a system that
    they can't install the extension(s) they need themselves?
    Danilo Celic
    |
    http://blog.extensioneering.com/
    | WebAssist Extensioneer
    | Adobe Community Expert

  • Outlook 2010 won't open after installing icloud for windows

    Hi,
    Installed icloud for windows at work this morning after moving my MM account to icloud at home on my MBP.
    Installed ok but after ticking the mail, contacts, calendar and bookmark boxes on icloud for windows Outlook 2010 starts but won't open and stays on the "Processing..." for a long time before I close it.
    Also the icloud for windows control panel won't reopen except the time it opens after installation. I have tried removing it and rebooting but after it's installed, if you close the control panel it won't reopen although it's still running in Task Manager. Closing it in Task Manager and restarting doesn't make a difference.
    Currently I removed, rebooted and reinstalled and only have the bookmarks ticked and outlook works ok but the control panel still won't reopen.
    I am on a exchange server so don't know if this is part of the problem. Not real worried about mail but would like calendars working again.
    Very thankful for any help you can offer.

    I had the same problem after successfully moving from MobileMe to iCloud yesterday on my PC, ipad and iphone.
    Today I couldn't open Outlook 2010. An Outlook dialogue box for my MobileMe email account kept asking for the email password, and although I put the password in, it kept re-appearing.
    I turned off Norton spam temporarily, because I noticed Outlook was stuck processing the Norton plug ins at opening, and managed to open Outlook but the programme crashed every time I tried to access my email account settings (I thought I would try to delete the MobileMe email account).
    I then opened the Control Panel for iCloud and unchecked the Mail with Outlook box, which has enabled Outlook to work again. The @me.com email account was gone when I checked the email accounts. I never needed to use the @me.com email account anyway.
    How frustrating and such a waste of my time.
    Does anyone know what difference it makes if the MobileMe/iCloud email is not connected to Outlook? Does it really make any difference when you have your email accounts in the iPad and iPhone anyway?

  • My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    It won't pass 10.3.
    What does this mean?
    I figured it out. Thanks!!!
    What did you figure out? How about posting how you resolved it?

  • How to install Workshop for WebLogic and WebLogic Portal?

    Hi All,
    I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
    Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
    As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
    we need to install the Workshop for WebLogic and WebLogic Portal.
    Please suggest me where should i get the required environments/IDE?
    Thanks,
    Harish.

    Hi Harish
    1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
    http://www.oracle.com/technology/software/products/wlp/index.html
    2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
    3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
    4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
    5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
    6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
    Here are the links for quick start guide for portal development. Please do refer them.
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
    HTH
    Ravi Jegga

Maybe you are looking for