How to install J9 in Palm emulator

Hi,
Any body tell me , how i can install IBM JVM J9 in the Palm emulator for testing my application.
you can reply me on [email protected]
Thanks in advance
Jack

[calganesh],
My suggestion to you is to download the J2ME Wireless Toolkit ( http://java.sun.com/products/j2mewtoolkit/ ) and install the Palm OS Emulator (POSE) on the same machine. This way you can test the J2ME applications with the POSE without having to specifically look for a separate KVM to install over the POSE.
The J2ME Wireless Toolkit provides you with an option to test J2ME MIDlet applications using the POSE alongside other generic emulators offered with the toolkit.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

Similar Messages

Installing the POSE (Palm Emulator) to work with J2ME WTK 2.2

Hello All-
I am trying to install the PalmOS emulator from Palm's website and get it to pop up as a device in the K Toolbar. Although I have not had much luck thus far.
I have downloaded the skins, emulator and ROM's from the PalmOS website and have unzipped them into the wtklib directory. Unfortunately I have not gotten this to work yet.
If anyone has any ideas on how to install the POSE and get it to pull up as one of the devices in the K Toolbar, any help would be greatly appreciated.
Thanx
January

Yes, ran the script to install.
There is a link for "/usr/dt/config/Xsession.d/1200.WinLock" pointing to "/opt/SRSS-Addons/WinLock/1200.WinLock"
But after I start a session, I do not see the utaction that calls the xvkbd process. I see other utactions as follows:
(run as utku0) /opt/SUNWut/bin/utaction -t 300 -d /opt/SUNWvda/lib/vda-client -a cardRemoved -
(run as root) /opt/SUNWut/bin/utaction -t 12000 -i -e -d /opt/SUNWkio/bin/kioskrestart || /op
(run as utku0) /opt/SUNWut/bin/utaction -d /etc/opt/SUNWkio/sessions/vda/vda-cardremoved
(run as root) /opt/SUNWut/bin/utaction -x /usr/lib/smartcard/pcscd -k -x :9 -P 3786
Thanks!

How to install usb to serial emulation driver

HI all!
I am trying to develop one application which communicate to embedded system via USB. I would to get your thought about how to install third part USB to Serial emulator in PC when the application is installed in the PC. ( Normally it is done by device manager and update driver). I am using LV11 sp1.

I am afraid the is no .exe avilable. but there is .inf file avilable. Is it possible to infom window about it in labview. When i install the application and plug the device using USB window recognises the device but no comport it shows. When i update the driver by righght click device manager then lv application can perfectly communicate with the device. I want to avoid the step of updating the driver. I want the lv automatically update the drive when instlled.

How to install pocket pc 2002 emulator?

Anyone can teach me how to make my emulator work?
Currently i have 1. pocket pc 2002 sdk
2. pocket pc 2002 image
3. j2me cldc
4. midp
i am very new in developing ppc application. i was doing my final year project. Time is limited, anyone can help? Can you please teach me step by step? Thank you very much.

First check Sims 2 graphical requirements (I'm not sure the integrated graphic card will work). Then you have to install a copy of Windows XP or Vista using BootCamp: http://www.apple.com/support/bootcamp/
When done, simply install Sims 2 like a standard windows program.
Regards

How to install Apple's Rosetta emulation software?

Sigma Chess is a legacy PowerPC application and therefore needs Apple’s Rosetta emulation software in order to run on Intel based Macs. This is pre- installed on Mac OS X 10.5 and earlier, but must be installed manually on the new Mac OS X 10.6. Please guide me

Chessmaster 9000 (PPC) running in Snow Leopard Server installed in Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439

How to Install KVM in a Palm Emulator

Can anybody say how to install the KVM in the Palm Emulator.
Ganesh

[calganesh],
My suggestion to you is to download the J2ME Wireless Toolkit ( http://java.sun.com/products/j2mewtoolkit/ ) and install the Palm OS Emulator (POSE) on the same machine. This way you can test the J2ME applications with the POSE without having to specifically look for a separate KVM to install over the POSE.
The J2ME Wireless Toolkit provides you with an option to test J2ME MIDlet applications using the POSE alongside other generic emulators offered with the toolkit.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

How to install adobe air in android emulator

i am implementing one application related to android in adobe flex, .apk is generated and now while installing the .apk file in emulator, emulator is showing one pop up to install adobe air, while again installing on adobe air , it is showing that no mobile device is connected to your system. so how can i install adobe air in emulator to test the application made in adobe flex?
thanks
babu

Are you trying to launch via Flash Builder?

How to install oracle lite10g for Pocket pc emulator

hi, i have successfully run the simple gui based applications on emulator and other many applications on pocket pc as well plus the database application on pocket pc as well.]
but i got the problem in running the database application on emulator.can anybody tell me how i can install oracle lite for emulator or anything else.

Post your query at 'Oracle Provider for OLE DB' forum, you would probably find more answers there:
Oracle Provider for OLE DB

Can anybody tell me step by step how to install garmin maps on my palm treo

HI i am kind of new with this ...
can anybody PLEASE tell me step by step how to install garmin maps on my palm treo because I have the same error over and over again ..."detailed maps are required to use this feature"
and I have all the maps ... 2008 ... 2009 ... and I have no clue on how to install them ... I tried MAPSOURCE ... nothing
Post relates to: Treo 680 (Unlocked GSM)

Have you tried Garmin's website for help?
What did the instructions that came with the maps say about installation?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to use the Google Android Emulator in Flash Builder on Windows 7?

I want to try out Flash Builder to create an app, but I cannot find out how to use the Google Android Emulator in Flash Builder. The simulators in Flash Builder work, and the android emulator is installed correctly and can run. I just can't seem to connect them. How do I do that?

Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store

How to install the JRE that comes with JME 3.0 to a Windows Mobile device

From Sun's JME download page:
Integration with 3rd party emulators and Windows Mobile devices
The new Java ME Platform SDK architecture allows integration of 3rd party emulators and devices. Java ME Platform SDK comes with Sun's Java runtime environment for Windows Mobile. A user can install this runtime on a Windows Mobile device or a Microsoft device emulator and experience all the on-device features of Java ME Platform SDK.*
My question is, how can I install the Java runtime environment that comes with Java ME Platform SDK 3.0 to a Windows Mobile device. I am a newbie in this device programming and I'm setting up my development environment. So far, I have installed JME in my computer, and have also installed both the Windows Mobile 5 and Windows Mobile 6 emulator. I've been searching the internet for answers, but it always points me to using a third party java runtime such us Mysaifu, etc. I would like to stick with what is packaged with JME if possible.
If anybody assist me or direct me to an online documentation on how to do this. All help is greatly appreciated :-)

I had some success installing on a real Mobile 5 device [http://forums.sun.com/thread.jspa?threadID=5344195]
There is a link to a doc on the main download page, item 5 under How to Install. [http://java.sun.com/javame/downloads/sdk30ea.jsp] I used this for the real device, Treo 700w. Did not try it with an emulator.
The support looks to be an emulator rather than a JVM per say. But then again I could be wrong on that. I too had poked around looking for a JVM, CrEme, J9, etc..
I do have a commercial app installed on the Treo that uses IBM's J9, which is seems requires a contact with a sales person to get ahold of. I had hoped to find something that might clue me in on how to "hook up" my own J2ME app with the J9 installed by the commercial package. But I've pretty much decided to get a real J2ME handset rather than continue to waste my time hacking up something with WM. Now the question is which one makes a good reference platform?

How to install .exe files on pawerbook g4?ty

how to install .exe files on pawerbook g4?ty

dot e x e files are PC executables. They will not work on a PowerBook unless you have an appropriate Windows PC emulator, such as Virtual PC on the machine, which BTW runs very slowly on my TiBook so I don't use it very often. (Actually, I haven't used it for anything that actually worked in several years.)

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How to install J9 in Palm emulator

Similar Messages

Maybe you are looking for