How to install ISA/AT card

I'm trying to install an ISA/AT card using Windows 98 for use with LabVIEW software. I don't know the card model name or number, and the installation wizard isn't loading properly.

Joelle;
If I am understanding your problem right, I think the problem is beyond LabVIEW. Is the card from National Instruments? If so, try contacting a NI representative. If not, try contacting the card's manufacturer.
Regards;
Enrique Vargas
www.visecurity.com
www.vartortech.com

Similar Messages

  • How to install a sd card on lenovo ideatab 2107a?

    how to install a sd card on lenovo ideatab 2107a?

    I believe you take the top part off where the camera is. I too want to know how to do this. Also, since you're the only other person here, I have a question. If you watch youtube in HD, do you get massive lag and audio off by alot? When I watch youtube in HD, it's just unwatchable.

  • Qosmio F20: How to install the bluetooth card?

    Hello,
    Can you help please ? I have ordered few weeks ago an usb bluetooth but on the phone the seller told me that the version that I ordered has been replaced by a new one PA3477U-28TM but it's a bluetooth card and I don't know how to install it. Does anyboby could help me?
    Thanks in advance
    Sisi

    Hello Sisi
    According the notebook specification BT on your notebook is not available and it means your Qosmio is not BT upgradeable. Only solution for you is usage of external USB BT stick.

  • How to install a PCI card in my HP 110-335t expansion slot?

    The HP 110-335t desktop comes with one expansion slot, per the product spec. Right? How do I open up the box and install a PCI card?
    This question was solved.
    View Solution.

    Hi,
    Review this HP posted information.
    You can use the PCI-E mini-slot for a wireless LAN card.  Contct HP Support or Sales and get a recommendation. You will still need to configure an antenna.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How to install AirPort Extreme card in eMac?

    I just recently acquired a 2005 G4 eMac (the top-of-the-line model with the SuperDrive and 160 GB hard drive), and I am trying to install an AirPort Extreme card into it. Apparently I think the instructions must differ from this one:
    http://support.apple.com/kb/HT2596
    Since this is for the older AirPort cards.
    I pushed the card in all the way, logo facing downward, screwed in the antenna, etc., but the Mac still won't recognize it! What should I do to get it working?

    Numerous eMac users who installed Airport Extreme cards in the past have brought up that the Extreme card is a very tight fit in the eMac Airport slot, especially compared to the original Airport card. Often, the card appears to be fully seated, but is actually some fraction of a millimeter out. After seating the card according to all the instructions, you have to push hard on the edge of the card to get it to really seat all the way, hard enough to just start to push the 50-lb eMac away from you (don't try this with the eMac on the very edge of the table or desk!). I ran into exactly that putting an Extreme card in my in-law's eMac, and I had already read other's warnings; that may give you some idea how firmly you really need to push the card once it feels as if it's seated.

  • How to install a smart card reader.

    I am trying to install a smart card reader for work.  There are no prompts when connecting via USB or anything else. 

    There shouldn't be a prompt when you connect an empty card reader.  Insert a memory card into it and it should appear on the Desktop.

  • How to install new graphic card?

    I would like to try to upgrade my graphic card (currently have a GeForce 7300) to run newer games on my pc, but have never opened the back of a computer before.  I was hoping someone might be able to help.  Is it as easy as just removing the old card and installing the new one?
    I was thinking of replacing it with a Geforce 9500 or 9600.  My computer has an AMD 6400 dual processor 2.80 ghz with 2 GBs of RAM so the new graphics card should fit, right? 
    Much thanks for any thoughts and advice.

    Yep just remove and replace. Just make sure its the correct type (AGP, PCI-e, etc) thats already in there.
     The instructions with the card are pretty simple.
    1. unplug computer and remove all cords.
    2. lay computer on table.
    3. unscrew case screws and slide cover (side cover or whole cover depending on make) off.
    4. lay computer on side so you can see the mother board.
    5. touch metal chassis before touching any component.
    6. unscrew screw that holds the part of the vid card at the back slots.
    7. unplug any cable to the vid card.
    8. theres a latch that needs to be unlocked before removing card. unlock it (usually slides to the front of the computer, dont force anything)
    9. pull vid card straight out.
    install new card in reversed order. Make sure you install the new cards software/drivers according to instructions.
    King of the World...

  • How to install a network card on Solaris 10

    Hi to all,
    I have installed for the first time Solaris 10 on i386 system.
    All went fine. Although Solaris did not found the PCI network card, is this normal?
    How can I install the (Realtek) network card;
    Thank you.
    Costas.
    Edited by: tritsako on Feb 9, 2009 11:33 AM

    Thank you Zettabyte!!
    Folks, network printers should NOT BE configured like this:
    lpadmin -p somequeue -s someprinter
    that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
    Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
    You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
    The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

  • How to install a microSD card in a HP stream 7

    Hello, how do i install a 32gb MicroSD card in my Stream 7?  
    I have gotten far enough to get the back off the device.
    Thank you

    Hi,
    The microSD card slot is at the back of your deivice
    Just simply put it in at the right way (see image). You can feel a "click" when it is at the right location.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to install new graphics card

    Hi everyone. I have an intel mac pro and i want to install my pci express ati xtx 1900 card into it. It fits in the slot nice and snug but requires the 6 pin power cable to run the card. I have no idea where this is inside the mac and need help getting my new graphics card to work. i know this card works on a mac so how to i do this. please, please someone help. thank you

    If you click on the "manuals" from the small strip above, then click on Desktop -> Mac Pro ->
    http://www.apple.com/support/manuals/macpro/
    There is a pdf. You should also have a small booklet that came with the Pro, and I am surprised the card doesn't come from Apple with a guide and photos.

  • How to install the airport card to my macbook?, How to install the airport card to my macbook?

    One time when i was browsing using my macbook, it suddenly hanged. I waited for several minutes for it to return to its normal function to no avail. What i did was removed the battery then switched it on again. It worked again. But could not access the wifi anymore. When i clicked the wifi icon, it says, no airport card  installed.  What should i do?

    I'm guessing there is a language issue here.  The graphics card is the actual hardware (chip) in your computer that allows it to create graphics and show them on your display.  There is no way to disable the graphics card on your Air because there would be no way to use it (it would not be able to display anything on any display).  This is a little different on machines with multiple graphics processors, but that's not the case with your Air.  I'd imagine you know what you want to do, we're just having trouble understanding your question.

  • Install external graphic card for Probook 4420s

    Dear All,
    Please advice me how to install external graphic card for my Proboob 4420s?
    I want to setup Dialux Evo 3.1, however the software required directX 10.0 graphic card.
    Please help me to solve this problem?

    Hi,
    The following product may help:
       http://www.hisdigital.com/un/product2-674.shtml
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to Install .CAP file in the Java Card?

    Hi Friends..
    How to install *.CAP* file in the Java Card?..
    I've GPShell script as follows :
    mode_211
    enable_trace
    establish_context
    card_connect -readerNumber 2
    open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
    install_for_load -pkgAID a00000006203010c01 -nvCodeLimit 500  -sdAID A000000003000000
    load -file HelloWorld.cap
    card_disconnect
    release_contextwith that script i can load HelloWorld.cap file successfully..
    Now, how to install the HelloWorld.cap file?..
    if i add script : load -file HelloWorld.cap i got this error :
    install -file HelloWorld.cap
    file name HelloWorld.cap
    Command --> 80E602001B09A00000006203010C0107A00000015100000006EF04C60201A80000
    Wrapped command --> 84E602002309A00000006203010C0107A00000015100000006EF04C60201
    A80030C859793049B85300
    Response <-- 6985
    install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
    use not satisfied.)i ask this question because when i tried to select the applet through its AID, by this script :
    establish_context
    card_connect -readerNumber 2
    select -AID a00000006203010c0101i got this message error : select_application() returns 0x80216A82 (6A82: The application to be selected could not be found.)
    but there's exactly any that AID in my Java Card..
    here's is the list of AID from My Java Card :
    C:\GPShell-1.4.2>GPShell listgp211.txt
    mode_211
    enable_trace
    establish_context
    card_connect -readerNumber 3
    * reader name OMNIKEY CardMan 5x21-CL 0
    select -AID a000000003000000
    Command --> 00A4040008A000000003000000
    Wrapped command --> 00A4040008A000000003000000
    Response <-- 6F108408A000000003000000A5049F6501FF9000
    open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
    f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
    Command --> 80CA006600
    Wrapped command --> 80CA006600
    Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
    886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
    A026E01029000
    Command --> 8050000008AAF7A87C6013BC0300
    Wrapped command --> 8050000008AAF7A87C6013BC0300
    Response <-- 0000715457173C2A8FC1FF0200937A55C288805D8F2A04CCD43FA7E69000
    Command --> 848201001023CA18742D36165ED992CFF2146C3D51
    Wrapped command --> 848201001023CA18742D36165ED992CFF2146C3D51
    Response <-- 9000
    get_status -element 10
    Command --> 80F21000024F0000
    Wrapped command --> 84F210000A4F004FF8BE1492F7275400
    Response <-- 0CF0544C00004D4F44554C415201000009A00000006203010C010100010AA000000
    06203010C01019000
    GP211_get_status() returned 2 items
    List of Ex. Load File (AID state Ex. Module AIDs)
    f0544c00004d4f44554c4152        1
    a00000006203010c01      1
            a00000006203010c0101
    card_disconnect
    release_contextPlease help me..
    And please correct me if i'm wrong,,
    Thanks in advance..

    Any suggestions for my question?..
    Please help me..
    Thanks in advance..

  • How do I install the sim card?

    How do I install the sim card on the 5s?

    Use a paper clip and push it into that hole on the right side of the phone. The SIM container will pop out. Change the SIM and push it in.

  • How do I install the sim card in the iphone 4s?

    how do I install the sim card in the iphone 4s?

    See here: http://support.apple.com/kb/ht5163
    It talks about removing the SIM but the process is the same for putting it in.

Maybe you are looking for

  • Follow up email creates a interaction record in business context area

    Hi experts, We have just upgraded system to 7.0. here we are facing a problem when we create a service order and save it.then we go to inbox and search for the service order->create afollow up activity->go to the action and send a follow up email. No

  • Message problem in 8100 pearl

    Hi I am using Blackberry 8100 pearl. after sending a Text message from BB phone it is showing a message like supplementary service error: General Error. Whats the exact problem? any help is appreciated.

  • MIRO - Tax on sales.

    Hi experts, I´m trying to make a "MIRO" "Invoice Verification" from a Purchase Order. I want to change Tax on sales by item of purchase order when the material is 'x' with badi or user exits . Can anybody help me ? Thanks in advanced.

  • Calculating Grand Total based on the section totals

    Hi, I have a webi report with a section. Outside the section block I have a grand total block. I have a section on Shop Names. At the total level I calculate calls per hour average. So at the end of each sections the total would look like Shop 1 Shop

  • Exception Error from the Quicktime control panel/Update

    When I press the Update button under the Update tab, I get the following error: An exception occurred while trying to run "C:\Windows\system32\shell32.dll,Control_RunDD "C:\Program Files\QuickTime\QTSystem\QuickTime.cpl",QuickTime" Quicktime seems to