How to Install Hyper-V on a Virtual Machine in Hyper-V on windows 2erver 2012 R2 ?

Hi ,
anybody know  How to Install Hyper-V on a Virtual Machine in Hyper-V on windows 2erver 2012 R2 ?
I want to create lab but i couldn't  I follow this article but the new VM is off
http://blogs.technet.com/b/gbanin/archive/2013/06/26/how-to-install-hyper-v-on-a-virtual-machine-in-hyper-v.aspx
one of hyper-v component is not running
thanks

Previously it has been blocked to install Windows Server in the VM and then add the Hyper-V Role.
However, it has always been possible to install Hyper-V Server inside a VM. (the free Hyper-V Server SKU)
The Hyper-V Server VM is fully manageable, but it cannot start any VMs.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Similar Messages

  • How to install hyper-v on windows 8 ?

    How to install hyper-v on windows 8 ?
    I want to install virtual PC but after some research I came to know that windows 8 no longer support virtual pc and it has been replaced by something called hyper-v.
    I just bought a Windows 8 laptop.
    I tried looking into windows on / off features (in control panel) and there is NO hyper-V.
    I know why I don't have hyper-V because after doing some research it seems like it is only available on windows 8 PRO.
    Here is comparison chart:
    http://en.wikipedia.org/wiki/Windows_8_editions#Comparison_chart
    I have Widows 8 on my laptop (NOT Windows PRO).
    Now in this situation, how to install hyper-v on my laptop ?
    Also, will I be able to run windows 7 virtually on my windows 8 laptop using hyper-v just like virtual pc ? like switching in windows between OS ? If I cannot do this and hyper-v does not work like virtual PC then I don;t think hyper-v will be useful to
    me at all and i don't wanna figure it out if it is not useful in any way ?

    Hi jeffcarter,
    To enable the Windows 8 Client Hyper-V feature, our computer needs to meet the following requirements:
    1. Hardware supports Second Level Address Translation (SLAT)
    2. 64-bit Windows 8 Pro or Enterprise.
    3. 4 GB or above of RAM.
    Therefore, it seems that your computer cannot install Hyper-V. Also, Windows Virtual PC cannot be run on Windows 8. Thanks for your understanding.
    In addition, regarding how to configure your BIOS to enable Intel VT-X, you can refer to your motherboard’s operating manual or query the vendor support for help.
    More information:
    Client Hyper-V
    Bringing Hyper-V to “Windows 8”
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Installing Hyper-V on Windows 7

    Hi!
    I installed Hyper-V on Windows 7, but when I try to connect to local host, the follow message appears:
    "Hyper-V has not been installed on computer localhost""
    Someone can help me?
    Regards

    Hello,
    There is a solution, you 'll still be able to run a virtual machine on Windows 7. You've got to first create a Virtual Hard disk (vhd) then install Windows Server 2008R2 on it by WIM2VHD. Create a boot entry by bcdedit. Then you have your new environment
    where you can install hyper-V!
    Bye, Sébastien
    Please explain how you can run Hyper-V in Windows 7 if you install Server 2008 R2 in a VHD.  The Server 2008 R@ VHD is a separate environment on the HDD.  When you boot the Server 2008 R2 VHD you are not running Windows 7.
    Read the information found @
    http://www.msfn.org/board/topic/129475-boot-windows-7-from-vhd-an-amazing-concept/ about booting from VHD.  Your method of creating the Server 2008 R2 VHD will not work.  Server 2008 R@ must be installed to its own separate VHD the same as with
    the Windows 7 VHD.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it

    I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it does not install ang give an Error code 72, it is assuming that I already are using the Creative cloud in 2 computer, but itis no the case, how to solve this situation?

    Dave: I did the Microsoft Update two days before this happened, and rebooted as required.  I just created a new restore point and lauched Creative Cloud.  Now I get the famous white screen:
    It just sits and spins (been 10 minutes now). 
    Fortunately, I saved away this command (which I've had to use 4 or 5 times already):
    del %USERPROFILE%\AppData\Local\Adobe\OOBE\opm.db
    Unfortunately now, I get this (even after closing the above window):
    The process cannot access the file because it is being used by another process.
    So I killed everything that said "Adobe" in the task manager and this time, the command succeeded.
    Fortunately, the current apps seem to still work.  I can't seem to find the "Creative Cloud" app in the applications on my system, but I launched Photoshop CC, told it to look for updates, and got a list of the 5 prgorams that need updates in the Adobe Application manager:
    I will proceed with the updates, holding my breath.

  • How can I get Virtual Machine NIC traffic usage data using SCOM 2012 R2 ?

    Hello Guys,
    How can I get Hyper-V 2012 r2 Virtual Machine NIC traffic usage data using SCOM 2012 R2 ?
    Thanks
    NM-BG

    Hi,
    Please refer to the following links:
    Hyper-V Management Pack Extensions 2012 / 2012 R2
    https://hypervmpe2012.codeplex.com/
    System Center Management Pack for Windows Server 2012 R2 Hyper-V
    http://www.microsoft.com/en-us/download/details.aspx?id=40798
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to install forms 6i on the same machine oracle8i installed

    I have oracle8.1.6 release 2 installed on microsocft windows 98. How do I installed forms 6i on the same machine. when I installed forms6i, it has overwritten the resgistry settings and I cannot run database any more. Please give me some ideas how to install all these on the same machine on windows 98 , operating system DOS.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Simon Jennings ([email protected]):
    You need to use seperate Oracle homes.<HR></BLOCKQUOTE>
    You have to install Forms6i on a different Oracle_Home not Default_Home, which I believe is where you installed Oracle8i.

  • Can install Hyper-V on Windows 8 OEM?

    Hi,
    End User purchased Windows Server 2012 Volume License.
    can end user install hyper-v on Windows 8 OEM?
    Looking forward for your reply.
    Thank you in an advance.
    Regards,
    Ganga

    Hello,
    Hyper-V related questions should be posted in the Hyper-V forums here:
    http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread
    Hyper-V can be installed on Windows 8 Pro, does not matter if Windows 8 Pro is OEM.  Windows 8 does not have the ability to install Hyper-V.

  • Is possible to install Hyper-V on windows 7 Enterprise ?

    Is possible to install Hyper-V on windows 7 Enterprise ? if yes 64bit or 32bit? 

    Hi Velavan,
    Hyper-V is only available on Windows Server, Windows 8 and above or as a standalone Hyper-V server. However the client version on windows 8 and above will not allow clustering and so
    on and is  great for development or training environments but not production.
    If you are just looking to manage remote Hyper-V hosts on a windows 7 client you can download the RSAT tools and install Hyper-V manager and Failover Cluster Manager which will allow you to manage
    your remote hosts or clusters.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • SAP Content Server can be installed and supported on a Virtual Machine

    Hi,
    I would like to know if the SAP Content Server can be installed and supported on a Virtual Machine.
    Are there any sap notes to support this.
    Regards,
    Rajiv

    SAP support VMWARE
    MAXDB support VMWARE.
    you are free to go.
    I would ask this question in the SAP on VMWARE group at Virtualization on Windows
    close message here when you created the message in the proper forum.

  • Periodically lose virtual machine (Parallels) internet connection on windows 7

    Running OS X Mavericks 10.9.5
    Parallels 9.0.24172 running Windows 7 enterprise
    Internet connection would periodically time out, and force a reboot of the virtual machine to regain connection.
    Using a wired connection.

    Changing the network configuration settings for the virtual machine from "Shared connection" to "Ethernet" (for my specific connection) solved this problem. It seems there is an issue with the shared connection feature for Parallels and OS X.
    At the Parallels virtual machine selection:
    1. Right click on the virtual machine
    2. Select Configure
    3. Choose the Hardware tab
    4. Select Network or Network '#'
    5. Change the network Type
    6. Choose your preferred type
         Ex. If you are using a WiFi connection select WiFi.
         (You may have to re-enter the SSID and Password to your router/network for the virtual machine).
         In this selection window : Using "Shared connection" is what caused the connectivity problems for my computer.

  • How to convert offline ESXi 5.5U1 virtual machines to Hyper-V?

    Following on from my
    earlier question, I am having trouble working out how to convert my ESXi VMs to Hyper-V. Am I doing something really unusual?
    I have a ESXi 5.5U1 server at home for my home test lab. I want to convert this to Hyper-V Core 2012 R2. Target storage layout will look like this:
    Currently under ESXi 5.5, I don't have the C drive (using a USB flash to boot), and the RAID-5 and RAID-0 arrays are two separate VMFS volumes.
    I don't have swing kit to migrate, I have to repurpose existing hardware. I do have my Windows 8.1 workstation but that only has 900 GB free space.
    Some of my VMs have vmdks greater than 2TB.
    My plan was to
    In ESXi before rebuilding, move my VMs from the RAID-5 vol to the RAID-0 vol and then delete anything that wouldn't fit that's not strictly necessary from the RAID-5 volume.
    Shutdown ESXi and remove the USB flash drive.
    Install Hyper-V onto the System disk as C drive.
    Format the RAID-5 volume as NTFS (64k) and create a mount point into the C drive as C:\RAID-5. Put my VM disks in C:\RAID-5\VirtualDisks and the VMs in C:\RAID-5\VirtualMachines.
    Somehow convert the VMs from the RAID-0 VMFS volume to Hyper-V VMs on the RAID-5 NTFS volume.
    My confidence is low because I have tried to convert a new test machine created in ESXi 5.5 to a spare test Hyper-V 2012 R2 with the MVMC 3.1 converter and it failed. I also tried with the free 5nine converter and that failed too. I tried with and without
    the Guest Additions installed. Both conversions failed. I should mention I am in a workgroup, not a windows domain.
    Please help!

    May i inquire on why those two products failed? I had some struggles with both of them but eventually got things worked.
    Also you should try this one
    Starwind V2V convertor, it has worked for pure offline conversions for me as well. That was years ago, so hopefully it still works.
    Sure, here is the log from an attempt to convert a brand new VMware virtual machine which has Windows Server 2012 R2 Standard in it with no VM tools. http://pastebin.com/xdhzZ7tx
    Here is the log from an attempt to convert a Lubuntu linux VM: http://pastebin.com/Nc0E8Bip
    Both conversions attempted with MVMC3.1. Common error between them is
    12/24/2014 08:25:36 +00:00  [7]  VERBOSE:    Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException: The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the
    workspace folder path. ---> System.AggregateException: One or more errors occurred. ---> System.AggregateException: One or more errors occurred. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be
    translated.
    I retried using 5nine converter and it worked this time, not sure why. Will not try a test with a BSD based distro (pfSense) and Linux.

  • How to create a notification for new virtual machines created on Hyper-v Using SCOM or another way?

    Hi ,
    We need to  to create a notification for new virtual machines created on Hyper-v Using SCOM or another way
    thanks

    http://sincealtair.blogspot.com/2010/04/how-to-ask-questions-in-technical-forum.html
    Not nearly enough information.
    If you are asking about SCOM, it is better to ask in the SCOM forum -
    http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
    .:|:.:|:. tim

  • How do i know whether JAVA  is installed or not in my virtual machine .

    Good Morning everyone !
    I am installing oracle 11.2.0.1.0  on oracle Enterprise Linux 5.5
    While trying to create database through tool (dbca), I am getting following error.
    $ dbca
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # SIGSEGV (0xb) at pc=0x9fcc43e4, pid=9242, tid=3086391504
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
    # Problematic frame:
    # C [libnnz11.so+0x3c3e4]
    # An error report file with more information is saved as hs_err_pid9242.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    Aborted
    I suspect JAVA may be not compatible for my machine.
    How Do I check whether java is installe or not.
    Vmware machine Version is : 9
    $ uname -ir
    2.6.18-194.el5 i386
    $ echo $ORACLE_HOME
    /u01/app/oracle/product/11.2.0/db_1
    $ echo $LD_LIBRARY_PATH
    /u01/app/oracle/product/11.2.0/db_1/lib:/lib:/usr/lib

    @ Srini ,  AsifMuhammad
    My host system is 64  bit
    My guest system is 32 bit
    MY HOST SYSTEM INFORMATION  (
    System Information
    Time of this report: 10/16/2013, 20:44:07
           Machine name: ORACLE-LINUX-PC
       Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130801-1533)
               Language: English (Regional Setting: English)
    System Manufacturer: System manufacturer
           System Model: System Product Name
                   BIOS: BIOS Date: 07/05/11 19:20:42 Ver: 08.00.14
              Processor: AMD Phenom(tm) II X4 B60 Processor (3 CPUs), ~3.3GHz
                 Memory: 8192MB RAM
    Available OS Memory: 7936MB RAM
              Page File: 4064MB used, 11803MB available
            Windows Dir: C:\Windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.01.7601.17514 32bit Unicode
    MY GUEST  ( vmware version 9)  details
    # uname -a
    Linux oel5.linuxserver 2.6.18-194.el5 #1 SMP Mon Mar 29 20:06:41 EDT 2010 i686 athlon i386 GNU/Linux
    Installed package details : For RHEL 5 (32-bit): 
    rpm -Uvih binutils-2*
    rpm -Uvih compat-libstdc++-33*
    rpm -Uvih elfutils-libelf-0*
    rpm -Uvih elfutils-libelf-devel-0*
    rpm -Uvih elfutils-libelf-devel-static-0*
    rpm -Uvih gcc-4*
    rpm -Uvih gcc-c++-4*
    rpm -Uvih glibc-2*`uname -p`*         ---------------------------->  I cannot install this package.
    rpm -Uvih glibc-common-2*
    rpm -Uvih glibc-devel-2*
    rpm -Uvih glibc-headers-2*
    rpm -Uvih kernel-headers-2*
    rpm -Uvih ksh-20*
    rpm -Uvih libaio-0*
    rpm -Uvih libaio-devel-0*
    rpm -Uvih libgcc-4*
    rpm -Uvih libgomp-4*
    rpm -Uvih libstdc++-4*
    rpm -Uvih libstdc++-devel-4*
    rpm -Uvih make-3*
    rpm -Uvih numactl-devel-0*
    rpm -Uvih sysstat-7*
    rpm -Uvih unixODBC-2*
    rpm -Uvih unixODBC-devel-2*
    kernal settings
    # Controls the maximum number of shared memory segments, in pages
    kernel.shmall = 268435456
    net.ipv4.ip_forward = 0
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.default.accept_source_route = 0
    kernel.sysrq = 1
    kernel.core_uses_pid = 1
    net.ipv4.tcp_syncookies = 1
    kernel.msgmnb = 65536
    kernel.msgmax = 8192
    kernel.shmmax = 4294967295
    kernel.shmall = 1073741824
    fs.file-max = 6815744
    kernel.msgmni = 2878
    kernel.sem = 250 32000 100 142
    kernel.shmmni = 4096
    net.core.rmem_default = 4194304
    net.core.rmem_max = 4194304
    net.core.wmem_default = 262144
    net.core.wmem_max = 1048576
    fs.aio-max-nr = 3145728
    net.ipv4.ip_local_port_range = 9000 65000
    I have followed :  A quick step by step guide for oracle 11g R2 installation on Red Hat Enterprise Linux 5.
    Please have a look and  relply me  , any changes needed.
    Thanks ..

  • Windows 8 (How to Install hyper -v)

    Hi Team,
    I have installed Windows 8 and trying to install hyper -v but when when i am checking in control Panel /Program and feature/Turn windows feature on or off , i am unable to find hyper -v option in it.
    i believe it is not installed when i had installed windows 8, request you please guide me now how can i install it now.
    Please drop me a mail: [email protected] or reply to this question. Asap
    Thanks
    Atul Srivastava

    Hi Atul Srivastava,
    For this issue,Denis Cooper is right.
    The following prerequisites are required to successfully run Client Hyper-V on Windows 8.1:
    Windows 8 Pro or Enterprise 64 bit Operating System
    64 bit processor with Second Level Address Translation (SLAT)
    4GB system RAM at minimum
    BIOS-level Hardware Virtualization support
    You can refer to the article below:
    http://blogs.technet.com/b/canitpro/archive/2013/11/05/step-by-step-enabling-hyper-v-for-use-on-windows-8-1.aspx
    Regards,
    Kelvin Xu
    TechNet Community Support

  • Problematic issues in installing backup domain controller on Virtual Machine

    Hello,<o:p></o:p>
    I have a physical domain controller - windows Server 2012 R2 Standard installed
    in my domain environment and this is a first root domain controller.
    I have also Hyper-V Server 2012 R2 installed and joined in that domain. 
    Now I want to install an additional (Backup) domain controller as a virtual
    machine hosted on Hyper-V Server. So while promoting VM as a DC all actions and
    steps go well but the problem arise when I press the install button at the end
    of the promotion - installation gets stuck in the process of writing some
    configuration files on first DC and also in the process of replication. Unfortunately
    VM does not promote as a DC and it goes to restart.
    The error event log with - NETLOGON source is logged on the virtual machine as
    well.
    Do you have some suggestions with this issue, or experience how to resolve this..
    Thanks a lot in advance,
    GMG
    <o:p></o:p>

    Now I want to install an additional (Backup) domain controller
    There is no backup DC. All DCs are RW except RODCs.
    I would recommend first checking the health status of the existing DC using
    dcdiag command. Also, please check the IP settings in use: Please make sure that the existing DC has its primary IP address in use and that public DNS servers are set as forwarders and not in IP settings of the DC. For the new DC, please make sure
    that it points to the existing DC as primary DNS server and once promoted you can see the recommendations here to update the configuration: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
    Please also disable temporary all security software in use on the DCs and make sure that needed ports for AD replication and authentication are not blocked or filtered between the DCs.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

Maybe you are looking for