How to install JDev 11.1.1.6 with a older Jdev 11g?

I had a JDeveloper 11.1.1.5 with SOA extension installed already in C:\Oracle\Middleware folder (windows7),
now I plan to install JDeveloper 11.1.1.6 with SOA extension but still keep the JDeveloper 11.1.1.5.
where should I install the JDeveloper 11.1.1.6? Thanks.

Install to new middleware home(for example: C:\Oracle\Middleware2).
Dario

Similar Messages

How to install Windows 8 on Macbook pro with retina display ?

Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !

OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

How to install adobe elements on a minibook with a 1200 x 600 resolution

how to install adobe elements on a minibook with a 1200 x 600 resolution?

You don't... that is below the minimum specifications
http://www.adobe.com/products/photoshop-premiere-elements/tech-specs.html

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

Installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g

Hi All,
I am installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g. The installation issue in creating an OID "start Oracle Internet Directory" was resolved. However, when I am installing OAM identity server it asked for the Configuration DN and Searchbase. I tried to enter dc="myCompany" as Config DN and Searchbase it did not accept. I was really stuck in my installation.
How will I check my searchbase and configdn in Fusion Middleware 11g?
Your help is very much appreciated. I need this ASAP.
thanks.

The product configuration DN is the node into which the product meta-data will be stored.
If your root suffix is dc=abc,dc=com it is considered best practice to define another node such as ou=apps.
The product will create o=oblix under the configuration DN.
I mention this in many of my responses on this forum: If you are trying to get going with OAM without training or professional help, you will find it a tough road. Get some training or bring in someone who knows the product.
Mark

How do i set up my apple tv with a older tv that has only 1 hdmi outlet? i have the DVR box, the modem, router...

how do i set up my apple tv with a older panasonic tv that has only 1 hdmi outlet? i have the DVR box, the modem, router...

you either need a get a new TV with more than 1 HDMI input or find an HDMI switch that is compatible with both the appletv an your DVR.

How to install 11.5.10 on VMWare with Windows 2003 Server?

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

How to install photoshop CS6 in silent mode with a serial number on Win7?

I have a serial number. Now I have to install photoshop CS6 in silent mode with this serial number in command line. How?

Check the deployment guides in the developer center.
Mylenium

How to install windows 8.1 64 bit with a DVD

has anyone found a workaround to install windows 8.1 64 bit with a retail DVD?

Gotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey

HT1199 How to make sure Mavericks will be compatible with other older software?

What are the steps, prior to updating from Snow Leopard to Mavericks, to prevent conflicts with other, older software?

This tells you how to find PPC programs, which wil not run on OS X 10.7 or greater: https://tidbits.com/article/12156

How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.

I recently installed a fresh version of Lion Server after attempting to fix a broken upgrade. With some help from others, I've managed to get all the new features working and have kept notes, having found that many or most of the necessary installation steps for both the OS and its services are almost entirely undocumented. When you get them working, they work great, but the entire process is very fragile, with simple setup steps causing breaks or even malicious behaviors. In case this is useful to others, here are my notes.
Start with an erased, virgin, single guid partitioned drive. Not an upgrade. Not simply a repartitioned drive. Erased. Clean. Anything else can and probably will break the Lion Server install, as I discovered myself more than once. Before erasing my drive, I already had Lion and made a Lion install DVD from instructions widely available on the web. I suppose you could also boot into the Lion recovery partition and use disk utility to erase the OS X partition then install a new partition, but I cut a DVD. The bottom line is to erase any old OS partitions. And of course to have multiple, independent backups: I use both Time Machine with a modified StdExclusions.plist and Carbon Copy Cloner.
Also, if you will be running your own personal cloud, you will want to know your domain name ahead of time, as this will be propagated everywhere throughout server, and changing anything related to SSL on Lion Server is a nightmare that I haven't figured out. If you don't yet have a domain name, go drop ten dollars at namecheap.com or wherever and reserve one before you start. Soemday someone will document how to change this stuff without breaking Lion Server, but we're not there yet. I'll assume the top-level domain name "domain.com" here.
Given good backups, a Lion Install DVD (or Recovery Partition), and a domain name, here are the steps, apparently all of which must be more-or-less strictly followed in this order.
DVD>Disk Utility>Erase Disk [or Recovery Partition>Disk Utility>Erase Partition]
DVD>Install Lion
Reboot, hopefully Lion install kicks in
Update, update, update Lion (NOT Lion Server yet) until no more updates
System Preferences>Network>Static IP on the LAN (say 10.0.1.2) and Computer name ("server" is a good standbye)
Terminal>$ sudo scutil --set HostName server.domain.com
App Store>Install Lion Server and run through the Setup
Download install Server Admin Tools, then update, update, update until no more updates
Server Admin>DNS>Zones [IF THIS WASN'T AUTOMAGICALLY CREATED (mine wasn't): Add zone domain.com with Nameserver "server.domain.com." (that's a FQDN terminated with a period) and a Mail Exchanger (MX record) "server.domain.com." with priority 10. Add Record>Add Machine (A record) server.domain.com pointing to the server's static IP. You can add fancier DNS aliases and a simpler MX record below after you get through the crucial steps.]
System Prefs>Network>Advanced>Set your DNS server to 127.0.0.1
A few DNS set-up steps and these most important steps:
A. Check that the Unix command "hostname" returns the correct hostname and you can see this hostname in Server.app>Hardware>Network
B. Check that DNS works: the unix commands "host server.domain.com" and "host 10.0.1.2" (assuming that that's your static IP) should point to each other. Do not proceed until DNS works.
C. Get Apple Push Notification Services CA via Server.app>Hardware>Settings><Click toggle, Edit... get a new cert ...>
D. Server.app>Profile Manager>Configure... [Magic script should create OD Master, signed SSL cert]
E. Server.app>Hardware>Settings>SSL Certificate> [Check to make sure it's set to the one just created]
F. Using Server.app, turn on the web, then Server.app>Profile Manager> [Click on hyperlink to get to web page, e.g. server.domain.com/profilemanager] Upper RHS pull-down, install Trust Profile
G. Keychain Access>System>Certificates [Find the automatically generated cert "Domain", the one that is a "Root certificate authority", Highlight and Export as .cer, email to all iOS devices, and click on the authority on the device. It should be entered as a trusted CA on all iOS devices. While you're at it, highlight and Export... as a .cer the certificate "IntermediateCA_SERVER.DOMAIN.COM_1", which is listed an an "Intermediate CA" -- you will use this to establish secure SSL connections with remote browsers hitting your server.]
H. iOS on LAN: browse to server.domain.com/mydevices> [click on LHS Install trust cert, then RHS Enroll device.
I. Test from web browser server.domain.com/mydevices: Lock Device to test
J. ??? Profit
12. Server Admin>DNS>Zones> Add convenient DNS alias records if necessary, e.g., mail.domain.com, smtp.domain.com, www.domain.com. If you want to refer to your box using the convenient shorthand "domain.com", you must enter the A record (NOT alias) "domain.com." FQDN pointing to the server's fixed IP. You can also enter the convenient short MX record "domain.com." with priority 11. This will all work on the LAN -- all these settings must be mirrored on the outside internet using the service from which you registered domain.com.
You are now ready to begin turning on your services. Here are a few important details and gotchas setting up cloud services.
Firewall
Server Admin>Firewall>Services> Open up all ports needed by whichever services you want to run and set up your router (assuming that your server sits behind a router) to port forward these ports to your router's LAN IP. This is most a straightforward exercise in grepping for the correct ports on this page, but there are several jaw-droppingly undocumented omissions of crucial ports for Push Services and Device Enrollment. If you want to enroll your iOS devices, make sure port 1640 is open. If you want Push Notifications to work (you do), then ports 2195, 2196, 5218, and 5223 must be open. The Unix commands "lsof -i :5218" and "nmap -p 5218 server.domain.com" (nmap available from Macports after installing Xcode from the App Store) help show which ports are open.
SSH
Do this with strong security. Server.app to turn on remote logins (open port 22), but edit /etc/sshd_config to turn off root and password logins.
PermitRootLogin no
PasswordAuthentication no
ChallengeResponseAuthentication no
I'm note sure if toggling the Allow remote logins will load this config file or, run "sudo launchctl unload -w /System/Library/LaunchAgents/org.openbsd.ssh-agent.plist ; sudo launchctl load -w /System/Library/LaunchAgents/org.openbsd.ssh-agent.plist" to restart the server's ssh daemon.
Then use ssh-keygen on remote client to generate public/private keys that can be used to remotely login to the server.
client$ ssh-keygen -t rsa -b 2048 -C client_name
[Securely copy ~/.ssh/id_rsa.pub from client to server.]
server$ cat id_rsa.pub > ~/.ssh/known_hosts
I also like DenyHosts, which emails detected ssh attacks to [email protected]. It's amazing how many ssh attacks there are on any open port 22. Not really an added security feature if you've turned off password logins, but good to monitor. Here's a Lion Server diff for the config file /usr/share/denyhosts:
$ diff denyhosts.cfg-dist denyhosts.cfg
12c12
< SECURE_LOG = /var/log/secure
> #SECURE_LOG = /var/log/secure
22a23
> SECURE_LOG = /var/log/secure.log
34c35
< HOSTS_DENY = /etc/hosts.deny
> #HOSTS_DENY = /etc/hosts.deny
40a42,44
> #
> # Mac OS X Lion Server
> HOSTS_DENY = /private/etc/hosts.deny
195c199
< LOCK_FILE = /var/lock/subsys/denyhosts
> #LOCK_FILE = /var/lock/subsys/denyhosts
202a207,208
> LOCK_FILE = /var/denyhosts/denyhosts.pid
> #
219c225
< ADMIN_EMAIL =
> ADMIN_EMAIL = [email protected]
286c292
< #SYSLOG_REPORT=YES
> SYSLOG_REPORT=YES
Network Accounts
User Server.app to create your network accounts; do not use Workgroup Manager. If you use Workgroup Manager, as I did, then your accounts will not have email addresses specified and iCal Server WILL NOT COMPLETELY WORK. Well, at least collaboration through network accounts will be handled clunkily through email, not automatically as they should. If you create a network account using Workgroup Manager, then edit that account using Server.app to specify the email to which iCal invitations may be sent. Server.app doesn't say anything about this, but that's one thing that email address entry is used for. This still isn't quite solid on Lion Server, as my Open Directory logs on a freshly installed Lion Server are filled with errors that read:
2011-12-12 15:05:52.425 EST - Module: SystemCache - Misconfiguration detected in hash 'Kerberos':
     User 'uname' (/LDAPv3/127.0.0.1) - ID 1031 - UUID 98B4DF30-09CF-42F1-6C31-9D55FE4A0812 - SID S-0-8-83-8930552043-0845248631-7065481045-9092
Oh well.
Email
Email aliases are handled with the file /private/etc/postfix/aliases. Do something like this
root:           myname
admin:          myname
sysadmin:       myname
certadmin:      myname
webmaster:      myname
my_alternate:   myname
Then run "sudo newaliases". If your ISP is Comcast or some other large provider, you probably must proxy your outgoing mail through their SMTP servers to avoid being blocked as a spammer (a lot of SMTP servers will block email from Comcast/whatever IP addresses that isn't sent by Comcast). Use Server.app>Mail to enter your account information. Even then, the Lion Server default setup may fail using this proxy. I had to do this with the file /private/etc/postfix/main.cf:
cd /etc/postfix
sudo cp ./main.cf ./main.cf.no_smtp_sasl_security_options
sudo echo 'smtp_sasl_security_options = noanonymous' >> ./main.cf
sudo serveradmin stop mail
sudo serveradmin start mail
Finally, make sure that you're running a blacklisting srevice yourself! Server Admin>Mail>Filter> Use spamhaus.org as a blacklister. Finally, set up mail to use strong Kerberos/MD5 settings under on Server Admin>Mail>Advanced. Turn off password and clear logins. The settings should be set to "Use" your SSL cert, NOT "Require". "Require" consistently breaks things for me.
If you already installed the server's Trust Certificate as described above (and opened up the correct ports), email to your account should be pushed out to all clients.
iCal Server
Server.app>Calendar>Turn ON and Allow Email Invitations, Edit... . Whatever you do, do NOT enter your own email account information in this GUI. You must enter the account information for local user com.apple.calendarserver, and the password for this account, which is stored in the System keychain: Keychain Access>System> Item com.apple.servermgr_calendar. Double-click and Show Password, copy and paste into Server.app dialog. This is all described in depth here. If you enter your own account information here (DO NOT!), the iCal Server will delete all Emails in your Inbox just as soon as it reads them, exactly like it works for user com.apple.calendarserver. Believe me, you don't want to discover this "feature", which I expect will be more tightly controlled in some future update.
Web
The functionality of Server.app's Web management is pretty limited and awful, but a few changes to the file /etc/apache2/httpd.conf will give you a pretty capable and flexible web server, just one that you must manage by hand. Here's a diff for httpd.conf:
$ diff httpd.conf.default httpd.conf
95c95
< #LoadModule ssl_module libexec/apache2/mod_ssl.so
> LoadModule ssl_module libexec/apache2/mod_ssl.so
111c111
< #LoadModule php5_module libexec/apache2/libphp5.so
> LoadModule php5_module libexec/apache2/libphp5.so
139,140c139,140
< #LoadModule auth_digest_apple_module libexec/apache2/mod_auth_digest_apple.so
< #LoadModule encoding_module libexec/apache2/mod_encoding.so
> LoadModule auth_digest_apple_module libexec/apache2/mod_auth_digest_apple.so
> LoadModule encoding_module libexec/apache2/mod_encoding.so
146c146
< #LoadModule xsendfile_module libexec/apache2/mod_xsendfile.so
> LoadModule xsendfile_module libexec/apache2/mod_xsendfile.so
177c177
< ServerAdmin [email protected]
> ServerAdmin [email protected]
186c186
< #ServerName www.example.com:80
> ServerName domain.com:443
677a678,680
> # Server-specific configuration
> # sudo apachectl -D WEBSERVICE_ON -D MACOSXSERVER -k restart
> Include /etc/apache2/mydomain/*.conf
I did "sudo mkdir /etc/apache2/mydomain" and add specific config files for various web pages to host. For example, here's a config file that will host the entire contents of an EyeTV DVR, all password controlled with htdigest ("htdigest ~uname/.htdigest EyeTV uname"). Browsing to https://server.domain.com/eyetv points to /Users/uname/Sites/EyeTV, in which there's an index.php script that can read and display the EyeTV archive at https://server.domain.com/eyetv_archive. If you want Apache username accounts with twiddles as in https://server.domain.com/~uname, specify "UserDir Sites" in the configuration file.
Alias /eyetv /Users/uname/Sites/EyeTV
<Directory "/Users/uname/Sites/EyeTV">
    AuthType Digest
    AuthName "EyeTV"
    AuthUserFile /Users/uname/.htdigest
    AuthGroupFile /dev/null
    Require user uname
    Options Indexes MultiViews
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>
Alias /eyetv_archive "/Volumes/Macintosh HD2/Documents/EyeTV Archive"
<Directory "/Volumes/Macintosh HD2/Documents/EyeTV Archive">
    AuthType Digest
    AuthName "EyeTV"
    AuthUserFile /Users/uname/.htdigest
    AuthGroupFile /dev/null
    Require user uname
    Options Indexes MultiViews
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>
I think you can turn Web off/on in Server.app to relaunch apached, or simply "sudo apachectl -D WEBSERVICE_ON -D MACOSXSERVER -k restart".
Securely copy to all desired remote clients the file IntermediateCA_SERVER.DOMAIN.COM_1.cer, which you exported from System Keychain above. Add this certificate to your remote keychain and trust it, allowing secure connections between remote clients and your server. Also on remote clients: Firefox>Advanced>Encryption>View Certificates>Authorities>Import...> Import this certificate into your browser. Now there should be a secure connection to https://server.domain.com without any SSL warnings.
One caveat is that there should be a nice way to establish secure SSL to https://domain.com and https://www.domain.com, but the automagically created SSL certificate only knows about server.domain.com. I attempted to follow this advice when I originally created the cert and add these additional domains (under "Subject Alternate Name Extension"), but the cert creation UI failed when I did this, so I just gave up. I hope that by the time these certs expire, someone posts some documentation on how to manage and change Lion Server SSL scripts AFTER the server has been promoted to an Open Directory Master. In the meantime, it would be much appreciated if anyone can post either how to add these additional domain names to the existing cert, or generate and/or sign a cert with a self-created Keychain Access root certificate authority. In my experience, any attempt to mess with the SSL certs automatically generated just breaks Lion Server.
Finally, if you don't want a little Apple logo as your web page icon, create your own 16×16 PNG and copy it to the file /Library/Server/Web/Data/Sites/Default/favicon.ico. And request that all web-crawling robots go away with the file /Library/Server/Web/Data/Sites/Default/robots.txt:
User-agent: *
Disallow: /
Misc
VNC easily works with iOS devices -- use a good passphrase. Edit /System/Library/LaunchDaemons/org.postgresql.postgres.plist and set "listen_addresses=127.0.0.1" to allow PostgreSQL connections over localhost. I've also downloaded snort/base/swatch to build an intrusion detection system, and used Macports's squid+privoxy to build a privacy-enhanced ad-blocking proxy server.

Privacy Enhancing Filtering Proxy and SSH Tunnel
Lion Server comes with its own web proxy, but chaining Squid and Privoxy together provides a capable and effective web proxy that can block ads and malicious scripts, and conceal information used to track you around the web. I've posted a simple way to build and use a privacy enhancing web proxy here. While you're at it, configure your OS and browsers to block Adobe Flash cookies and block Flash access to your camera, microphone, and peer networks. Read this WSJ article series to understand how this impacts your privacy. If you configure it to allow use for anyone on your LAN, be sure to open up ports 3128, 8118, and 8123 on your firewall.
If you've set up ssh and/or VPN as above, you can securely tunnel in to your proxy from anywhere. The syntax for ssh tunnels is a little obscure, so I wrote a little ssh tunnel script with a simpler flexible syntax. This script also allows secure tunnels to other services like VNC (port 5900). If you save this to a file ./ssht (and chmod a+x ./ssht), example syntax to establish an ssh tunnel through localhost:8080 (or, e.g., localhost:5901 for secure VNC Screen Sharing connects) looks like:
$ ./ssht 8080:[email protected]:3128
$ ./ssht 8080:alice@:
$ ./ssht 8080:
$ ./ssht 8018::8123
$ ./ssht 5901::5900 [Use the address localhost:5901 for secure VNC connects using OS X's Screen Sharing or Chicken of the VNC (sudo port install cotvnc)]
$ vi ./ssht
#!/bin/sh
# SSH tunnel to squid/whatever proxy: ssht [-p ssh_port] [localhost_port:][user_name@][ip_address][:remotehost][:remote_port]
USERNAME_DEFAULT=username
HOSTNAME_DEFAULT=domain.com
SSHPORT_DEFAULT=22
# SSH port forwarding specs, e.g. 8080:localhost:3128
LOCALHOSTPORT_DEFAULT=8080      # Default is http proxy 8080
REMOTEHOST_DEFAULT=localhost    # Default is localhost
REMOTEPORT_DEFAULT=3128         # Default is Squid port
# Parse ssh port and tunnel details if specified
SSHPORT=$SSHPORT_DEFAULT
TUNNEL_DETAILS=$LOCALHOSTPORT_DEFAULT:$USERNAME_DEFAULT@$HOSTNAME_DEFAULT:$REMOT EHOST_DEFAULT:$REMOTEPORT_DEFAULT
while [ "$1" != "" ]
do
case $1
in
    -p) shift;                  # -p option
        SSHPORT=$1;
        shift;;
     *) TUNNEL_DETAILS=$1;      # 1st argument option
        shift;;
esac
done
# Get local and remote ports, username, and hostname from the command line argument: localhost_port:user_name@ip_address:remote_host:remote_port
shopt -s extglob                        # needed for +(pattern) syntax; man sh
LOCALHOSTPORT=$LOCALHOSTPORT_DEFAULT
USERNAME=$USERNAME_DEFAULT
HOSTNAME=$HOSTNAME_DEFAULT
REMOTEHOST=$REMOTEHOST_DEFAULT
REMOTEPORT=$REMOTEPORT_DEFAULT
# LOCALHOSTPORT
CDR=${TUNNEL_DETAILS#+([0-9]):}         # delete shortest leading +([0-9]):
CAR=${TUNNEL_DETAILS%%$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR%:}                            # delete :
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    LOCALHOSTPORT=$CAR
fi
TUNNEL_DETAILS=$CDR
# REMOTEPORT
CDR=${TUNNEL_DETAILS%:+([0-9])}         # delete shortest trailing :+([0-9])
CAR=${TUNNEL_DETAILS##$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR#:}                            # delete :
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    REMOTEPORT=$CAR
fi
TUNNEL_DETAILS=$CDR
# REMOTEHOST
CDR=${TUNNEL_DETAILS%:*}                # delete shortest trailing :*
CAR=${TUNNEL_DETAILS##$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR#:}                            # delete :
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    REMOTEHOST=$CAR
fi
TUNNEL_DETAILS=$CDR
# USERNAME
CDR=${TUNNEL_DETAILS#*@}                # delete shortest leading +([0-9]):
CAR=${TUNNEL_DETAILS%%$CDR}             # cut this string from TUNNEL_DETAILS
CAR=${CAR%@}                            # delete @
if [ "$CAR" != "" ]                     # leading or trailing port specified
then
    USERNAME=$CAR
fi
TUNNEL_DETAILS=$CDR
# HOSTNAME
HOSTNAME=$TUNNEL_DETAILS
if [ "$HOSTNAME" == "" ]                # no hostname given
then
    HOSTNAME=$HOSTNAME_DEFAULT
fi
ssh -p $SSHPORT -L $LOCALHOSTPORT:$REMOTEHOST:$REMOTEPORT -l $USERNAME $HOSTNAME -f -C -q -N \
    && echo "SSH tunnel established via $LOCALHOSTPORT:$REMOTEHOST:$REMOTEPORT\n\tto $USERNAME@$HOSTNAME:$SSHPORT." \
    || echo "SSH tunnel FAIL."

How to install a gtx285 in windows xp with Bootcamp on a Mac

I have installed a gtx285 video card on my Mac Pro and all is fine, but I want to also run my windows xp installation on my Mac Pro (used Bootcamp) and I am not sure how to go about it.
The card is already in the machine but if I boot up in windows it will expect to see the old video card and may hang.
Can anyone please advise on how to get the drivers and card running in windows on my Mac?
Thanks.

What was your old video card first off. If it was also Nvidia, it should be simple.
The thorough method is to uninstall, reboot safe mode, run Driver Sweeper and delete the old graphics folder, then reboot again normally and install the latest drivers from eVGA or Nvidia for XP.
Personally.... I'd want to run 64-bit version, I think video drivers for Windows 7 are definitely good.

How to Install adobe reader on Samsung product with Windows RT

Hi, I have an Samsung ATIV but with windows RT but cant always read flash. How do I install adobe?
Many Thanks
Karl Nilsson
[email address removed]
Message was edited by: Truckcentralen

So is your problem with Adobe Reader, or Flash?
P.S. this is a public forum; please do not post your email address!

How to install Win 7 on Lenovo V570 with Freedos

Hello
I just got a new lenove V570 with Freedos and would like to install Windows 7 professional.
When I try to install Windows 7 64 bit, I get the error: The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks?.
It is really frustrating. Does anybody have an idea how to solve this problem please?
Thank you very much for your in advance
Geri
Solved!
Go to Solution.

Good evening together
@yigit, thank you for your fast response and the hints!
Now I have managed to install Windows 7 pro.
Attached the steps (as I can remember) that worked for me (without any warranty)
1.) Boot with MS Windows 7 installation CD
2.) Select country, keyboard settings etc.
3.) Accept license agreement
4.) Press proceed until the dialog with the installation volume appears (This is the place as MS Windows tells you: The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks...
5.) Delete volumes but not the one of lenovo!
6.) Press SHIFT + F10
7.) Enter diskpart (This is the MS-Windows partition tool - diskpart.efi
8.) Enter List => Now you will see the disks. In my case Disk 0 was the one
9.) Enter SELECT Disk 0
10.) Enter List => Now you will see the partitions
11.) Enter Delete Partition x (x is the partition with the MBR)
12.) Enter create partition (Now a dialog should appear asking you how much space you want to reserve for your partition
13.) E.g.. Enter 200 (200 GB
14.) Enter List partition (Now you should see the new Partition)
15.) enter Exit two times (Once for exiting diskpart, the other for coming back to the installation screen
16.) Proceed with you windows installation by selecting the new partition for your system
Selecting the right partition it was not necessary to delete the pre-installed data from lenovo!
I think this procedure should also work with a raw disk.
As Yigit outlined, please check also this link. http://support.microsoft.com/kb/297800
I tried it but I am not sure if it is necessary on lenovo systems
I hope that helps,
best regards
Geri

How to install JDev 11.1.1.6 with a older Jdev 11g?

Similar Messages

Maybe you are looking for