How to Install Inception Step in Teststand2013?

Hello
I try to install the NI Vision Builder Inspection Step to Teststand 2013. I Installed NI Vision Builder Automated Inspection 3.6 and Ni Vision Acquisition Software 8.5.1 and I Installed from "ts_vbai_36_and_older_july10.zip" the inspection step to TS2013.(http://www.ni.com/white-paper/4007/en/)
But when i try to run inspection step connect target i got an error message. (See screenshot) I dont know what s wrong and how to solve!?

You should probably post this to the Machine Vision forum rather than the TestStand forum. From the error it sounds like it is specific to Vision Builder rather than TestStand:
http://forums.ni.com/t5/Machine-Vision/bd-p/200
-Doug

Similar Messages

How to Install Inspection Step in Teststand 2013?

Hello
I try to install the NI Vision Builder Inspection Step to Teststand 2013. I Installed NI Vision Builder Automated Inspection 3.6 and Ni Vision Acquisition Software 8.5.1 and I Installed from "ts_vbai_36_and_older_july10.zip" the inspection step to TS2013.(http://www.ni.com/white-paper/4007/en/)
But when i try to run inspection step connect target i got an error message. (See screenshot) I dont know what s wrong and how to solve!?

The only way I can reproduce this error code is by specifying a different version than 3.6.0 in the "VBAI Version". Tested in TestStand 2010 SP1 with VBAI 3.6.1.
Attachments:
VBAIConnect.png ‏21 KB

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

How to install Leopard Snow (Steps for beginners )

HI; I am a new user for Mac system, been PC since long time; Have MBP OS X 10.5.8 since 2 month and its work EXCELLENT and I am so happy with it; could some please advice me how to install the MAC OS SL up to date Disc by steps!!! I don't want to fall in any problems and a bit afraid after reading these Posts of facing trouble during installation. really need this help. thanks

Perhaps you'll receive many suggestions — here's mine:
First make a bootable clone backup (or two) of your Mac's internal HD onto an external HD using this free software (the page may be slow to load):
http://www.shirt-pocket.com/SuperDuper
Then follow Apple's own "easy steps":
http://manuals.info.apple.com/enUS/Snow_Leopard_InstallationInstructions.pdf
Some people wait until one or two "point releases" before upgrading to a new version of OS X, e.g. they wait until 10.6.1 or 10.6.2 (containing bug fixes) becomes available. You can learn about the availability of such releases via Apple's Downloads page here:
http://support.apple.com/downloads#macosandsoftware
...or via Mac news sites such as this: http://www.tuaw.com
Here's a list of applications and their compatibility status with Snow Leopard:
http://snowleopard.wikidot.com
These free Dashboard widgets can help you keep up-to-date with new (and Snow Leopard-compatible) versions of your third-party software:
http://gkaindl.com/software/app-update
http://gkaindl.com/software/widget-update

How to install in r/3 side datasources in implimentaiotn full steps plz

plz

Hi Anitha,
If you want to install the business content data source in ECC system.
1)     First go to RSA9, you will get a screen to continue with transfer application component hierarchy. Proceed with Yes.
2)     RSA5
3)     Search for your data source provided by SAP(application specific)
4)     Select and click on Activate button.
5)     You can see all the BI content activated data sources in the transaction RSA6.
6)     If you need any changes(enhancements), do them in RSA6 and activate.
If the datasource is a logistics datasource, you have to fill the set up tables as per the application, and then check data in RSA3.
7)     BW side replicate the data source and install the BI Content objects, DSO, ICs, transformations, DTP, IP etc all the objects related to the data flow.
[Steps to install BI content data sources ECC |http://www.erphowtos.com/sap-bw/48-sap-bw-how-to-install-business-content-extractorsdatasources.html]
Regards
KP

Can anyone tell me how to install logic 8 on lion using pacifist step by step in simple terms please

can anyone tell me how to install logic 8 on lion using pacifist step PLEASE

Both psd and tiff are the two formats to use for your master file. Saving as a jpg will flatten the layers and remove any trace of transparency. Tiff has an option in the save as dialog box to compress the file.
If you find it necessary you could zip older files for archiving.
Once the raw file has been opened in photoshop, it is no longer considered a raw file, as photoshop has no way to save to that file. Which is why you need to save as a psd or tiff.
That said, camera raw dialog box and Lightroom will save its edits to a sidecar file, which is why they are considered to be non-destructive. Since you can delete the side care file and start again. It is the combination. Of the raw file and the side car file that ends up in photoshop. Which is one reason why it is recommended to do as much as you can in camera raw or Lightroom first. But the latest version of photoshop allows your photoshop filets be loaded into camera raw as a filter. So that recommendation is not as important as it once was.

How to install Windows XP in Satellite A210-14s - Need step by step info

I'm not an expert about OS-Installation. I have heard from many people how complicated to install WXP in Vista Notebook. Is there any document, how to do it step by step? What should I do first? My labtop will work 100% after I install WXP? What I have ist an installation CD of WXP with SP2.
Can anyone explain me exactly? Thanks!!

well if you want replace your vista i recomend not to do it if you not pretty good and comfortable with os instaling because winxp installation is nothing hard the crazy hard part is setup all the hardware to work properly ...
i have A210-16f (can be purchased only in czech or slovak republic.) and i install the winxp a month ago and i still have problems FN keys still not working , touch pad is working onli halfway ( meaning it only points and move the cursor but all the other funcions of it still in dark)
soooo i recomend read this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26818 its how i did it.
my apologies for my english writing and spelling hope you did understand all above.
zero

Step-by-step: how to install OID

Folks:
Can you please explain me step-by-step of how to install OID. I'm using Oracle DB 10gR1. I can't install AS10gR2 because I can't configure OID.
Thanks a lot.
hewjang

Hewjang,
if you want to use OID with an existing DB you have to create the metadata repository (within your 10.2 DB) first using repCA,
(see Oracle Application Server Repository Creation Assistant User's Guides
http://download-west.oracle.com/docs/cd/B14099_19/getstart.htm)
then use the AS10gR2 installer to install OID into this existing metadata repository. Check use existing meta data repository during the infrastructure installation.
regards,
--Olaf

Step by step guide to how to install application servers

Team,
Please provide me a step by step guide to how to install application servers in BI. Right now we have one server, we need to add three more appication servers. Please provide any documentation.
Thanks

Here you go:
http://www.bbgeeks.com/blackberry-guides/blackberry-guide-how-to-install-third-party-applications-on...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can anybody tell me step by step how to install garmin maps on my palm treo

HI i am kind of new with this ...
can anybody PLEASE tell me step by step how to install garmin maps on my palm treo because I have the same error over and over again ..."detailed maps are required to use this feature"
and I have all the maps ... 2008 ... 2009 ... and I have no clue on how to install them ... I tried MAPSOURCE ... nothing
Post relates to: Treo 680 (Unlocked GSM)

Have you tried Garmin's website for help?
What did the instructions that came with the maps say about installation?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Solaris 10 - I need steps on how to install RealVNC 4..

Hi, Can someone tell me how to install VNC on Ultra5/Sol9? I have tried and I cant seem to get it... did someone install it successfully? can you tell me?
thanks!
I was able to do it on Solaris 9 but for some reason Y can get it install/running on Sol10.
Thanks!

Hi,
try VNC from:
http://www.tightvnc.com/
good luck,
amic

I am using EclispeIDE,so please tell me step by step procedure how to install buttons in firefox ToolBar using EclipseIDE.

I have downloaded XulBooster.I have xul in EclipseIDE as follows:
<pre><nowiki> <?xml version="1.0"?><?xml-stylesheet type="text/css"
href="chrome://test_ext/content/about.css" ?>
<overlay
xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul">
<window xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"
xmlns:html="http://www.w3.org/1999/xhtml" >
<toolbox id="navigator-toolbox">
<toolbar id="12345" toolbarname="niidle_toolbar"
class="chromeclass-toolbar" hidden="false" persist="hidden">
<toolbarbutton label="Label 1" />
<toolbarbutton label="Label 2" />
<toolbarbutton label="Label 3" />
</toolbar></toolbox>
</window></overlay></nowiki></pre>
I have one install.rdf as well.But problem is that it is not showing the toolbox in Firefox Web Browser.Please tell me how to install toolbox in Firefox Web Browser using Eclispe IDE.

A forum better suited for such questions is this forum:
* http://forums.mozillazine.org/viewforum.php?f=19 - mozillaZine Extension Development forum
You need to register on the MozillaZine forum site in order to post at that forum.

How to install Oracle9iDS on linux (Step by step)

Hi friends,
Can you tell me how to install 9iDS on linux?
Take care,
Tarek

For howto
www.suse.com/oracle

Does anyone have a step-by-step on how to install fireFox 3.5.5

Greetings to All!,
I have a very limited knowledge working with Solaris. I need to install Firefox 3.5.5 so that I can use a GUI based FTP client. I have downloaded the program but I
don't know how to install it and I hate to break my system. Please help.
I'm running SunOS CyberJet 5.10 Generic_141445-09 i86pc i386 i86pc
Thanks in advance,
Ramon

From where did you download what you have? What format is it in? If you got it from Mozilla, it will be either in 'tar' or 'pkg' format.
See your system documentation on how to manage these formats.

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

How to Install Inception Step in Teststand2013?

Similar Messages

Maybe you are looking for