How to install iOS 5 if you already have 6 of them on the Iphone 3GS

How to install iOS 5, if you have already installed iOS 6 on the Iphone 3GS. Terribly buggy. It is impossible to use.

As above.
Try
Courtey AnaMusic
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

Similar Messages

Hello I would like to ask I have a problem with the Iphone 3gs 32 g I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Did you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM

You already have this Version of the JDK installed...

Hi,
I have a problem installing the java 5.0 standard platform.
After the setup has configured the windows installer, appears this:
http://www.home.pages.at/red-puma/1.JPG
But i havent got a Java application in my remove list...
What should i do?

you might want to do a simple system restore on your computer Taking the system back will remove the version of java that you cannot delete.
then install java offline.

Is it possible to install GB2 when you already have GB3 running?

Does anyone know if it is possible to have both versions of GB running on a single computer... if not, is it possible to downgrade to version 2 from version 3.
Thanks!!
Dave

If you rename the GB app, you might be able to install GB2, but I can't say for certain what the GB2 installer will do, I don't know if it will complain).
(I have all versions from 1.1 to 3.0.2) on my machine, but I never tried to install an older version, it was always a case of installing the newer version while keeping the older one)

Hi i m from bharuch, gujarat, india.........how to install ios 5 in my iphone 4..i have already itunes 10.5

hi i m from bharuch, gujarat, india.........how to install ios 5 in my iphone 4? plz help me i have already itunes 10.5

Check the required specs for the latest version of iTunes and iOS. What kind of Mac computer do you have and what OS does it have on it. Also, what kind of processor do you have, Intel?

Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.

Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

HT5622 We have two iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself

My son and I both have iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself from finding out what he is up to during Freshers week!

You have to use a different Apple ID for your son.
Read this note:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family
still valid for ios 7

How to install ios back i have windows 7?

how to install ios back i have windows 7

I don't understand your question. You mention iOS (iPhone, iPod Touch, and iPad OS) but you say you have Windows 7, and not which of the devices you want to upgrade to iOS 7. Your question about installing iOS 7 is probably best asked on one fo the forums for your iOS device, like the iPhone, iPad or iPod Touch forums.

I have fully format on my iphone3s how to install ios

i have fully format on my iphone3s how to install ios how to install the ios. itunes not detect on my mobile...

svtfrmsg wrote:
I have Windows on my mac.How to install Visual Studio?
The same way you would if you were installing it on a Windows PC.

How do you download apps that you already have on your itunes account on to your iphone 3gs, how do you download apps that you already have on your itunes account on to your iphone 3gs

how do you download apps that you already have onto your i tunes account onto your iphone 3gs

Sync them as you do wverything else.
Open itunes, connect iphone, select what you want to sync, sync.
iPhone User Guide (For iOS 5.0 Software)

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Setup has detected you already have a more functional product installed....

Ok, have adobe standard XI. end user needs Pro to redact sections of pdf's.
paid 199.00 for digital upgrade from standard to pro. download...execute...
error on starting setup. setup has detected you already have a more functional product installed....installation will now terminate.
I have 2 choices. the Go to hell adobe your product dont work, and process a refund.
or
try to get phone technical support.
Honestly why does adobe make it so difficult to work with them. My company needs digital signatures and i'd never use adobe. Adobe support is the worst in the IT industry imo and apparently their software developers cant determine that Pro is and UPGRADE from standard.
if anyone understands a work around i'd be interested in hearing but i can't say i've ever had an efficient experience with adobe and i wish i could find an alternative for adobe acrobat pro.

First you are attempting to install Acrobat Pro XI over Acrobat Standard XI and it's throwing an error that you have a more capable product. While not the most elegant or even correct message IMHO what it means is that you can't install the same version of Pro over Standard. If they were different versions (ie. Acrobat Pro XI over Acrobat Standard X ) then it would work.   There are good reasons for this installation error, but let us try to get you to the place where you can actually get the work that you need to get done accomplished.
You can use a virtual machine like VMWare, VirtualPC, Parallels, or Oracle VirtualBox to host another Windows instance and load Adobe Acrobat Pro on that vm. These are really the best way to keep things on the same machine and have both as separate usable installations. In all cases, you provide the Windows installation media. The price of the VM software varies from free to some reasonable prices.   Your choice though.
VMWare is a purchased product Windows and Mac: http://www.vmware.com
Parallels is a purchased product for Mac only: http://www.parallels.com
VirtualPC is downloadable from Microsoft at no cost: http://www.microsoft.com/en-us/download/details.aspx?id=3702
Oracle VirtualBox is downloadable from Oracle at no cost: https://www.virtualbox.org
And one more thing... you need to contact Adobe Customer service because you should be using the full Acrobat XI installer with a full blown installer Serial Numberand not the upgrade installer with an upgrade serial number.

When trying to install Adobe Standard XI, it says, "Setup has detected that you already have a more functional product installed. Steup will now terminate." I have a Pro trial installed but did not seed so much functionality so I purchased standard.

When trying to install Adobe Standard XI, it says, "Setup has detected that you already have a more functional product installed. Steup will now terminate." I have a Pro trial installed but did not seed so much functionality so I purchased standard.

uninstall any acrobat and reader versions, if you have win os clean (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then install acrobat std.

How can You create a rescue email if you already have an Apple ID/account?

I didn't think about it, thought I didn't need it, but now I know. I forgot my security answers, and I keep getting locked. I need a way to create a rescue account if I already have an Apple ID/account. I won't click on any links unless it directs me to the exact location on creating a rescue email while you already have an Apple ID/account. I went through enough threads, links and everything, I've tried every single way to answer, but still keep getting locked out. Please help me, I need it.

There is no way to create a rescue email address without correctly answering two of the questions. You need to ask Apple to reset them; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(95996)

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

How to install iOS 5 if you already have 6 of them on the Iphone 3GS

Similar Messages

Maybe you are looking for