How to install ios 5.1.1 after installing ios 6 ?

i updated my ipad 3rd gen. from ios 5 to ios 6 .. im trying to restore my ipad to ios 5 so i downloaded ios 5.1.1 software { 1.05 GB } actually i didnt download it , i have a slow connection so i sent the link to one of my frnds n he downloaded it for me , now i have ios 5.1.1 , how to resetting it on my ipad ??
thnx for help ..

Since the downgrade of iOS is not an allowed procedure by Apple, we are not allowed to discuss it here. You will have to try some place beside an Apple forum for help on this.
Allan

Similar Messages

  • How to use Time Machine before and after installing a new hard drive

    So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

    wjosten wrote:
    Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
    Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk.  However, whenever I swap out a disk I do exactly what you do.  CCC to get the ol drive onto a new one.  Test by starting up to the new (but still external drive).  Then replace the internal drive.
    I usually just sell the old drive on eBay.  My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me.  The price of large external drives is almost the same as smaller internal ones.

  • Hi, may i know how can i get all data back after update ios 6

    Hi,
    May i know how can i get all data back after update ios 6 and all my data lost ?

    You can restore the phone and when prompted to restore choose from icloud account. BUT MAKE SURE there is 1.) an icloud backup for your phone. 2.) you are using the same apple id.
    apl

  • How do I look at pdf files after installing adobe reader?

    how do I look at pdf files after installing adobe reader?

    Start Adobe Reader
    Use the menu File > Open...
    Select the PDF file

  • How to fix lag on iphone 4 after update ios 7.0.2?

    How to fix lag on iphone 4 after update ios 7.0.2?

    settings - general - reset - reset network settings.  No data is loss.

  • HT4623 i updated my iphone 4s to the new ios 6.1.3 after installing it the device displayed itunes with a USB symbol and cannot come up. please any ideas

    i updated my iphone 4s to the new ios 6.1.3 after installing it the device displayed itunes with a USB symbol and cannot come up. please any ideas

    Do as the diagram indicates:  Connect your iPhone to your computer.  Open iTunes on the computer and restore your device.

  • How do I get my calculator back after installing the new software

    How do I get my calculator back after installing the new iO7 software?

    I'll assume alot here,?but my guess is you installed the new playforsure firmware for the player. If that is the case then you will need the playforsure plug in for the Creative MediaSource Organizer. You can download it on this creative's site under downloads.

  • I installed dreamweaver on Windows. After installing it, it blocks my  access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.

    I installed dreamweaver on Windows. After installing it, it blocks my  access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.

    See iPhone DFU mode explained, and how to enter DFU mode.

  • Installed and used Gravity (once after installing-...

    Installed and used Gravity (once after installing-) but not able to find in menu/prog. manager?
    Ovi Store says it is installed but now nowhere to be found on the 5230.
    Help please - this is a really cool app. that I am keen to keep using.

    As Chanchan says viruses don't affect S^3 phones , so if you had one , you wouldn't need to worry ! Fortunately they don't affect S60 5th edition phones either If you purchased Gravity you will have a licence attached to your phones imei numberand so can download and re-install again free of charge, as the licence will be recognised by the application, which should appear in the applications folder on your phone, or in one of the folders in there, the latest version of Gravity is available here
    http://mobileways.de/latest/gravity-beta.sisx/?build=6812
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    http://www.synapse-audio.com/

  • How can I return back to OSx after installing Lion?

    I'm disappointed. After installing Lion, everything is slower. The best thing I had last year was my new MacBook Pro, because everything was fast.. (sleep, opening programs, multitasking...etc) Now, everything takes forever. How can I return back to OSx?

    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

  • How many of you trashed Boot Camp after installing it?

    The challenge is over. After installing and playing with windows on a Mac, I'm going to get rid of it. I feel like I'm at work when using it. Good god windows is ugly and uninviting. And that sound, that familiar windows is booting sound is enough to make me barf. The main problem is dual booting, maybe I'll try Parallels desktop when it becomes available. BTW, anybody know how to properly uninstall Boot Camp?

    Actually it's working fine for me. Since I'm in a long transition process of going from Windows to Mac this is the perfect solution for me - one computer instead of two. Half the cost the way I see it. The only problem I ever had was with the Mac keyboard uninstalling itself on the Windows side intermittently - sometimes once an hour and sometimes every couple of minutes. Turns out it is a Mac issue either with the USB ports on the iMac or the keyboard itself not having enough power. Two solutions: 1) use a Windows keyboard, or 2) use an AC powered USB hub and plug the Mac keyboard into it.
    Cheers!

  • How do i open Adobe Premiere Pro after installing it?

    I just downloaded and installed this program and I can not open it. It is not showing up on my desktop as an icon and it is not in the folder that i saved it in. I also have run a full search of the computer and it says that it has been installed but i still can not find the folder it is in so i can open it. I have searched on the help section and have not found anything on this topic. HELP!!!

    After installing, the appropriate files will be installed in Program Files\Adobe (Win) or Application/Adobe/ (Mac). Could you check the following folders to see if the files are there.
    Also did the installer report any errors?
    See http://blogs.adobe.com/vikrant/2012/05/download-install-a-cs6-trial/ for a walk through for what a typical download/install experience looks like, so that you can be sure that you followed the complete process.

  • How do you get outlook to work after installing iphoto

    has anybody been able to successfully start Outlook after installing Iphoto. I have downloaded all the updated fixes, and rebuilt Outlook's data base. but Outlook will not start...
    Thanks in advance.

    Why do you think installing iPhoto affects Outlook? I would ask that on an Outlook forum.
    Regards
    TD

  • How can i change my Serial-Nr. after installing flash

    Hello everybody,
    can somebody tell we where i could change the serial-nr. of
    flash8/studio8 after installing the programm?
    Even if i deinstall studio8 and then installing it again, the
    serial-nr. stays there.
    Is there a place in the registry where i can change the
    number?
    I am thankful for any good hint...!!!
    Cheers Kalli
    In German:
    Weiß jemand wo und wie ich die Seriennr. in
    Flash8/Studio8 nachträglich ändern kann.
    Ich habe eine zweite Verison von Studio 8 erworben und
    möchte diese jetzt sammt neuer Seriennr. auf meinem Rechner
    nutzen.
    Das Problem:
    Selbst wenn man das alte Studio 8 deinstalliert, bleibt die
    alte Seriennr. erhalten.
    Ich vermute sie hängt irgendwo in der Registry.
    Dort traue ich mich aber nicht rein. Weiß auch nicht wo,
    und wie man dort was ändern kann...
    Bin dankbar für eure Tipps

    Why?
    ~~~~~~~~~~~~~~~~
    --> Adobe Certified Expert
    --> www.mudbubble.com
    --> www.keyframer.com
    ~~~~~~~~~~~~~~~~
    kalli2000 wrote:
    > Hello everybody,
    >
    > can somebody tell we where i could change the serial-nr.
    of flash8/studio8
    > after installing the programm?
    > Even if i deinstall studio8 and then installing it
    again, the serial-nr. stays
    > there.
    >
    > Is there a place in the registry where i can change the
    number?
    >
    > I am thankful for any good hint...!!!
    >
    > Cheers Kalli
    >
    > In German:
    > Weiß jemand wo und wie ich die Seriennr. in
    Flash8/Studio8 nachträglich ändern
    > kann.
    >
    > Ich habe eine zweite Verison von Studio 8 erworben und
    möchte diese jetzt
    > sammt neuer Seriennr. auf meinem Rechner nutzen.
    >
    > Das Problem:
    > Selbst wenn man das alte Studio 8 deinstalliert, bleibt
    die alte Seriennr.
    > erhalten.
    >
    > Ich vermute sie hängt irgendwo in der Registry.
    > Dort traue ich mich aber nicht rein. Weiß auch
    nicht wo, und wie man dort was
    > ändern kann...
    >
    > Bin dankbar für eure Tipps
    >

  • How to get Developer Studio front end after installing NW 2004 SP16

    Hello Friends,
                         I have installed NW 2004 - SP16. I can find the short cut in Desktop only for SAP Management console. Where to get the shortcut for Developer studio n SQL server.
    I hope Developer studio is installed with sp16.
    I have installed it in C drive. When I try to install ABAP stack in D drive, I am getting an error. Is this because already existence of Java stack.
    Cheers,
    Senthil

    Hi Senthil,
    You need to read and research more...
    Read,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50289b6a-5373-2910-91bd-b8196737c026
    Regards
    Juan

Maybe you are looking for