How to Install Inspection Step in Teststand 2013?
Hello
I try to install the NI Vision Builder Inspection Step to Teststand 2013. I Installed NI Vision Builder Automated Inspection 3.6 and Ni Vision Acquisition Software 8.5.1 and I Installed from "ts_vbai_36_and_older_july10.zip" the inspection step to TS2013.(http://www.ni.com/white-paper/4007/en/)
But when i try to run inspection step connect target i got an error message. (See screenshot) I dont know what s wrong and how to solve!?
The only way I can reproduce this error code is by specifying a different version than 3.6.0 in the "VBAI Version". Tested in TestStand 2010 SP1 with VBAI 3.6.1.
Attachments:
VBAIConnect.png 21 KB
Similar Messages
-
How to Install Inception Step in Teststand2013?
Hello
I try to install the NI Vision Builder Inspection Step to Teststand 2013. I Installed NI Vision Builder Automated Inspection 3.6 and Ni Vision Acquisition Software 8.5.1 and I Installed from "ts_vbai_36_and_older_july10.zip" the inspection step to TS2013.(http://www.ni.com/white-paper/4007/en/)
But when i try to run inspection step connect target i got an error message. (See screenshot) I dont know what s wrong and how to solve!?You should probably post this to the Machine Vision forum rather than the TestStand forum. From the error it sounds like it is specific to Vision Builder rather than TestStand:
http://forums.ni.com/t5/Machine-Vision/bd-p/200
-Doug -
How to install Cumulative Update for SharePoint 2013?
I'm currently running on a single server instance of SharePoint Server 2013 RTM (15.0.4420.1017) and Project Server 2013 (no sure if CU's for sharepoint will affect this).
I would like to install SP1 on my SharePoint server. Does anyone know of any in-depth step by step guides I could follow?
Thanks
James T.FHi James,
check the steps on those articles
http://blog.fpweb.net/how-to-install-sharepoint-2013-service-pack-1/#.VDRnG_mSxyw
http://jamesdiblasi.wordpress.com/2014/03/02/howtosharepointsp1/
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation -
How to install Windows 7 on Late 2013 Macbook Pro?
I purchased a brand new Macbook Pro last week, retina display and all. I've enjoyed it thus far, yet for whatever reason, I can't seem to install windows on a partition in BootCamp like I used to be able to. I'm on Mavericks of course, 10.9.3. I tried installing Windows on an 8gb flash drive, only to find it freeze right as the Windows initial setup comes up. I have no disc drive on this laptop, and I see no reason why I would have to buy an external optical drive just to install windows. I have an ISO file from my university, and all I want to do is use it. Also, VmWare Fusion is not what I'm looking to use.The Graphics card driver fails for most of my favorite steam games. I'd like to use bootcamp how it used to be. I tried editing the assistant's .plist after finding a tutorial on google, but Bootcamp crashes every time. I'm out of options. So my question is how do I install windows 7 on this computer?
Really hoping someone can solve my problem. All I want to do is play Sniper Elite III, and nothing will work. Thank youHello Wes109,
Thanks for using Apple Support Communities.
The link below is the help documentation for Boot Camp, which will show you the exact steps to go through in order to install Windows on a Boot Camp partition:
Install Windows on your Mac
https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
Take care,
Alex H. -
How to install a Business Contact Manager 2013 database on SQL Server 2014
When I use the BCM Database Tool 2013 to create a database on a server, it doesn't pick up on any of my SQL Server 2014 instances. So far I can only get it to pick up SQL Server 2008 R2 instances in order to install the BCM database.
Someone mentioned that it works with SQL Server 2012, so is there any way to get it work on the 2014 version? I don't want to have to install 2008 or 2012 just for the sake of BCM.event if 3355 means 3 things:
The SQL Server might be offline.
The SharePoint Foundation database access account might not have the necessary permissions to communicate with the SQL Server.
A firewall that runs on either the local server or on SQL Server might be blocking network communications.
Big question, how you trying to connect SQL windows or sql authentication? is it throwing error on Config wizard or somewhere else?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
How to Install Ethical wall for Lync 2013
Hello!
So many times I've tried to installed Ethical wall in Lync Front end 2013 Server but I think m doing msticke the step am doing.....So can anyone tell where I'll get right docs to install step by step ethical wall for lync 2013
YogiThe other competitive solution is from Devcentrics Technologies....
http://devcentrics.com/Home/DCF The product name is DC Stockade with following features;
Enables ethical wall in Lync deployment
Option to chose either users, group or VLAN based e-wall
Allow or block Federated domains
Allow or block PIC domains
Block or mask the profanity words as per compliance policies
Setup alert for violation(s)
Archiving & reporting of violations
User defined custom reports & an advanced dashboard
Options to integrate with SMS and service desk system
Role based access on the application
Easily configurable & web based user interface
Integrated with Active Directory
Auto IM Bot for ethical wall
Regards, DevC | Unified Communications Architect | www.devcentrics.com - A UC Partner -
How to install intellitrace in VS ultimate 2013
I have successfully loaded and registered Visual Studio 2013. I also downloaded "IntelliTrace Collector for Visual Studio 2013 Update 4 (x86) - (Multiple Languages)". I am attempting to load it, but it will not load.
Before I explain in more detail, is intellitrace already included in the Ultimate package and I do not need to proceed with trying to load it?
When trying to load it:
I open mu_intellitrace_collector_for_visual_studio_2013_update_4_x86_5920632.exe and it extracts IntelliTraceCollection.cab. I click on the included application: IntelliTraceSC.exe and it extracts the file IntelliTraceSC.exe. When I double click
on it I get "Intellitracesc.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
Hitting DEBUG yields:
System.IO.FileNotFoundException was unhandled
Message: An unhandled exception of type 'System.IO.FileNotFoundException' occurred in Unknown Module.
Additional information: Could not load file or assembly 'Microsoft.IntelliTrace.12.0.0.SC, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
So how do I install intellitrace?Hello,
I've checked the IntelliTrace article
https://msdn.microsoft.com/en-us/library/dd264944.aspx?f=255&MSPPError=-2147217396
And as it mentioned IntelliTrace is already in Visual Studio Ultimate 2013. So I checked my Visual Studio 2013 Ultimate and see it is already installed there.
Then I checked the tool you download
http://www.microsoft.com/en-hk/download/details.aspx?id=44909
I can see the following explaination"The IntelliTrace collector is a standalone tool that you can use to collect IntelliTrace data from apps that are running in production environments. To analyze the data that's collected, you must use Visual Studio
Ultimate 2012 or Visual Studio Ultimate 2013."
So if you need to use this tool in a production environments, you can download the above tool. But if you want to use VS Ultimate to analyze the data of IntelliTrace collector, you don't need to install it again.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to install gcc compiler on mac
how to install gcc compiler om macair( 2013) ?
THANKS IN ADVANCE !!!In OS X, GCC is part of Xcode's command tools, so first, open the Mac App Store and install Xcode for free.
Then, open Xcode, go to Xcode menu (on the menu bar) > Preferences > Downloads, and install Command Line Tools. You will get commands like gcc, make, purge... -
How to install win 8.1 pro x64 on MBA mid 2013 (core i7)
Please help me how to install win 8.1 pro x64 on MBA mid 2013 (core i7).
Thank you very much for your help.
Best regards.Everything you need to help you is located here: http://www.apple.com/support/bootcamp/
-
Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play! -
Sequence mySequence = myEngine.NewSequence();
mySequence.Name = "myAction";
//Create new step of type Action and set Name
Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
mystep.Name = "GetStringObject";
//Obtain the code module from the step
DotNetModule myModule = mystep.Module as DotNetModule;
//Set properties of the module
myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
myModule.ClassName = "Class1";
myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
myModule.MemberName = "StringObject";
mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
mySequence.Locals.GetPropertyObject("StringObject", 0);
myModule.ClassReference = "Locals.StringObject";
myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs 1 KB
ex1.gif 2305 KBPlease see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments -
Please guide me on BAM install in multi environment for 2013 R2. Any blog which can show, how to configure multiple BTS servers to point to a single BAM portal created on the first server.
The BAM portal is configured on the Default Website on the first server.
How Could I Point to the same portal while configuring other 2 BTS servers?
What are the authentication mechanisms, I have to use at virtual directories and root level?
Racha RamsThe document for installing BAM for B2K13 in a multi-computer environment is available as part of the BizTalk documentation available for download from
http://www.microsoft.com/en-in/download/details.aspx?id=35552
You will most likely also need to refer to the TechNet Blog
http://blogs.technet.com/b/meamcs/archive/2013/07/26/fixed-biztalk-2013-bam-tools-configuration-problem.aspx which mentions having to setup SQL Mail feature in SQL Server 2012 and post that configuring both the features BAM Tools and BAM Alerts together.
Regards. -
How to install SharePoint server 2013 in windows server 2012 R2
Hi,
I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
Can you guide me on how to install it?,
or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
thanks in advance.Hi,
Now I could install SP 2013 following this article
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
Thanks everyone. -
Can anyone tell me in detail how to install SharePoint 2013?
I know it requires Windows Server Operating System, so installed it on my VMWare (can it be installed on Win8 by any any any chance, highly unlikely)
When I installed SharePoint Foundation 2013, it extracted files and then opened cmd prompt which opened 'splash.hta' in visual studio. I can't get past it!
What are the pre-requisites???
Please tell me in detail how to install Sharepoint on a laptop, if it is possible.
I am learning it these days, and want to try on it on my laptop.know it requires Windows Server Operating System, so installed it on my VMWare (can it be installed
on Win8 by any any any chance, highly unlikely)
Inder : Yes you can install it on VMware but VM's operating system should be windows server 2008 r2 or
Windows server 2012. Installing SharePoint 2013 preview on Windows 8 is unsupported, although here:
http://www.microsoft.com/en-us/download/details.aspx?id=30345 it's listed. You need to install on either Server 2008 R2 SP1 or Server 2012 RC
When
I installed SharePoint Foundation 2013, it extracted files and then opened cmd prompt which opened 'splash.hta' in visual studio. I can't get past it!
Inder: can't say why is happening may be you dont have windows server.
What are the pre-requisites???
Inder: Its better if you are connected to internet from the VM to download and install pre-requisites.
It is a pain to manualy install it
If this helped you resolve your issue, please mark it Answered -
I used a method LoadPrototypeFromMetaDataToken(token,options) to load the return type parameters. I am unable to set the value field in the return parameters for an action step in teststand sequence file programatically using C#.How can I do that.
Continue here
Maybe you are looking for
-
Processor upgrade on Satellite L300-1BV
I've already upgraded the laptop from a T1600 (Celeron), to a T3200 (Pentium Dual Core). But does anyone know how far I can upgrade in the 478 P range of processors? If so, could you supply the processor numbers? +Message was edited: Model number cha
-
Stop Creation of Billing Document in Future date
Hi Experts We create Billing Document in VF01 on basis of Outbound delivery, system create Billing Document in current date. but when we choose future date that time also system create billing Document l in future date . Issue : While create Billing
-
Does Time Machine backup /Library ?
I'm a web developer and have work stored in /Library/WebServer/Documents. Will Time Machine make backups of this directory? (I haven't bought an external hard drive yet)
-
Print XML-PDF report in 40 langauges
Hi i am having the below requirement I need to print the 'statement generation program' in 40 diffrent languages For that i had the all the country specific lables in custem staging table ,I needs to call those conditionally and print them in pdf. Th
-
when i am taliking on my iphone and i get a text message at the same time how do i keep the alert tone from playing in my ear while i am on the phone ?