How to install keyboard software update

I just bought a numeric keyboard that I cannot yet use because I cannot work out how to download the apple keyboard software. When I attempt to install keyboard software update, an alert appears with the following script: a newer version of this software already exists on this disk.
Where do i find the newer software on my disk?

You don't need to. Turn on the keyboard, turn on bluetooh on your computer, then select "Set up new bluetooth device". That should be it.
BTW, you need to be on 10.6.8 to use the computer. If you are still on 10.6.4, do your software updates.

Similar Messages

How to install Mac Software Update 10.6, but it doesn't show up

In order to register my iPhone 5 it says to install the new iTunes software update and in order to install that I need the new mac software version 10.6 but it is saying that there is no software update available?

To Upgrade from Leopard 10.5.x to Snow Leopard 10.6.x
First...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

How do i Install the Software Update Server for Windows 7?

How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
I downloaded the software so How do I install it?
Do I install it all over again or when I have windows open?
I am using Bootcamp.

Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

How do install new software without a keyboard??

I just got the mac mini without bluetooth.
I am looking to add Belkin bluetooth but I do not have a keyboard - How do install new software without a keyboard??

casimirtad-
Tis a bummer. It is not a bad idea to have a cheap usb keyboard and mouse around for future troubleshooting purposes, but I am not sure that will get you past this.
Have you tried plugging stuff in to see if it works? I don't have a happy feeling that it will but it couldn't hurt to try.
Luck-
-DaddyPaycheck

HT1222 how do I download and install the software update on my iphone?

Hello,
I would like to know how do I download and install the software update on my iphone?

wireless upgrade is possible with iOS 5 or later I think

HT4623 How do I instal the software updates? My iphone does not show the software update

How to do I instal the software updates to my iphone?

Same as always.
Tun on your computer.
Open itunes
Connect iphone.
That's it. It will prompt you to update if one is available

I'm using a macbook pro with version 10.6.8 installed. whenever i try to install my software updates, it immediately asks me to restart my computer to finish the installation. after doing so and signing back on to my account no updates have been installed

I'm using a macbook pro with version 10.6.8 installed. Whenever I try to install my software updates, it immediately asks me to restart my computer to finish the installation. After doing so and signing back on to my account, nothing has changed and no updates have been installed. It still says the same 8 items need to be installed, and the same process occurs again. Any idea how I can fix this?

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

How to install new Software in Nokia N97

How to Install new software in my nokia n97 because i have latest 22.0.110 software and i like to have the new software from nokia .

Hello leosherifi, there will be an option in your phone itself for updating the software(SWupdate). Or else connect your phone to PC using Nokia suite then use the update present in it. If the update is available then only you will be able to update.
Nokia C7

I installed latest software updates today and now iphoto won't work at all - heeelllppp!

Hello
i installed latest software updates today and since then iphoto will not work at all. The window oens but it remains blank, and when I go to force quit it says iphoto not responding, so it's as if it's crashing on startup. I can't access my photo library or put new photos in the library from my camera, in fact I can't do anything at all with it.
I am in Africa a long way from home and tech support, so please can anyone help me?? Im a bit desperate as my whole photo library is inaccessible, and it will be months before I am back in the UK.
I am not hugeley techie so plain English please.
Thanks

Hardware Information:
          MacBook Pro (15-inch Core 2 Duo)
          MacBook Pro - model: MacBookPro2,2
          1 2.16 GHz Intel Core 2 Duo CPU: 2 cores
          3 GB RAM
Video Information:
          ATY,RadeonX1600 - VRAM: 128 MB
Startup Items:
          AdobeVersionCue: Path: /Library/StartupItems/AdobeVersionCue
          ADSLAutoConfig: Path: /Library/StartupItems/ADSLAutoConfig
          HWNetMgr: Path: /Library/StartupItems/HWNetMgr
          HWPortDetect: Path: /Library/StartupItems/HWPortDetect
          StartOuc: Path: /Library/StartupItems/StartOuc
System Software:
          Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:49:42
Disk Information:
          Hitachi HTS541612J9SA00 disk0 : (111.79 GB)
                    (null) (disk0s1) <not mounted>: 200 MB
                    Macintosh HD (disk0s2) /: 111.47 GB (6.45 GB free)
USB Information:
          JMicron USB to ATA/ATAPI bridge 111.79 GB
                    (null) (disk1s1) <not mounted>: 32 KB
                    Backup (disk1s3) <not mounted>: 111.67 GB
          Vodafone (Huawei) Vodafone Mobile Broadband (Huawei)
          Micron Built-in iSight
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.rim.driver.BlackBerryUSBDriverInt          (0.0.67)
          com.huawei.driver.cdc_usb_bus          (1.0.2)
          com.huawei.driver.cdc_acm          (2.6.2f17)
          com.huawei.driver.dc_net          (1.0.2)
          com.huawei.driver.cdc_ncm          (2.6.2f16)
          de.novamedia.driver.NMSmartplugSCSIDevice          (1.0.1)
Problem System Launch Daemons:
          [loaded] de.novamedia.nmnetmgrd.plist
          [not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
          [failed] com.apple.Kerberos.renew.plist
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.versioncueCS3.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.trusteer.rooks.rooksd.plist
          [failed] xxx.qnation.PeerGuardian.kextload.plist
Launch Agents:
          [loaded] com.adobe.CS4ServiceManager.plist
          [loaded] com.trusteer.rapport.rapportd.plist
          [loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist
          [failed] com.facebook.videochat.[redacted].plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          MTN Pocket Internet
          Microsoft AU Daemon
          Vodafone Mobile Broadband
          Vodafone Mobile Broadband
3rd Party Preference Panes:
          Adobe Version Cue CS3
          BDSPrefPane
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          Trusteer Endpoint Protection
Internet Plug-ins::
          Flip4Mac WMV Plugin: Version: 2.3.2.6
          FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
          JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
          Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
          AdobePDFViewer: Version: 9.5.5
          QuickTime Plugin: Version: 7.6.6
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          Google Earth Web Plug-in: Version: 7.1
          RealPlayer Plugin: Version: (null)
          Silverlight: Version: 4.0.50524.0
          iPhotoPhotocast: Version: 7.0
Bad Fonts:
          None
Old applications:
          None
Time Machine:
          Information not available
Top Processes by CPU:
              32%          firefox
              25%          Vodafone Mobile Broadband
               3%          EtreCheck
               2%          WindowServer
               1%          ps
Top Processes by Memory:
          289 MB          firefox
          86 MB          mds
          55 MB          Mail
          52 MB          WindowServer
          52 MB          Finder
Virtual Memory Statistics:
          1.44 GB          Free RAM
          846 MB          Active RAM
          427 MB          Inactive RAM
          324 MB          Wired RAM
          383 MB          Page-ins
          0 B          Page-outs

I installed an software Update on my MacBook Pro and after that my laptop wont reboot passed the gray screen?

After installing a software update on my Macbook Pro, it would not reboot passed the gray screen and then would shut down.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

HT3932 Keyboard Software Update for Windows?

Hi!
I've got a wireless Apple keyboard, paired with a PC. I want to activate the shortcuts (volume, brightness, etc.) but cannot find how to do it.
There is that Keyboard Software Update 1.2, but it's only for Macs...
Any ideas?

The Hosts might be willing to give it a try, but I'd wager a cookie that it wouldn't help. There are huge red letters above this forum telling people not to post technical questions here, but people do it all the time anyway. It can be annoying, I know, but people often just seem to get focused on what it is they're after and just don't notice they're in the wrong place, or they're confused and/or frustrated and post in the first place they can find. There's not much that can be done other than to gently redirect them to a more appropriate place to get assistance (and if you're Level 2 or above, you can notify on the post and ask that it be moved to the correct forum).
Regards.

How to undo OS software update from 10.8.3 back to 10.8.2?

Hi there,
I just updated my OS to 10.8.3. I have a Macbook Pro (mid 2012)
I originally wanted to install Windows 7 via Boot Camp.
In the recent 10.8.3 update, there is an update for Boot Camp (Boot Camp 5)
However, after I updated the OS update, I found out that Boot Camp 5 only supports 64-bit Windows 7. I have the 32-bit version.
So now I'm stuck.
Can someone please help me and tell me how to undo the software update?
Thank you,

There is no way to downgrade unless you have a backup of your old 10.8.2 system. If you do, you can restore to that state.
You may want to look here for other options:
https://discussions.apple.com/thread/4904594?start=0&tstart=0
I don't really know anything about Boot Camp, so I can't comment on the solution there.

Installing downloaded software updates

I'm having a bit of an epic trying to install downloaded software updates. My internet connection is via a USB dongle in a very poor signal area. I downloaded the updates for OS X 10.5.4 and it took me about 36 hours for the download alone. When I tried to install them I got a 'Software Update' box with a bar that was supposedly to fill in with blue shading. Only a tiny bit of the bar filled in and it remained like that for 8 hours the first time I tried and 12 hours the second time. On both occasions text above the bar said 'Installing 3 (or whatever) items' and text below the bar said 'Configuring Installation'. Nothing else happened, for hours. Eventually I simply switched off. I assume I have the software updates on my mac but just can't install them. How can I install them? And if I can't install them are they available to buy on disc? Or should I sell up and move to the city to live in broadband heaven? As you can see, it is all a bit time consuming and I'm not that literate in this sort of thing.
Any help would be appreciated.

Thanks Klaus1. I phoned an Apple store and they would only update my iMac if I brought it in but that would be a massive round trip for me (probably 9 hours). I then phoned AppleCare and they bluntly said that they could not send me a disc with the updates. Not good enough. There won't be too many mac users in the UK in the same situation as me so it wouldn't be too costly for Apple to post out updates to mac users who can prove their remoteness (postcodes, for example, could be used). Effectively what Apple seem to be saying is that if you can't access a strong signal then you will be disadvantaged and we will do nothing to help. Like I said, not good enough.
I'll sort it out in the end but I did expect more from AppleCare. I would happily pay them but even that made no impression on them.
Thanks again.

I can't install new software update!

I can't install new software update! for my Nokia 6500 slide.
when install the new software on to my laptop, Vista home premium, service pack one.
It give me this error "error 2738 could not access VBScript run time for cutom action".??????
Can anyone help me please?
How **bleep**.

Impossible to say without more details other than "I can't install". If you'll post full details, including whether you're attempting to update from the iPad directly or from iTunes on a computer, where things are breaking down, what error messages if any you're getting, and any other details pertinent to your issue, then someone can perhaps offer suggestions.
Regards.

Virtual Machine( VM WARE) using Windows Server 2008 R2- how to install a software from host to guest.

Dear All,
Can you Please tell how to install a software SQL Server 2012 from the Host to my Guest OS Windows Server 2008R2 in my Virtual Machine? I am using VMPlayer and have already created a VM using the Windows Server 2008R2.
I just need help in installing another software (SQLServer2012) from my laptop(guest computer) to my host VM. I also have the files downloaded into my C drive of my laptop(hostcomputer) for the SQL Server 2012. But I am lost as to where to click to install
this software to my VM.
I know I put into Windows Server 2012 forum but I thin the procedure should be similar.
Thank-you

there are few options,
you can copy the files from your host to virtual machine
you can create a iso file and mount it to vm
you can share the source files and access as a share
Darshana Jayathilake

How to install keyboard software update

Similar Messages

Maybe you are looking for