How to install hp deskjet 920c printer?

I was trying to install this printer, but the macbook doesn't take the software

Is this what you're trying to install? This is the latest Mac driver for the 920C. Note that it was last updated in 2007 for OS X 10.5, and there may be no version of it that's compatible with OS X 10.6 or later. If that's the case, you may need to replace the 920C with a more modern printer.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=33996&prodTypeId=18972&prodSeriesId=28856&swLang=8&taskId=135&swEnvO ID=4019

Similar Messages

  • How to install HP Deskjet 990cxi printer on laptop...

    I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor.  I want to do two things:
    to set the printer up to run direct from a USB port on my laptop.  Having done this, I then want
    to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
    So far under windows, this has proved a huge problem.  It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install.  I get the following message: "Printer driver was not installed.  Access is denied  ".  Yet I am loading the printer drivers as Administrator.
    By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.  
    Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
    Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly.  I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
    So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial?  Can HP or BT Customer Service do anything about this?

    This might help:
    I had huge problems with my HP Laserjet 5M on getting a Homehub 3.0 - I'd used a Sky router before and had similar problems at the start with that. The BT Homehub is a very poor piece of equipment and the BT support staff (in India) are absolutely useless, they try to help and got me to allow them to remotely go on my screen and control my computer - so I could see exactly what they were doing - the computer equivalent of a bogbrush to a blocked bog - not impressive and 2 days and over 2 hours on the phone got me nowhere.
    Finally found the instructions - or similar I'd used some years ago on the Sky hub:
             Instructions on how to set a LaserJet 5M for IP address use on a network. Other printers models may may be similar.
             This is necessary on Mac OSX 10.6+ due to the loss of Appletalk support which made it much easier to configure with Default.
             • Press Menu, repeatedly, the following messages appears on the control panel: HP MIO MENU
             • Press ITEM. - CFG NETWORK=NO* will appear.
             • Press the PLUS button once. - CFG NETWORK=YES* will appear.
             • Press SELECT .
             • Press ITEM repeatedly until CFG TCP/IP=NO* appears.
             • Press the PLUS button. CFG TCP/IP=YES* will appear.
             • Press SELECT.
             For DHCP based IP addressing:
             • Press ITEM until BOOTP=YES* appears.
             • When using BootP or DHCP, keep the setting BOOTP=YES*. If set to BOOTP=NO*, then press the PLUS to change it to BOOTP=YES.
             • Press SELECT to set, then GO.
             • The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect.
             • No other TCP/IP configuring is necessary.
             • Print a self-test page to verify the IP settings.
             • Press Menu until TEST MENU appears.
             • Press Item until PRINT SELF TEST is displayed.
             • Press SELECT .
             • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
             When set for BootP the lower right corner of the test page display something like:
             TCP/IP STATUS: READY
             HOST NAME: 192.168.2.10
             CONFIG BY RARP/BOOTP
             IP ADDRESS: 192.168.2.10
             SUBNET MASK: 255.255.255.0
             DEF. GATEWAY 192.168.2.1
             SYSLOG SERVER: NOT SPECIFIED
             IDLE TIMEOUT (SECONDS): 90
             SNMP GET CMTY NAME: ALL
             SNMP SET CMTY NAME: NONE
             BOOTP/DHCP SERVER: 0.0.0.0
             If you want to set the printer to a static IP address:
    ALSO if you do NOT have a JetDirect follow the instructions below:
             • Press ITEM until BOOTP=YES* appears.
             • Press the PLUS button. BOOTP=NO will appear.
             • Press ITEM . IP BYTE 1=192 will appear.
             • Press the PLUS or MINUS button until the value of the first byte of the IP address appears on the control-panel display.
             • Press SELECT to set that byte.
             • Press ITEM to continue.
             • Repeat to configure the remaining bytes of the IP address you wan to set. e.g., IP BYTE 2=168 , IP BYTE 3=2, IP BYTE 1=10) = 192.168.2.10
             • Repeat Steps to configure the subnet mask bytes (SM BYTE 1=255, SM BYTE 2=255, SM BYTE 3=255 , SM BYTE 4=0) = 255.255.255.0
             • Repeat Steps to configure the syslog server IP address (LG BYTE 1=0,LG BYTE 2=0, LG BYTE 3=0, LG BYTE 4=0) = 0.0.0.0 (Mine had the BYTE 4=1 and only when I reset it to BYTE 4=0 did everything go correctly).
             • You can leave this at 0.0.0.0 if not needed.
             • Repeat Steps to configure the default gateway (GW BYTE 1=192, GW BYTE 2=168, GW BYTE 3=2, GW BYTE 4=1) = 192.168.2.1 (often it is automatically set by your router and you do not have to do anything other than check this is correct).
             • Configure the timeout (TIMEOUT=90). You can leave the default at 90 seconds.
             • Press GO .
             • Print a self-test page to verify the IP settings.
             • Press Menu until TEST MENU appears.
             • Press Item until PRINT SELF TEST is displayed.
             • Press SELECT .
             • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
             When set to a static value it looks something like:
             TCP/IP STATUS: READY
             CONFIG BY FRONT PANEL/TELNET
             IP ADDRESS: 192.168.2.10
             SUBNET MASK: 255.255.255.0
             DEF. GATEWAY 192.168.2.1
             SYSLOG SERVER: 0.0.0.0
             IDLE TIMEOUT (SECONDS): 90
             Add the printer.
             • To add the printer on Mac OSX 10.6+, open the Printer & Fax Preference panel.
             • Unlock if locked.
             • Press + to add.
             • Select HP JetDirect - Socket from the Protocol pulldown menu.
    BUT if you do not have a JetDirect then click the Line Printer Daemon – LPD option instead.
             • In the address field, enter the IP address from the Test Page printout.
             • Print Using should set itself to LaserJet 5M from the built-in drivers in Mac OSX 10.6+ within a few seconds if it can communicate with the printer.
             • Type in a name you want to give the printer. It will use its IP Address as the name if nothing is entered.
             • Type in a location if you desire. Not sure where this shows up.
             • Press Add.
             • The Installable Options are determined and the printer is added.
    NOTE – ref users without a JetDirect:
                      • If you get a message telling you the printer is busy – you have probably indicated JetDirect or Internet Printing Protocol - IPP option in the Protocol pulldown menu by mistake – delete the printer and go back and reset it with the Line Printer Daemon – LPD option instead.
    Good luck.

  • How do i install HP deskjet 3510 printer without the disk to my laptop

    how do i install HP deskjet 3510 printer  without the disk to my laptop 

    Hi,
    You can download from the following link:
       http://h20000.www2.hp.com/bizsupport/TechSupport/P​roductList.jsp?lang=en&cc=us&taskId=135&prodTypeId​...
    Full Feature Software and Drivers is the one you definitely need first.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2?

    How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2? Several attempts with various downloads from Apple and Samsung sites have failed. Any help is higkly appreciated. Thanks in advance!

    Thias is what I find in system information:
    Samsung Scanner:
      Version:          2.01.12
      Erhalten von:          Apple
      Zuletzt geändert:          10.04.14 21:20
      Art:          Universal
      64-Bit (Intel):          Ja
      Signiert von:          Software Signing, Apple Code Signing Certification Authority, Apple Root CA
      Ort:          /Library/Image Capture/Devices/Samsung Scanner.app
      Informationen:          Copyright (C) 2013 Samsung Electronics Co., Ltd.

  • How to install hp deskjet 3900 in windows 8

    Please let me know how to install hp deskjet 3900 in windows 8

    Hi, take a look at this HP link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How to install Hp deskjet 3050 Jobs software on Windows 8.1 Desktop putter

    how to install Hp deskjet 3050 J610 software on Windows 8.1 Desktop HP Pavillion

    Hello @dougz ,
    Welcome to the HP forums.
    I understand that you would like to know how to install your deskjet 3050 software onto your Windows 8.1 desktop.
    It should be as easy as installing the printers driver. Just download the software and follow the on screen prompts. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • How to install samsung scx-4200 printer/scanner on yosemite?

    How to install samsung scx-4200 printer/scanner on yosemite?
    iam not able to install the drivers for samsung scx-4200 printer/scanner
    is there any method for wifi print from my mac air to samsung scx-4200 printer/scanner

    Try SpliX, it works ok.

  • How to install HP DeskJet printer on Solaris8

    I have a HP DeskJet 880C, how to install and shared from my Solaris 8 platform?
    Thanks everyone....

    I was successed install it, but there is "no response" when I have printed document.
    command: lp -d hp1<printer name> document

  • Trying to install HP Deskjet 2642 printer...not working

    I have tried to download HP Deskjet 2642 printer multiple times, however at the end of the installation, it tells me that the installation failed because the (path, or list of folders) doesn't exist or I don't have access to it. How do I fix this?!
    A similar situation happened when I downloaded a game from a website that I paid for. It wouldn't let me open it because I was denied access to (some file).
    I have an XPS 18.

    mllarwoo,
    The only printer I could find with the information you provided is the HP Deskjet 400 C2462. 
    A trip to the
    Windows Compatibility Center shows that it is in fact supported by Windows 8.1, which is good to know before continuing.
    Based on the error message you’re getting, it’s possible that the files are saving to a folder in which you don’t have the appropriate permissions to access due to not being an administrator. 
    You should try downloading your file(s) directly to your desktop, or even the Downloads or Documents folders. 
    Once they are completely downloaded, right-click on the file and select ‘Run as administrator’.
    If you get prompted for administrative credentials you most likely aren’t logged in as an administrator. 
    Without being logged in as an administrator or providing administrative credentials, you won’t be able to perform tasks such as installing new software.
    Mike
    Windows Outreach Team – IT Pro

  • How to install hp deskjet 1000 with out the disk, we lost the disc

    hp deskjet 1000 printer j110a need to know how to install without the disc to my laptop

    brew31 wrote:
    how can i install printer without the diskPlease read this post then provide some details.  What printer model? What operating system?  Do you have a 32 bit or 64 bit version?  In general you can click "Support and Drivers" at the top of the page, enter your product number, select the specific model, then select the proper operating system.  Next look for an appropriate driver, typically the full featured driver will be the one to download.  Save the download and once the download has completed run the installer.  If you have a USB printer you should not connect the printer until instructed to by the installer.

  • TS4062 how to connect hp deskjet d1660 printer to my ipad air

    how do you connect a hp deskjet d1660 printer to my ipad air

    Hi,
    Do you have the CD which came with the printer ? Using the CD and run setup on a computer. Select wireless, the process will do the rest.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to install a tcp/ip printer

    How can I install a tcp/ip printer on my powerbook G4

    What is the make/model of this printer? Does it have a built in ethernet print server?
    In general terms - you open the Printer Setup Utility, click to Add a new printer, select "IP Printing", select the type of IP Printing protocol you want to use, enter the IP address of the print server, and then select the printer driver.

  • How to install Epson Stylus C88  printer on 10.9.3?

    How do I install Epson Stylus C88+ printer?  Is it supported by 10.9.3?

    Hi Janet ...
    There is a driver available for v10.9 Mavericks to download here >  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58602&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X9
    After you download the driver, open System Preferences > Printes & Scanners then select the Print tab.
    Then click ➕ to install the printer.

  • HT1338 how to install hp jet 1000 printer software on my mac

    how i can i install hp jet 1000 printer software, connect it to my mac book air and get it to operate?

    If your printer were AirPrint compatible, this would explain how to do it:
    AirPrint basics
    But I believe your printer is not one of those listed in the article as AirPrint compatible.  So you'll have to visit HP's website for help.

  • Can't install hp deskjet 1510 printer

    Hello,
    Can you please help me how to install my new printer. Error says ,," the hardware was not installed because the wizard cannot find the necessary software."

    Hello, May i know if the error is displayed on the PC to which the printer is connected or is there a flashing lights on the printer ? However, untill then you may try the below steps...While the printer is ON, unplug the power cord from back of the printer.Wait for 60 seconds.Plug in the power cord to back of the printer.Now try making a COPY. 

Maybe you are looking for

  • Cannot boot after a migration to systemd in OpenVZ

    EDIT: I "solved" my problem, and I doubt this thread will ever help anybody. You're warned. Hello, Earlier today, my Arch install that was still running with initscripts (and without the last filesystem/bash upgrade) suddently rebooted, and that brok

  • When I try to open a PDF form from a site, my screen goes black.

    When I try to open a fillable PDF form from any web site my screen goes black and nothing further happens. I can use IE with success, but would prefer Firefox.

  • Adapter module to check header and footer

    Hello All, Is there any standard/custom adapter module to check the presence of header and footer in the Incoming flat file? Thanks, Regards, Moorthy

  • How much is too little?

    Hi all -- I'm about to purchase a mac pro to edit a full-length film (appx 20 hours raw miniDV footage) and was curious about your recommendation for minimum RAM. I was planning to go with 2 gig because $800 is such a huge bump to go to 4 gig; would

  • Voip setup on 2621

    hello... I have one 2621 with two fastethernet port one is connected with internet with golobal ip address and other is connected with the nonmanagable switch for local host to communicate with internet and new 2FXS card... i have only one global ip