How to install hp deskjet 3900 in windows 8

Please let me know how to install hp deskjet 3900 in windows 8

Hi, take a look at this HP link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

  • How do I install HP Deskjet 5700 on Windows 7?

    When trying to install I got an error message saying my computer's Operating System is not supported.

    Hi Redbone7.
    I understand you're looking for instructions on how to install your Deskjet printer now that you have a new hard drive. I'd be happy to help you with this!
    In order to find you the right drivers though, I do need to know which model of Deskjet you have and if you're using Windows or Mac. Once I know those two pieces of information I will be able to post back with either a link to the drivers or a link on how best to install your printer.
    I look forward to hearing back from you, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How to install Hp deskjet 3050 Jobs software on Windows 8.1 Desktop putter

    how to install Hp deskjet 3050 J610 software on Windows 8.1 Desktop HP Pavillion

    Hello @dougz ,
    Welcome to the HP forums.
    I understand that you would like to know how to install your deskjet 3050 software onto your Windows 8.1 desktop.
    It should be as easy as installing the printers driver. Just download the software and follow the on screen prompts. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • How to install a fresh copy of windows xp with sp2 on a msi k8t neo

    My specifications:
    CPU: AMD ATHLON 64 - 3000MHZ
    MOTHERBOARD: MSI K8T NEO
    RAM: CRUCIAL MICRON 1024MB DDR
    HDD: WD 120GB ( C: 60GB, D: 60GB )
    HDD: SEAGATE 4GB ( E: 4GB )
    DVD: NEC 3520
    CD: SONY
    The system is on drive C:
    primary master HDD 4GB ( on drive E: )
    primary slave NONE
    secondary master CDR DVD-RW
    secondary slave CDR SONY
    and last HDD 120GB on primary raid ( on drive C: and D: )
    NONE on secondary
    I have 2 floppy disks: on the first one it says G72-PRSA060, Promise 376/378 Driver, Disk 1 of 1
    on the second one it says G72-VASA040, VIA SATA RAID Driver, For VT6420/VT8237, Disk 1 of 1
    Can please someone tell me how to install a fresh copy of windows xp on my computer from scratch? All I know that I have to press F6 at some time and insert one of the disks but I don't know which one. And I don't know when to insert a second disk.
    Thanks for helping me

    Yeah.  I remember when I had that board.  I found the best SATA ports were the Promise ones, but...
    What do you think, Tiresmoke?  You had the same board too if I'm not mistaken.

  • How to install adobe flash player in windows 8?

    how to install adobe flash player in windows 8?

    Windows 8 includes Flash Player for IE. You can update it through WIndows update. If you're unsuccessful, download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)

  • How to install adobe pagemaker 7 in windows 7

    how to install adobe pagemaker 7 in windows 7

    Pagemaker 7 has compatibility issues with Windows 7. You can try, but I expect the installer will not work properly.
    Either move on to InDesign or keep PM7 on your WinXP setup.
    You can also try run the application in Xp compatible mode.

  • How to install internet explorer 8 in windows 8 pc.

    how to install internet explorer 8 in windows 8 pc.

    Hi,
    Internet Explorer 8 is not compatible to install in Windows 8/8.1 PC.
    As Rob suggested, we could use Internet Explorer 10 (In Windows 8) or Internet Explorer 11 (In Windows 8.1) developer tools to emulate IE8,
    Using the F12 developer tools; Or build a Virtual Machine.
    Besides, here is the download page:
    Internet Explorer 8
    http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx
    Best regards
    Michael Shao
    TechNet Community Support

  • How to install ios back i have windows 7?

    how to install ios back i have windows 7

    I don't understand your question.  You mention iOS (iPhone, iPod Touch, and iPad OS) but you say you have Windows 7, and not which of the devices you want to upgrade to iOS 7.  Your question about installing iOS 7 is probably best asked on one fo the forums for your iOS device, like the iPhone, iPad or iPod Touch forums.

  • How can install adobe flash player for windows 8 pro internet explorer

    how can install adobe flash player for windows 8 pro internet explorer
    how can instal flash player for internet explorer metro ui 
    where can i watched video tutorial for this or help me please

    I can't tell from the screenshot, but it's possible you are running in the Metro version.  Could you try this page using Internet Explorer in desktop mode to see if that helps?
    right click in the browser and click the tools button
    In the menu that appears, select "view on the desktop"
    Once IE launches in the window, do you see your Flash content?

  • How to instal developer forms6.0 on windows 98

    sir,
    may i know how to instal forms 6.0 on windows 98 with full information.

    Keith you maybe facing an issue with trying to install Photoshop CS2 on Windows 7 in general.  If you have both serial numbers registered, and one of them is a full version, then you can request that your software be unlocked to allow for installation.  Our support team will better be able to determine your eligibility for this.  You can contact them via chat at http://adobe.ly/yxj0t6.

  • How to install AdobeAIRSDK 2.7 on windows 7(help)

    How to install AdobeAIRSDK 2.7 on windows 7 on flash cs5 ver11

    Thanks.
    2011/9/21, chris.campbell <[email protected]>:
    chris.campbell http://forums.adobe.com/people/chris.campbell created the
    discussion
    "Re: How to install Air 2.7 on mac ?"
    To view the discussion, visit:
    http://forums.adobe.com/message/3927906#3927906

  • How to install Cisco Device Manger on Window 7

    Hello
    Is Cisco device manager supported on windows 7 ?
    If yes how to install Cisco Device Manger on Window 7?
    Please advise
    Thanks
    Chetan R

    You can install the latest DCNM 5.x  for support, please see here:
    http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp179665
    Support for Windows 7 and Windows 2008
    In Cisco DCNM Release 5.1(3u), the Cisco DCNM server supports Windows 2008 and the Cisco DCNM client support Windows 7.
    You can download the DCNM from the Software Download. Device Manager is bundled in DCNM.
    For DCNM-SAN installation please see here:
    http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/installation/guide/inst_troubleshoot.html
    I hope this helps.
    Carlos

  • Kindly provide me how to install odi in my pc windows 7 64bit

    Hi all,
    Plz kindly provide me how to install odi in my lap windows 7 64bit and do we have option to install odi in windows7?
    In windows 7 i already installed oracle 10g database and downloading ODI 11.1.1.5.0 version from oracle site.
    Its a urgent process to me and thanks in advance and guide me .

    Hi,
    for Windows x64 be aware of these pitfalls:
    - you need the "generic" Java version of ODI, not the Windows one (which target x86)
    - you need a 64 bit Java Virtual Machine to run the setup
    - you need a 32 bit Java Virtual Machine to run the application (ODI Studio) after installation complete
    I used JRockit (Java Virtual Machine), and with default settings the JRockit installer overwrite previous installations, even for different processor architecture (ie 32 bit installation overwrite 64 bit).
    So to me the following worked:
    - Install JRockit 64 bit
    - Run ODI installation
    - Install JRockit 32 bit
    - Run ODI Studio.
    Hope it helps,
    Corrado

  • How to install HP Deskjet 990cxi on my new laptop running Windows 7 Home Premium on an AMD 64

    I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor.  I want to do two things:
    to set the printer up to run direct from a USB port on my laptop.  Having done this, I then want
    to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
    So far under windows, this has proved a huge problem.  It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install.  I get the following message: "Printer driver was not installed.  Access is denied  ".  Yet I am loading the printer drivers as Administrator.
    By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.  
    Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
    Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly.  I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
    So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial?  Can HP do anything about this?
    Terence Keeler B.Sc (Hons) LLM
    Freshwater, Isle of Wight, UK

    JJMack <[email protected]> wrote:
    =============
    JJMack  created the discussion
    "when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
    To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

  • How to install HP Deskjet 990cxi printer on laptop...

    I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor.  I want to do two things:
    to set the printer up to run direct from a USB port on my laptop.  Having done this, I then want
    to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
    So far under windows, this has proved a huge problem.  It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install.  I get the following message: "Printer driver was not installed.  Access is denied  ".  Yet I am loading the printer drivers as Administrator.
    By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.  
    Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
    Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly.  I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
    So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial?  Can HP or BT Customer Service do anything about this?

    This might help:
    I had huge problems with my HP Laserjet 5M on getting a Homehub 3.0 - I'd used a Sky router before and had similar problems at the start with that. The BT Homehub is a very poor piece of equipment and the BT support staff (in India) are absolutely useless, they try to help and got me to allow them to remotely go on my screen and control my computer - so I could see exactly what they were doing - the computer equivalent of a bogbrush to a blocked bog - not impressive and 2 days and over 2 hours on the phone got me nowhere.
    Finally found the instructions - or similar I'd used some years ago on the Sky hub:
             Instructions on how to set a LaserJet 5M for IP address use on a network. Other printers models may may be similar.
             This is necessary on Mac OSX 10.6+ due to the loss of Appletalk support which made it much easier to configure with Default.
             • Press Menu, repeatedly, the following messages appears on the control panel: HP MIO MENU
             • Press ITEM. - CFG NETWORK=NO* will appear.
             • Press the PLUS button once. - CFG NETWORK=YES* will appear.
             • Press SELECT .
             • Press ITEM repeatedly until CFG TCP/IP=NO* appears.
             • Press the PLUS button. CFG TCP/IP=YES* will appear.
             • Press SELECT.
             For DHCP based IP addressing:
             • Press ITEM until BOOTP=YES* appears.
             • When using BootP or DHCP, keep the setting BOOTP=YES*. If set to BOOTP=NO*, then press the PLUS to change it to BOOTP=YES.
             • Press SELECT to set, then GO.
             • The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect.
             • No other TCP/IP configuring is necessary.
             • Print a self-test page to verify the IP settings.
             • Press Menu until TEST MENU appears.
             • Press Item until PRINT SELF TEST is displayed.
             • Press SELECT .
             • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
             When set for BootP the lower right corner of the test page display something like:
             TCP/IP STATUS: READY
             HOST NAME: 192.168.2.10
             CONFIG BY RARP/BOOTP
             IP ADDRESS: 192.168.2.10
             SUBNET MASK: 255.255.255.0
             DEF. GATEWAY 192.168.2.1
             SYSLOG SERVER: NOT SPECIFIED
             IDLE TIMEOUT (SECONDS): 90
             SNMP GET CMTY NAME: ALL
             SNMP SET CMTY NAME: NONE
             BOOTP/DHCP SERVER: 0.0.0.0
             If you want to set the printer to a static IP address:
    ALSO if you do NOT have a JetDirect follow the instructions below:
             • Press ITEM until BOOTP=YES* appears.
             • Press the PLUS button. BOOTP=NO will appear.
             • Press ITEM . IP BYTE 1=192 will appear.
             • Press the PLUS or MINUS button until the value of the first byte of the IP address appears on the control-panel display.
             • Press SELECT to set that byte.
             • Press ITEM to continue.
             • Repeat to configure the remaining bytes of the IP address you wan to set. e.g., IP BYTE 2=168 , IP BYTE 3=2, IP BYTE 1=10) = 192.168.2.10
             • Repeat Steps to configure the subnet mask bytes (SM BYTE 1=255, SM BYTE 2=255, SM BYTE 3=255 , SM BYTE 4=0) = 255.255.255.0
             • Repeat Steps to configure the syslog server IP address (LG BYTE 1=0,LG BYTE 2=0, LG BYTE 3=0, LG BYTE 4=0) = 0.0.0.0 (Mine had the BYTE 4=1 and only when I reset it to BYTE 4=0 did everything go correctly).
             • You can leave this at 0.0.0.0 if not needed.
             • Repeat Steps to configure the default gateway (GW BYTE 1=192, GW BYTE 2=168, GW BYTE 3=2, GW BYTE 4=1) = 192.168.2.1 (often it is automatically set by your router and you do not have to do anything other than check this is correct).
             • Configure the timeout (TIMEOUT=90). You can leave the default at 90 seconds.
             • Press GO .
             • Print a self-test page to verify the IP settings.
             • Press Menu until TEST MENU appears.
             • Press Item until PRINT SELF TEST is displayed.
             • Press SELECT .
             • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
             When set to a static value it looks something like:
             TCP/IP STATUS: READY
             CONFIG BY FRONT PANEL/TELNET
             IP ADDRESS: 192.168.2.10
             SUBNET MASK: 255.255.255.0
             DEF. GATEWAY 192.168.2.1
             SYSLOG SERVER: 0.0.0.0
             IDLE TIMEOUT (SECONDS): 90
             Add the printer.
             • To add the printer on Mac OSX 10.6+, open the Printer & Fax Preference panel.
             • Unlock if locked.
             • Press + to add.
             • Select HP JetDirect - Socket from the Protocol pulldown menu.
    BUT if you do not have a JetDirect then click the Line Printer Daemon – LPD option instead.
             • In the address field, enter the IP address from the Test Page printout.
             • Print Using should set itself to LaserJet 5M from the built-in drivers in Mac OSX 10.6+ within a few seconds if it can communicate with the printer.
             • Type in a name you want to give the printer. It will use its IP Address as the name if nothing is entered.
             • Type in a location if you desire. Not sure where this shows up.
             • Press Add.
             • The Installable Options are determined and the printer is added.
    NOTE – ref users without a JetDirect:
                      • If you get a message telling you the printer is busy – you have probably indicated JetDirect or Internet Printing Protocol - IPP option in the Protocol pulldown menu by mistake – delete the printer and go back and reset it with the Line Printer Daemon – LPD option instead.
    Good luck.

Maybe you are looking for