How to install HP laser jet 4345 printer

How to install this printer to macbook pro

You need to follow the following instructions for your model of HP Printer to install the appropriate printer drivers for  Lion:
   http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=115&prodSeriesId=415204&prodTypeId=18972&objectID=c02950970#ASU_DownloadInstr uctions
Hope this helps

Similar Messages

  • How to install hp laser jet 1018 on windows 7 x64

    ok thanks
    how to instal hp laserjet on computer windows 7 (64-bit)?

    Have you already installed the driver/software and its not working or is this the first time you are installing?
    For the first time installing...
    1. Close any software programs running on your computer.
    2. Click on the Download button ( LJ1018_1020_1022_Full_Solution.exe ) and save the file to your hard disk.
    3. Double click on the downloaded file. This will extract all the driver files into a directory on your hard drive. The default directory these files are extracted to will have a similar name to the printer model.
    4. Follow the on-screen instructions to proceed installation.
    I usually have the printer disconnected from the computer and connect the usb cord when prompted by the installer.
    Is this what you are looking for?
    Let me know how it turns out.

  • How to install HP Laser jet 1010

    I have windows 7 (64 bit) Labtop and i to install old HP laserjet 1010 printer  Now i got problem. I cannot find its driver for windows7  i  lost the disk. Then what should i do? My printer may be useless.  . Please help me in this
    regard.
    Sunnyk

    Hello sunnyK,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Laserjet 1010 printer is a commercial product. You can do this at the HP Enterprise Business Community.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Install HP Laser Jet printer 1022 in w7 - 32 bit system

    hi 
    Anyone can help to install HP Laser Jet 1022 printer to windows 7, 32 bit system.. because i can't install it correctly.
    is thier any compatibility issue between the printer and the O.S ??
    Thanks,
    Regards,

    Hi polyester,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More
    I understand that you are having a problem with installing a Windows XP 32-bit printer driver. I will try my best to help you resolve this issue.  If you have an older version of this print driver or other older LaserJet print drivers installed, then this could be causing an issue.
    Use the HP Officejet Pro Software and Driver Removal Utility and do a level 3 uninstall to remove all the printer software and drivers.
    Here is a document for Installing the Printer Software in Windows XP for a USB Cable Connection that explains the steps to installing the software and drivers.
    Here is the link for the HP LaserJet 1020 and 1022 Printer series Hostbased Plug and Play Basic Driver download page.
    I hope this information helps, please let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • How do i install a hp laser jet 4l printer on windows7

    how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

    The driver is delivered through Windows Update as described here.  
    You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
    If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable.  The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do I use my HP Laser Jet 4M  printer work with my OS 10.9 MacBook Pro

    A "newbie" here.  I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer.  HP apparently does not support the Mac's OS10.9. Any help appreciated.

    Ok, I've downloaded the drivers as suggested.but still not printing as it should.
    It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
    From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
    Meanwhile, any other advice.
    Regards

  • Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

    I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

    I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it.  Do you know what changed between 19.8 to 19.13? 

  • Hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000 none work xp pro

    hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000  now none work win xp pro
    any ideas printer port probs???
    Thanks
    John

    Hello jpihl1
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413Hello jpihl1
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Info on How to install adobe pdf as a printer into my device -printer file in windows 7

    Need information on how to install adobe pdf as a printer in my device-printer file in windows 7. I currently have adobe 8 pro & acrobat distiller on my pc.

    Acrobat appears to be running just fine- I am running windows 7 Ultimate 64 bit. I don't know why it just didn't automatically install- I just replaced an older HD that was going bad. Copied my entire system using windows mirrow image. Adobe pdf converter was in my device and printer file before and now its's not. I did have to reinstall several programs, such as Adobe Acrobat, etc.

  • Can't print to hp laser jet 1020 printer connected to airport express

    Hello All - I recently bought an airport extreme so I am doing some re-configuring of my home network but I am having issues getting the desired out come.
    I have the airport extreme connected to the modem. From the extreme in another room, I have an airport express connected to the airport extreme wirelessly (I set that up through the airport utility without any problems.)  Now I want to connect my usb hp laser jet 1020 printer the airport express to print from.  I have a windows 7 machine.  I can see the printer connected to the airport express through the airport utility.  I have tried to use the bonjour print service to set up the print connection.  Bonjour sees the printer connected as well, I run through all the prompts and click finish, but when I go to print something, it goes to print que and nothing happens. (side note, the printer works just fine when connected directly to the computer).
    So I guess my question is, it appears the computer sees that my printer is connected to the airport express. But some point along the way, when I go to print, the message gets lost or goes to the wrong place. I am on the right track?  Any other suggestions?
    Thanks.

    Does "plugged into it" mean that the printer is connected using USB or Ethernet?
    If USB, have you run Bonjour for Windows to find and configure the printer?  (Pages 16-17 in the Setup Guide)
    Bonjour Print Services for Windows v2.0.2

  • What is the life expectancy of the hp laser jet p3015 printer?

    What is the life expectancy of the hp laser jet p3015 printer?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
    Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
    Some telltale signs that an AirPort has (or is about to fail):
    Status lights are not illuminated or do not match any of the known configurations.
    Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
    Unit refuses to intialize, even after performing multiple "factory default" resets.
    Weak or no wireless signal.
    Ethernet port(s) not functioning
    Etc.
    Also, are there any compatiility issues with newer models and G5/G4s?
    Three potential issues:
    Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
    Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
    Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

  • How to download hp laser jet 3050 from hp site?

    How to download hp laser jet 3050 from hp site?
    Thanks

    Make a copy of a document. Also a blank paper copy to see if it shows up then. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • How to solve hp laser jet cp4525 showing magenta on the background

    Good day, does anybody no how to solve hp laser jet cp4525 showing magenta on the background. The responses will be appreciated
    Thanks.

    Make a copy of a document. Also a blank paper copy to see if it shows up then. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

    Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

    Hello k1watt,
    Thanks for using Apple Support Communities.
    From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac.  I defintely understand how frustrating this is, especially since printing is vital to your business.  The printer driver version 19.8 is the most current version available.  To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Deletethe affected printer, thenaddthe printer again.
    If the issue persists, try these additional steps:
    Resetthe printing system, then add the printer again.
    If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Troubleshooting printer issues in OS X - Apple Support
    OS X: Printer and scanner software available for download - Apple Support
    Take care,
    Alex H.

  • About getting hp Laser Jet 1320 Printer Driver Softwear

    Dear Team Leader,
    I have lost my HP Laser Jet 1320 softwear CD. I want do download from Internet. Would you please help me by showing an easy way to get it?
    Yours Ever
    Mr_Shehub

    Hello Bholla,
    Welcome to the HP Support Forums!
    I understood that you have recently installed Windows 7 again, since the LaserJet 1022n will not install. If you are getting "turn printer on" messages when the printer is on, you have to check the USB connection between printer and computer.
    Have you tried to installed using the HP full feature software and drivers for this printer? If not it is a free download: HP LaserJet Full Feature Software and Driver.
    Let me know if that works any better for you
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • Costing Variant & Prod Cost Collector

    I am in the scenario of period costing with a product collector.  Please guide me on the following: While configuring for costing/valuation variant, I find that we create a costing / valuation variant under 'Material cost estimate with Qty structure'

  • Best Practice: DAG and AutoDatabaseMountDial Setting

    Hi, I am working with management in my organization with regard to our DAG fail over settings. By default, the fail over setting is set to 'Good Availability' (missing 6 logs or less per DB). My organization did not feel comfortable with data loss so

  • How to attach documents in PR/PO, is there any standard settings

    Hi Experts, How do we attach a document into a PR/PO. The requirement is to attach supporting documents into a PR/PO, so that when it goes for approval, the release approver can view the supporting document in the PO/PR. We have a Attach Icon in the

  • Using AAD as a user-database

    I'm wondering if it's possible to use Windows Azure Active Directory (WAAD) as a standard "user-database"? Let me explain.. We currently have a standard, "home-built" user registration system build on top of SQL server, MVC, etc. The users in this da

  • WIS 10901 / Linux / BO XI3.1/ Oracle 10g client

    I have been installed a server with Linux 4.8 with Bo XI 3.1, Oracle 10g client. When i refresh a report of WebIntelligence on Infoview i recibed the error: (CS) Unable to bind to configuration object (WIS 10901) (CS) DBDriver failed to load /bo/bobj