How to install lan card in solaris 11

Hi,
can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
When i do ifconfig -a it only displays loop back driver only
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
The other driver was missing can please some one tell me how to install that?

Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
http://www.oracle.com/webfolder/technetwork/hcl/index.html
There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

Similar Messages

  • How to installed java comm in solaris

    I have installed borland jbuilder5 enterprise edition,and
    put the libSolarisSerialParallel.so in LD_LIBRARY_PATH
    (LD_LIBRARY_PATH=/usr/lib), the comm.jar in jre\lib\,javax.comm.properties in jre\lib .
    But when I Open the serial port, the program always raise a exception "null".
    What can i do ?

    sorry :
    how to "installed" java comm in solaris
    --->
    how to install java comm in solaris

  • How to install OpenGL files on Solaris 10

    I found OpenGL stuff is missing from the Solaris 10 system when I installed gtkglext from its source code and got an error after the 'configure' command.
    bash-3.00$ ./configure
    checking GL/glx.h usability... no
    checking GL/glx.h presence... no
    checking for GL/glx.h... no
    configure: error: Cannot find GLX header
    I remember that for software groups during Solaris 10 installation, I did choose the Entire Solaris Software Group to guarantee the developement packages are installed. Could you give some help on how to install opengl stuff from Solaris 10 installation disks?

    It's hard to believe that no one here (official Sun
    developer network) can answer my question. Maybe few
    people develop under Solaris.That must be it.

  • Install network card on solaris 8 x86 10/1

    Hi
    how can I install my netwoek card on solaris 8 x86
    Thank a lot

    In the same way you install any other card. Plug the card in
    the slot., and install the appropriate solaris driver for that
    network card. May be you want to detail the problem, if this
    is not you are looking for.
    Thx
    Tushar Patel.

  • How to install puppet agent on solaris 10 sparc

    I would like to know how to install and configure puppet on solaris 10 sprc

    Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS.   That permits you to make very specific settings and not just generic global settings that could conflict with other software.
    Can you tell us what research you have done on the topic? 
    For example, have you glanced through a Google search on "solaris web proxy" ?
    If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space.   What application software will you be using?

  • How to install NetBeans6.5 in Solaris

    Hi All,
    I am new to the forum and this is my first question. I have installed NetBeans 6.5 in windows system. But my source code is in Solaris can be accessed using clearCase vobs.I have two questions to ask:-
    1. How to install NetBeans 6.5 in Solaris
    2. How to access source code from clearCase vobs to NetBeans
    Hope to get a proper solution from the forum as this is urgent.
    Thanks in advance,

    Sorry, a first generation iPod Touch can not be upgraded beyond 3.1.3.

  • How to install sim card

    How do I install sim card in my iphone.  I took it out to clean and dont remembeer its placement on the sim card slide

  • How to install new card to the existing 15454

    i have new cards which is CISCO 2.5Gbps Multi-rate DataMuxponder 4ch 1558.17-1560.61 (15454-DM-L1-58.1=).
    if i install to the existing system, is it will affect the system?
    do i need to reconfigure the existing system using DWDM metroplanner before install the new cards?
    what are the correct steps to install the new cards?
    thank you

    Hi,
    Answers to
    1/, no it will not affect your system as these cards are hot pluggable, and as long as you insert into the right slot (refer to the Cisco documentation)
    On this Cisco web page, http://www.cisco.com/en/US/products/hw/optical/ps2006/prod_installation_guides_list.html
    2/ you should not for minor card addition like this.
    3/ you will find the procedure document for the applicable rel of ONS software you are running.  The procedure will have a section that documents steps to install various card type.
    Hope this helps.
    cheers,

  • How to install Oracle 10g on Solaris 10 non-global zone.

    Hi,
    I want to install Oracle 10g on Solaris non global zone with ASM.
    I need complete doc for doing the same.
    REgards
    S.Ali

    Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

  • Help! How to install graphics card driver?

    I installed a Solaris 8 system on Intel platform with S3 Savage 4 graphics
    card equipped. Seems Solaris doesn't support this card, so I downloaded a
    driver file named savage_drv.o from somewhere. How can I install it
    under Solaris to replace default standard VGA card I installed during
    installation.
    Thanks

    i'm in the same situation. i have solaris 8 x86 and i went to http://www.probo.com/timr/savage40.html and downloaded the savage_drv.o driver as well (because it's the only hope i've found related to running a savage4 on this platform) and i'm not sure how to go about switching out this driver for the VGA driver that's currently implemented. there are no instructions about this on the site, the only real instructions are for linux/bsd and those are pretty much no-brainers anyway.
    if ANYONE knows how to do this that would be great. thanks in advance!

  • Installing network card in solaris 7 intel version

    hai,
    i installed solaris 7 in a intel platform. but the network card is not getting recoganised. the card is Compex Readlink RL2000 pci card. how i will configure it. please help me.
    shibin

    If the card is not recognized, then it's probably unsupported by solaris.
    Either you can get a solaris 7 driver from the card's vendor, or you
    get a new nic that is support under solaris 7.

  • How to install video card - G450 for solaris8

    hi everbody:
    when i installed solaris 8, the supported video card driver list didn't contain the G450, so i got the patch from sun website, the driver patch looks like 109401-11,is it right?
    and then how can i do next?? BTW,I still fail to install solaris8 because of missing driver G450.

    you can install it without the CDE,log on as root
    use patchadd command to install the patch
    run kdsconfig to test the the screen to see if it can work properly. Then reboot.
    hope this can help.
    Good luck

  • How to install .ttf fonts in Solaris 10 x86 10/08 ?

    Hi,
    I have installed Solaris 10 x86 10/08 on my Pentium-II machine. It is working fine. I am using Java Desktop Session 3 (JDS3).
    I have to install a few true type fonts (.ttf) to the machine and make it accessible in the gnome-terminal. I have the font files, that is .ttf files, in my system, but they are not installed.
    Could you please give me the procedure to achieve this? Should I install any patches for this?
    Regards,
    Sreeram

    Hello Lubos Kocman,
    Thanks for your reply. I followed your suggestion and put the .ttf fonts in the /usr/X11/lib/X11/fonts/TrueType directory and rebooted the system.
    [Actually, you had mentioned to put them in /usr/X11/lib/X11/fonts/TTF directory. But I did not find the TTF directory. Instead I found TrueType directory and so I felt it appropriate to place them here.]
    But still I am unable to access and choose those fonts from my gnome-terminal's font list. Have I missed something? The same result was obtained when I placed the fonts in the ~/.fonts directory also. Please guide me if I am doing something wrong.
    How do we ensure that the system has recognised the fonts which have been installed newly? Any commands to confirm this? Are there any log files pertaining to fonts, where we can know whether the fonts were recognised by the system, and if not recognised, the reason for the same?
    Also, I would like to paste the contents of /etc/release of my system:
    Solaris 10 10/08 s10x_u6wos_07b X86
    Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 27 October 2008
    Should I install any patches to this version of Solaris 10 to get the .ttf fonts installed. As mentioned earlier, I am using Java Desktop System, Release 3 desktop.
    Kindly guide me in installing/accessing the .ttf fonts.
    Regards,
    Sreeram

  • How to install 3c905c NIC in Solaris 8 in SPARC platform

    i bought a 3c905c NIC. I want to install it into SUN Blade 100 (SPARC platform) Solaris 8. I do need help how can I configure this NIC?tks.

    From what I have seen the SPARC based systems don't have drivers for anything other than Sun hardware. I am presently working on a 3C90x and Intel Pro/100 driver for the Ultra Sparc series.
    James

  • How to install Ethernet card on Toshiba Satellite 2105CDS.

    I installed Solaris 8 on my Toshiba(Satellite 2105CDS) laptop.
    I am not able to install Linksys ethernet(pci) card.
    Can anyone please help me in solving this problem.
    Thanking you.
    John
    email : [email protected]

    Ask Linksys for a driver.
    Sadly the only supported PCMCIA (not not PCcard) device is the 3C589. I use these and they work fine.
    You may need to apply the PCMCIA patch from www.xig.com

Maybe you are looking for

  • Share M4P music on same computer with different windows Sessions

    According to the guidelines provided on this site, I already shared my music folder to enable different users on my single computer to access shared music files. I kept different libraries to provide each user a different library to keep perosnal pla

  • Problem with Light Room 5 with exporting?

    Just today my LightRM 5 stopped exporting photos to my desktop.  What to do/?   Dolores

  • OSO opportunities with future date not showing up

    When you search organization and click on opportunites you can all the opportunities loaded with close date of 30jun2011 (fiscal year end) not the onles after this date. How and where do I need to look for thsi set up update to display opportunites f

  • COPA Data Flow

    Dear Experts My client requirements is sales order and finished material based profitability I want to know that If I create Sales order  and material as my Characteristic Field what will be my Value field and how do we map, so that we can get Profit

  • Problem with backlight....

    More correctly, problems when the backlight is NOT on. I have a 3G iPod 15 gb and I can only see the screen when the backlight is on. If I power down the backlight then the text disappears. The same is true if the backlight threshhold is passed and t