How to install HP DeskJet printer on Solaris8

I have a HP DeskJet 880C, how to install and shared from my Solaris 8 platform?
Thanks everyone....

I was successed install it, but there is "no response" when I have printed document.
command: lp -d hp1<printer name> document

Similar Messages

How to install hp deskjet 3900 in windows 8

Please let me know how to install hp deskjet 3900 in windows 8

Hi, take a look at this HP link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Can anyone tell me how to install a network printer driver without having the network printer online?

Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
the driver? This is the point of my question!
I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

How to install a network print on solaris 10

How to install a network print on solaris 10?
Thank You!

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How to install Hp deskjet 3050 Jobs software on Windows 8.1 Desktop putter

how to install Hp deskjet 3050 J610 software on Windows 8.1 Desktop HP Pavillion

Hello @dougz ,
Welcome to the HP forums.
I understand that you would like to know how to install your deskjet 3050 software onto your Windows 8.1 desktop.
It should be as easy as installing the printers driver. Just download the software and follow the on screen prompts.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How to install hp deskjet 1000 with out the disk, we lost the disc

hp deskjet 1000 printer j110a need to know how to install without the disc to my laptop

brew31 wrote:
how can i install printer without the diskPlease read this post then provide some details. What printer model? What operating system? Do you have a 32 bit or 64 bit version? In general you can click "Support and Drivers" at the top of the page, enter your product number, select the specific model, then select the proper operating system. Next look for an appropriate driver, typically the full featured driver will be the one to download. Save the download and once the download has completed run the installer. If you have a USB printer you should not connect the printer until instructed to by the installer.

I'm not very computer savvy. I don't know how to install my new printer--PIXMA MP490

How can I get help installing my new printer? It's a PIXMA MP490.

Hi tada!
To have a better understanding of your issue, please let everyone know what operating system (Windows XP/Vista/7/8 or OS 10.X) you are using. That way, community will be able to assist you with suggestions appropriate for your product.
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks!

How to install hp deskjet 1000 without disc

hp deskjet printer 1000 j110a

Hi,
Please:
1. Download the following file and save on your computer (remember where):
http://ftp.hp.com/pub/softlib/software12/COL34557/dj-109016-3/DJ1000_J110_1313-1.exe
2. Double click downloaded file to install (or right click it and run).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to install a PostScript printer

Hi, I need to install a postcript printer but I cant find any drivers in mac os lion. Can you tell me how to do so?
Thnax a lotin advance

The Generic Postscript PPD is included with Lion. So when adding a printer you should be able to change the Print Using menu to see this Generic PS printer. Or, if you are a debian user, then you may prefer to use the CUPS web page as you would with your Linux distro.

How to install HP wireless printer

Please can you tell me how to install an HP wireless printer to my Ipad2 - I have managed to install the printer to my IMac. Thank you.

Hi the tone of that answer is a litte strong , but I hate to correct you the app mentioned by Divonex works well enough used it many times iPad to hp printer . Took 3 mins to install works a dream , means I can work all my office docs into google docs and print off, havent tried drop box yet . But I' ll post when I do so . Do try to be nice , we are all learning from each other . Peace.

How to install bar code printer.

Dear All,
A issue in my company that i have to install BAR code printer.But i dont have any idea how to install BAR code in sap..AS i m the BASIS guy this is the first time i m facing this issue...plz tell me how to resolve this...
Regard's

Hi,
yes, same way as you doing for other printer in SPAD
just select your device from device type in Device attribute
then select your appropriate host spool access method and host printer.
SE73 is use for font maintenance which are use in SAP script .
also check following forum to define printer
SAP prints from Suse Linux OS
regards,
kaushal
Edited by: Kaushal Malavia on Jun 20, 2008 6:24 PM

How to install Canon MG3170 printer to Macbook Air (mid 2012), both USB & wifi

I have been trying to install the Canon MG3170 to my Macbook Air (mid 2012 version) using OS X Version 10.8.4. I followed the paper manual that came with the box & used the CD provided. In the midst of the installation, "AN ERROR OCCURRED WHILE TRYING TO ADD THE SELECTED PRINTER: UNABLE TO FIND THE APPROPRIATE SOFTWARE ON YOUR SYSTEM AFTER RUNNING SOFTWARE UPDATE."
Problems:
1) Cannot connect on Network because there is no WPS button on my Airport Extreme and Airport Express.
2) Cannot print, both via USB or wifi network.
When I bought the printer, I specifically selected this because it has Airprint and wireless printing and was one of the few printers in the Apple Online store. However, I have been having a lot of issues getting the printer installed to be used on my Macbook Air.
Please help!!

Thank you John Galt!
After running SOFTWARE UPDATE, I restarted the Macbook. (DO NOT CONNECT THE PRINTER TO THE MACBOOK YET!)
Then I connected the Canon Printer MG3170 to my MacBook Air via the USB cable.
Next, I switched on the printer.
I am able to print and scan (via USB cable) from;
SYSTEM PREFERENCES - PRINT & SCAN - select CANON MG3100 series.
To install applications for printing & scanning, go to http://support-asia.canon-asia.com/contents/ASIA/EN/8201148300.html
However, this solved part of the question above, i.e., printing via USB cable (which is not the whole purpose of using the Airprint Printer) but at least it is a start.
*NOTE: UNINSTALL any prior Canon softwares and drivers specifically installed for this printer first before attempting the steps above as it may interfere with the installation process.

How to connect hp deskjet printer 2060 to a wifi router

I have a Deskjet 2060 AIO deskjet printer and want to connect to the Netgear Router N300 DNG2200 on the usb port on the router. When the printer is connected there is no notification on the USB port on configuration page. If I connect usb drive it is dected. Thanks for help in advance.

I really feel bad that I bought a product for which the customer support is so poor.
@Underwater
Yes you can add the printer to the router and the router should be able to direct your requests. Due to the printer software restrictions, the other utilities like cleaning/alighning etc would not work and you'd have to connect via USB.
I am using the same printer with my Belkin N600 router and the printing works fine.
And on a side note, just try to figure out things yourself. The support (as evident from the above two replies) is outright pathetic and misleading.

How to install HP Deskjet 990cxi printer on laptop...

I have spent two days trying to install my excellent HP Deskjet 990cxi on my new laptop running Win7 Home Premium on an AMD 64-bit processor. I want to do two things:
to set the printer up to run direct from a USB port on my laptop. Having done this, I then want
to set the printer up on BT Home Hub Type 2A, connected through the hub's USB, as a network computer.
So far under windows, this has proved a huge problem. It seems that the printer settings file is in 32-bit, but in the attempt to install the printer through the Windows "add printer" in Devices and Printers, and after a Windows update on the program to find Deskjet 990c, I run into a brick wall with the printer failing to install. I get the following message: "Printer driver was not installed. Access is denied ". Yet I am loading the printer drivers as Administrator.
By contrast, I also run Ubuntu 11.04 linux on this computer under Windows.
Ubuntu loaded the 990cxi drivers in an instant when it was connected via USB to the laptop; and more importantly,
Ubuntu set the printer us as a network printer running off the BT Home Hub type 2A and it worked perfectly. I even tested it by sending a graphics file from my garden to the printer indoors and the quality was perfect.
So the observation is this: If Ubuntu can load both printer settings on the same laptop, why is Windows 7 such a trial? Can HP or BT Customer Service do anything about this?

This might help:
I had huge problems with my HP Laserjet 5M on getting a Homehub 3.0 - I'd used a Sky router before and had similar problems at the start with that. The BT Homehub is a very poor piece of equipment and the BT support staff (in India) are absolutely useless, they try to help and got me to allow them to remotely go on my screen and control my computer - so I could see exactly what they were doing - the computer equivalent of a bogbrush to a blocked bog - not impressive and 2 days and over 2 hours on the phone got me nowhere.
Finally found the instructions - or similar I'd used some years ago on the Sky hub:
Instructions on how to set a LaserJet 5M for IP address use on a network. Other printers models may may be similar.
         This is necessary on Mac OSX 10.6+ due to the loss of Appletalk support which made it much easier to configure with Default.
         • Press Menu, repeatedly, the following messages appears on the control panel: HP MIO MENU
         • Press ITEM. - CFG NETWORK=NO* will appear.
         • Press the PLUS button once. - CFG NETWORK=YES* will appear.
         • Press SELECT .
         • Press ITEM repeatedly until CFG TCP/IP=NO* appears.
         • Press the PLUS button. CFG TCP/IP=YES* will appear.
         • Press SELECT.
         For DHCP based IP addressing:
         • Press ITEM until BOOTP=YES* appears.
         • When using BootP or DHCP, keep the setting BOOTP=YES*. If set to BOOTP=NO*, then press the PLUS to change it to BOOTP=YES.
         • Press SELECT to set, then GO.
         • The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect.
         • No other TCP/IP configuring is necessary.
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set for BootP the lower right corner of the test page display something like:
         TCP/IP STATUS: READY
         HOST NAME: 192.168.2.10
         CONFIG BY RARP/BOOTP
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: NOT SPECIFIED
         IDLE TIMEOUT (SECONDS): 90
         SNMP GET CMTY NAME: ALL
         SNMP SET CMTY NAME: NONE
         BOOTP/DHCP SERVER: 0.0.0.0
         If you want to set the printer to a static IP address:
ALSO if you do NOT have a JetDirect follow the instructions below:
         • Press ITEM until BOOTP=YES* appears.
         • Press the PLUS button. BOOTP=NO will appear.
         • Press ITEM . IP BYTE 1=192 will appear.
         • Press the PLUS or MINUS button until the value of the first byte of the IP address appears on the control-panel display.
         • Press SELECT to set that byte.
         • Press ITEM to continue.
         • Repeat to configure the remaining bytes of the IP address you wan to set. e.g., IP BYTE 2=168 , IP BYTE 3=2, IP BYTE 1=10) = 192.168.2.10
         • Repeat Steps to configure the subnet mask bytes (SM BYTE 1=255, SM BYTE 2=255, SM BYTE 3=255 , SM BYTE 4=0) = 255.255.255.0
         • Repeat Steps to configure the syslog server IP address (LG BYTE 1=0,LG BYTE 2=0, LG BYTE 3=0, LG BYTE 4=0) = 0.0.0.0 (Mine had the BYTE 4=1 and only when I reset it to BYTE 4=0 did everything go correctly).
         • You can leave this at 0.0.0.0 if not needed.
         • Repeat Steps to configure the default gateway (GW BYTE 1=192, GW BYTE 2=168, GW BYTE 3=2, GW BYTE 4=1) = 192.168.2.1 (often it is automatically set by your router and you do not have to do anything other than check this is correct).
         • Configure the timeout (TIMEOUT=90). You can leave the default at 90 seconds.
         • Press GO .
         • Print a self-test page to verify the IP settings.
         • Press Menu until TEST MENU appears.
         • Press Item until PRINT SELF TEST is displayed.
         • Press SELECT .
         • If the test page does not show the correct settings, power cycle the printer and reprint the test page.
         When set to a static value it looks something like:
         TCP/IP STATUS: READY
         CONFIG BY FRONT PANEL/TELNET
         IP ADDRESS: 192.168.2.10
         SUBNET MASK: 255.255.255.0
         DEF. GATEWAY 192.168.2.1
         SYSLOG SERVER: 0.0.0.0
         IDLE TIMEOUT (SECONDS): 90
         Add the printer.
         • To add the printer on Mac OSX 10.6+, open the Printer & Fax Preference panel.
         • Unlock if locked.
         • Press + to add.
         • Select HP JetDirect - Socket from the Protocol pulldown menu.
BUT if you do not have a JetDirect then click the Line Printer Daemon – LPD option instead.
         • In the address field, enter the IP address from the Test Page printout.
         • Print Using should set itself to LaserJet 5M from the built-in drivers in Mac OSX 10.6+ within a few seconds if it can communicate with the printer.
         • Type in a name you want to give the printer. It will use its IP Address as the name if nothing is entered.
         • Type in a location if you desire. Not sure where this shows up.
         • Press Add.
         • The Installable Options are determined and the printer is added.
NOTE – ref users without a JetDirect:
                  • If you get a message telling you the printer is busy – you have probably indicated JetDirect or Internet Printing Protocol - IPP option in the Protocol pulldown menu by mistake – delete the printer and go back and reset it with the Line Printer Daemon – LPD option instead.
Good luck.

How to install hp deskjet 920c printer?

I was trying to install this printer, but the macbook doesn't take the software

Is this what you're trying to install? This is the latest Mac driver for the 920C. Note that it was last updated in 2007 for OS X 10.5, and there may be no version of it that's compatible with OS X 10.6 or later. If that's the case, you may need to replace the 920C with a more modern printer.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=33996&prodTypeId=18972&prodSeriesId=28856&swLang=8&taskId=135&swEnvO ID=4019

How to install HP DeskJet printer on Solaris8

Similar Messages

Maybe you are looking for